- Home
- Publications
- Publication Search
- Publication Details
Title
Additive Manufacturing of Ceramic-Based Materials
Authors
Keywords
-
Journal
ADVANCED ENGINEERING MATERIALS
Volume 16, Issue 6, Pages 729-754
Publisher
Wiley
Online
2014-04-08
DOI
10.1002/adem.201400097
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Designing with Pores - Synthesis and Applications
- (2014) Jan Luyten et al. KONA Powder and Particle Journal
- Mechanical properties of bioactive glass (13-93) scaffolds fabricated by robotic deposition for structural bone repair
- (2013) Xin Liu et al. Acta Biomaterialia
- New depowdering-friendly designs for three-dimensional printing of calcium phosphate bone substitutes
- (2013) A. Butscher et al. Acta Biomaterialia
- 3D Printing of Interdigitated Li-Ion Microbattery Architectures
- (2013) Ke Sun et al. ADVANCED MATERIALS
- Size-dependent degradation and bioactivity of borate bioactive glass
- (2013) Aylin M. Deliormanlı CERAMICS INTERNATIONAL
- Printing of uniform PZT thin films for MEMS applications
- (2013) S.P. Bathurst et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- On the structural, mechanical, and biodegradation properties of HA/β-TCP robocast scaffolds
- (2013) Manuel Houmard et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Additive manufacturing of alumina parts by indirect selective laser sintering and post processing
- (2013) Khuram Shahzad et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Rheological Characterization of Aqueous 3Y-TZP Inks Optimized for Direct Thermal Ink-Jet Printing of Ceramic Components
- (2013) Emre Özkol JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Robocasting of alumina hollow filament lattice structures
- (2013) Tobias Schlordt et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Depth and width of cured lines in photopolymerizable ceramic suspensions
- (2013) Susan P. Gentry et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Additive manufacturing of zirconia parts by indirect selective laser sintering
- (2013) Khuram Shahzad et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Robocasting of 45S5 bioactive glass scaffolds for bone tissue engineering
- (2013) Siamak Eqtesadi et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Enhanced sintering ability of biphasic calcium phosphate by polymers used for bone scaffold fabrication
- (2013) Chengde Gao et al. Materials Science & Engineering C-Materials for Biological Applications
- Moisture based three-dimensional printing of calcium phosphate structures for scaffold engineering
- (2012) A. Butscher et al. Acta Biomaterialia
- Processing of ceramic–metal composites
- (2012) N Travitzky Advances in Applied Ceramics
- Surface roughness and geometrical characterization of ultra-thick micro moulds for ceramic micro fabrication using soft lithography
- (2012) H. Hassanin et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Geometrically Complex Silicon Carbide Structures Fabricated by Robocasting
- (2012) Kunpeng Cai et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Sintering of 3D-Printed Glass/HAp Composites
- (2012) Alexander Winkel et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Ink-jet printing of micro-emulsion TiO2 nano-particles ink on the surface of glass
- (2012) Maryam Hosseini Zori et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Potentials of the “Direct inkjet printing” method for manufacturing 3Y-TZP based dental restorations
- (2012) Emre Özkol et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Direct-write assembly of silicate and borate bioactive glass scaffolds for bone repair
- (2012) Aylin M. Deliormanlı et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Stereolithography process: Influence of the rheology of silica suspensions and of the medium on polymerization kinetics – Cured depth and width
- (2012) T. Chartier et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Robotic deposition of 3d nanocomposite and ceramic fiber architectures via UV curable colloidal inks
- (2012) Yoram de Hazan et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Microwave-sintered 3D printed tricalcium phosphate scaffolds for bone tissue engineering
- (2012) Solaiman Tarafder et al. Journal of Tissue Engineering and Regenerative Medicine
- Robocasting chitosan/nanobioactive glass dual-pore structured scaffolds for bone engineering
- (2012) Biligzaya Dorj et al. MATERIALS LETTERS
- A simple recipe for direct writing complex 45S5 Bioglass® 3D scaffolds
- (2012) Siamak Eqtesadi et al. MATERIALS LETTERS
- Three-dimensional printing of SiSiC lattice truss structures
- (2012) Z. Fu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effective fabrication method of 3D ceramic photonic crystals with diamond structure
- (2012) Shibin Chen et al. RAPID PROTOTYPING JOURNAL
- Fabrication of a bio‐inspired beta‐Tricalcium phosphate/collagen scaffold based on ceramic stereolithography and gel casting for osteochondral tissue engineering
- (2012) Weiguo Bian et al. RAPID PROTOTYPING JOURNAL
- Isostatic pressing assisted indirect selective laser sintering of alumina components
- (2012) J. Deckers et al. RAPID PROTOTYPING JOURNAL
- Effect of chemical vapor infiltration of Si3N4 on the mechanical and dielectric properties of porous Si3N4 ceramic fabricated by a technique combining 3-D printing and pressureless sintering
- (2012) Xiangming Li et al. SCRIPTA MATERIALIA
- Gel-cast glass-ceramic tissue scaffolds of controlled architecture produced via stereolithography of moulds
- (2012) K Chopra et al. Biofabrication
- Direct ink writing of highly porous and strong glass scaffolds for load-bearing bone defects repair and regeneration
- (2011) Qiang Fu et al. Acta Biomaterialia
- Printability of calcium phosphate powders for three-dimensional printing of tissue engineering scaffolds
- (2011) Andre Butscher et al. Acta Biomaterialia
- Reaction-bonded SiC derived from resin precursors by Stereolithography
- (2011) Xiaoyong Tian et al. CERAMICS INTERNATIONAL
- Ferrosilicochromium-Filled Polymer-Derived Ceramics
- (2011) Lorenz Schlier et al. International Journal of Applied Ceramic Technology
- Macro-Cellular Silicon carbide Reactors for Nonstationary Combustion Under Piston Engine-Like Conditions
- (2011) Lorenz Schlier et al. International Journal of Applied Ceramic Technology
- Ink Jet Printing for Functional Ceramic Coatings
- (2011) M. Vilardell et al. JOURNAL OF IMAGING SCIENCE AND TECHNOLOGY
- Catenary shape evolution of spanning structures in direct-write assembly of colloidal gels
- (2011) Cheng Zhu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Freeze extrusion fabrication of 13–93 bioactive glass scaffolds for bone repair
- (2011) Nikhil D. Doiphode et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Photopolymerization kinetics of a polyether acrylate in the presence of ceramic fillers used in stereolithography
- (2011) A. Badev et al. JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY
- Three-Dimensional Printing of Ti3SiC2-Based Ceramics
- (2011) Beiya Nan et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Functional ceramic and nanocomposite fibers, cellular articles and microspheres via radiation curable colloidal dispersions
- (2011) Yoram de Hazan et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Slurry-based selective laser sintering of polymer-coated ceramic powders to fabricate high strength alumina parts
- (2011) Hwa-Hsing Tang et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Inkjet printing ceramics: From drops to solid
- (2011) B. Derby JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Rheology of UV curable colloidal silica dispersions for rapid prototyping applications
- (2011) Maciej Wozniak et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Porous and strong bioactive glass (13–93) scaffolds fabricated by freeze extrusion technique
- (2011) T.S. Huang et al. Materials Science & Engineering C-Materials for Biological Applications
- Laminated object manufacturing of LZSA glass‐ceramics
- (2011) Cynthia Gomes et al. RAPID PROTOTYPING JOURNAL
- Printed Origami Structures
- (2010) Bok Yeop Ahn et al. ADVANCED MATERIALS
- Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution
- (2010) Brian Derby Annual Review of Materials Research
- Designing colloidal suspensions for directed materials assembly
- (2010) Jacinta C. Conrad et al. CURRENT OPINION IN COLLOID & INTERFACE SCIENCE
- The influence of ingredients of silica suspensions and laser exposure on UV curing behavior of aqueous ceramic suspensions in stereolithography
- (2010) Weizhao Zhou et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Analysis of ceramic shell cracking in stereolithography-based rapid casting of turbine blade
- (2010) Xiaojie Chen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of Residual Monomer on Cracking in Ceramics Fabricated by Stereolithography
- (2010) Chang-Jun Bae et al. International Journal of Applied Ceramic Technology
- Solid freeform fabrication and characterization of porous calcium polyphosphate structures for tissue engineering purposes
- (2010) Yaser Shanjani et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- 3D printing of Al2O3/Cu–O interpenetrating phase composite
- (2010) Reinhold Melcher et al. JOURNAL OF MATERIALS SCIENCE
- Three-dimensional printing of flash-setting calcium aluminate cement
- (2010) Anne-Kathrin Maier et al. JOURNAL OF MATERIALS SCIENCE
- Suspension Stability and Fractal Patterns: A Comparison using Hydroxyapatite
- (2010) Feng Gao et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Rheological Properties of Aqueous Si3N4 and MoSi2 Suspensions Tailor-Made for Direct Inkjet Printing
- (2010) Benjamin Cappi et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- An experimental analysis of the influence of the ink properties on the drop formation for direct thermal inkjet printing of high solid content aqueous 3Y-TZP suspensions
- (2010) Emre Özkol et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- 3D printing of bone substitute implants using calcium phosphate and bioactive glasses
- (2010) Christian Bergmann et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- A novel aqueous ceramic suspension for ceramic stereolithography
- (2010) Weizhao Zhou et al. RAPID PROTOTYPING JOURNAL
- The effect of processing parameters on characteristics of selective laser sintering dental glass‐ceramic powder
- (2010) Jie Liu et al. RAPID PROTOTYPING JOURNAL
- Direct write assembly of calcium phosphate scaffolds using a water-based hydrogel
- (2009) J. Franco et al. Acta Biomaterialia
- 3D Powder Printing of β-Tricalcium Phosphate Ceramics Using Different Strategies
- (2009) E. Vorndran et al. ADVANCED ENGINEERING MATERIALS
- Polymer-Derived Ceramics for Advanced Bearing Applications
- (2009) M. Steinau et al. ADVANCED ENGINEERING MATERIALS
- Characterizations of Magnetron Sputtered CrSiN/ZrN Multilayer Coatings-from Structure to Tribological Behaviors
- (2009) Zhiguo Zhang et al. ADVANCED ENGINEERING MATERIALS
- Ultraviolet-Assisted Direct-Write Fabrication of Carbon Nanotube/Polymer Nanocomposite Microcoils
- (2009) Louis Laberge Lebel et al. ADVANCED MATERIALS
- Photocatalytic reaction intensification using monolithic supports designed by stereolithography
- (2009) M. Furman et al. CHEMICAL ENGINEERING AND PROCESSING
- High solids loading ceramic colloidal dispersions in UV curable media via comb-polyelectrolyte surfactants
- (2009) Yoram De Hazan et al. JOURNAL OF COLLOID AND INTERFACE SCIENCE
- Direct Inkjet Printing of Dental Prostheses Made of Zirconia
- (2009) J. Ebert et al. JOURNAL OF DENTAL RESEARCH
- Rapid fabrication of alumina-based ceramic cores for gas turbine blades by stereolithography and gelcasting
- (2009) Haihua Wu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fabrication of 3D biocompatible/biodegradable micro-scaffolds using dynamic mask projection microstereolithography
- (2009) Jae-Won Choi et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fabrication and evaluation of solid freeformed electromagnetic bandgap structures
- (2009) Xuesong Lu et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- Colloidal Processing of Glass-Ceramics for Laminated Object Manufacturing
- (2009) Cynthia M. Gomes et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Optical characterization of stereolithography alumina suspensions using the Kubelka–Munk model
- (2009) Y. Abouliatim et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Highly loaded UV curable nanosilica dispersions for rapid prototyping applications
- (2009) Maciej Wozniak et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Solvent-based paste extrusion solid freeforming
- (2009) Xuesong Lu et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Curing characteristics of ceramic stereolithography for an aqueous-based silica suspension
- (2009) Z Chen et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Direct fabrication of an integral ceramic mould by stereolithography
- (2009) W Z Zhou et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Stereolithography fabrication and characterization of syntactic foams containing hollow glass microspheres
- (2009) T Roques-Carmes et al. RUSSIAN CHEMICAL REVIEWS
- The morphology of anisotropic 3D-printed hydroxyapatite scaffolds
- (2008) Fabienne C. Fierz et al. BIOMATERIALS
- Rheological behavior of PMN gels for solid freeform fabrication
- (2008) Aylin Şakar-Deliormanlı et al. COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
- Microstructural Characterization and Mechanical Properties of Si3N4Formed by Fused Deposition of Ceramics
- (2008) S. Iyer et al. International Journal of Applied Ceramic Technology
- LZSA glass-ceramic laminates: Fabrication and mechanical properties
- (2008) Cynthia M. Gomes et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Aqueous-based extrusion of high solids loading ceramic pastes: Process modeling and control
- (2008) Michael S. Mason et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Surface roughness prediction using measured data and interpolation in layered manufacturing
- (2008) Daekeon Ahn et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fine lattice structures fabricated by extrusion freeforming: Process variables
- (2008) Xuesong Lu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Selective laser sintering of barium titanate–polymer composite films
- (2008) A. T. Clare et al. JOURNAL OF MATERIALS SCIENCE
- Dissolution characteristics of extrusion freeformed hydroxyapatite–tricalcium phosphate scaffolds
- (2008) H. Y. Yang et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Preceramic Paper-Derived Ceramics
- (2008) Nahum Travitzky et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Tailor-made ceramic-based components—Advantages by reactive processing and advanced shaping techniques
- (2008) Rolf Janssen et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Direct inkjet printing of Si3N4: Characterization of ink, green bodies and microstructure
- (2008) B. Cappi et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Manufacture of 3D structures by cold low pressure lamination of ceramic green tapes
- (2008) Karin Schindler et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Development of high solid content aqueous 3Y-TZP suspensions for direct inkjet printing using a thermal inkjet printer
- (2008) E. Özkol et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Ink-jet printing of ceramic micro-pillar arrays
- (2008) M. Lejeune et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Slurry deposition by airbrush for selective laser sintering of ceramic components
- (2008) Anja M. Waetjen et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Structure of Colloidal Gels during Microchannel Flow
- (2008) Jacinta C. Conrad et al. LANGMUIR
- Rapid prototyping of ceramic lattices for hard tissue scaffolds
- (2008) Shoufeng Yang et al. MATERIALS & DESIGN
- The finite element analysis of melt flow behaviour in micro-injection moulding
- (2008) C A Griffiths et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Mechanical properties of calcium phosphate scaffolds fabricated by robocasting
- (2007) Pedro Miranda et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now