Current Challenges and Opportunities in Microstructure-Related Properties of Advanced High-Strength Steels
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Current Challenges and Opportunities in Microstructure-Related Properties of Advanced High-Strength Steels
Authors
Keywords
-
Journal
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
Volume 51, Issue 11, Pages 5517-5586
Publisher
Springer Science and Business Media LLC
Online
2020-09-06
DOI
10.1007/s11661-020-05947-2
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Intragranular three-dimensional stress tensor fields in plastically deformed polycrystals
- (2020) Yujiro Hayashi et al. SCIENCE
- Reconstructing intragranular strain fields in polycrystalline materials from scanning 3DXRD data
- (2020) N. Axel Henningsson et al. JOURNAL OF APPLIED CRYSTALLOGRAPHY
- Solute hydrogen and deuterium observed at the near atomic scale in high-strength steel
- (2020) Andrew J. Breen et al. ACTA MATERIALIA
- Multi-component chemo-mechanics based on transport relations for the chemical potential
- (2020) P. Shanthraj et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- High-strength Damascus steel by additive manufacturing
- (2020) Philipp Kürnsteiner et al. NATURE
- Magnetic Evaluation of Tensile Deformation Behaviour of TRIP Assisted Steels
- (2019) J. N. Mohapatra et al. JOURNAL OF NONDESTRUCTIVE EVALUATION
- Machine learning assisted design of high entropy alloys with desired property
- (2019) Cheng Wen et al. ACTA MATERIALIA
- Multi-scale characterization of austenite reversion and martensite recovery in a cold-rolled medium-Mn steel
- (2019) J.T. Benzing et al. ACTA MATERIALIA
- First-principles study on the grain boundary embrittlement of bcc-Fe by Mn segregation
- (2019) Kazuma Ito et al. PHYSICAL REVIEW MATERIALS
- The role of lattice defects, element partitioning and intrinsic heat effects on the microstructure in selective laser melted Ti-6Al-4V
- (2019) Jan Haubrich et al. ACTA MATERIALIA
- Thermodynamics of grain boundary segregation, interfacial spinodal and their relevance for nucleation during solid-solid phase transitions
- (2019) A. Kwiatkowski da Silva et al. ACTA MATERIALIA
- The effect of strain on interphase precipitation characteristics in a Ti-Mo steel
- (2019) Ilias Bikmukhametov et al. ACTA MATERIALIA
- Metastability alloy design
- (2019) Dierk Raabe et al. MRS BULLETIN
- Quantification of solute deuterium in titanium deuteride by atom probe tomography with both laser pulsing and high-voltage pulsing: influence of the surface electric field
- (2019) Y H Chang et al. NEW JOURNAL OF PHYSICS
- A Review of the Application of Machine Learning and Data Mining Approaches in Continuum Materials Mechanics
- (2019) Frederic E. Bock et al. Frontiers in Materials
- Segregation-driven grain boundary spinodal decomposition as a pathway for phase nucleation in a high-entropy alloy
- (2019) Linlin Li et al. ACTA MATERIALIA
- Macro-to nanoscopic in situ investigation on yielding mechanisms in ultrafine grained medium Mn steels: role of the austenite-ferrite interface
- (2019) Binhan Sun et al. ACTA MATERIALIA
- Kinetic theory of nucleation in multicomponent systems: An application of the thermodynamic extremum principle
- (2019) Manon Bonvalet-Rolland et al. ACTA MATERIALIA
- Overview of metastability and compositional complexity effects for hydrogen-resistant iron alloys: Inverse austenite stability effects
- (2019) Motomichi Koyama et al. ENGINEERING FRACTURE MECHANICS
- Formation mechanism of dislocation patterns under low cycle fatigue of a high-manganese austenitic TRIP steel with dominating planar slip mode
- (2019) Dayong An et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Large-area, high-resolution characterisation and classification of damage mechanisms in dual-phase steel using deep learning
- (2019) Carl Kusche et al. PLoS One
- Computer-Integrated Platform for Automatic, Flexible, and Optimal Multivariable Design of a Hot Strip Rolling Technology Using Advanced Multiphase Steels
- (2019) Rauch et al. Metals
- High-entropy alloys
- (2019) Easo P. George et al. Nature Reviews Materials
- Atomistic phase field chemomechanical modeling of dislocation-solute-precipitate interaction in Ni–Al–Co
- (2019) Jaber Rezaei Mianroodi et al. ACTA MATERIALIA
- Experimental and numerical study of mechanical properties of multi-phase medium-Mn TWIP-TRIP steel: Influences of strain rate and phase constituents
- (2019) J.T. Benzing et al. ACTA MATERIALIA
- Microstructure-based multiscale modeling of large strain plastic deformation by coupling a full-field crystal plasticity-spectral solver with an implicit finite element solver
- (2019) Fengbo Han et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A property-oriented design strategy for high performance copper alloys via machine learning
- (2019) Changsheng Wang et al. npj Computational Materials
- Solving Material Mechanics and Multiphysics Problems of Metals with Complex Microstructures using DAMASK – The Düsseldorf Advanced Material Simulation Kit
- (2019) Martin Diehl et al. ADVANCED ENGINEERING MATERIALS
- Unravelling the effect of hydrogen on microstructure evolution under low-cycle fatigue in a high-manganese austenitic TWIP steel
- (2019) Dayong An et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Steels in additive manufacturing: A review of their microstructure and properties
- (2019) P. Bajaj et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Dependence of hydrogen embrittlement mechanisms on microstructure-driven hydrogen distribution in medium Mn steels
- (2019) Binhan Sun et al. ACTA MATERIALIA
- Quantitative multiscale correlative microstructure analysis of additive manufacturing of stainless steel 316L processed by selective laser melting
- (2019) Matjaž Godec et al. MATERIALS CHARACTERIZATION
- A novel ultra-high strength maraging steel with balanced ductility and creep resistance achieved by nanoscale β-NiAl and Laves phase precipitates
- (2018) L. Sun et al. ACTA MATERIALIA
- The effect of deformation twins on the quasi-cleavage crack propagation in twinning-induced plasticity steels
- (2018) Z.C. Luo et al. ACTA MATERIALIA
- Ab initio simulation of hydrogen-induced decohesion in cementite-containing microstructures
- (2018) Eunan J. McEniry et al. ACTA MATERIALIA
- Origin of hydrogen trapping site in vanadium carbide precipitation strengthening steel
- (2018) Jun Takahashi et al. ACTA MATERIALIA
- Competition between formation of carbides and reversed austenite during tempering of a medium-manganese steel studied by thermodynamic-kinetic simulations and atom probe tomography
- (2018) A. Kwiatkowski da Silva et al. ACTA MATERIALIA
- Spatially resolved localization and characterization of trapped hydrogen in zero to three dimensional defects inside ferritic steel
- (2018) Waldemar Krieger et al. ACTA MATERIALIA
- Atom probe tomography study of Fe-Ni-Al-Cr-Ti ferritic steels with hierarchically-structured precipitates
- (2018) Sung-Il Baik et al. ACTA MATERIALIA
- On the diffusive phase transformation mechanism assisted by extended dislocations during creep of a single crystal CoNi-based superalloy
- (2018) Surendra Kumar Makineni et al. ACTA MATERIALIA
- Twinning-induced plasticity (TWIP) steels
- (2018) Bruno C. De Cooman et al. ACTA MATERIALIA
- Overview on micro- and nanomechanical testing: New insights in interface plasticity and fracture at small length scales
- (2018) G. Dehm et al. ACTA MATERIALIA
- Contribution of austenite-martensite transformation to deformability of advanced high strength steels: From atomistic mechanisms to microstructural response
- (2018) F. Maresca et al. ACTA MATERIALIA
- Deep learning approaches for mining structure-property linkages in high contrast composites from simulation datasets
- (2018) Zijiang Yang et al. COMPUTATIONAL MATERIALS SCIENCE
- An online tool for predicting fatigue strength of steel alloys based on ensemble data mining
- (2018) Ankit Agrawal et al. INTERNATIONAL JOURNAL OF FATIGUE
- An integrated crystal plasticity–phase field model for spatially resolved twin nucleation, propagation, and growth in hexagonal materials
- (2018) C. Liu et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Experimental–numerical study on strain and stress partitioning in bainitic steels with martensite–austenite constituents
- (2018) Noriki Fujita et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Temperature dependent strain hardening and fracture behavior of TWIP steel
- (2018) Manjunatha Madivala et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Correlative Microscopy—Novel Methods and Their Applications to Explore 3D Chemistry and Structure of Nanoscale Lattice Defects: A Case Study in Superalloys
- (2018) S. K. Makineni et al. JOM
- Nanoscale Analysis of Corrosion Products: A Review of the Application of Atom Probe and Complementary Microscopy Techniques
- (2018) Katja Eder et al. JOM
- Impact of local electrostatic field rearrangement on field ionization
- (2018) Shyam Katnagallu et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- Finite-deformation phase-field chemomechanics for multiphase, multicomponent solids
- (2018) Bob Svendsen et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Hardness and modulus of Fe 2 B, Fe 3 (C,B), and Fe 23 (C,B) 6 borides and carboborides in the Fe-C-B system
- (2018) Jonathan Lentz et al. MATERIALS CHARACTERIZATION
- Advanced data mining in field ion microscopy
- (2018) Shyam Katnagallu et al. MATERIALS CHARACTERIZATION
- Development of high modulus steels based on the Fe – Cr – B system
- (2018) C. Baron et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Precipitation and clustering in a Ti-Mo steel investigated using atom probe tomography and small-angle neutron scattering
- (2018) S. Dhara et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of strain rate on mechanical properties and deformation behavior of an austenitic Fe-25Mn-3Al-3Si TWIP-TRIP steel
- (2018) J.T. Benzing et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions
- (2018) Binhan Sun et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Simulation of the Growth of Austenite from As-Quenched Martensite in Medium Mn Steels
- (2018) Fei Huyan et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Strain-Induced Asymmetric Line Segregation at Faceted Si Grain Boundaries
- (2018) Christian H. Liebscher et al. PHYSICAL REVIEW LETTERS
- Generation of 3D representative volume elements for heterogeneous materials: A review
- (2018) Swantje Bargmann et al. PROGRESS IN MATERIALS SCIENCE
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- Atomic worlds: Current state and future of atom probe tomography in geoscience
- (2018) D.W. Saxey et al. SCRIPTA MATERIALIA
- Three-dimensional atom probe analysis of boron segregation at austenite grain boundary in a low carbon steel - Effects of boundary misorientation and quenching temperature
- (2018) Goro Miyamoto et al. SCRIPTA MATERIALIA
- Spatially correlated electron microscopy and atom probe tomography: Current possibilities and future perspectives
- (2018) M. Herbig SCRIPTA MATERIALIA
- Generation of statistically representative synthetic three-dimensional microstructures
- (2018) Sudipto Mandal et al. SCRIPTA MATERIALIA
- Atomic scale analysis of grain boundary deuteride growth front in Zircaloy-4
- (2018) A.J. Breen et al. SCRIPTA MATERIALIA
- Overcoming the drawbacks of plastic strain estimation based on KAM
- (2018) Rickard R. Shen et al. ULTRAMICROSCOPY
- Systematic approaches for targeting an atom-probe tomography sample fabricated in a thin TEM specimen: Correlative structural, chemical and 3-D reconstruction analyses
- (2018) Sung-Il Baik et al. ULTRAMICROSCOPY
- Machine-learning-based atom probe crystallographic analysis
- (2018) Ye Wei et al. ULTRAMICROSCOPY
- Phase nucleation through confined spinodal fluctuations at crystal defects evidenced in Fe-Mn alloys
- (2018) A. Kwiatkowski da Silva et al. Nature Communications
- Advanced Steel Microstructural Classification by Deep Learning Methods
- (2018) Seyed Majid Azimi et al. Scientific Reports
- Accelerated atomic-scale exploration of phase evolution in compositionally complex materials
- (2018) Y. J. Li et al. Materials Horizons
- A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties
- (2018) Haniyeh Fayazfar et al. MATERIALS & DESIGN
- Formation of eta carbide in ferrous martensite by room temperature aging
- (2018) W. Lu et al. ACTA MATERIALIA
- Numerical Benchmark of Phase-Field Simulations with Elastic Strains: Precipitation in the Presence of Chemo-Mechanical Coupling
- (2018) Reza Darvishi Kamachali et al. COMPUTATIONAL MATERIALS SCIENCE
- Atom probe tomography of nanoscale architectures in functional materials for electronic and photonic applications
- (2018) Alexander S. Chang et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- Overview of Dynamic Strain Aging and Associated Phenomena in Fe–Mn–C Austenitic Steels
- (2018) Motomichi Koyama et al. ISIJ INTERNATIONAL
- A method for site-specific and cryogenic specimen fabrication of liquid/solid interfaces for atom probe tomography
- (2018) D.K. Schreiber et al. ULTRAMICROSCOPY
- Development of 3rd generation Medium Mn duplex steels for automotive applications
- (2018) Astrid Perlade et al. MATERIALS SCIENCE AND TECHNOLOGY
- A Study of Parameters Affecting Atom Probe Tomography Specimen Survivability
- (2018) Ty J. Prosa et al. MICROSCOPY AND MICROANALYSIS
- The Laplace Project: An integrated suite for preparing and transferring atom probe samples under cryogenic and UHV conditions
- (2018) Leigh T. Stephenson et al. PLoS One
- Design of high-manganese steels for additive manufacturing applications with energy-absorption functionality
- (2018) Fabian Kies et al. MATERIALS & DESIGN
- Machine learning in materials design and discovery: Examples from the present and suggestions for the future
- (2018) J. E. Gubernatis et al. PHYSICAL REVIEW MATERIALS
- Joint non-rigid image registration and reconstruction for quantitative atomic resolution scanning transmission electron microscopy
- (2018) Benjamin Berkels et al. ULTRAMICROSCOPY
- Magnetic properties of a 17.6 Mn-TRIP steel: Study of strain-induced martensite formation, austenite reversion, and athermal α′-formation
- (2018) I.R. Souza Filho et al. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
- DAMASK – The Düsseldorf Advanced Material Simulation Kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale
- (2018) F. Roters et al. COMPUTATIONAL MATERIALS SCIENCE
- Carbon and strain partitioning in a quenched and partitioned steel containing ferrite
- (2018) Xiaodong Tan et al. ACTA MATERIALIA
- Establishing structure-property localization linkages for elastic deformation of three-dimensional high contrast composites using deep learning approaches
- (2018) Zijiang Yang et al. ACTA MATERIALIA
- Enumeration of the hydrogen-enhanced localized plasticity mechanism for hydrogen embrittlement in structural materials
- (2018) May L. Martin et al. ACTA MATERIALIA
- The predominant role of strain-induced vacancies in hydrogen embrittlement of steels: Overview
- (2018) Michihiko Nagumo et al. ACTA MATERIALIA
- Martensite to austenite reversion in a high-Mn steel: Partitioning-dependent two-stage kinetics revealed by atom probe tomography, in-situ magnetic measurements and simulation
- (2018) I.R. Souza Filho et al. ACTA MATERIALIA
- Revealing fracture mechanisms of medium manganese steels with and without delta-ferrite
- (2018) Binhan Sun et al. ACTA MATERIALIA
- Evaluation of an inverse methodology for estimating constitutive parameters in face-centered cubic materials from single crystal indentations
- (2017) Aritra Chakraborty et al. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
- Effects of lamella size and connectivity on fatigue crack resistance of TRIP-maraging steel
- (2017) Z. Zhang et al. INTERNATIONAL JOURNAL OF FATIGUE
- Overview of hydrogen embrittlement in high-Mn steels
- (2017) Motomichi Koyama et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Multiscale crystal plasticity modeling of multiphase advanced high strength steel
- (2017) Bassam Mohammed et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Micromechanical finite element analysis of the effects of martensite morphology on the overall mechanical behavior of dual phase steel
- (2017) Najmul H. Abid et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Three-dimensional nanoscale characterisation of materials by atom probe tomography
- (2017) Arun Devaraj et al. INTERNATIONAL MATERIALS REVIEWS
- Identifying Structure–Property Relationships Through DREAM.3D Representative Volume Elements and DAMASK Crystal Plasticity Simulations: An Integrated Computational Materials Engineering Approach
- (2017) Martin Diehl et al. JOM
- Coupled Crystal Plasticity–Phase Field Fracture Simulation Study on Damage Evolution Around a Void: Pore Shape Versus Crystallographic Orientation
- (2017) Martin Diehl et al. JOM
- Elasto-viscoplastic phase field modelling of anisotropic cleavage fracture
- (2017) P. Shanthraj et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Effects of interphase TiC precipitates on tensile properties and dislocation structures in a dual phase steel
- (2017) Shao-Pu Tsai et al. MATERIALS CHARACTERIZATION
- Evidencing extrinsic stacking faults in twinning-induced plasticity steel
- (2017) Gilberto Casillas et al. MATERIALS CHARACTERIZATION
- An RVE procedure for micromechanical prediction of mechanical behavior of dual-phase steel
- (2017) Hyuk Jong Bong et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Micro-damage initiation in ferrite-martensite DP microstructures: A statistical characterization of crystallographic and chemical parameters
- (2017) Fady Archie et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Coincidence of strain-induced TRIP and propagative PLC bands in Medium Mn steels
- (2017) Michael Callahan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Recent progress in microstructural hydrogen mapping in steels: quantification, kinetic analysis, and multi-scale characterisation
- (2017) Motomichi Koyama et al. MATERIALS SCIENCE AND TECHNOLOGY
- Automated Atom-By-Atom Three-Dimensional (3D) Reconstruction of Field Ion Microscopy Data
- (2017) Michal Dagan et al. MICROSCOPY AND MICROANALYSIS
- In-process Precipitation During Laser Additive Manufacturing Investigated by Atom Probe Tomography
- (2017) Philipp Kürnsteiner et al. MICROSCOPY AND MICROANALYSIS
- Characterization of Partitioning in a Medium-Mn Third-Generation AHSS
- (2017) J T Benzing et al. MICROSCOPY AND MICROANALYSIS
- Modern Focused-Ion-Beam-Based Site-Specific Specimen Preparation for Atom Probe Tomography
- (2017) Ty J. Prosa et al. MICROSCOPY AND MICROANALYSIS
- True Atomic-Scale Imaging in Three Dimensions: A Review of the Rebirth of Field-Ion Microscopy
- (2017) Francois Vurpillot et al. MICROSCOPY AND MICROANALYSIS
- Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation
- (2017) Suihe Jiang et al. NATURE
- Deciphering chemical order/disorder and material properties at the single-atom level
- (2017) Yongsoo Yang et al. NATURE
- Crystal plasticity study on stress and strain partitioning in a measured 3D dual phase steel microstructure
- (2017) M. Diehl et al. Physical Mesomechanics
- Current state of Fe-Mn-Al-C low density steels
- (2017) Shangping Chen et al. PROGRESS IN MATERIALS SCIENCE
- Bone-like crack resistance in hierarchical metastable nanolaminate steels
- (2017) Motomichi Koyama et al. SCIENCE
- Direct observation of individual hydrogen atoms at trapping sites in a ferritic steel
- (2017) Y.-S. Chen et al. SCIENCE
- Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel
- (2017) Binhan Sun et al. SCRIPTA MATERIALIA
- A nexus between 3D atomistic data hybrids derived from atom probe microscopy and computational materials science: A new analysis of solute clustering in Al-alloys
- (2017) Baptiste Gault et al. SCRIPTA MATERIALIA
- Optimising multi-frame ADF-STEM for high-precision atomic-resolution strain mapping
- (2017) Lewys Jones et al. ULTRAMICROSCOPY
- Stiff, light, strong and ductile: nano-structured High Modulus Steel
- (2017) H. Springer et al. Scientific Reports
- Crystal plasticity study on stress and strain partitioning in a measured 3D dual phase steel microstructure
- (2017) M. Diehl et al. Physical Mesomechanics
- The Role of κ-Carbides as Hydrogen Traps in High-Mn Steels
- (2017) Tobias Timmerscheidt et al. Metals
- Strengthening Fe – TiB 2 based high modulus steels by precipitations
- (2017) A. Szczepaniak et al. MATERIALS & DESIGN
- Ror2 signaling regulates Golgi structure and transport through IFT20 for tumor invasiveness
- (2017) Michiru Nishita et al. Scientific Reports
- A crystal plasticity model for twinning- and transformation-induced plasticity
- (2016) Su Leen Wong et al. ACTA MATERIALIA
- Spectral TRIP enables ductile 1.1 GPa martensite
- (2016) M.-M. Wang et al. ACTA MATERIALIA
- Multiple mechanisms of lath martensite plasticity
- (2016) L. Morsdorf et al. ACTA MATERIALIA
- Combined atom probe tomography and density functional theory investigation of the Al off-stoichiometry of κ-carbides in an austenitic Fe–Mn–Al–C low density steel
- (2016) M.J. Yao et al. ACTA MATERIALIA
- Effect of Si on the acceleration of bainite transformation by pre-existing martensite
- (2016) Yuki Toji et al. ACTA MATERIALIA
- Strain hardening by dynamic slip band refinement in a high-Mn lightweight steel
- (2016) E. Welsch et al. ACTA MATERIALIA
- Failure of metals I: Brittle and ductile fracture
- (2016) A. Pineau et al. ACTA MATERIALIA
- Additive manufacturing of metals
- (2016) Dirk Herzog et al. ACTA MATERIALIA
- A phase field model for damage in elasto-viscoplastic materials
- (2016) P. Shanthraj et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- A review of the influence of hydrogen on the mechanical properties of DP, TRIP, and TWIP advanced high-strength steels for auto construction
- (2016) Qinglong Liu et al. CORROSION REVIEWS
- A review of hydrogen embrittlement of martensitic advanced high-strength steels
- (2016) Jeffrey Venezuela et al. CORROSION REVIEWS
- Prevention of Hydrogen Embrittlement in Steels
- (2016) Harshad Kumar Dharamshi Hansraj Bhadeshia ISIJ INTERNATIONAL
- Precipitation Reactions in Age-Hardenable Alloys During Laser Additive Manufacturing
- (2016) Eric A. Jägle et al. JOM
- γ→α′ Martensitic transformation and magnetic property of cold rolled Fe–20Mn–4Al–0.3C steel
- (2016) Biao Ma et al. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
- Interstitial and substitutional solute segregation at individual grain boundaries ofα-iron: data revisited
- (2016) Pavel Lejček et al. JOURNAL OF PHYSICS-CONDENSED MATTER
- Numerical implementation of non-local polycrystal plasticity using fast Fourier transforms
- (2016) Ricardo A. Lebensohn et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Interfacial hydrogen localization in austenite/martensite dual-phase steel visualized through optimized silver decoration and scanning Kelvin probe force microscopy
- (2016) T. Nagashima et al. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
- Microstructural characterization of hydrogen induced cracking in TRIP-assisted steel by EBSD
- (2016) A. Laureys et al. MATERIALS CHARACTERIZATION
- Effect of intercritical deformation on microstructure and mechanical properties of a low-silicon aluminum-added hot-rolled directly quenched and partitioned steel
- (2016) Xiao-Dong Tan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microscopic plasticity and damage in two-phase steels: On the competing role of crystallography and phase contrast
- (2016) T.W.J. de Geus et al. MECHANICS OF MATERIALS
- Effect of Austenite Stability on Microstructural Evolution and Tensile Properties in Intercritically Annealed Medium-Mn Lightweight Steels
- (2016) Hyejin Song et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Ab initio-guided design of twinning-induced plasticity steels
- (2016) Dierk Raabe et al. MRS BULLETIN
- Atom probe tomography of metallic nanostructures
- (2016) Kazuhiro Hono et al. MRS BULLETIN
- Hydrogen-assisted damage in austenite/martensite dual-phase steel
- (2016) Motomichi Koyama et al. PHILOSOPHICAL MAGAZINE LETTERS
- Combinatorial Alloy Design by Laser Additive Manufacturing
- (2016) Helene Knoll et al. STEEL RESEARCH INTERNATIONAL
- Microstructure Recognition by Deep Learning
- (2016) Yoshitaka Adachi et al. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN
- Comparison of Maraging Steel Micro- and Nanostructure Produced Conventionally and by Laser Additive Manufacturing
- (2016) Eric Jägle et al. Materials
- Three-dimensional full-field X-ray orientation microscopy
- (2016) Nicola Viganò et al. Scientific Reports
- Combinatorial screening of the microstructure–property relationships for Fe–B–X stiff, light, strong and ductile steels
- (2016) C. Baron et al. MATERIALS & DESIGN
- Combinatorial design of transitory constitution steels: Coupling high strength with inherent formability and weldability through sequenced austenite stability
- (2016) H. Springer et al. MATERIALS & DESIGN
- Effects of Mn additions on microstructure and properties of Fe–TiB 2 based high modulus steels
- (2016) C. Baron et al. MATERIALS & DESIGN
- A general-purpose machine learning framework for predicting properties of inorganic materials
- (2016) Logan Ward et al. npj Computational Materials
- Atom Probe Tomographic Mapping Directly Reveals the Atomic Distribution of Phosphorus in Resin Embedded Ferritin
- (2016) Daniel E. Perea et al. Scientific Reports
- Mechanisms of subgrain coarsening and its effect on the mechanical properties of carbon-supersaturated nanocrystalline hypereutectoid steel
- (2015) Y.J. Li et al. ACTA MATERIALIA
- The effect of grain size on the twin initiation stress in a TWIP steel
- (2015) K.M. Rahman et al. ACTA MATERIALIA
- Role of stress-assisted martensite in the design of strong ultrafine-grained duplex steels
- (2015) Hung-Wei Yen et al. ACTA MATERIALIA
- Suppression of twinning and phase transformation in an ultrafine grained 2 GPa strong metastable austenitic steel: Experiment and simulation
- (2015) Y.F. Shen et al. ACTA MATERIALIA
- Alloying effects on microstructure formation of dual phase steels
- (2015) L. Schemmann et al. ACTA MATERIALIA
- Microstructure refinement for high modulus in-situ metal matrix composite steels via controlled solidification of the system Fe–TiB 2
- (2015) H. Springer et al. ACTA MATERIALIA
- Grain boundary segregation in Fe–Mn–C twinning-induced plasticity steels studied by correlative electron backscatter diffraction and atom probe tomography
- (2015) M. Herbig et al. ACTA MATERIALIA
- Interplay between grain structure, deformation mechanisms and austenite stability in phase-reversion-induced nanograined/ultrafine-grained austenitic ferrous alloy
- (2015) R.D.K. Misra et al. ACTA MATERIALIA
- Austenite stability and deformation behavior in a cold-rolled transformation-induced plasticity steel with medium manganese content
- (2015) Z.H. Cai et al. ACTA MATERIALIA
- 3D structural and atomic-scale analysis of lath martensite: Effect of the transformation sequence
- (2015) L. Morsdorf et al. ACTA MATERIALIA
- Grain boundary segregation engineering and austenite reversion turn embrittlement into toughness: Example of a 9 wt.% medium Mn steel
- (2015) Margarita Kuzmina et al. ACTA MATERIALIA
- Assessment of geometrically necessary dislocation levels derived by 3D EBSD
- (2015) P.J. Konijnenberg et al. ACTA MATERIALIA
- Nanolaminate transformation-induced plasticity–twinning-induced plasticity steel with dynamic strain partitioning and enhanced damage resistance
- (2015) M.-M. Wang et al. ACTA MATERIALIA
- The influence of stacking fault energy on the microstructural and strain-hardening evolution of Fe–Mn–Al–Si steels during tensile deformation
- (2015) D.T. Pierce et al. ACTA MATERIALIA
- An Overview of Dual-Phase Steels: Advances in Microstructure-Oriented Processing and Micromechanically Guided Design
- (2015) C.C. Tasan et al. Annual Review of Materials Research
- Computational modeling of dual-phase steels based on representative three-dimensional microstructures obtained from EBSD data
- (2015) D. Brands et al. ARCHIVE OF APPLIED MECHANICS
- In situ 3D Synchrotron Laminography Assessment of Edge Fracture in Dual-Phase Steels: Quantitative and Numerical Analysis
- (2015) M. Kahziz et al. EXPERIMENTAL MECHANICS
- Computational homogenization of elasticity on a staggered grid
- (2015) Matti Schneider et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Tensile Behavior of Ferrite-martensite Dual Phase Steels with Nano-precipitation of Vanadium Carbides
- (2015) Naoya Kamikawa et al. ISIJ INTERNATIONAL
- Retardation of plastic instability via damage-enabled microstrain delocalization
- (2015) J. P. M. Hoefnagels et al. JOURNAL OF MATERIALS SCIENCE
- Spatially and Kinetically Resolved Mapping of Hydrogen in a Twinning-Induced Plasticity Steel by Use of Scanning Kelvin Probe Force Microscopy
- (2015) Motomichi Koyama et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Atomistically determined phase-field modeling of dislocation dissociation, stacking fault formation, dislocation slip, and reactions in fcc systems
- (2015) Jaber Rezaei Mianroodi et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Micromechanics of plastic deformation and phase transformation in a three-phase TRIP-assisted advanced high strength steel: Experiments and modeling
- (2015) Ankit Srivastava et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- The TriBeam system: Femtosecond laser ablation in situ SEM
- (2015) McLean P. Echlin et al. MATERIALS CHARACTERIZATION
- Overview of the current issues in austenite to ferrite transformation and the role of migrating interfaces therein for low alloyed steels
- (2015) M. Gouné et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- A study on the geometry of dislocation patterns in the surrounding of nanoindents in a TWIP steel using electron channeling contrast imaging and discrete dislocation dynamics simulations
- (2015) J.-l. Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Neighborhood influences on stress and strain partitioning in dual-phase microstructures
- (2015) Martin Diehl et al. MECCANICA
- Multiscale deep drawing analysis of dual-phase steels using grain cluster-based RGC scheme
- (2015) D D Tjahjanto et al. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Linear complexions: Confined chemical and structural states at dislocations
- (2015) M. Kuzmina et al. SCIENCE
- Segregation of boron at prior austenite grain boundaries in a quenched martensitic steel studied by atom probe tomography
- (2015) Y.J. Li et al. SCRIPTA MATERIALIA
- From High-Entropy Alloys to High-Entropy Steels
- (2015) Dierk Raabe et al. STEEL RESEARCH INTERNATIONAL
- Imaging of radiation damage using complementary field ion microscopy and atom probe tomography
- (2015) Michal Dagan et al. ULTRAMICROSCOPY
- Atomic scale investigation of non-equilibrium segregation of boron in a quenched Mo-free martensitic steel
- (2015) Y.J. Li et al. ULTRAMICROSCOPY
- Combining structural and chemical information at the nanometer scale by correlative transmission electron microscopy and atom probe tomography
- (2015) M. Herbig et al. ULTRAMICROSCOPY
- In situ heat treatment in selective laser melted martensitic AISI 420 stainless steels
- (2015) P. Krakhmalev et al. MATERIALS & DESIGN
- Smaller is less stable: Size effects on twinning vs. transformation of reverted austenite in TRIP-maraging steels
- (2014) M-M. Wang et al. ACTA MATERIALIA
- New insights into the austenitization process of low-alloyed hypereutectoid steels: Nucleation analysis of strain-induced austenite formation
- (2014) H. Zhang et al. ACTA MATERIALIA
- Atomic-scale characterization of prior austenite grain boundaries in Fe–Mn-based maraging steel using site-specific atom probe tomography
- (2014) F. Moszner et al. ACTA MATERIALIA
- Combined atom probe tomography and first-principles calculations for studying atomistic interactions between tungsten and tantalum in nickel-based alloys
- (2014) Yaron Amouyal et al. ACTA MATERIALIA
- Theory and application of electron channelling contrast imaging under controlled diffraction conditions
- (2014) Stefan Zaefferer et al. ACTA MATERIALIA
- Hydrogen-assisted decohesion and localized plasticity in dual-phase steel
- (2014) Motomichi Koyama et al. ACTA MATERIALIA
- The influence of manganese content on the stacking fault and austenite/ε-martensite interfacial energies in Fe–Mn–(Al–Si) steels investigated by experiment and theory
- (2014) D.T. Pierce et al. ACTA MATERIALIA
- Hydrogen-induced intergranular failure of iron
- (2014) Shuai Wang et al. ACTA MATERIALIA
- Integrated experimental–simulation analysis of stress and strain partitioning in multiphase alloys
- (2014) C.C. Tasan et al. ACTA MATERIALIA
- A general mixed-mode model for the austenite-to-ferrite transformation kinetics in Fe–C–M alloys
- (2014) Hao Chen et al. ACTA MATERIALIA
- Microscale-calibrated modeling of the deformation response of dual-phase steels
- (2014) Peng Chen et al. ACTA MATERIALIA
- Effects of ceramic particles and composition on elastic modulus of low density steels for automotive applications
- (2014) R. Rana et al. CANADIAN METALLURGICAL QUARTERLY
- Study the effect of martensite banding on the failure initiation in dual-phase steel
- (2014) A. Ramazani et al. COMPUTATIONAL MATERIALS SCIENCE
- Grain boundary segregation engineering in metallic alloys: A pathway to the design of interfaces
- (2014) D. Raabe et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- Fourier-based schemes with modified Green operator for computing the electrical response of heterogeneous media with accurate local fields
- (2014) François Willot et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Atom probe tomography observation of hydrogen in high-Mn steel and silver charged via an electrolytic route
- (2014) D. Haley et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Hydrogen embrittlement associated with strain localization in a precipitation-hardened Fe–Mn–Al–C light weight austenitic steel
- (2014) Motomichi Koyama et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments and crystal plasticity simulations
- (2014) C.C. Tasan et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Ab Initio Based Understanding of the Segregation and Diffusion Mechanisms of Hydrogen in Steels
- (2014) T. Hickel et al. JOM
- Phase Transformations of an Fe-0.85 C-17.9 Mn-7.1 Al Austenitic Steel After Quenching and Annealing
- (2014) Wei-Chun Cheng JOM
- Low-Density Steels: Complex Metallurgy for Automotive Applications
- (2014) I. Zuazo et al. JOM
- Overview of Lightweight Ferrous Materials: Strategies and Promises
- (2014) Radhakanta Rana et al. JOM
- Reverse phase transformation of martensite to austenite in stainless steels: a 3D phase-field study
- (2014) Hemantha Kumar Yeddu et al. JOURNAL OF MATERIALS SCIENCE
- Deformation mechanisms in austenitic TRIP/TWIP steels at room and elevated temperature investigated by acoustic emission and scanning electron microscopy
- (2014) M. Linderov et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Phase-Field Modeling for Intercritical Annealing of a Dual-Phase Steel
- (2014) Benqiang Zhu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- An Atom Probe Study of Kappa Carbide Precipitation and the Effect of Silicon Addition
- (2014) Laura N. Bartlett et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Atomic-Scale Quantification of Grain Boundary Segregation in Nanocrystalline Material
- (2014) M. Herbig et al. PHYSICAL REVIEW LETTERS
- Hydrogen diffusion and the percolation of austenite in nanostructured bainitic steel
- (2014) L. C. D. Fielding et al. PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
- Accurate electron channeling contrast analysis of dislocations in fine grained bulk materials
- (2014) H. Mansour et al. SCRIPTA MATERIALIA
- Atomically resolved tomography to directly inform simulations for structure–property relationships
- (2014) Michael P. Moody et al. Nature Communications
- Reconstruction of local orientation in grains using a discrete representation of orientation space
- (2014) Nicola Viganò et al. JOURNAL OF APPLIED CRYSTALLOGRAPHY
- In situ observation of austenite–ferrite interface migration in a lean Mn steel during cyclic partial phase transformations
- (2013) Hao Chen et al. ACTA MATERIALIA
- Interaction between recrystallization and phase transformation during intercritical annealing in a cold-rolled dual-phase steel: A cellular automaton model
- (2013) Chengwu Zheng et al. ACTA MATERIALIA
- Grain boundary embrittlement by Mn and eutectoid reaction in binary Fe–12Mn steel
- (2013) N.H. Heo et al. ACTA MATERIALIA
- Atomic-scale investigation of ε and θ precipitates in bainite in 100Cr6 bearing steel by atom probe tomography and ab initio calculations
- (2013) W. Song et al. ACTA MATERIALIA
- Hydrogen-assisted failure in a twinning-induced plasticity steel studied under in situ hydrogen charging by electron channeling contrast imaging
- (2013) Motomichi Koyama et al. ACTA MATERIALIA
- Temperature dependence of the flow stress of Fe–18Mn–0.6C–xAl twinning-induced plasticity steel
- (2013) Il-Chan Jung et al. ACTA MATERIALIA
- Three-dimensional atom probe microscopy study of interphase precipitation and nanoclusters in thermomechanically treated titanium–molybdenum steels
- (2013) S. Mukherjee et al. ACTA MATERIALIA
- Atomic-scale analysis of carbon partitioning between martensite and austenite by atom probe tomography and correlative transmission electron microscopy
- (2013) Yuki Toji et al. ACTA MATERIALIA
- Atom probe tomography spatial reconstruction: Status and directions
- (2013) D.J. Larson et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- Effect of Grain Size on Thermal and Mechanical Stability of Austenite in Metastable Austenitic Stainless Steel
- (2013) Yoshikazu Matsuoka et al. ISIJ INTERNATIONAL
- Failure mechanisms in DP600 steel: Initiation, evolution and fracture
- (2013) H. Ghadbeigi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Bulk combinatorial design of ductile martensitic stainless steels through confined martensite-to-austenite reversion
- (2013) H. Springer et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Lambda transitions in materials science: Recent advances in CALPHAD and first-principles modelling
- (2013) Fritz Körmann et al. PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS
- Correlative atom-probe tomography and transmission electron microscope study of a chemical transition in a spinel on an oxidized nickel-based superalloy
- (2013) Sung-Il Baik et al. SCRIPTA MATERIALIA
- Microbanding mechanism in an Fe–Mn–C high-Mn twinning-induced plasticity steel
- (2013) I. Gutierrez-Urrutia et al. SCRIPTA MATERIALIA
- Effects of α/γ orientation relationship on VC interphase precipitation in low-carbon steels
- (2013) Y.-J. Zhang et al. SCRIPTA MATERIALIA
- The transition from interphase-precipitated carbides to fibrous carbides in a vanadium-containing medium-carbon steel
- (2013) Meng-Yang Chen et al. SCRIPTA MATERIALIA
- Reconstructing atom probe data: A review
- (2013) Francois Vurpillot et al. ULTRAMICROSCOPY
- Atom Probe Tomography of Apatites and Bone-Type Mineralized Tissues
- (2012) Lyle M. Gordon et al. ACS Nano
- Atomic scale effects of alloying, partitioning, solute drag and austempering on the mechanical properties of high-carbon bainitic–austenitic TRIP steels
- (2012) Jae-Bok Seol et al. ACTA MATERIALIA
- Nanoscale austenite reversion through partitioning, segregation and kinetic freezing: Example of a ductile 2GPa Fe–Cr–C steel
- (2012) L. Yuan et al. ACTA MATERIALIA
- Elastic properties of face-centred cubic Fe–Mn–C studied by nanoindentation and ab initio calculations
- (2012) S. Reeh et al. ACTA MATERIALIA
- Prediction of post-dynamic austenite-to-ferrite transformation and reverse transformation in a low-carbon steel by cellular automaton modeling
- (2012) Chengwu Zheng et al. ACTA MATERIALIA
- Analysis of ferrite growth retardation induced by local Mn enrichment in austenite created by prior interface passages
- (2012) Hao Chen et al. ACTA MATERIALIA
- Revealing the strain-hardening behavior of twinning-induced plasticity steels: Theory, simulations, experiments
- (2012) David R. Steinmetz et al. ACTA MATERIALIA
- Atom Probe Tomography 2012
- (2012) Thomas F. Kelly et al. Annual Review of Materials Research
- Advanced high strength steels for automotive industry
- (2012) R. KUZIAK et al. Archives of Civil and Mechanical Engineering
- Combined ab initio, experimental, and CALPHAD approach for an improved thermodynamic evaluation of the Mg–Si system
- (2012) Michael Schick et al. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
- Failure analysis of DP600 steel during the cross-die test
- (2012) A. Ramazani et al. COMPUTATIONAL MATERIALS SCIENCE
- A spectral method solution to crystal elasto-viscoplasticity at finite strains
- (2012) P. Eisenlohr et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Simulation of Austenite-to-ferrite Transformation in Deformed Austenite by Crystal Plasticity Finite Element Method and Multi-phase-field Method
- (2012) Akinori Yamanaka et al. ISIJ INTERNATIONAL
- Magnetic detection of small fractions of ferromagnetic martensite within the paramagnetic austenite matrix of TWIP steel
- (2012) Lie Zhao et al. JOURNAL OF MATERIALS SCIENCE
- Hydrogen Effects on Ultrafine-Grained Steels Processed by High-Pressure Torsion
- (2012) Yoji Mine et al. MATERIALS TRANSACTIONS
- An Atom-Probe Tomographic Study of Arc Welds in a Multi-Component High-Strength Low-Alloy Steel
- (2012) Allen H. Hunter et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Hydrogen Embrittlement of Automotive Advanced High-Strength Steels
- (2012) Gianfranco Lovicu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Quantification of dislocation structure heterogeneity in deformed polycrystals by EBSD
- (2012) D P Field et al. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Grain size effect on strain hardening in twinning-induced plasticity steels
- (2012) I. Gutierrez-Urrutia et al. SCRIPTA MATERIALIA
- Solubility of carbon in tetragonal ferrite in equilibrium with austenite
- (2012) Jae Hoon Jang et al. SCRIPTA MATERIALIA
- Direct evidence for the formation of ordered carbides in a ferrite-based low-density Fe–Mn–Al–C alloy studied by transmission electron microscopy and atom probe tomography
- (2012) Jae-Bok Seol et al. SCRIPTA MATERIALIA
- Combinatorial thin film materials science: From alloy discovery and optimization to alloy design
- (2012) Thomas Gebhardt et al. THIN SOLID FILMS
- High resolution electron backscatter diffraction measurements of elastic strain variations in the presence of larger lattice rotations
- (2012) T.B. Britton et al. ULTRAMICROSCOPY
- Superplastic martensitic Mn–Si–Cr–C steel with 900% elongation
- (2011) H. Zhang et al. ACTA MATERIALIA
- Atomic-scale mechanisms of deformation-induced cementite decomposition in pearlite
- (2011) Y.J. Li et al. ACTA MATERIALIA
- Interphase precipitation of nanometer-sized carbides in a titanium–molybdenum-bearing low-carbon steel
- (2011) Hung-Wei Yen et al. ACTA MATERIALIA
- A phase field study of strain energy effects on solute–grain boundary interactions
- (2011) Tae Wook Heo et al. ACTA MATERIALIA
- On the origin of dynamic strain aging in twinning-induced plasticity steels
- (2011) Seok-Jae Lee et al. ACTA MATERIALIA
- Experimental and numerical study on geometrically necessary dislocations and non-homogeneous mechanical properties of the ferrite phase in dual phase steels
- (2011) J. Kadkhodapour et al. ACTA MATERIALIA
- Strength and ductility of 316L austenitic stainless steel strengthened by nano-scale twin bundles
- (2011) F.K. Yan et al. ACTA MATERIALIA
- High-energy X-ray diffraction study on the temperature-dependent mechanical stability of retained austenite in low-alloyed TRIP steels
- (2011) R. Blondé et al. ACTA MATERIALIA
- Five-Parameter Grain Boundary Analysis by 3D EBSD of an Ultra Fine Grained CuZr Alloy Processed by Equal Channel Angular Pressing
- (2011) A. Khorashadizadeh et al. ADVANCED ENGINEERING MATERIALS
- Parametric study of multiphase TRIP steels undergoing cyclic loading
- (2011) D.D. Tjahjanto et al. COMPUTATIONAL MATERIALS SCIENCE
- Analysis of the plastic anisotropy and pre-yielding of (γ/α2)-phase titanium aluminide microstructures by crystal plasticity simulation
- (2011) C. Zambaldi et al. INTERMETALLICS
- Hydrogen interaction with multiple traps: Can it be used to mitigate embrittlement?
- (2011) M. Dadfarnia et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- The shear fracture of dual-phase steel
- (2011) Ji Hoon Kim et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Temperature dependant polycrystal model application to bainitic steel behavior under tri-axial loading in the ductile–brittle transition
- (2011) Maximilien Libert et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Orientation informed nanoindentation of α-titanium: Indentation pileup in hexagonal metals deforming by prismatic slip
- (2011) Claudio Zambaldi et al. JOURNAL OF MATERIALS RESEARCH
- Atom probe tomography investigation of assisted precipitation of secondary hardening carbides in a medium carbon martensitic steels
- (2011) F. DANOIX et al. JOURNAL OF MICROSCOPY
- A phase-field model for incoherent martensitic transformations including plastic accommodation processes in the austenite
- (2011) J. Kundin et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- A reproducible method for damage-free site-specific preparation of atom probe tips from interfaces
- (2011) Peter Johann Felfer et al. MICROSCOPY RESEARCH AND TECHNIQUE
- Metallic composites processed via extreme deformation: Toward the limits of strength in bulk materials
- (2011) Dierk Raabe et al. MRS BULLETIN
- Direct Observation of Local Potassium Variation and Its Correlation to Electronic Inhomogeneity in(Ba1−xKx)Fe2As2Pnictide
- (2011) W. K. Yeoh et al. PHYSICAL REVIEW LETTERS
- Hydrogen-induced cracking at grain and twin boundaries in an Fe–Mn–C austenitic steel
- (2011) Motomichi Koyama et al. SCRIPTA MATERIALIA
- Assessment of local deformation using EBSD: Quantification of accuracy of measurement and definition of local gradient
- (2011) Masayuki Kamaya ULTRAMICROSCOPY
- Measurement of residual elastic strain and lattice rotations with high resolution electron backscatter diffraction
- (2011) T.B. Britton et al. ULTRAMICROSCOPY
- Plastic anisotropy of γ-TiAl revealed by axisymmetric indentation
- (2010) C. Zambaldi et al. ACTA MATERIALIA
- Interphase precipitation in niobium-microalloyed steels
- (2010) R. Okamoto et al. ACTA MATERIALIA
- Chemical gradients across phase boundaries between martensite and austenite in steel studied by atom probe tomography and simulation
- (2010) O. Dmitrieva et al. ACTA MATERIALIA
- Nanoscale co-precipitation and mechanical properties of a high-strength low-carbon steel
- (2010) Michael D. Mulholland et al. ACTA MATERIALIA
- Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging
- (2010) Marion Calcagnotto et al. ACTA MATERIALIA
- A micro mechanical study on failure initiation of dual phase steels under tension using single crystal plasticity model
- (2010) J. Kadkhodapour et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A review on hot stamping
- (2010) H. Karbasian et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Applications of atom-probe tomography to the characterisation of solute behaviours
- (2010) Emmanuelle A. Marquis et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Microstructure and texture evolution in dual-phase steels: Competition between recovery, recrystallization, and phase transformation
- (2010) N. Peranio et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of grain refinement to 1μm on strength and toughness of dual-phase steels
- (2010) Marion Calcagnotto et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD
- (2010) Marion Calcagnotto et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The effect of grain size and grain orientation on deformation twinning in a Fe–22wt.% Mn–0.6wt.% C TWIP steel
- (2010) I. Gutierrez-Urrutia et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Critical grain size for dislocation storage and consequences for strain hardening of nanocrystalline materials
- (2010) O. Bouaziz et al. SCRIPTA MATERIALIA
- Damage observation in a high-manganese austenitic TWIP steel by synchrotron radiation computed tomography
- (2010) J. Lorthios et al. SCRIPTA MATERIALIA
- The first direct observation of hydrogen trapping sites in TiC precipitation-hardening steel through atom probe tomography
- (2010) Jun Takahashi et al. SCRIPTA MATERIALIA
- Broadening the applications of the atom probe technique by ultraviolet femtosecond laser
- (2010) K. Hono et al. ULTRAMICROSCOPY
- Grain-boundary engineering markedly reduces susceptibility to intergranular hydrogen embrittlement in metallic materials
- (2009) S. Bechtle et al. ACTA MATERIALIA
- An in situ high-energy X-ray diffraction study of micromechanical behavior of multiple phases in advanced high-strength steels
- (2009) N. Jia et al. ACTA MATERIALIA
- Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
- (2009) F. Roters et al. ACTA MATERIALIA
- A thermodynamics framework and numerical aspects for transformation-induced plasticity at large strains
- (2009) Rolf Mahnken et al. ARCHIVE OF APPLIED MECHANICS
- A combined optimization of alloy composition and aging temperature in designing new UHS precipitation hardenable stainless steels
- (2009) W. Xu et al. COMPUTATIONAL MATERIALS SCIENCE
- Virtual material testing for stamping simulations based on polycrystal plasticity
- (2009) M. Kraska et al. COMPUTATIONAL MATERIALS SCIENCE
- A boundary smoothing algorithm for image-based modeling and its application to micromechanical analysis of multi-phase materials
- (2009) Ji Hoon Kim et al. COMPUTATIONAL MATERIALS SCIENCE
- Characterisation of formability behaviour of multiphase steels by micromechanical modelling
- (2009) Vitoon Uthaisangsuk et al. INTERNATIONAL JOURNAL OF FRACTURE
- First-Principles Calculations and CALPHAD Modeling of Thermodynamics
- (2009) Zi-Kui Liu JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION
- Effects of recrystallization annealing temperature on carbide precipitation, microstructure, and mechanical properties in Fe–18Mn–0.6C–1.5Al TWIP steel
- (2009) Singon Kang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Isothermal embrittlement of Fe–8Mn alloys at 450°C
- (2009) F. Nikbakht et al. MATERIALS SCIENCE AND TECHNOLOGY
- Observation of Precipitation Evolution in Fe-Ni-Mn-Ti-Al Maraging Steel by Atom Probe Tomography
- (2009) E.V. Pereloma et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Derivation and Variation in Composition-Dependent Stacking Fault Energy Maps Based on Subregular Solution Model in High-Manganese Steels
- (2009) A. Saeed-Akbari et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A novel grain cluster-based homogenization scheme
- (2009) D D Tjahjanto et al. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Nanostructured bainite
- (2009) H. K. D. H. Bhadeshia PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
- Multiple dispersed phases in a high-strength low-carbon steel: An atom-probe tomographic and synchrotron X-ray diffraction study
- (2009) Michael D. Mulholland et al. SCRIPTA MATERIALIA
- Electron channeling contrast imaging of twins and dislocations in twinning-induced plasticity steels under controlled diffraction conditions in a scanning electron microscope
- (2009) I. Gutierrez-Urrutia et al. SCRIPTA MATERIALIA
- Deformation mechanisms of twinning-induced plasticity steels: In situ synchrotron characterization and modeling
- (2009) Kun Yan et al. SCRIPTA MATERIALIA
- Revisiting hydrogen embrittlement models and hydrogen-induced homogeneous nucleation of dislocations
- (2009) Reiner Kirchheim SCRIPTA MATERIALIA
- Relaxed grain cluster (RGC) homogenization scheme
- (2009) D. D. Tjahjanto et al. International Journal of Material Forming
- Formability of advanced high strength steels
- (2009) Robert H. Wagoner et al. International Journal of Material Forming
- The influence of plastic instabilities on the mechanical properties of a high-manganese austenitic FeMnC steel
- (2008) Sébastien Allain et al. International Journal of Materials Research
- Investigation of three-dimensional aspects of grain-scale plastic surface deformation of an aluminum oligocrystal
- (2008) Z. Zhao et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Ultrafine Grained Ferrite/Martensite Dual Phase Steel Fabricated by Large Strain Warm Deformation and Subsequent Intercritical Annealing
- (2008) Marion Calcagnotto et al. ISIJ INTERNATIONAL
- On Predicting Nucleation of Microcracks Due to Slip-Twin Interactions at Grain Boundaries in Duplex Near γ-TiAl
- (2008) D. Kumar et al. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
- Three-dimensional EBSD study on the relationship between triple junctions and columnar grains in electrodeposited Co–Ni films
- (2008) A. BASTOS et al. JOURNAL OF MICROSCOPY
- Viscoplasticity of heterogeneous metallic materials
- (2008) David L. McDowell MATERIALS SCIENCE & ENGINEERING R-REPORTS
- FE modelling of bainitic steels using crystal plasticity
- (2008) N. Osipov et al. PHILOSOPHICAL MAGAZINE
- A phenomenological dislocation theory for martensitic transformation in ductile materials: From micro- to macroscopic description
- (2008) M. Cherkaoui et al. PHILOSOPHICAL MAGAZINE
- Tensile properties and twinning behavior of high manganese austenitic steel with fine-grained structure
- (2008) R. Ueji et al. SCRIPTA MATERIALIA
- The morphology of secondary-hardening carbides in a martensitic steel at the peak hardness by 3DFIM
- (2008) J. Akré et al. ULTRAMICROSCOPY
- Three-dimensional atom probe analysis of heavily drawn steel wires by probing perpendicular to the pearlitic lamellae
- (2008) Jun Takahashi et al. ULTRAMICROSCOPY
- On the origin of deformation-induced rotation patterns below nanoindents
- (2007) N. Zaafarani et al. ACTA MATERIALIA
- Selecting a set of discrete orientations for accurate texture reconstruction
- (2007) Philip Eisenlohr et al. COMPUTATIONAL MATERIALS SCIENCE
- Experimental and numerical failure criterion for formability prediction in sheet metal forming
- (2007) V. Uthaisangsuk et al. COMPUTATIONAL MATERIALS SCIENCE
- A microstructure-based analysis for transformation induced plasticity and mechanically induced martensitic transformation
- (2007) Heung Nam Han et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Recrystallization in AISI 304 austenitic stainless steel during and after hot deformation
- (2007) A. Dehghan-Manshadi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels
- (2007) O. Bouaziz et al. SCRIPTA MATERIALIA
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started