标题
Additively manufactured meta-biomaterials: A state-of-the-art review
作者
关键词
-
出版物
COMPOSITE STRUCTURES
Volume 305, Issue -, Pages 116491
出版商
Elsevier BV
发表日期
2022-11-18
DOI
10.1016/j.compstruct.2022.116491
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Static and dynamic properties of a perforated metallic auxetic metamaterial with tunable stiffness and energy absorption
- (2022) Yi Zhang et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Finite element analyses of porous dental implant designs based on 3D printing concept to evaluate biomechanical behaviors of healthy and osteoporotic bones
- (2022) Abdelhak Ouldyerou et al. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
- Design and Properties of Biomimetic irregular scaffolds for bone tissue engineering
- (2021) Hao Chen et al. COMPUTERS IN BIOLOGY AND MEDICINE
- A hybrid additive manufacturing platform to create bulk and surface composition gradients on scaffolds for tissue regeneration
- (2021) Ravi Sinha et al. Nature Communications
- Additive Manufacturing Processes in Medical Applications
- (2021) Mika Salmi Materials
- Additively manufactured space-filling meta-implants
- (2021) H.M.A. Kolken et al. Acta Biomaterialia
- Fatigue performance of auxetic meta-biomaterials
- (2021) H.M.A. Kolken et al. Acta Biomaterialia
- Additively Manufactured Gradient Porous Ti–6Al–4V Hip Replacement Implants Embedded with Cell-Laden Gelatin Methacryloyl Hydrogels
- (2021) Elham Davoodi et al. ACS Applied Materials & Interfaces
- Modeling and analysis of material anisotropy-topology effects of 3D cellular structures fabricated by powder bed fusion additive manufacturing
- (2021) Yan Wu et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Isotropic octet-truss lattice structure design and anisotropy control strategies for implant application
- (2021) Jiawei Feng et al. MATERIALS & DESIGN
- 3D printing with particles as feedstock materials
- (2021) Jun Zhang et al. ADVANCED POWDER TECHNOLOGY
- Additively-manufactured PEEK/HA porous scaffolds with highly-controllable mechanical properties and excellent biocompatibility
- (2021) Jibao Zheng et al. Materials Science & Engineering C-Materials for Biological Applications
- The effects of Fe content on the microstructural evolution and tensile properties in Ti–6Al–4V-(2, 4)Fe alloys fabricated by thermomechanical powder consolidation
- (2021) Lei Meng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Directed energy deposition (DED) additive manufacturing: Physical characteristics, defects, challenges and applications
- (2021) David Svetlizky et al. Materials Today
- Supportless printing of lattice structures by metal fused filament fabrication (MF3) of Ti-6Al-4V: design and analysis
- (2021) Mohammad Qasim Shaikh et al. RAPID PROTOTYPING JOURNAL
- Prediction of Ti-Zr-Nb-Ta high-entropy alloys with desirable hardness by combining machine learning and experimental data
- (2021) Yan Sun et al. APPLIED PHYSICS LETTERS
- Investigation on the thermal expansion behavior of FeCoNi and Fe30Co30Ni30Cr10-xMnx high entropy alloys
- (2021) Chun-Lin Lin et al. MATERIALS CHEMISTRY AND PHYSICS
- Negative Poisson’s ratio lattice for designing vertebral biomaterials
- (2021) Andrea Sorrentino et al. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
- Isotropic porous structure design methods based on triply periodic minimal surfaces
- (2021) Jiawei Feng et al. MATERIALS & DESIGN
- Anisotropic thermal expansion of bio-based rigid low-density closed-cell polyurethane foams
- (2021) J. Andersons et al. Journal of Materials Research and Technology-JMR&T
- Additively manufactured biodegradable porous magnesium implants for elimination of implant-related infections: An in vitro and in vivo study
- (2021) Kai Xie et al. Bioactive Materials
- Biomechanical investigation of a novel hybrid dorsal double plating for distal radius fractures by integrating topology optimization and finite element analysis
- (2020) Medical Doctor Hsuan Chih Liu et al. INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED
- The use of selective laser melting in the fabrication of maxillary and mandibular metal base complete dentures for a patient with Ehlers-Danlos syndrome: A clinical report
- (2020) Francisco X. Azpiazu-Flores et al. JOURNAL OF PROSTHETIC DENTISTRY
- Experimental and numerical investigation of selective laser melting–induced defects in Ti–6Al–4V octet truss lattice material: the role of material microstructure and morphological variations
- (2020) Asma El Elmi et al. JOURNAL OF MATERIALS RESEARCH
- Chemical composition, surface roughness, and ceramic bond strength of additively manufactured cobalt-chromium dental alloys
- (2020) Marta Revilla-León et al. JOURNAL OF PROSTHETIC DENTISTRY
- Mechanical performance of auxetic meta-biomaterials
- (2020) H.M.A. Kolken et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mesoscopic-Scale Numerical Simulation Including the Influence of Process Parameters on SLM Single-Layer Multi-pass Formation
- (2020) Liu Cao METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Topology optimization of structures under design-dependent pressure loads by a boundary identification-load evolution (BILE) model
- (2020) Osezua Ibhadode et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Topology optimization parallel-computing framework based on the inherent strain method for support structure design in laser powder-bed fusion additive manufacturing
- (2020) Zhi-Dong Zhang et al. International Journal of Mechanics and Materials in Design
- CoCr alloy processed by Selective Laser Melting (SLM): effect of Laser Energy Density on microstructure, surface morphology, and hardness
- (2020) Lavinia Tonelli et al. Journal of Manufacturing Processes
- A Review of the SLM Lattice Structures and Their Numerical Models
- (2020) Zaki Alomar et al. ADVANCED ENGINEERING MATERIALS
- Metal Binder Jetting Additive Manufacturing: A Literature Review
- (2020) Ming Li et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Topological optimization of 3D printed bone analog with PEKK for surgical mandibular reconstruction
- (2020) Kang-jie Cheng et al. Journal of the Mechanical Behavior of Biomedical Materials
- Development of a novel Mg–Y–Zn–Al–Li alloy with high elastic modulus and damping capacity
- (2020) Di Zhao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Metallic additive manufacturing for bone-interfacing implants
- (2020) Avik Sarker et al. Biointerphases
- Thermal expansion of martensite in Ti29.7Ni50.3Hf20 shape memory alloy
- (2020) A. Shuitcev et al. INTERMETALLICS
- Additively Manufactured Tantalum Implants for Repairing Bone Defects: A Systematic Review
- (2020) Hu Qian et al. TISSUE ENGINEERING PART B-REVIEWS
- Design and Optimization of Lattice Structures: A Review
- (2020) Chen Pan et al. Applied Sciences-Basel
- Manufacturability, Mechanical Properties, Mass-Transport Properties and Biocompatibility of Triply Periodic Minimal Surface (TPMS) Porous Scaffolds Fabricated by Selective Laser Melting
- (2020) Shuai Ma et al. MATERIALS & DESIGN
- Fatigue behavior and osseointegration of porous Ti-6Al-4V scaffolds with dense core for dental application
- (2020) Yinze Xiong et al. MATERIALS & DESIGN
- High-Performance Dual-Mode Triboelectric Nanogenerator Based on Hierarchical Auxetic Structure
- (2020) Seolhee Han et al. ACS Energy Letters
- Smart materials in cardiovascular implants: Shape memory alloys and shape memory polymers
- (2020) Heather Holman et al. ARTIFICIAL ORGANS
- Osteogenic and antibacterial surfaces on additively manufactured porous Ti-6Al-4V implants: Combining silver nanoparticles with hydrothermally synthesized HA nanocrystals
- (2020) Mohammad Fazel et al. Materials Science & Engineering C-Materials for Biological Applications
- Femur Auxetic Meta-Implants with Tuned Micromotion Distribution
- (2020) Naeim Ghavidelnia et al. Materials
- Mechanically driving supersaturated Fe–Mg solid solution for bone implant: Preparation, solubility and degradation
- (2020) Cijun Shuai et al. COMPOSITES PART B-ENGINEERING
- Trabecular-like Ti-6Al-4V scaffolds for orthopedic: fabrication by selective laser melting and in vitro biocompatibility
- (2019) Huixin Liang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Fluid Permeability of Graded Porosity Scaffolds Architectured with Minimal Surfaces
- (2019) Masoud Zhianmanesh et al. ACS Biomaterials-Science & Engineering
- Semianalytical Geometry-Property Relationships for Some Generalized Classes of Pentamodelike Additively Manufactured Mechanical Metamaterials
- (2019) R. Hedayati et al. Physical Review Applied
- Non-Auxetic Mechanical Metamaterials
- (2019) Christa de Jonge et al. Materials
- Formation of osseointegrating (bone integrating) surfaces on titanium by laser irradiation
- (2019) Rickard Olsson et al. JOURNAL OF LASER APPLICATIONS
- Surface Modification of Biomedical Titanium Alloy: Micromorphology, Microstructure Evolution and Biomedical Applications
- (2019) Wei Liu et al. Coatings
- Early osteointegration evaluation of porous Ti6Al4V scaffolds designed based on triply periodic minimal surface models
- (2019) Lan Li et al. Journal of Orthopaedic Translation
- Topology optimised metallic bone plates produced by electron beam melting: a mechanical and biological study
- (2019) Abdulsalam Abdulaziz Al-Tamimi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- On the effect of geometrical imperfections and defects on the fatigue strength of cellular lattice structures additively manufactured via Selective Laser Melting
- (2019) M. Dallago et al. INTERNATIONAL JOURNAL OF FATIGUE
- A general multi-objective topology optimization methodology developed for customized design of pelvic prostheses
- (2019) Taimoor Iqbal et al. MEDICAL ENGINEERING & PHYSICS
- Vertebral Reconstruction with Customized 3-Dimensional−Printed Spine Implant Replacing Large Vertebral Defect with 3-Year Follow-up
- (2019) Kyu Seon Chung et al. World Neurosurgery
- The design and in vivo testing of a locally stiffness-matched porous scaffold
- (2019) Shaaz Ghouse et al. Applied Materials Today
- Hyperbolic origami-inspired folding of triply periodic minimal surface structures
- (2019) Sebastien J.P. Callens et al. Applied Materials Today
- Mitigation of scan strategy effects and material anisotropy through supersolvus annealing in LPBF IN718
- (2019) David J. Newell et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Controlling mechanical properties of additively manufactured hastelloy X by altering solidification pattern during laser powder-bed fusion
- (2019) Ali Keshavarzkermani et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of microstructure and internal defects on mechanical anisotropy and asymmetry of selective laser-melted 316L austenitic stainless steel
- (2019) Jin Myoung Jeon et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fused deposition modelling: a review
- (2019) Swapnil Vyavahare et al. RAPID PROTOTYPING JOURNAL
- Application of Directed Energy Deposition-Based Additive Manufacturing in Repair
- (2019) Abdollah Saboori et al. Applied Sciences-Basel
- Functionally graded and multi-morphology sheet TPMS lattices: Design, manufacturing, and mechanical properties
- (2019) Oraib Al-Ketan et al. Journal of the Mechanical Behavior of Biomedical Materials
- Effect of hot isostatic pressing (HIP) treatment on the compressive properties of Ti6Al4V lattice structure fabricated by selective laser melting
- (2019) Xingchen Yan et al. MATERIALS LETTERS
- Comparison of 3D-printed porous tantalum and titanium scaffolds on osteointegration and osteogenesis
- (2019) Han Wang et al. Materials Science & Engineering C-Materials for Biological Applications
- Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights
- (2019) Anton du Plessis et al. MATERIALS & DESIGN
- Additively manufactured iron-manganese for biodegradable porous load-bearing bone scaffold applications
- (2019) Danilo Carluccio et al. Acta Biomaterialia
- Accelerating Auxetic Metamaterial Design with Deep Learning
- (2019) Jackson K. Wilt et al. ADVANCED ENGINEERING MATERIALS
- Review of defects in lattice structures manufactured by powder bed fusion
- (2019) Ifeanyichukwu Echeta et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Highly stretchable two-dimensional auxetic metamaterial sheets fabricated via direct-laser cutting
- (2019) Luke Mizzi et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Design and statistical analysis of irregular porous scaffolds for orthopedic reconstruction based on voronoi tessellation and fabricated via selective laser melting (SLM)
- (2019) Yue Du et al. MATERIALS CHEMISTRY AND PHYSICS
- Analysis of Density, Roughness, and Accuracy of the Atomic Diffusion Additive Manufacturing (ADAM) Process for Metal Parts
- (2019) Manuela Galati et al. Materials
- SLM lattice structures: Properties, performance, applications and challenges
- (2019) Tobias Maconachie et al. MATERIALS & DESIGN
- Effect of geometry on the mechanical properties of Ti-6Al-4V Gyroid structures fabricated via SLM: A numerical study
- (2019) Eric Yang et al. MATERIALS & DESIGN
- Additively manufactured biodegradable porous iron
- (2018) Y. Li et al. Acta Biomaterialia
- Additively manufactured biodegradable porous magnesium
- (2018) Y. Li et al. Acta Biomaterialia
- Fatigue performance of additively manufactured meta-biomaterials: The effects of topology and material type
- (2018) S.M. Ahmadi et al. Acta Biomaterialia
- Mechanical characterisation of auxetic cellular structures built from inverted tetrapods
- (2018) Nejc Novak et al. COMPOSITE STRUCTURES
- Selective electron beam manufactured Ti-6Al-4V lattice structures for orthopedic implant applications: Current status and outstanding challenges
- (2018) X.Z. Zhang et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- Infill Optimization for Additive Manufacturing—Approaching Bone-Like Porous Structures
- (2018) Jun Wu et al. IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS
- Study of Selective Laser Melting of intermetallic TiAl powder using integral analysis
- (2018) Maria Doubenskaia et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Recent developments and opportunities in additive manufacturing of titanium-based matrix composites: A review
- (2018) Hooyar Attar et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- The Design Process of Additively Manufactured Mesoscale Lattice Structures: A Review
- (2018) Francesco Tamburrino et al. JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING
- DESIGN OF A MAXILLOFACIAL PROSTHESIS BASED ON TOPOLOGY OPTIMIZATION
- (2018) NING DAI et al. Journal of Mechanics in Medicine and Biology
- Continuous functionally graded porous titanium scaffolds manufactured by selective laser melting for bone implants
- (2018) Changjun Han et al. Journal of the Mechanical Behavior of Biomedical Materials
- Fatigue and biological properties of Ti-6Al-4V ELI cellular structures with variously arranged cubic cells made by selective laser melting
- (2018) M. Dallago et al. Journal of the Mechanical Behavior of Biomedical Materials
- Isolated and modulated effects of topology and material type on the mechanical properties of additively manufactured porous biomaterials
- (2018) R. Hedayati et al. Journal of the Mechanical Behavior of Biomedical Materials
- Compressive characteristics of radially graded porosity scaffolds architectured with minimal surfaces
- (2018) M. Afshar et al. Materials Science & Engineering C-Materials for Biological Applications
- Effect of heat-treatment temperature on microstructures and mechanical properties of Co–Cr–Mo alloys fabricated by selective laser melting
- (2018) Yuka Kajima et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Finite element analysis and design of an interspinous device using topology optimization
- (2018) Li-Xin Guo et al. MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING
- Direct submicron patterning of titanium for bone implants
- (2018) C.P.W. Hammann et al. MICROELECTRONIC ENGINEERING
- A review of powder additive manufacturing processes for metallic biomaterials
- (2018) W.S.W. Harun et al. POWDER TECHNOLOGY
- Rapid manufacturing of biodegradable pure iron scaffold using amalgamation of three-dimensional printing and pressureless microwave sintering
- (2018) Pawan Sharma et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Mechanical metamaterials associated with stiffness, rigidity and compressibility: A brief review
- (2018) Xianglong Yu et al. PROGRESS IN MATERIALS SCIENCE
- Selective laser melting of lattice structures: A statistical approach to manufacturability and mechanical behavior
- (2018) Swee Leong Sing et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Auxetic metamaterials and structures: a review
- (2018) Xin Ren et al. Smart Materials and Structures
- Towards deployable meta-implants
- (2018) F. S. L. Bobbert et al. Journal of Materials Chemistry B
- Rationally designed meta-implants: a combination of auxetic and conventional meta-biomaterials
- (2018) Helena M. A. Kolken et al. Materials Horizons
- Design and Compressive Behavior of Controllable Irregular Porous Scaffolds: Based on Voronoi-Tessellation and for Additive Manufacturing
- (2018) Guanjun Wang et al. ACS Biomaterials-Science & Engineering
- Mechanical properties and energy absorption capability of functionally graded F2BCC lattice fabricated by SLM
- (2018) Dheyaa S.J. Al-Saedi et al. MATERIALS & DESIGN
- Additive manufacturing of compositionally gradient metal-ceramic structures: Stainless steel to vanadium carbide
- (2018) Thomas Gualtieri et al. MATERIALS & DESIGN
- A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties
- (2018) Haniyeh Fayazfar et al. MATERIALS & DESIGN
- Design and Compressive Behavior of Controllable Irregular Porous Scaffolds: Based on Voronoi-Tessellation and for Additive Manufacturing
- (2018) Guanjun Wang et al. ACS Biomaterials Science & Engineering
- Antibacterial and immunogenic behavior of silver coating on additively manufactured porous titanium
- (2018) M. Croes et al. Acta Biomaterialia
- Ultrahigh-strength titanium gyroid scaffolds manufactured by selective laser melting (SLM) for bone implant applications
- (2018) Arash Ataee et al. ACTA MATERIALIA
- Biomimetic 3D-printed custom-made prosthesis for anterior column reconstruction in the thoracolumbar spine: a tailored option following en bloc resection for spinal tumors
- (2018) Marco Girolami et al. EUROPEAN SPINE JOURNAL
- Laser additive manufacturing of Zn porous scaffolds: shielding gas flow, surface quality and densification
- (2018) Peng Wen et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Fatigue life of additively manufactured Ti6Al4V scaffolds under tension-tension, tension-compression and compression-compression fatigue load
- (2018) Karel Lietaert et al. Scientific Reports
- Effect of porosity variation strategy on the performance of functionally graded Ti-6Al-4V scaffolds for bone tissue engineering
- (2018) Xiang-Yu Zhang et al. MATERIALS & DESIGN
- From microstructural design to surface engineering: A tailored approach for improving fatigue life of additively manufactured meta-biomaterials
- (2018) S.M. Ahmadi et al. Acta Biomaterialia
- Topological design, permeability and mechanical behavior of additively manufactured functionally graded porous metallic biomaterials
- (2018) Xiang-Yu Zhang et al. Acta Biomaterialia
- Multi-material 3D printed mechanical metamaterials: Rational design of elastic properties through spatial distribution of hard and soft phases
- (2018) M. J. Mirzaali et al. APPLIED PHYSICS LETTERS
- Recent advancements in Fe-based biodegradable materials for bone repair
- (2018) R. Gorejová et al. JOURNAL OF MATERIALS SCIENCE
- Topology optimization of bone using cubic material design and evolutionary methods based on internal remodeling
- (2018) Ibrahim Goda et al. MECHANICS RESEARCH COMMUNICATIONS
- On the effect of spatter particles distribution on the quality of Hastelloy X parts made by laser powder-bed fusion additive manufacturing
- (2018) Reza Esmaeilizadeh et al. Journal of Manufacturing Processes
- Functionally graded porous scaffolds in multiple patterns: New design method, physical and mechanical properties
- (2018) Fei Liu et al. MATERIALS & DESIGN
- Mechanical performance of additively manufactured meta-biomaterials
- (2018) Amir A. Zadpoor Acta Biomaterialia
- Design for Additive Bio-Manufacturing: From Patient-Specific Medical Devices to Rationally Designed Meta-Biomaterials
- (2017) Amir Zadpoor INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- Surface nanotopography-induced favorable modulation of bioactivity and osteoconductive potential of anodized 3D printed Ti-6Al-4V alloy mesh structure
- (2017) KC Nune et al. JOURNAL OF BIOMATERIALS APPLICATIONS
- A review of gradient stiffness hydrogels used in tissue engineering and regenerative medicine
- (2017) Tingting Xia et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Comparison of conventional Knoop and Vickers hardness of ceramic materials
- (2017) Ghailen Ben Ghorbal et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Compensation strategy to reduce geometry and mechanics mismatches in porous biomaterials built with Selective Laser Melting
- (2017) Zahra S. Bagheri et al. Journal of the Mechanical Behavior of Biomedical Materials
- Microscopic full-field three-dimensional strain measurement during the mechanical testing of additively manufactured porous biomaterials
- (2017) Katia Genovese et al. Journal of the Mechanical Behavior of Biomedical Materials
- 3D-printed biomaterials with regional auxetic properties
- (2017) John J. Warner et al. Journal of the Mechanical Behavior of Biomedical Materials
- Finite element analysis of mechanical behavior, permeability and fluid induced wall shear stress of high porosity scaffolds with gyroid and lattice-based architectures
- (2017) Davar Ali et al. Journal of the Mechanical Behavior of Biomedical Materials
- How does tissue regeneration influence the mechanical behavior of additively manufactured porous biomaterials?
- (2017) R. Hedayati et al. Journal of the Mechanical Behavior of Biomedical Materials
- Elastic and failure response of imperfect three-dimensional metallic lattices: the role of geometric defects induced by Selective Laser Melting
- (2017) Lu Liu et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Design and fabrication of auxetic PCL nanofiber membranes for biomedical applications
- (2017) Sukhwinder K. Bhullar et al. Materials Science & Engineering C-Materials for Biological Applications
- Comparison on mechanical anisotropies of selective laser melted Ti-6Al-4V alloy and 304 stainless steel
- (2017) Hanchen Yu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Plastic deformation and fracture behaviour of high-nitrogen nickel-free austenitic stainless steel
- (2017) Guixun Sun et al. MATERIALS SCIENCE AND TECHNOLOGY
- Gradient nanocomposite hydrogels for interface tissue engineering
- (2017) Lauren M. Cross et al. Nanomedicine-Nanotechnology Biology and Medicine
- Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness
- (2017) J. B. Berger et al. NATURE
- Functional gradients and heterogeneities in biological materials: Design principles, functions, and bioinspired applications
- (2017) Zengqian Liu et al. PROGRESS IN MATERIALS SCIENCE
- Composites of aluminum alloy and magnesium alloy with graphite showing low thermal expansion and high specific thermal conductivity
- (2017) Valerio Oddone et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Giant thermal expansion and α-precipitation pathways in Ti-alloys
- (2017) Matthias Bönisch et al. Nature Communications
- Auxetic mechanical metamaterials
- (2017) H. M. A. Kolken et al. RSC Advances
- X-ray Tomography Characterisation of Lattice Structures Processed by Selective Electron Beam Melting
- (2017) Everth Hernández-Nava et al. Metals
- Lattice Metamaterials with Mechanically Tunable Poisson’s Ratio for Vibration Control
- (2017) Yanyu Chen et al. Physical Review Applied
- Longitudinal and radial permeability analysis of additively manufactured porous scaffolds: Effect of pore shape and porosity
- (2017) H. Montazerian et al. MATERIALS & DESIGN
- Porous scaffold internal architecture design based on minimal surfaces: A compromise between permeability and elastic properties
- (2017) H. Montazerian et al. MATERIALS & DESIGN
- Compressive properties of functionally graded lattice structures manufactured by selective laser melting
- (2017) Sing Ying Choy et al. MATERIALS & DESIGN
- Flexible mechanical metamaterials
- (2017) Katia Bertoldi et al. Nature Reviews Materials
- Origami lattices with free-form surface ornaments
- (2017) Shahram Janbaz et al. Science Advances
- Antibacterial Behavior of Additively Manufactured Porous Titanium with Nanotubular Surfaces Releasing Silver Ions
- (2016) S. Amin Yavari et al. ACS Applied Materials & Interfaces
- High-strength porous biomaterials for bone replacement: A strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints
- (2016) Sajad Arabnejad et al. Acta Biomaterialia
- The development of TiNi-based negative Poisson's ratio structure using selective laser melting
- (2016) Sheng Li et al. ACTA MATERIALIA
- Additive manufacturing of metals
- (2016) Dirk Herzog et al. ACTA MATERIALIA
- Co–Cr dental alloys induces cytotoxicity and inflammatory responses via activation of Nrf2/antioxidant signaling pathways in human gingival fibroblasts and osteoblasts
- (2016) Eun-Cheol Kim et al. DENTAL MATERIALS
- Comparison of the transformation temperatures of heat-activated Nickel-Titanium orthodontic archwires by two different techniques
- (2016) Noor Aminah Obaisi et al. DENTAL MATERIALS
- Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials
- (2016) R. Hedayati et al. INTERNATIONAL JOURNAL OF FATIGUE
- Selective laser melting of titanium alloy with 50 wt% tantalum: Microstructure and mechanical properties
- (2016) Swee Leong Sing et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Analytical relationships for prediction of the mechanical properties of additively manufactured porous biomaterials
- (2016) Amir Abbas Zadpoor et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- The Needs of Current Implant Technology in Orthopaedic Prosthesis Biomaterials Application to Reduce Prosthesis Failure Rate
- (2016) Ahmad Jabir Rahyussalim et al. Journal of Nanomaterials
- Fully porous 3D printed titanium femoral stem to reduce stress-shielding following total hip arthroplasty
- (2016) Sajad Arabnejad et al. JOURNAL OF ORTHOPAEDIC RESEARCH
- Mechanics of additively manufactured porous biomaterials based on the rhombicuboctahedron unit cell
- (2016) R. Hedayati et al. Journal of the Mechanical Behavior of Biomedical Materials
- Influence of the overall stiffness of a load-bearing porous titanium implant on bone ingrowth in critical-size mandibular bone defects in sheep
- (2016) T. Schouman et al. Journal of the Mechanical Behavior of Biomedical Materials
- Additive manufacturing and mechanical characterization of graded porosity scaffolds designed based on triply periodic minimal surface architectures
- (2016) M. Afshar et al. Journal of the Mechanical Behavior of Biomedical Materials
- Bone bonding strength of diamond-structured porous titanium-alloy implants manufactured using the electron beam-melting technique
- (2016) Daisuke Hara et al. Materials Science & Engineering C-Materials for Biological Applications
- Porous Ti6Al4V alloys with enhanced normalized fatigue strength for biomedical applications
- (2016) Fuping Li et al. Materials Science & Engineering C-Materials for Biological Applications
- Highly porous, low elastic modulus 316L stainless steel scaffold prepared by selective laser melting
- (2016) Jaroslav Čapek et al. Materials Science & Engineering C-Materials for Biological Applications
- Anisotropy in the impact toughness of selective laser melted Ti–6Al–4V alloy
- (2016) Ming-Wei Wu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Characterization of New PEEK/HA Composites with 3D HA Network Fabricated by Extrusion Freeforming
- (2016) Mohammad Vaezi et al. MOLECULES
- A Tubular Biomaterial Construct Exhibiting a Negative Poisson’s Ratio
- (2016) Jin Woo Lee et al. PLoS One
- A simple auxetic tubular structure with tuneable mechanical properties
- (2016) Xin Ren et al. Smart Materials and Structures
- Mechanical Properties of Additively Manufactured Thick Honeycombs
- (2016) Reza Hedayati et al. Materials
- Improved bone formation and ingrowth for additively manufactured porous Ti6Al4V bone implants with strontium laden nanotube array coating
- (2016) Tian-Xiao Han et al. RSC Advances
- Brief Overview on Nitinol as Biomaterial
- (2016) Abdul Wadood Advances in Materials Science and Engineering
- Specific Yielding of Selective Laser-Melted Ti6Al4V Open-Porous Scaffolds as a Function of Unit Cell Design and Dimensions
- (2016) Volker Weißmann et al. Metals
- Influence of the structural orientation on the mechanical properties of selective laser melted Ti6Al4V open-porous scaffolds
- (2016) Volker Weißmann et al. MATERIALS & DESIGN
- Printability of alloys for additive manufacturing
- (2016) T. Mukherjee et al. Scientific Reports
- Improving Osteointegration and Osteogenesis of Three-Dimensional Porous Ti6Al4V Scaffolds by Polydopamine-Assisted Biomimetic Hydroxyapatite Coating
- (2015) Yong Li et al. ACS Applied Materials & Interfaces
- Negative Poisson’s ratios in tendons: An unexpected mechanical response
- (2015) Ruben Gatt et al. Acta Biomaterialia
- Additively manufactured porous tantalum implants
- (2015) Ruben Wauthle et al. Acta Biomaterialia
- Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing
- (2015) Beth E. Carroll et al. ACTA MATERIALIA
- Preliminary Evaluation of Mechanical Properties of Co-Cr Alloys Fabricated by Three New Manufacturing Processes
- (2015) Seong-Ho Jang et al. INTERNATIONAL JOURNAL OF PROSTHODONTICS
- Iron and iron-based alloys for temporary cardiovascular applications
- (2015) A. Francis et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Topology Optimization of Total Femur Structure: Application of Parameterized Level Set Method Under Geometric Constraints
- (2015) Xiaowei Deng et al. JOURNAL OF MECHANICAL DESIGN
- Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials
- (2015) S. Amin Yavari et al. Journal of the Mechanical Behavior of Biomedical Materials
- Ti–6Al–4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting
- (2015) Chunze Yan et al. Journal of the Mechanical Behavior of Biomedical Materials
- Failure mechanisms of additively manufactured porous biomaterials: Effects of porosity and type of unit cell
- (2015) J. Kadkhodapour et al. Journal of the Mechanical Behavior of Biomedical Materials
- Designable dual-material auxetic metamaterials using three-dimensional printing
- (2015) Kan Wang et al. MATERIALS & DESIGN
- Microstructure and corrosion behavior of laser processed NiTi alloy
- (2015) Jithin J. Marattukalam et al. Materials Science & Engineering C-Materials for Biological Applications
- Dynamic electromagnetic metamaterials
- (2015) Kebin Fan et al. Materials Today
- Fabrication and Characterization of Nonwoven Auxetic Polymer Stent
- (2015) Sukhwinder K. Bhullar et al. POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING
- An exploration of binder jetting of copper
- (2015) Yun Bai et al. RAPID PROTOTYPING JOURNAL
- Experiments and parametric studies on 3D metallic auxetic metamaterials with tuneable mechanical properties
- (2015) Xin Ren et al. Smart Materials and Structures
- Biological Strategies for Improved Osseointegration and Osteoinduction of Porous Metal Orthopedic Implants
- (2015) Eric Alexander Lewallen et al. TISSUE ENGINEERING PART B-REVIEWS
- Titanium in Biomedical Applications—Properties and Fabrication: A Review
- (2015) Amir Mahyar Khorasani et al. Journal of Biomaterials and Tissue Engineering
- Vibrant times for mechanical metamaterials
- (2015) Johan Christensen et al. MRS Communications
- Bone tissue regeneration: the role of scaffold geometry
- (2015) Amir A. Zadpoor Biomaterials Science
- Influence of defects on mechanical properties of Ti–6Al–4V components produced by selective laser melting and electron beam melting
- (2015) Haijun Gong et al. MATERIALS & DESIGN
- The effects of solid-state phase transformation upon stress evolution in laser metal powder deposition
- (2015) J.X. Fang et al. MATERIALS & DESIGN
- Additive Manufacturing of Ceramic-Based Materials
- (2014) Nahum Travitzky et al. ADVANCED ENGINEERING MATERIALS
- Experimental validation of 3D printed patient-specific implants using digital image correlation and finite element analysis
- (2014) Alok Sutradhar et al. COMPUTERS IN BIOLOGY AND MEDICINE
- Effects of bio-functionalizing surface treatments on the mechanical behavior of open porous titanium biomaterials
- (2014) S. Amin Yavari et al. Journal of the Mechanical Behavior of Biomedical Materials
- Wear behavior–hardness–microstructure relation of Fe–Cr–C and Fe–Cr–C–B based hardfacing alloys
- (2014) N. Yüksel et al. MATERIALS & DESIGN
- Printability of calcium phosphate: Calcium sulfate powders for the application of tissue engineered bone scaffolds using the 3D printing technique
- (2014) Zuoxin Zhou et al. Materials Science & Engineering C-Materials for Biological Applications
- Tensile properties of a dual-axial forged Ti–Fe–Cu alloy containing boron
- (2014) V.Yu. Zadorozhnyy et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Simple cubic three-dimensional auxetic metamaterials
- (2014) Jianhu Shen et al. PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS
- Programmable Mechanical Metamaterials
- (2014) Bastiaan Florijn et al. PHYSICAL REVIEW LETTERS
- Selective laser melting (SLM) of pure gold for manufacturing dental crowns
- (2014) Mushtaq Khan et al. RAPID PROTOTYPING JOURNAL
- In Vivo Study of a Self-Stabilizing Artificial Vertebral Body Fabricated by Electron Beam Melting
- (2014) Jun Yang et al. SPINE
- New Developments of Ti-Based Alloys for Biomedical Applications
- (2014) Yuhua Li et al. Materials
- Repair of injured spinal cord using biomaterial scaffolds and stem cells
- (2014) Bikesh Shrestha et al. Stem Cell Research & Therapy
- Physico-mechanical properties and prosthodontic applications of Co-Cr dental alloys: a review of the literature
- (2014) Youssef S. Al Jabbari Journal of Advanced Prosthodontics
- Pentamode Metamaterials with Independently Tailored Bulk Modulus and Mass Density
- (2014) Muamer Kadic et al. Physical Review Applied
- Nanodomain structure and its effect on abnormal thermal expansion behavior of a Ti–23Nb–2Zr–0.7Ta–1.2O alloy
- (2013) Hee Young Kim et al. ACTA MATERIALIA
- Tuning the Poisson's Ratio of Biomaterials for Investigating Cellular Response
- (2013) Wande Zhang et al. ADVANCED FUNCTIONAL MATERIALS
- 3D Soft Metamaterials with Negative Poisson's Ratio
- (2013) Sahab Babaee et al. ADVANCED MATERIALS
- Crystal structure and nanotopographical features on the surface of heat-treated and anodized porous titanium biomaterials produced using selective laser melting
- (2013) S. Amin Yavari et al. APPLIED SURFACE SCIENCE
- Cryogenic characteristics of chopped glass fiber reinforced polyurethane foam
- (2013) Young Ho Yu et al. COMPOSITE STRUCTURES
- Effects of scaffold architecture on cranial bone healing
- (2013) A. Berner et al. INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY
- Additive manufacturing: A framework for implementation
- (2013) Stephen Mellor et al. INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS
- Heterogeneous PVA hydrogels with micro-cells of both positive and negative Poisson's ratios
- (2013) Yanxuan Ma et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing
- (2013) G. Campoli et al. MATERIALS & DESIGN
- Comparative study on corrosion behaviour of Nitinol and stainless steel orthodontic wires in simulated saliva solution in presence of fluoride ions
- (2013) M. Mirjalili et al. Materials Science & Engineering C-Materials for Biological Applications
- Production of customized hip stem prostheses – a comparison between conventional machining and electron beam melting (EBM)
- (2013) Marie Cronskär et al. RAPID PROTOTYPING JOURNAL
- Topology optimization approaches
- (2013) Ole Sigmund et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- The Effect of Negative Poisson’s Ratio Polyurethane Scaffolds for Articular Cartilage Tissue Engineering Applications
- (2013) Yeong Jun Park et al. Advances in Materials Science and Engineering
- Spatial tuning of negative and positive Poisson’s ratio in a multi-layer scaffold
- (2012) Pranav Soman et al. Acta Biomaterialia
- Biomedical coatings on magnesium alloys – A review
- (2012) H. Hornberger et al. Acta Biomaterialia
- On the practicability of pentamode mechanical metamaterials
- (2012) Muamer Kadic et al. APPLIED PHYSICS LETTERS
- Evaluations of cellular lattice structures manufactured using selective laser melting
- (2012) Chunze Yan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Characterizations of additive manufactured porous titanium implants
- (2012) Ahmad Basalah et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- 3D-printing of highly uniform CaSiO3 ceramic scaffolds: preparation, characterization and in vivo osteogenesis
- (2012) Chengtie Wu et al. JOURNAL OF MATERIALS CHEMISTRY
- Preparation and Characterization of Sustainable Polyurethane Foams from Soybean Oils
- (2012) Ruijun Gu et al. JOURNAL OF THE AMERICAN OIL CHEMISTS SOCIETY
- In vitro biocompatibility of Co–Cr alloy fabricated by selective laser melting or traditional casting techniques
- (2012) X.Z. Xin et al. MATERIALS LETTERS
- A three-dimensional polymer scaffolding material exhibiting a zero Poisson's ratio
- (2012) Pranav Soman et al. Soft Matter
- Geometry as a Factor for Tissue Growth: Towards Shape Optimization of Tissue Engineering Scaffolds
- (2012) Cécile M. Bidan et al. Advanced Healthcare Materials
- Osteoinduction of porous Ti implants with a channel structure fabricated by selective laser melting
- (2011) A. Fukuda et al. Acta Biomaterialia
- Printability of calcium phosphate powders for three-dimensional printing of tissue engineering scaffolds
- (2011) Andre Butscher et al. Acta Biomaterialia
- Prediction of permeability of regular scaffolds for skeletal tissue engineering: A combined computational and experimental study
- (2011) S. Truscello et al. Acta Biomaterialia
- Finding Auxetic Frameworks in Periodic Tessellations
- (2011) Holger Mitschke et al. ADVANCED MATERIALS
- Mechanical characterisation of a periodic auxetic structure produced by SEBM
- (2011) J. Schwerdtfeger et al. PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS
- Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy
- (2011) L.C. Zhang et al. SCRIPTA MATERIALIA
- Fabrication of three-dimensional scaffolds using precision extrusion deposition with an assisted cooling device
- (2011) Q Hamid et al. Biofabrication
- Porous tantalum structures for bone implants: Fabrication, mechanical and in vitro biological properties
- (2010) Vamsi Krishna Balla et al. Acta Biomaterialia
- A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
- (2010) Lore Thijs et al. ACTA MATERIALIA
- Electron beam melting of Ti–48Al–2Cr–2Nb alloy: Microstructure and mechanical properties investigation
- (2010) S. Biamino et al. INTERMETALLICS
- Tantalum—A bioactive metal for implants
- (2010) Vamsi Krishna Balla et al. JOM
- The microstructure and mechanical properties of friction stir welded Al–Zn–Mg alloy in as welded and heat treated conditions
- (2010) R.K.R. Singh et al. MATERIALS & DESIGN
- Grain growth and grain size effects on the thermal expansion properties of an electrodeposited Fe–Ni invar alloy
- (2010) Yichun Liu et al. SCRIPTA MATERIALIA
- Direct laser processing of a tantalum coating on titanium for bone replacement structures
- (2009) Vamsi Krishna Balla et al. Acta Biomaterialia
- Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting
- (2009) L.E. Murr et al. ACTA MATERIALIA
- Biomaterial Design Strategies for the Treatment of Spinal Cord Injuries
- (2009) Karin S. Straley et al. JOURNAL OF NEUROTRAUMA
- Design and fabrication of CoCrMo alloy based novel structures for load bearing implants using laser engineered net shaping
- (2009) Félix A. España et al. Materials Science & Engineering C-Materials for Biological Applications
- Software survey: VOSviewer, a computer program for bibliometric mapping
- (2009) Nees Jan van Eck et al. SCIENTOMETRICS
- Comparison of the bond strength of laser-sintered and cast base metal dental alloys to porcelain
- (2008) Tolga Akova et al. DENTAL MATERIALS
- Auxetic materials for bioprostheses [In the Spotlight]
- (2008) Fabrizio Scarpa IEEE SIGNAL PROCESSING MAGAZINE
- 3D finite element temperature field modelling for direct laser fabrication
- (2008) Jia Yang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A critical literature review of focused electron beam induced deposition
- (2008) W. F. van Dorp et al. JOURNAL OF APPLIED PHYSICS
- Ceramics for medical applications: A picture for the next 20 years
- (2008) J. Chevalier et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Fabrication of Ti-6Al-4V Scaffolds by Direct Metal Deposition
- (2008) G.P. Dinda et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Metal-Ceramic Alloys in Dentistry: A Review
- (2008) Howard W. Roberts et al. Journal of Prosthodontics-Implant Esthetic and Reconstructive Dentistry
- Functionally graded Co–Cr–Mo coating on Ti–6Al–4V alloy structures
- (2007) B. Vamsi Krishna et al. Acta Biomaterialia
- An experimental study on static behavior of a GFRP bridge deck filled with a polyurethane foam
- (2007) Goangseup Zi et al. COMPOSITE STRUCTURES
- The quasi-static and blast loading response of lattice structures
- (2007) S. McKown et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Study of hardness and wear behaviour of NiTi shape memory alloys
- (2007) M. Arciniegas et al. JOURNAL OF ALLOYS AND COMPOUNDS
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search