Additively Manufactured Gradient Porous Ti–6Al–4V Hip Replacement Implants Embedded with Cell-Laden Gelatin Methacryloyl Hydrogels

3D-Printed Ultra-Robust Surface-Doped Porous Silicone Sensors for Wearable Biomonitoring

(2020) Elham Davoodi et al.   ACS Nano

Extrusion and Microfluidic‐Based Bioprinting to Fabricate Biomimetic Tissues and Organs

(2020) Elham Davoodi et al.   Advanced Materials Technologies

Nanopatterned Titanium Implants Accelerate Bone Formation In Vivo

(2020) Andrew I.M. Greer et al.   ACS Applied Materials & Interfaces

Sacrificial 3D printing of shrinkable silicone elastomers for enhanced feature resolution in flexible tissue scaffolds

(2020) Elham Davoodi et al.   Acta Biomaterialia

Insights into unit cell size effect on mechanical responses and energy absorption capability of titanium graded porous structures manufactured by laser powder bed fusion

(2020) Lei Yang et al.   Journal of the Mechanical Behavior of Biomedical Materials

Bone loss around oral and orthopedic implants: An immunologically based condition

(2019) Tomas Albrektsson et al.   Clinical Implant Dentistry and Related Research

Additively manufactured functionally graded biodegradable porous iron

(2019) Y. Li et al.   Acta Biomaterialia

Permeability and mechanical properties of gradient porous PDMS scaffolds fabricated by 3D-printed sacrificial templates designed with minimal surfaces

(2019) H. Montazerian et al.   Acta Biomaterialia

Optimization of Bone Scaffold Porosity Distributions

(2019) Patrina S. P. Poh et al.   Scientific Reports

Scaffolds with a High Surface Area-to-Volume Ratio and Cultured Under Fast Flow Perfusion Result in Optimal O2 Delivery to the Cells in Artificial Bone Tissues

(2019) Thanh Danh Nguyen et al.   Applied Sciences-Basel

3D inkjet printing of biomaterials with strength reliability and cytocompatibility: Quantitative process strategy for Ti-6Al-4V

(2019) Srimanta Barui et al.   BIOMATERIALS

The manufacturability and compression properties of the Schwarz Diamond type Ti6Al4V cellular lattice fabricated by selective laser melting

(2019) Joanna Maszybrocka et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Topology optimization and characterization of Ti6Al4V ELI cellular lattice structures by laser powder bed fusion for biomedical applications

(2019) A.M. Vilardell et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Substrate curvature as a cue to guide spatiotemporal cell and tissue organization

(2019) Sebastien J.P. Callens et al.   BIOMATERIALS

Modelling of laser powder bed fusion process and analysing the effective parameters on surface characteristics of Ti-6Al-4V

(2019) Amir Mahyar Khorasani et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Customizing mechanical properties of additively manufactured Hastelloy X parts by adjusting laser scanning speed

(2019) Reza Esmaeilizadeh et al.   JOURNAL OF ALLOYS AND COMPOUNDS

An investigation into the effect of gradients on the manufacturing fidelity of triply periodic minimal surface structures with graded density fabricated by selective laser melting

(2019) Lei Yang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Deformation and failure mechanisms of Ti–6Al–4V as built by selective laser melting

(2019) Atieh Moridi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of geometry on the mechanical properties of Ti-6Al-4V Gyroid structures fabricated via SLM: A numerical study

(2019) Eric Yang et al.   MATERIALS & DESIGN

Hydromechanical mechanism behind the effect of pore size of porous titanium scaffolds on osteoblast response and bone ingrowth

(2019) Pengrong Ouyang et al.   MATERIALS & DESIGN

Microarchitected Stretching-Dominated Mechanical Metamaterials with Minimal Surface Topologies

(2018) Oraib Al-Ketan et al.   ADVANCED ENGINEERING MATERIALS

Additive manufacturing functionally graded titanium structures with selective closed cell layout and controlled morphology

(2018) Esmat Sheydaeian et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Osteogenesis of 3D printed porous Ti6Al4V implants with different pore sizes

(2018) Qichun Ran et al.   Journal of the Mechanical Behavior of Biomedical Materials

Mimicking corneal stroma using keratocyte-loaded photopolymerizable methacrylated gelatin hydrogels

(2018) Cemile Kilic Bektas et al.   Journal of Tissue Engineering and Regenerative Medicine

Rationally designed meta-implants: a combination of auxetic and conventional meta-biomaterials

(2018) Helena M. A. Kolken et al.   Materials Horizons

Mechanical Properties and In Vitro Behavior of Additively Manufactured and Functionally Graded Ti6Al4V Porous Scaffolds

(2018) Ezgi Onal et al.   Metals

Ultrahigh-strength titanium gyroid scaffolds manufactured by selective laser melting (SLM) for bone implant applications

(2018) Arash Ataee et al.   ACTA MATERIALIA

Hip Implant Design With Three-Dimensional Porous Architecture of Optimized Graded Density

(2018) Yingjun Wang et al.   JOURNAL OF MECHANICAL DESIGN

Development of novel three-dimensional scaffolds based on bacterial nanocellulose for tissue engineering and regenerative medicine: Effect of processing methods, pore size, and surface area

(2018) Marlon Osorio et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Synthesis and Properties of Gelatin Methacryloyl (GelMA) Hydrogels and Their Recent Applications in Load-Bearing Tissue

(2018) Mingyue Sun et al.   Polymers

Analysis of factors influencing bone ingrowth into three-dimensional printed porous metal scaffolds: A review

(2017) Zhonghan Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The relationships between deformation mechanisms and mechanical properties of additively manufactured porous biomaterials

(2017) J. Kadkhodapour et al.   Journal of the Mechanical Behavior of Biomedical Materials

The effect of patient age at intervention on risk of implant revision after total replacement of the hip or knee: a population-based cohort study

(2017) Lee E Bayliss et al.   LANCET

In vitro and in vivo analysis of visible light crosslinkable gelatin methacryloyl (GelMA) hydrogels

(2017) Iman Noshadi et al.   Biomaterials Science

Longitudinal and radial permeability analysis of additively manufactured porous scaffolds: Effect of pore shape and porosity

(2017) H. Montazerian et al.   MATERIALS & DESIGN

Material process development for the fabrication of heterogeneous titanium structures with selective pore morphology by a hybrid additive manufacturing process

(2017) Esmat Sheydaeian et al.   MATERIALS & DESIGN

Porous scaffold internal architecture design based on minimal surfaces: A compromise between permeability and elastic properties

(2017) H. Montazerian et al.   MATERIALS & DESIGN

3D printed stretching-dominated micro-trusses

(2017) Manpreet Kaur et al.   MATERIALS & DESIGN

Predicting permeability of regular tissue engineering scaffolds: scaling analysis of pore architecture, scaffold length, and fluid flow rate effects

(2016) A. Rahbari et al.   COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING

On the influence of sintering protocols and layer thickness on the physical and mechanical properties of additive manufactured titanium porous bio-structures

(2016) Ahmad Basalah et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Fully porous 3D printed titanium femoral stem to reduce stress-shielding following total hip arthroplasty

(2016) Sajad Arabnejad et al.   JOURNAL OF ORTHOPAEDIC RESEARCH

Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment

(2016) Naoya Taniguchi et al.   Materials Science & Engineering C-Materials for Biological Applications

Controlled Unusual Stiffness of Mechanical Metamaterials

(2016) Wooju Lee et al.   Scientific Reports

Mechanical properties of additive-manufactured porous titanium bio-structures with oriented macro-scale channels

(2015) Ahmad Basalah et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting

(2015) Chunlei Qiu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Tough bonding of hydrogels to diverse non-porous surfaces

(2015) Hyunwoo Yuk et al.   NATURE MATERIALS

Influence of Different Three-Dimensional Open Porous Titanium Scaffold Designs on Human Osteoblasts Behavior in Static and Dynamic Cell Investigations

(2015) Jana Markhoff et al.   Materials

Controlling Shear Stress in 3D Bioprinting is a Key Factor to Balance Printing Resolution and Stem Cell Integrity

(2015) Andreas Blaeser et al.   Advanced Healthcare Materials

Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing

(2014) Wayne E. King et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

An investigation into the flexural characteristics of functionally graded cobalt chrome femoral stems manufactured using selective laser melting

(2014) Kevin Brian Hazlehurst et al.   MATERIALS & DESIGN

Multi-objective design optimization of functionally graded material for the femoral component of a total knee replacement

(2013) Marjan Bahraminasab et al.   MATERIALS & DESIGN

Characterizations of additive manufactured porous titanium implants

(2012) Ahmad Basalah et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

Fiji: an open-source platform for biological-image analysis

(2012) Johannes Schindelin et al.   NATURE METHODS

Effect of Polycaprolactone Scaffold Permeability on Bone Regeneration In Vivo

(2011) Anna G. Mitsak et al.   TISSUE ENGINEERING PART A

Cell-laden microengineered gelatin methacrylate hydrogels

(2010) Jason W. Nichol et al.   BIOMATERIALS