Nano-enhanced biolubricant in sustainable manufacturing: From processability to mechanisms
出版年份 2022 全文链接
标题
Nano-enhanced biolubricant in sustainable manufacturing: From processability to mechanisms
作者
关键词
-
出版物
Friction
Volume -, Issue -, Pages -
出版商
Springer Science and Business Media LLC
发表日期
2022-01-14
DOI
10.1007/s40544-021-0536-y
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Energy, Environmental, Economic, and Technological Analysis of Al-GnP Nanofluid- and Cryogenic LN2-Assisted Sustainable Machining of Ti-6Al-4V Alloy
- (2021) Aqib Mashood Khan et al. Metals
- Physicochemical properties of degradable vegetable-based oils on minimum quantity lubrication milling
- (2020) Xiufang Bai et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Milling force and surface morphology of 45 steel under different Al2O3 nanofluid concentrations
- (2020) Zhenjing Duan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Evaluation of size effect and improvement in surface characteristics using sunflower oil-based MQL for sustainable micro-endmilling of Inconel 718
- (2020) K. N. Anand et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Comparative evaluation of soybean oil–based MQL flow rates and emulsion flood cooling strategy in high-speed face milling of Inconel 718
- (2020) Anthony Chukwujekwu Okafor et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Application of conventional and hybrid nanofluids in different machining processes: A critical review
- (2020) Mohammad Hemmat Esfe et al. ADVANCES IN COLLOID AND INTERFACE SCIENCE
- Sustainability-based performance evaluation of hybrid nanofluid assisted machining
- (2020) Aqib Mashood Khan et al. JOURNAL OF CLEANER PRODUCTION
- Energy-based cost integrated modelling and sustainability assessment of Al-GnP hybrid nanofluid assisted turning of AISI52100 steel
- (2020) Aqib Mashood Khan et al. JOURNAL OF CLEANER PRODUCTION
- Refining and Sulfurization of Oil from Black Soldier Fly and Its Application as Biodegradable Lubricant Additive
- (2020) Jing Xiong et al. JOURNAL OF THE AMERICAN OIL CHEMISTS SOCIETY
- Superior lubrication performance of MoS2-Al2O3 composite nanofluid in strips hot rolling
- (2020) Jiaqi He et al. Journal of Manufacturing Processes
- Preparation, characterization, tribological and lubrication performances of Eu doped CaWO4 nanoparticle as anti-wear additive in water-soluble fluid for steel strip during hot rolling
- (2020) Sang Xiong et al. APPLIED SURFACE SCIENCE
- Nanofluids assisted environmental friendly lubricating strategies for the surface grinding of titanium alloy: Ti6Al4V-ELI
- (2019) Harpinder Singh et al. Journal of Manufacturing Processes
- Evaluation of tool life and workpiece surface roughness in turning of AISI D6 hardened steel using PCBN tools and minimum quantity of lubricant (MQL) applied at different directions
- (2019) Miguel Mandú Bonfá et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of hybrid Al2O3-CNT nanofluids and cryogenic cooling on machining of Ti–6Al–4V
- (2019) Muhammad Jamil et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Predictive model for minimum chip thickness and size effect in single diamond grain grinding of zirconia ceramics under different lubricating conditions
- (2019) Min Yang et al. CERAMICS INTERNATIONAL
- End milling of AISI 304 steel using Minimum Quantity Lubrication
- (2019) M. Naresh Babu et al. MEASUREMENT
- Tribological properties under the grinding wheel and workpiece interface by using graphene nanofluid lubricant
- (2019) Xin Cui et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of Al2O3 and palm oil–mixed nano-fluid on machining performances of Inconel-690: IF-THEN rules–based FIS model in eco-benign milling
- (2019) Binayak Sen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experiment evaluation of grinding properties under Al2O3 nanofluids in minimum quantity lubrication
- (2019) Roshan Lal Virdi et al. Materials Research Express
- A comprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fluids
- (2019) Zafar Said et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Performance and evaluation of MoS2 based machining using PVD-TiAlN coated tool
- (2019) Viswanathan Sivaraman et al. Journal of Mechanical Science and Technology
- Experimental investigations on surface grinding of silicon nitride subjected to mono and hybrid nanofluids
- (2019) Anil Kumar et al. CERAMICS INTERNATIONAL
- Experimental investigation of nanofluids in minimum quantity lubrication during turning of EN-24 steel
- (2019) Archana Thakur et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Performance Evaluation of Vegetable Oil-Based Nano-Cutting Fluids in Environmentally Friendly Machining of Inconel-800 Alloy
- (2019) Munish Kumar Gupta et al. Materials
- A study of viscosity and thermal conductivity of vegetable oils as base cutting fluids for minimum quantity lubrication machining of difficult-to-cut metals
- (2019) Anthony Chukwujekwu Okafor et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Nonedible vegetable oil-based cutting fluids for machining processes – a review
- (2019) Rahul Katna et al. MATERIALS AND MANUFACTURING PROCESSES
- Exploration of graphene assisted vegetables oil based minimum quantity lubrication for surface grinding of TI-6AL-4V-ELI
- (2019) Harpinder Singh et al. TRIBOLOGY INTERNATIONAL
- Analysis of volume ratio of castor/soybean oil mixture on minimum quantity lubrication grinding performance and microstructure evaluation by fractal dimension
- (2018) Shuming Guo et al. INDUSTRIAL CROPS AND PRODUCTS
- Tribological and machining characteristics of a minimum quantity lubrication (MQL) technology using GO/SiO2 hybrid nanoparticle water-based lubricants as cutting fluids
- (2018) Tao Lv et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Spectral analysis and power spectral density evaluation in Al2O3 nanofluid minimum quantity lubrication milling of 45 steel
- (2018) Qingan Yin et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Prediction of temperature distribution over cutting tool with alumina-MWCNT hybrid nanofluid using computational fluid dynamics (CFD) analysis
- (2018) Anuj Kumar Sharma et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Evaluation of mist flow characteristic and performance in Minimum Quantity Lubrication (MQL) machining
- (2018) Erween Abd Rahim et al. MEASUREMENT
- Parametric and nonparametric description of the surface topography in the dry and MQCL cutting conditions
- (2018) G.M. Krolczyk et al. MEASUREMENT
- A review on the chemistry, production, and technological potential of bio-based lubricants
- (2018) N.A. Zainal et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Performance of modified jatropha oil in combination with hexagonal boron nitride particles as a bio-based lubricant for green machining
- (2018) N. Talib et al. TRIBOLOGY INTERNATIONAL
- Experimental Investigation on the Compatibility of Nanoparticles with Vegetable Oils for Nanofluid Minimum Quantity Lubrication Machining
- (2018) Songmei Yuan et al. TRIBOLOGY LETTERS
- Influence of alumina/MWCNT hybrid nanoparticle additives on tribological properties of lubricants in turning operations
- (2018) Anuj Kumar Sharma et al. Friction
- Preparation, characterization and lubrication performances of graphene oxide-TiO2 nanofluid in rolling strips
- (2018) Shaonan Du et al. CARBON
- MQL milling of TC4 alloy by dispersing graphene into vegetable oil-based cutting fluid
- (2018) Ming Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of the physicochemical properties of different nanoparticles on lubrication performance and experimental evaluation in the NMQL milling of Ti–6Al–4V
- (2018) Qingan Yin et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- An experimental investigation on the effects of minimum quantity nano lubricant application in grinding process of Tungsten carbide
- (2018) S.F. Hosseini et al. Journal of Manufacturing Processes
- Influence of minimum quantity lubrication on surface integrity of ground hardened H13 hot die steel
- (2018) A. S. Awale et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Dispersing mechanism and tribological performance of vegetable oil-based CNT nanofluids with different surfactants
- (2018) Teng Gao et al. TRIBOLOGY INTERNATIONAL
- Machining performance of vegetable oil with phosphonium- and ammonium-based ionic liquids via MQL technique
- (2018) Amiril Sahab Abdul Sani et al. JOURNAL OF CLEANER PRODUCTION
- Thermal, rheological, wettability and hard machining performance of MoS2 and CaF2 based minimum quantity hybrid nano-green cutting fluids
- (2018) Kishor Kumar Gajrani et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Evaluation of modified jatropha-based oil with hexagonal boron nitride particle as a biolubricant in orthogonal cutting process
- (2017) N. Talib et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental investigation into lubrication properties and mechanism of vegetable-based CuO nanofluid in MQL grinding
- (2017) Mohammadreza Shabgard et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Heat transfer performance of MQL grinding with different nanofluids for Ni-based alloys using vegetable oil
- (2017) Benkai Li et al. JOURNAL OF CLEANER PRODUCTION
- Lubri-cooling and tribological behavior of vegetable oils during milling of AISI 1045 steel focusing on sustainable manufacturing
- (2017) Antônio Santos Araújo Junior et al. JOURNAL OF CLEANER PRODUCTION
- Experimental evaluation of the lubrication performance of mixtures of castor oil with other vegetable oils in MQL grinding of nickel-based alloy
- (2017) Shuming Guo et al. JOURNAL OF CLEANER PRODUCTION
- Experimental evaluation on tribological performance of the wheel/workpiece interface in minimum quantity lubrication grinding with different concentrations of Al 2 O 3 nanofluids
- (2017) Yaogang Wang et al. JOURNAL OF CLEANER PRODUCTION
- Performance evaluation of alumina-graphene hybrid nano-cutting fluid in hard turning
- (2017) Rabesh Kumar Singh et al. JOURNAL OF CLEANER PRODUCTION
- Process parameter optimization and experimental evaluation for nanofluid MQL in grinding Ti-6Al-4V based on grey relational analysis
- (2017) Guotao Liu et al. MATERIALS AND MANUFACTURING PROCESSES
- Lubricating property of MQL grinding of Al 2 O 3 /SiC mixed nanofluid with different particle sizes and microtopography analysis by cross-correlation
- (2017) Xianpeng Zhang et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Specific energy and surface roughness of minimum quantity lubrication grinding Ni-based alloy with mixed vegetable oil-based nanofluids
- (2017) Dongzhou Jia et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Sustainable production framework for cement manufacturing firms: A behavioural perspective
- (2017) Zongwei Luo et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Tribological properties of ZnO and WS 2 nanofluids using different surfactants
- (2017) Jingxuan Guo et al. WEAR
- Comparative evaluation of the lubricating properties of vegetable-oil-based nanofluids between frictional test and grinding experiment
- (2017) Yaogang Wang et al. Journal of Manufacturing Processes
- Novel uses of alumina-MoS 2 hybrid nanoparticle enriched cutting fluid in hard turning of AISI 304 steel
- (2017) Anuj Kumar Sharma et al. Journal of Manufacturing Processes
- Grinding temperature and energy ratio coefficient in MQL grinding of high-temperature nickel-base alloy by using different vegetable oils as base oil
- (2016) Benkai Li et al. Chinese Journal of Aeronautics
- Performances of Al2O3/SiC hybrid nanofluids in minimum-quantity lubrication grinding
- (2016) Xianpeng Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental evaluation of cooling performance by friction coefficient and specific friction energy in nanofluid minimum quantity lubrication grinding with different types of vegetable oil
- (2016) Yanbin Zhang et al. JOURNAL OF CLEANER PRODUCTION
- Experimental evaluation of the lubrication properties of the wheel/workpiece interface in minimum quantity lubrication (MQL) grinding using different types of vegetable oils
- (2016) Yaogang Wang et al. JOURNAL OF CLEANER PRODUCTION
- Experimental study on the effect of nanoparticle concentration on the lubricating property of nanofluids for MQL grinding of Ni-based alloy
- (2016) Yanbin Zhang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Experimental research on microscale grinding temperature under different nanoparticle jet minimum quantity cooling
- (2016) Min Yang et al. MATERIALS AND MANUFACTURING PROCESSES
- An Investigation on the Tribological Performances of the SiO2/MoS2 Hybrid Nanofluids for Magnesium Alloy-Steel Contacts
- (2016) Hongmei Xie et al. Nanoscale Research Letters
- Environmental impacts and hazards associated with metal working fluids and recent advances in the sustainable systems: A review
- (2016) M.S. Najiha et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Experimental evaluation of the lubrication properties of the wheel/workpiece interface in MQL grinding with different nanofluids
- (2016) Yaogang Wang et al. TRIBOLOGY INTERNATIONAL
- Effectiveness of vegetable oil based nanofluids as potential cutting fluids in turning AISI 1040 steel
- (2016) R. Padmini et al. TRIBOLOGY INTERNATIONAL
- An Investigation on the Tribological Performances of the SiO2/MoS2 Hybrid Nanofluids for Magnesium Alloy-Steel Contacts
- (2016) Hongmei Xie et al. Nanoscale Research Letters
- Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding
- (2015) Dongkun Zhang et al. Chinese Journal of Aeronautics
- Measurements of the contact angle of nanofluids and development of a new correlation
- (2015) Jabez Chinnam et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- Improvement of useful flow rate of grinding fluid with simulation schemes
- (2015) Yanbin Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Performance evaluation of nanofluid MQL with vegetable-based oil and ester oil as base fluids in turning
- (2015) Yu Su et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental research on the energy ratio coefficient and specific grinding energy in nanoparticle jet MQL grinding
- (2015) Dongkun Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental research on the influence of the jet parameters of minimum quantity lubrication on the lubricating property of Ni-based alloy grinding
- (2015) Dongzhou Jia et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding
- (2015) Yanbin Zhang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Assessment of spray quality from an external mix nozzle and its impact on SQL grinding performance
- (2015) S. Shiva Sai et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Experimental evaluation on tribological properties of nano-particle jet MQL grinding
- (2015) Changhe Li et al. International Journal of Surface Science and Engineering
- Experimental evaluation of MoS2 nanoparticles in jet MQL grinding with different types of vegetable oil as base oil
- (2015) Yanbin Zhang et al. JOURNAL OF CLEANER PRODUCTION
- The Effect of Processing Parameters on the Performance of Spark Plasma Sintered cBN-WC-Co Composites
- (2015) Cong Mao et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Experimental evaluation of nano-molybdenum disulphide and nano-boric acid suspensions in vegetable oils as prospective cutting fluids during turning of AISI 1040 steel
- (2015) R Padmini et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Oxidation and low temperature stability of polymerized soybean oil-based lubricants
- (2015) Zengshe Liu et al. THERMOCHIMICA ACTA
- Flow visualization and characterization for optimized MQL machining of composites
- (2014) Y. Iskandar et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Investigation on the Effect of Nanofluid Parameters on MQL Grinding
- (2013) Cong Mao et al. MATERIALS AND MANUFACTURING PROCESSES
- Effect of nanoparticles on heat capacity of nanofluids based on molten salts as PCM for thermal energy storage
- (2013) Manila Chieruzzi et al. Nanoscale Research Letters
- On the flow characteristics of nanofluids by experimental approach and molecular dynamics simulation
- (2012) Wenzheng Cui et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids
- (2012) A. Shokrani et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Comparative study of the oxidative and thermal stability of vegetable oils to be used as lubricant bases
- (2012) José Roberto dos Santos Politi et al. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
- Tribological Effects of BN and MoS2 Nanoparticles Added to Polyalphaolefin Oil in Piston Skirt/Cylinder Liner Tests
- (2012) Nicholaos G. Demas et al. TRIBOLOGY LETTERS
- Study of specific energy and friction coefficient in minimum quantity lubrication grinding using oil-based nanolubricants
- (2012) Parash Kalita et al. Journal of Manufacturing Processes
- A Heat Transfer Model Based on Finite Difference Method for Grinding
- (2011) Bin Shen et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Tribological Properties of Lubricating Oil-Based Nanofluids with Metal/Carbon Nanoparticles
- (2011) Cheol Choi et al. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY
- AN ANALYSIS OF SURFACE INTEGRITY WHEN DRILLING INCONEL 718 USING PALM OIL AND SYNTHETIC ESTER UNDER MQL CONDITION
- (2011) Erween A. Rahim et al. MACHINING SCIENCE AND TECHNOLOGY
- Dispersion of carbon nanotubes with SDS surfactants: a study from a binding energy perspective
- (2011) Wen Hui Duan et al. Chemical Science
- Experimental investigation on the performance of nanoboric acid suspensions in SAE-40 and coconut oil during turning of AISI 1040 steel
- (2010) P. Vamsi Krishna et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys
- (2010) E.A. Rahim et al. TRIBOLOGY INTERNATIONAL
- An investigation on surface grinding of AISI 4140 hardened steel using minimum quantity lubrication-MQL technique
- (2010) M. H. Sadeghi et al. International Journal of Material Forming
- An experimental investigation of the effects of workpiece and grinding parameters on minimum quantity lubrication—MQL grinding
- (2009) T. Tawakoli et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effects of minimum quantity lubrication on turning AISI 9310 alloy steel using vegetable oil-based cutting fluid
- (2009) M.M.A. Khan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Understanding the Role of Nanoparticles in Nano-oil Lubrication
- (2009) Kwangho Lee et al. TRIBOLOGY LETTERS
- A review on nanofluids - part I: theoretical and numerical investigations
- (2008) Xiang-Qi Wang et al. BRAZILIAN JOURNAL OF CHEMICAL ENGINEERING
- Optimisation of fluid application in grinding
- (2008) M.N. Morgan et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Friction and wear behavior of thioether hydroxy vegetable oil
- (2008) Brajendra K. Sharma et al. TRIBOLOGY INTERNATIONAL
- Application of Nanofluids in Minimum Quantity Lubrication Grinding
- (2008) Bin Shen et al. TRIBOLOGY TRANSACTIONS
- Hard turning of an alloy steel on a machine tool with a polymer concrete bed
- (2007) C. Bruni et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search