标题
Nonedible vegetable oil-based cutting fluids for machining processes – a review
作者
关键词
-
出版物
MATERIALS AND MANUFACTURING PROCESSES
Volume 35, Issue 1, Pages 1-32
出版商
Informa UK Limited
发表日期
2019-12-18
DOI
10.1080/10426914.2019.1697446
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Analysis of the cooling performance of Ti–6Al–4V in minimum quantity lubricant milling with different nanoparticles
- (2019) Lan Dong et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental evaluation of physicochemical properties and tapping torque of hexagonal boron nitride in modified jatropha oils-based as sustainable metalworking fluids
- (2018) N. Talib et al. JOURNAL OF CLEANER PRODUCTION
- Regeneration and purification of water-soluble cutting fluid through ozone treatment using an air dielectric barrier discharge
- (2018) Sukhwal Ma et al. SEPARATION AND PURIFICATION TECHNOLOGY
- Tribological investigations on the application of oil-miscible ionic liquids additives in modified Jatropha-based metalworking fluid
- (2018) S.A.S. Amiril et al. TRIBOLOGY INTERNATIONAL
- Treatment of Cutting Fluid Waste using Activated Carbon Fiber Supported Nanometer Iron as a Heterogeneous Fenton Catalyst
- (2018) Chunjian Su et al. Scientific Reports
- The influence of modified vegetable oils on tool failure mode and wear mechanisms when turning AISI 1045
- (2018) Amiril Sahab Abdul Sani et al. TRIBOLOGY INTERNATIONAL
- Machining performance of vegetable oil with phosphonium- and ammonium-based ionic liquids via MQL technique
- (2018) Amiril Sahab Abdul Sani et al. JOURNAL OF CLEANER PRODUCTION
- Production optimization and tribological characteristics of cottonseed oil methyl ester
- (2018) M. Jamshaid et al. JOURNAL OF CLEANER PRODUCTION
- Use of Jatropha and Moringa oils for lubricants: Metalworking fluids more environmental-friendly
- (2018) Milena Chanes de Souza et al. INDUSTRIAL CROPS AND PRODUCTS
- Recent progress on the application of nanofluids in minimum quantity lubrication machining: A review
- (2017) Nor Azwadi Che Sidik et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Experimental evaluation of the lubrication performance of mixtures of castor oil with other vegetable oils in MQL grinding of nickel-based alloy
- (2017) Shuming Guo et al. JOURNAL OF CLEANER PRODUCTION
- Freeze-thaw method for oil recovery from waste cutting fluid without chemical additions
- (2017) Wanli Feng et al. JOURNAL OF CLEANER PRODUCTION
- Green manufacturing—performance of a biodegradable cutting fluid
- (2017) Rahul Katna et al. MATERIALS AND MANUFACTURING PROCESSES
- Synergistic effects between alkylphosphate-ammonium ionic liquid and alkylphenylborate as lubricant additives in rapeseed oil
- (2017) Zhipeng Li et al. TRIBOLOGY INTERNATIONAL
- Grinding temperature and energy ratio coefficient in MQL grinding of high-temperature nickel-base alloy by using different vegetable oils as base oil
- (2016) Benkai Li et al. Chinese Journal of Aeronautics
- Potential of alternative lubrication strategies for metal cutting processes: a review
- (2016) Muhammed Nadeem Sharif et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Environmental impacts and hazards associated with metal working fluids and recent advances in the sustainable systems: A review
- (2016) M.S. Najiha et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- An overview of inorganic polymer as potential lubricant additive for high temperature tribology
- (2016) Shanhong Wan et al. TRIBOLOGY INTERNATIONAL
- Metalworking fluids—Mechanisms and performance
- (2015) E. Brinksmeier et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Performance evaluation of vegetable emulsifier based green cutting fluid in turning of American Iron and Steel Institute (AISI) 1040 steel – an initiative towards sustainable manufacturing
- (2015) R.R. Srikant et al. JOURNAL OF CLEANER PRODUCTION
- Machining and ecological effects of a new developed cutting fluid in combination with different cooling techniques on turning operation
- (2015) Yousef Shokoohi et al. JOURNAL OF CLEANER PRODUCTION
- Tribological Properties of the Castor Oil Affected by the Additive of the Ionic Liquid [HMIM]BF4
- (2015) Qian Shanhua et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- The effect of cutting fluids applied in metal cutting process
- (2015) Pei Yan et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Monitoring the tool wear, surface roughness and chip formation occurrences using multiple sensors in turning
- (2014) M.S.H. Bhuiyan et al. JOURNAL OF MANUFACTURING SYSTEMS
- Vegetable oil based eco-friendly coating materials: A review article
- (2014) Manawwer Alam et al. Arabian Journal of Chemistry
- Evaluation of vegetable and mineral oil-in-water emulsion cutting fluids in turning AISI 4340 steel with coated carbide tools
- (2013) Sunday Albert Lawal et al. JOURNAL OF CLEANER PRODUCTION
- Spent metal working fluids produced alterations on photosynthetic parameters and cell-ultrastructure of leaves and roots of maize plants
- (2013) Lucía Grijalbo et al. JOURNAL OF HAZARDOUS MATERIALS
- The effect of a surface-active medium on the mechanical stability and damageability of a solid surface. Review
- (2013) E. D. Shchukin et al. Protection of Metals and Physical Chemistry of Surfaces
- Developments in the formulation and application of vegetable oil-based metalworking fluids in turning process
- (2012) S. A. Lawal et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids
- (2012) A. Shokrani et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Low cost adsorbents for the removal of organic pollutants from wastewater
- (2012) Imran Ali et al. JOURNAL OF ENVIRONMENTAL MANAGEMENT
- Tribological properties of crown-type phosphate ionic liquids as lubricating additives in rapeseed oils
- (2012) Dong Jiang et al. Lubrication Science
- Nano-Cutting Fluid for Enhancement of Metal Cutting Performance
- (2012) S. Khandekar et al. MATERIALS AND MANUFACTURING PROCESSES
- Non-edible vegetable oils: A critical evaluation of oil extraction, fatty acid compositions, biodiesel production, characteristics, engine performance and emissions production
- (2012) A.E. Atabani et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Application of vegetable oil-based metalworking fluids in machining ferrous metals—A review
- (2011) S.A. Lawal et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Exposure to metal-working fluids in the automobile industry and the risk of male germ cell tumours: Table 1
- (2011) Thomas Behrens et al. OCCUPATIONAL AND ENVIRONMENTAL MEDICINE
- An empirical model for predicting energy consumption of manufacturing processes: a case of turning process
- (2011) W Li et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Experimental investigations of vegetable based cutting fluids with extreme pressure during turning of AISI 304L
- (2011) Babur Ozcelik et al. TRIBOLOGY INTERNATIONAL
- Environmentally benign tribo-systems for metal forming
- (2010) N. Bay et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Vegetable oil-based polymeric materials: synthesis, properties, and applications
- (2010) Ying Xia et al. GREEN CHEMISTRY
- Evaluation of Bacterial Contamination and Control Methods in Soluble Metalworking Fluids
- (2010) Geneviève Marchand et al. JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE
- Tribological properties of additives for water-based lubricants
- (2010) A. Tomala et al. WEAR
- Asthma, hypersensitivity pneumonitis and other respiratory diseases caused by metalworking fluids
- (2009) Kenneth D Rosenman Current Opinion in Allergy and Clinical Immunology
- Tool Wear Mechanism in Interrupted Cutting Conditions
- (2009) Ercan Sayit et al. MATERIALS AND MANUFACTURING PROCESSES
- Feasibility of edible oil vs. non-edible oil vs. waste edible oil as biodiesel feedstock
- (2008) M.M. Gui et al. ENERGY
- CuO, ZrO2 and ZnO nanoparticles as antiwear additive in oil lubricants
- (2008) A. Hernández Battez et al. WEAR
- Diffusion wear mechanism during high-speed machining of 7475-T7351 aluminum alloy with carbide end mills
- (2008) V.D. Calatoru et al. WEAR
- Substituted esters of stearic acid as potential lubricants
- (2007) A KLEINOVA et al. BIOMASS & BIOENERGY
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now