From Solidification Processing to Microstructure to Mechanical Properties: A Multi-scale X-ray Study of an Al-Cu Alloy Sample
出版年份 2017 全文链接
标题
From Solidification Processing to Microstructure to Mechanical Properties: A Multi-scale X-ray Study of an Al-Cu Alloy Sample
作者
关键词
-
出版物
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
Volume 48, Issue 11, Pages 5529-5546
出版商
Springer Nature
发表日期
2017-09-13
DOI
10.1007/s11661-017-4302-8
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Columnar and Equiaxed Solidification of Al-7 wt.% Si Alloys in Reduced Gravity in the Framework of the CETSOL Project
- (2017) G. Zimmermann et al. JOM
- Instantiation of crystal plasticity simulations for micromechanical modelling with direct input from microstructural data collected at light sources
- (2017) Reeju Pokharel et al. SCRIPTA MATERIALIA
- Fast synchrotron X-ray tomographic quantification of dendrite evolution during the solidification of Mg Sn alloys
- (2016) Sansan Shuai et al. ACTA MATERIALIA
- Time-resolved synchrotron tomographic quantification of deformation during indentation of an equiaxed semi-solid granular alloy
- (2016) B. Cai et al. ACTA MATERIALIA
- Three-dimensional dendritic needle network model for alloy solidification
- (2016) D. Tourret et al. ACTA MATERIALIA
- Microstructural effects on damage evolution in shocked copper polycrystals
- (2016) Evan J. Lieberman et al. ACTA MATERIALIA
- 4D synchrotron X-ray tomographic quantification of the transition from cellular to dendrite growth during directional solidification
- (2016) B. Cai et al. ACTA MATERIALIA
- Atomistic to continuum modeling of solidification microstructures
- (2016) Alain Karma et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- Modeling and characterization of grain structures and defects in solidification
- (2016) M. Rappaz CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- 20 Hz X-ray tomography during an in situ tensile test
- (2016) Eric Maire et al. INTERNATIONAL JOURNAL OF FRACTURE
- Study of Hot Tearing During Steel Solidification Through Ingot Punching Test and Its Numerical Simulation
- (2016) Takao Koshikawa et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- X-ray Imaging and Controlled Solidification of Al-Cu Alloys Toward Microstructures by Design
- (2015) Amy J. Clarke et al. ADVANCED ENGINEERING MATERIALS
- An integrated fast Fourier transform-based phase-field and crystal plasticity approach to model recrystallization of three dimensional polycrystals
- (2015) L. Chen et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- In-situ observation of bulk 3D grain evolution during plastic deformation in polycrystalline Cu
- (2015) Reeju Pokharel et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Three-Dimensional Multiscale Modeling of Dendritic Spacing Selection During Al-Si Directional Solidification
- (2015) Damien Tourret et al. JOM
- In Situ X-Ray Observations of Dendritic Fragmentation During Directional Solidification of a Sn-Bi Alloy
- (2015) John W. Gibbs et al. JOM
- Calculation of grain boundary normals directly from 3D microstructure images
- (2015) E J Lieberman et al. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Transgranular liquation cracking of grains in the semi-solid state
- (2015) S. Karagadde et al. Nature Communications
- The Three-Dimensional Morphology of Growing Dendrites
- (2015) J. W. Gibbs et al. Scientific Reports
- 3-D microstructural model of freckle formation validated using in situ experiments
- (2014) S. Karagadde et al. ACTA MATERIALIA
- In situ quantification of the nucleation and growth of Fe-rich intermetallics during Al alloy solidification
- (2014) C. Puncreobutr et al. ACTA MATERIALIA
- In situ synchrotron tomographic quantification of granular and intragranular deformation during semi-solid compression of an equiaxed dendritic Al–Cu alloy
- (2014) B. Cai et al. ACTA MATERIALIA
- Length-scale dependent mechanical properties of Al-Cu eutectic alloy: Molecular dynamics based model and its experimental verification
- (2014) C. S. Tiwary et al. JOURNAL OF APPLIED PHYSICS
- Additive manufactured porous titanium structures: Through-process quantification of pore and strut networks
- (2014) Taek Bo Kim et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- In situ microtensile testing and X-ray microtomography-based finite element modelling of open-cell metal foam struts and sandwich panels
- (2014) Charles Betts et al. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
- Laboratory micro- and nanoscale X-ray tomographic investigation of Al–7 at.%Cu solidification structures
- (2014) B.M. Patterson et al. MATERIALS CHARACTERIZATION
- Polycrystal Plasticity: Comparison Between Grain - Scale Observations of Deformation and Simulations
- (2014) Reeju Pokharel et al. Annual Review of Condensed Matter Physics
- Revealing the micromechanisms behind semi-solid metal deformation with time-resolved X-ray tomography
- (2014) K. M. Kareh et al. Nature Communications
- Multiscale dendritic needle network model of alloy solidification
- (2013) D. Tourret et al. ACTA MATERIALIA
- 3-D granular modeling and in situ X-ray tomographic imaging: A comparative study of hot tearing formation and semi-solid deformation in Al–Cu alloys
- (2013) M. Sistaninia et al. ACTA MATERIALIA
- Coupling in situ synchrotron X-ray tomographic microscopy and numerical simulation to quantify the influence of intermetallic formation on permeability in aluminium–silicon–copper alloys
- (2013) C. Puncreobutr et al. ACTA MATERIALIA
- Local Tomography Study of the Fracture of an ERG Metal Foam
- (2013) Tao Zhang et al. ADVANCED ENGINEERING MATERIALS
- Synchrotron X-ray imaging for crystal growth studies
- (2013) José Baruchel et al. COMPTES RENDUS PHYSIQUE
- Quantitative X-ray tomography
- (2013) E. Maire et al. INTERNATIONAL MATERIALS REVIEWS
- On the interest of synchrotron X-ray imaging for the study of solidification in metallic alloys
- (2012) Henri Nguyen-Thi et al. COMPTES RENDUS PHYSIQUE
- Fast In Situ X-Ray Microtomography Observations of Solidification and Semisolid Deformation of Al-Cu Alloys
- (2012) Michel Suéry et al. JOM
- Ductile damage in aluminium alloy thin sheets: Correlation between micro-tomography observations and mechanical modeling
- (2012) S. Thuillier et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Synchrotron Tomographic Characterization of Damage Evolution During Aluminum Alloy Solidification
- (2012) Chedtha Puncreobutr et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Structural, elastic and electronic properties of θ (Al2Cu) and S (Al2CuMg) strengthening precipitates in Al–Cu–Mg series alloys: First-principles calculations
- (2012) J. Zhang et al. SOLID STATE COMMUNICATIONS
- Analysis by synchrotron X-ray radiography of convection effects on the dynamic evolution of the solid–liquid interface and on solute distribution during the initial transient of solidification
- (2011) A. Bogno et al. ACTA MATERIALIA
- 3D imaging in material science: Application of X-ray tomography
- (2011) Luc Salvo et al. COMPTES RENDUS PHYSIQUE
- Damage quantification in aluminium alloys using in situ tensile tests in X-ray tomography
- (2011) Eric Maire et al. ENGINEERING FRACTURE MECHANICS
- An elasto-viscoplastic formulation based on fast Fourier transforms for the prediction of micromechanical fields in polycrystalline materials
- (2011) Ricardo A. Lebensohn et al. INTERNATIONAL JOURNAL OF PLASTICITY
- High-energy diffraction microscopy at the advanced photon source
- (2011) U. Lienert et al. JOM
- Far-field high-energy diffraction microscopy: a tool for intergranular orientation and strain analysis
- (2011) J V Bernier et al. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
- Grain-resolved elastic strains in deformed copper measured by three-dimensional X-ray diffraction
- (2011) Jette Oddershede et al. MATERIALS CHARACTERIZATION
- In Situ Experiments with X ray Tomography: an Attractive Tool for Experimental Mechanics
- (2010) J. -Y. Buffiere et al. EXPERIMENTAL MECHANICS
- In situ analysis of the influence of convection during the initial transient of planar solidification
- (2010) A. Bogno et al. JOURNAL OF CRYSTAL GROWTH
- In situ and real-time 3-D microtomography investigation of dendritic solidification in an Al–10wt.% Cu alloy
- (2009) N. Limodin et al. ACTA MATERIALIA
- Three dimensional experimental and numerical multiscale analysis of a fatigue crack
- (2009) Johann Rannou et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Micro- and nanoscale tensile testing of materials
- (2009) D. S. Gianola et al. JOM
- Influence of specimen dimensions and strain measurement methods on tensile stress–strain curves
- (2009) Y.H. Zhao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Micro-compression testing: A critical discussion of experimental constraints
- (2009) D. Kiener et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- In situ X-ray tomography observation of inhomogeneous deformation in semi-solid aluminium alloys
- (2009) S. Terzi et al. SCRIPTA MATERIALIA
- Solidification microstructures and solid-state parallels: Recent developments, future directions
- (2008) M. Asta et al. ACTA MATERIALIA
- Recent advances in X-ray microtomography applied to materials
- (2008) S. R. Stock INTERNATIONAL MATERIALS REVIEWS
- X-ray diffraction contrast tomography: a novel technique for three-dimensional grain mapping of polycrystals. II. The combined case
- (2008) Greg Johnson et al. JOURNAL OF APPLIED CRYSTALLOGRAPHY
- Quantitative Assessment of Deformation-Induced Damage in a Semisolid Aluminum Alloy via X-ray Microtomography
- (2008) A.B. Phillion et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- In-Situ and Real-Time Analysis of the Formation of Strains and Microstructure Defects during Solidification of Al-3.5 Wt Pct Ni Alloys
- (2008) G. Reinhart et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now