Interfacial Materials for Organic Solar Cells: Recent Advances and Perspectives
Published 2016 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Interfacial Materials for Organic Solar Cells: Recent Advances and Perspectives
Authors
Keywords
-
Journal
Advanced Science
Volume 3, Issue 8, Pages 1500362
Publisher
Wiley
Online
2016-02-19
DOI
10.1002/advs.201500362
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Facile Preparation of Molybdenum Bronzes as an Efficient Hole Extraction Layer in Organic Photovoltaics
- (2015) Jiantai Wang et al. ACS Applied Materials & Interfaces
- Enhancing Mechanical Properties of Highly Efficient Polymer Solar Cells Using Size-Tuned Polymer Nanoparticles
- (2015) Dong Jin Kang et al. ACS Applied Materials & Interfaces
- Simple O2 Plasma-Processed V2O5 as an Anode Buffer Layer for High-Performance Polymer Solar Cells
- (2015) Xichang Bao et al. ACS Applied Materials & Interfaces
- Improving the Conductivity of PEDOT:PSS Hole Transport Layer in Polymer Solar Cells via Copper(II) Bromide Salt Doping
- (2015) Zhiqiang Zhao et al. ACS Applied Materials & Interfaces
- Single-Junction Polymer Solar Cells with Over 10% Efficiency by a Novel Two-Dimensional Donor–Acceptor Conjugated Copolymer
- (2015) Chang Liu et al. ACS Applied Materials & Interfaces
- Hybrid Organic/Inorganic Thin-Film Multijunction Solar Cells Exceeding 11% Power Conversion Efficiency
- (2015) Steffen Roland et al. ADVANCED MATERIALS
- Single-Junction Organic Solar Cells Based on a Novel Wide-Bandgap Polymer with Efficiency of 9.7%
- (2015) Lijun Huo et al. ADVANCED MATERIALS
- Post-treatment-Free Solution-Processed Non-stoichiometric NiOxNanoparticles for Efficient Hole-Transport Layers of Organic Optoelectronic Devices
- (2015) Fei Jiang et al. ADVANCED MATERIALS
- Polymer Homo-Tandem Solar Cells with Best Efficiency of 11.3%
- (2015) Huiqiong Zhou et al. ADVANCED MATERIALS
- Efficient organic solar cells using copper(I) iodide (CuI) hole transport layers
- (2015) Ying Peng et al. APPLIED PHYSICS LETTERS
- Stability of inverted organic solar cells with ZnO contact layers deposited from precursor solutions
- (2015) Bradley A. MacLeod et al. Energy & Environmental Science
- Au-doped single layer graphene nanoribbons for a record-high efficiency ITO-free tandem polymer solar cell
- (2015) Abd. Rashid bin Mohd Yusoff et al. Energy & Environmental Science
- Air-processed polymer tandem solar cells with power conversion efficiency exceeding 10%
- (2015) Ning Li et al. Energy & Environmental Science
- Solution-processable metal oxides/chelates as electrode buffer layers for efficient and stable polymer solar cells
- (2015) Fuzhi Wang et al. Energy & Environmental Science
- Fully printed organic tandem solar cells using solution-processed silver nanowires and opaque silver as charge collecting electrodes
- (2015) Fei Guo et al. Energy & Environmental Science
- Annealing-free highly crystalline solution-processed molecular metal oxides for efficient single-junction and tandem polymer solar cells
- (2015) Maria Vasilopoulou et al. Energy & Environmental Science
- Design of a versatile interconnecting layer for highly efficient series-connected polymer tandem solar cells
- (2015) Lijian Zuo et al. Energy & Environmental Science
- A high efficiency solution processed polymer inverted triple-junction solar cell exhibiting a power conversion efficiency of 11.83%
- (2015) Abd. Rashid bin Mohd Yusoff et al. Energy & Environmental Science
- Recent progress and perspective in solution-processed Interfacial materials for efficient and stable polymer and organometal perovskite solar cells
- (2015) Chu-Chen Chueh et al. Energy & Environmental Science
- Energy Level Tuning of Non-Fullerene Acceptors in Organic Solar Cells
- (2015) Kjell Cnops et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- Photoconductive Cathode Interlayer for Highly Efficient Inverted Polymer Solar Cells
- (2015) Li Nian et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- Old Metal Oxide Clusters in New Applications: Spontaneous Reduction of Keggin and Dawson Polyoxometalate Layers by a Metallic Electrode for Improving Efficiency in Organic Optoelectronics
- (2015) Maria Vasilopoulou et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- Plasmon enhanced organic devices utilizing highly ordered nanoimprinted gold nanodisks and nitrogen doped graphene
- (2015) Mohd Asri Mat Teridi et al. Nanoscale
- Efficient polymer solar cells employing a non-conjugated small-molecule electrolyte
- (2015) Xinhua Ouyang et al. Nature Photonics
- Single-junction polymer solar cells with high efficiency and photovoltage
- (2015) Zhicai He et al. Nature Photonics
- Exciton blocking and dissociation by a p -type anode buffer in small molecule bulk heterojunction organic photovoltaic with small ratio donor of phosphorescent material
- (2015) Juan Wang et al. ORGANIC ELECTRONICS
- Soluble carbon nanotubes/phthalocyanines transparent electrode and interconnection layers for flexible inverted polymer tandem solar cells
- (2015) M. Raïssi et al. ORGANIC ELECTRONICS
- Metal salt modified PEDOT:PSS as anode buffer layer and its effect on power conversion efficiency of organic solar cells
- (2015) Burak Kadem et al. ORGANIC ELECTRONICS
- Solution-processable polymeric solar cells: A review on materials, strategies and cell architectures to overcome 10%
- (2015) Ikerne Etxebarria et al. ORGANIC ELECTRONICS
- Application of a water-soluble metallophthalocyanine derivative as a cathode interlayer for the polymer solar cells
- (2015) Tao Jia et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Zinc oxide: Conjugated polymer nanocomposite as cathode buffer layer for solution processed inverted organic solar cells
- (2015) Na Wu et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Vertical phase separation of PSS in organic photovoltaics with a nickel oxide doped PEDOT: PSS interlayer
- (2015) Anil Kanwat et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- 10.5% efficient polymer and amorphous silicon hybrid tandem photovoltaic cell
- (2015) Jeehwan Kim et al. Nature Communications
- A generic concept to overcome bandgap limitations for designing highly efficient multi-junction photovoltaic cells
- (2015) Fei Guo et al. Nature Communications
- Efficient Vacuum-Deposited Tandem Organic Solar Cells with Fill Factors Higher Than Single-Junction Subcells
- (2015) Hyun-Sub Shim et al. Advanced Energy Materials
- Dual Functional Zwitterionic Fullerene Interlayer for Efficient Inverted Polymer Solar Cells
- (2015) Yao Liu et al. Advanced Energy Materials
- Polymer Solar Cells with Efficiency >10% Enabled via a Facile Solution-Processed Al-Doped ZnO Electron Transporting Layer
- (2015) Lethy Krishnan Jagadamma et al. Advanced Energy Materials
- Tin Oxide (SnOx) as Universal “Light-Soaking” Free Electron Extraction Material for Organic Solar Cells
- (2015) Sara Trost et al. Advanced Energy Materials
- A Universal Interface Layer Based on an Amine-Functionalized Fullerene Derivative with Dual Functionality for Efficient Solution Processed Organic and Perovskite Solar Cells
- (2015) Hamed Azimi et al. Advanced Energy Materials
- Carrier-Selectivity-Dependent Charge Recombination Dynamics in Organic Photovoltaic Cells with a Ferroelectric Blend Interlayer
- (2015) Sae Byeok Jo et al. Advanced Energy Materials
- 10.4% Power Conversion Efficiency of ITO-Free Organic Photovoltaics Through Enhanced Light Trapping Configuration
- (2015) Jiang Huang et al. Advanced Energy Materials
- An anode buffer layer with size-controlled Ag nanoparticles for polymer solar cells with improved efficiencies
- (2015) Dhanavel Ganeshan et al. RSC Advances
- Efficiency exceeding 10% for inverted polymer solar cells with a ZnO/ionic liquid combined cathode interfacial layer
- (2015) W. Yu et al. Journal of Materials Chemistry A
- Improved performance of organic solar cells by incorporating silica-coated silver nanoparticles in the buffer layer
- (2015) Yang Hao et al. Journal of Materials Chemistry C
- MoOx and V2Ox as hole and electron transport layers through functionalized intercalation in normal and inverted organic optoelectronic devices
- (2015) Xinchen Li et al. Light-Science & Applications
- Efficiency improved for inverted polymer solar cells with electrostatically self-assembled BenMeIm-Cl ionic liquid layer as cathode interface layer
- (2015) Ping Fu et al. Nano Energy
- Perovskite/polymer monolithic hybrid tandem solar cells utilizing a low-temperature, full solution process
- (2015) Chun-Chao Chen et al. Materials Horizons
- Roll-Coated Fabrication of Fullerene-Free Organic Solar Cells with Improved Stability
- (2015) Pei Cheng et al. Advanced Science
- Morphology Evolution in High-Performance Polymer Solar Cells Processed from Nonhalogenated Solvent
- (2015) Wanzhu Cai et al. Advanced Science
- Low Temperature Aqueous Electrodeposited TiOx Thin Films as Electron Extraction Layer for Efficient Inverted Organic Solar Cells
- (2014) Kim Hai Wong et al. ACS Applied Materials & Interfaces
- High-Performance Inverted Solar Cells Based on Blend Films of ZnO Naoparticles and TiO2 Nanorods as a Cathode Buffer Layer
- (2014) Pandeng Li et al. ACS Applied Materials & Interfaces
- Disodium Edetate As a Promising Interfacial Material for Inverted Organic Solar Cells and the Device Performance Optimization
- (2014) Xiaodong Li et al. ACS Applied Materials & Interfaces
- Finding the Lost Open-Circuit Voltage in Polymer Solar Cells by UV-Ozone Treatment of the Nickel Acetate Anode Buffer Layer
- (2014) Fuzhi Wang et al. ACS Applied Materials & Interfaces
- Plasmonic Organic Solar Cells Employing Nanobump Assembly via Aerosol-Derived Nanoparticles
- (2014) Kinam Jung et al. ACS Nano
- Au@Ag Core–Shell Nanocubes for Efficient Plasmonic Light Scattering Effect in Low Bandgap Organic Solar Cells
- (2014) Se-Woong Baek et al. ACS Nano
- Lending Triarylphosphine Oxide to Phenanthroline: a Facile Approach to High-Performance Organic Small-Molecule Cathode Interfacial Material for Organic Photovoltaics utilizing Air-Stable Cathodes
- (2014) Wan-Yi Tan et al. ADVANCED FUNCTIONAL MATERIALS
- Over 1.1 eV Workfunction Tuning of Cesium Intercalated Metal Oxides for Functioning as Both Electron and Hole Transport Layers in Organic Optoelectronic Devices
- (2014) Xinchen Li et al. ADVANCED FUNCTIONAL MATERIALS
- Structure Tuning of Crown Ether Grafted Conjugated Polymers as the Electron Transport Layer in Bulk-Heterojunction Polymer Solar Cells for High Performance
- (2014) Yi-Lun Li et al. ADVANCED FUNCTIONAL MATERIALS
- Chemically Controlled Reversible and Irreversible Extraction Barriers Via Stable Interface Modification of Zinc Oxide Electron Collection Layer in Polycarbazole-based Organic Solar Cells
- (2014) Sarah R. Cowan et al. ADVANCED FUNCTIONAL MATERIALS
- An Efficient Triple-Junction Polymer Solar Cell Having a Power Conversion Efficiency Exceeding 11%
- (2014) Chun-Chao Chen et al. ADVANCED MATERIALS
- Simplified Tandem Polymer Solar Cells with an Ideal Self-Organized Recombination Layer
- (2014) Hongkyu Kang et al. ADVANCED MATERIALS
- Highly Efficient Tandem Polymer Solar Cells with a Photovoltaic Response in the Visible Light Range
- (2014) Zhong Zheng et al. ADVANCED MATERIALS
- Suppressed Charge Recombination in Inverted Organic Photovoltaics via Enhanced Charge Extraction by Using a Conductive Fullerene Electron Transport Layer
- (2014) Chang-Zhi Li et al. ADVANCED MATERIALS
- Single-Junction Polymer Solar Cells Exceeding 10% Power Conversion Efficiency
- (2014) Jing-De Chen et al. ADVANCED MATERIALS
- An Organic Surface Modifier to Produce a High Work Function Transparent Electrode for High Performance Polymer Solar Cells
- (2014) Hyosung Choi et al. ADVANCED MATERIALS
- A water-processable organic electron-selective layer for solution-processed inverted organic solar cells
- (2014) Dongcheng Chen et al. APPLIED PHYSICS LETTERS
- The action mechanism of TiO2:NaYF4:Yb3+,Tm3+ cathode buffer layer in highly efficient inverted organic solar cells
- (2014) Chunyu Liu et al. APPLIED PHYSICS LETTERS
- A nanocomposite interconnecting layer for tandem small molecular organic photovoltaic cells
- (2014) D. Y. Luo et al. APPLIED PHYSICS LETTERS
- Highly efficient inverted organic solar cells using amino acid modified indium tin oxide as cathode
- (2014) Aiyuan Li et al. APPLIED PHYSICS LETTERS
- MoO3/Ag/Al/ZnO intermediate layer for inverted tandem polymer solar cells
- (2014) Jian Qing et al. Chinese Physics B
- Perylene diimides: a thickness-insensitive cathode interlayer for high performance polymer solar cells
- (2014) Zhi-Guo Zhang et al. Energy & Environmental Science
- Effect of π-conjugated bridges of TPD-based medium bandgap conjugated copolymers for efficient tandem organic photovoltaic cells
- (2014) Ji-Hoon Kim et al. Energy & Environmental Science
- Flexible organic tandem solar modules with 6% efficiency: combining roll-to-roll compatible processing with high geometric fill factors
- (2014) G. D. Spyropoulos et al. Energy & Environmental Science
- Solution-Processed Copper Iodide as an Inexpensive and Effective Anode Buffer Layer for Polymer Solar Cells
- (2014) Weihai Sun et al. Journal of Physical Chemistry C
- Solution-Processed and Low-Temperature Annealed CrOx as Anode Buffer Layer for Efficient Polymer Solar Cells
- (2014) Xiaohe Tu et al. Journal of Physical Chemistry C
- Universal and Versatile MoO3-Based Hole Transport Layers for Efficient and Stable Polymer Solar Cells
- (2014) Xiaotian Hu et al. Journal of Physical Chemistry C
- Graphene Oxide-Based Carbon Interconnecting Layer for Polymer Tandem Solar Cells
- (2014) Yonghua Chen et al. NANO LETTERS
- Solution-derived poly(ethylene glycol)-TiO x nanocomposite film as a universal cathode buffer layer for enhancing efficiency and stability of polymer solar cells
- (2014) Zhigang Yin et al. Nano Research
- Dye-sensitized solar cells with 13% efficiency achieved through the molecular engineering of porphyrin sensitizers
- (2014) Simon Mathew et al. Nature Chemistry
- Improved performance and stability in quantum dot solar cells through band alignment engineering
- (2014) Chia-Hao M. Chuang et al. NATURE MATERIALS
- Effect of different p-dopants in an interconnection unit on the performance of tandem organic solar cells
- (2014) Hyun-Sub Shim et al. ORGANIC ELECTRONICS
- Novel cathode buffer layer of Ag-doped bathocuproine for small molecule organic solar cell with inverted structure
- (2014) Xia Hao et al. ORGANIC ELECTRONICS
- Vacuum-deposited interconnection layers for tandem solar cells
- (2014) Yi-Hong Chen et al. ORGANIC ELECTRONICS
- Enhanced efficiency and stability of polymer solar cells with TiO2 nanoparticles buffer layer
- (2014) Jian Xiong et al. ORGANIC ELECTRONICS
- Enhancing the short-circuit current, efficiency of inverted organic solar cells using tetra sulfonic copper phthalocyanine (TS-CuPc) as electron transporting layer
- (2014) M. Raïssi et al. ORGANIC ELECTRONICS
- Highly efficient organic tandem solar cell based on SubPc:C 70 bulk heterojunction
- (2014) Fangming Jin et al. ORGANIC ELECTRONICS
- The use of UV/ozone-treated MoS2 nanosheets for extended air stability in organic photovoltaic cells
- (2014) Quyet Van Le et al. PHYSICAL CHEMISTRY CHEMICAL PHYSICS
- Fulleropyrrolidine interlayers: Tailoring electrodes to raise organic solar cell efficiency
- (2014) Zachariah A. Page et al. SCIENCE
- Exfoliated and Partially Oxidized MoS2Nanosheets by One-Pot Reaction for Efficient and Stable Organic Solar Cells
- (2014) Jin-Mun Yun et al. Small
- Enhanced efficiency in organic solar cells via in situ fabricated p-type copper sulfide as the hole transporting layer
- (2014) Hongwei Lei et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Inverted organic solar cells based on Cd-doped TiO2 as an electron extraction layer
- (2014) A. Ranjitha et al. SUPERLATTICES AND MICROSTRUCTURES
- Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
- (2014) Yuhang Liu et al. Nature Communications
- 8.4% efficient fullerene-free organic solar cells exploiting long-range exciton energy transfer
- (2014) Kjell Cnops et al. Nature Communications
- Improved Performance in Bulk Heterojunction Organic Solar Cells with a Sol-Gel MgZnO Electron-Collecting Layer
- (2014) Bradley A. MacLeod et al. Advanced Energy Materials
- Efficient Charge Extraction in Thick Bulk Heterojunction Solar Cells through Infiltrated Diffusion Doping
- (2014) Junghwan Kim et al. Advanced Energy Materials
- ITO Breakers: Highly Transparent Conducting Polymer/Metal/Dielectric (P/M/D) Films for Organic Solar Cells
- (2014) Juyoung Ham et al. Advanced Energy Materials
- High-Efficiency Inverted Polymer Photovoltaics via Spectrally Tuned Absorption Enhancement
- (2014) Stephen Loser et al. Advanced Energy Materials
- Contact Doping with Sub-Monolayers of Strong Polyelectrolytes for Organic Photovoltaics
- (2014) Gopal K. Mor et al. Advanced Energy Materials
- Decreased Recombination Through the Use of a Non-Fullerene Acceptor in a 6.4% Efficient Organic Planar Heterojunction Solar Cell
- (2014) Bregt Verreet et al. Advanced Energy Materials
- High-Performance Semitransparent Tandem Solar Cell of 8.02% Conversion Efficiency with Solution-Processed Graphene Mesh and Laminated Ag Nanowire Top Electrodes
- (2014) Abd. Rashid bin Mohd Yusoff et al. Advanced Energy Materials
- Inverted Tandem Polymer Solar Cells with Polyethylenimine-Modified MoOX/Al2O3:ZnO Nanolaminate as the Charge Recombination Layers
- (2014) Jae Won Shim et al. Advanced Energy Materials
- An Alternative Hole Transport Layer for Both ITO- and Graphene-Based Organic Solar Cells
- (2014) Hyesung Park et al. Advanced Energy Materials
- Improving Cathodes with a Polymer Interlayer in Reversed Organic Solar Cells
- (2014) Zheng Tang et al. Advanced Energy Materials
- Atomic-Layer-Deposited Aluminum and Zirconium Oxides for Surface Passivation of TiO2in High-Efficiency Organic Photovoltaics
- (2014) Maria Vasilopoulou et al. Advanced Energy Materials
- High-Efficiency Organic Photovoltaic Cells Based on the Solution-Processable Hole Transporting Interlayer Copper Thiocyanate (CuSCN) as a Replacement for PEDOT:PSS
- (2014) Nir Yaacobi-Gross et al. Advanced Energy Materials
- Environmentally Printing Efficient Organic Tandem Solar Cells with High Fill Factors: A Guideline Towards 20% Power Conversion Efficiency
- (2014) Ning Li et al. Advanced Energy Materials
- Morphological Control for Highly Efficient Inverted Polymer Solar Cells Via the Backbone Design of Cathode Interlayer Materials
- (2014) Wenjun Zhang et al. Advanced Energy Materials
- Work-Function-Tunable Chlorinated Graphene Oxide as an Anode Interface Layer in High-Efficiency Polymer Solar Cells
- (2014) Dong Yang et al. Advanced Energy Materials
- Broad Work-Function Tunability of p-Type Conjugated Polyelectrolytes for Efficient Organic Solar Cells
- (2014) Byoung Hoon Lee et al. Advanced Energy Materials
- Bandgap Tunable Zn1-xMgxO Thin Films as Highly Transparent Cathode Buffer Layers for High-Performance Inverted Polymer Solar Cells
- (2014) Zhigang Yin et al. Advanced Energy Materials
- High-Performance Inverted Organic Photovoltaics with Over 1-μm Thick Active Layers
- (2014) Xiaowen Hu et al. Advanced Energy Materials
- A General Route to Enhance Polymer Solar Cell Performance using Plasmonic Nanoprisms
- (2014) Kai Yao et al. Advanced Energy Materials
- Interplay of Optical, Morphological, and Electronic Effects of ZnO Optical Spacers in Highly Efficient Polymer Solar Cells
- (2014) Sadok Ben Dkhil et al. Advanced Energy Materials
- Interface Design to Improve the Performance and Stability of Solution-Processed Small-Molecule Conventional Solar Cells
- (2014) Jie Min et al. Advanced Energy Materials
- High-Efficiency, Vacuum-Deposited, Small-Molecule Organic Tandem and Triple-Junction Photovoltaic Cells
- (2014) Xiaozhou Che et al. Advanced Energy Materials
- 8.9% Single-Stack Inverted Polymer Solar Cells with Electron-Rich Polymer Nanolayer-Modified Inorganic Electron-Collecting Buffer Layers
- (2014) Sungho Woo et al. Advanced Energy Materials
- Overcoming the Light-Soaking Problem in Inverted Polymer Solar Cells by Introducing a Heavily Doped Titanium Sub-Oxide Functional Layer
- (2014) Geunjin Kim et al. Advanced Energy Materials
- Role of additional PCBM layer between ZnO and photoactive layers in inverted bulk-heterojunction solar cells
- (2014) Shinuk Cho et al. Scientific Reports
- High performance polymer solar cells with as-prepared zirconium acetylacetonate film as cathode buffer layer
- (2014) Zhan'ao Tan et al. Scientific Reports
- Ultrathin Polyaniline-based Buffer Layer for Highly Efficient Polymer Solar Cells with Wide Applicability
- (2014) Wenchao Zhao et al. Scientific Reports
- Single Junction Inverted Polymer Solar Cell Reaching Power Conversion Efficiency 10.31% by Employing Dual-Doped Zinc Oxide Nano-Film as Cathode Interlayer
- (2014) Sih-Hao Liao et al. Scientific Reports
- Interface Modification of ZnO-Based Inverted PTB7:PC71BM Organic Solar Cells by Cesium Stearate and Simultaneous Enhancement of Device Parameters
- (2014) Guojie Wang et al. ACS Sustainable Chemistry & Engineering
- Environmentally friendly biomaterials as an interfacial layer for highly efficient and air-stable inverted organic solar cells
- (2014) Riming Nie et al. Journal of Materials Chemistry A
- A universal method to form the equivalent ohmic contact for efficient solution-processed organic tandem solar cells
- (2014) Ning Li et al. Journal of Materials Chemistry A
- Efficient and stable polymer solar cells with annealing-free solution-processible NiO nanoparticles as anode buffer layers
- (2014) Jun Zhang et al. Journal of Materials Chemistry C
- Flexible silver grid/PEDOT:PSS hybrid electrodes for large area inverted polymer solar cells
- (2014) Lin Mao et al. Nano Energy
- The effect of SrTiO3:ZnO as cathodic buffer layer for inverted polymer solar cells
- (2014) Jo-Lin Lan et al. Nano Energy
- Inverted organic photovoltaic device with a new electron transport layer
- (2014) Hyeong Kim et al. Nanoscale Research Letters
- Origin of Work Function Modification by Ionic and Amine-Based Interface Layers
- (2014) Stephan van Reenen et al. Advanced Materials Interfaces
- High-Volume Processed, ITO-Free Superstrates and Substrates for Roll-to-Roll Development of Organic Electronics
- (2014) Markus Hösel et al. Advanced Science
- Kelvin Probe Force Microscopic Imaging of the Energy Barrier and Energetically Favorable Offset of Interfaces in Double-Junction Organic Solar Cells
- (2013) Mahbube K. Siddiki et al. ACS Applied Materials & Interfaces
- Solution-Processed Fe3O4 Magnetic Nanoparticle Thin Film Aligned by an External Magnetostatic Field as a Hole Extraction Layer for Polymer Solar Cells
- (2013) Kai Wang et al. ACS Applied Materials & Interfaces
- Carrier Lifetime Extension via the Incorporation of Robust Hole/Electron Blocking Layers in Bulk Heterojunction Polymer Solar Cells
- (2013) Youngwoon Yoon et al. ACS Applied Materials & Interfaces
- Solution Processed ZnO Hybrid Nanocomposite with Tailored Work Function for Improved Electron Transport Layer in Organic Photovoltaic Devices
- (2013) Yun-Ju Lee et al. ACS Applied Materials & Interfaces
- Solution-Processed Nanocomposites Containing Molybdenum Oxide and Gold Nanoparticles as Anode Buffer Layers in Plasmonic-Enhanced Organic Photovoltaic Devices
- (2013) Kim-Shih Tan et al. ACS Applied Materials & Interfaces
- Interface Control of Semiconducting Metal Oxide Layers for Efficient and Stable Inverted Polymer Solar Cells with Open-Circuit Voltages over 1.0 Volt
- (2013) Zhigang Yin et al. ACS Applied Materials & Interfaces
- Solution-Processed MoSxas an Efficient Anode Buffer Layer in Organic Solar Cells
- (2013) Xiaodong Li et al. ACS Applied Materials & Interfaces
- Development of Inverted Organic Solar Cells with TiO2 Interface Layer by Using Low-Temperature Atomic Layer Deposition
- (2013) Zhenhua Lin et al. ACS Applied Materials & Interfaces
- Highly Efficient Organic Photovoltaics via Incorporation of Solution-Processed Cesium Stearate as the Cathode Interfacial Layer
- (2013) Guojie Wang et al. ACS Applied Materials & Interfaces
- Improving Efficiency by Hybrid TiO2 Nanorods with 1,10-Phenanthroline as A Cathode Buffer Layer for Inverted Organic Solar Cells
- (2013) Chunming Sun et al. ACS Applied Materials & Interfaces
- Cesium Carbonate Functionalized Graphene Quantum Dots as Stable Electron-Selective Layer for Improvement of Inverted Polymer Solar Cells
- (2013) Hong Bin Yang et al. ACS Applied Materials & Interfaces
- Noncovalent Functionalization of Graphene Attaching [6,6]-Phenyl-C61-butyric Acid Methyl Ester (PCBM) and Application as Electron Extraction Layer of Polymer Solar Cells
- (2013) Shuxuan Qu et al. ACS Nano
- Highly Efficient Inverted Organic Solar Cells Through Material and Interfacial Engineering of Indacenodithieno[3,2-b]thiophene-Based Polymers and Devices
- (2013) Jeremy J. Intemann et al. ADVANCED FUNCTIONAL MATERIALS
- Enhanced Charge-Carrier Injection and Collection Via Lamination of Doped Polymer Layers p-Doped with a Solution-Processible Molybdenum Complex
- (2013) An Dai et al. ADVANCED FUNCTIONAL MATERIALS
- Solution-Processed Nickel Oxide Hole Transport Layers in High Efficiency Polymer Photovoltaic Cells
- (2013) Jesse R. Manders et al. ADVANCED FUNCTIONAL MATERIALS
- 8.91% Power Conversion Efficiency for Polymer Tandem Solar Cells
- (2013) Abd. Rashid bin Mohd Yusoff et al. ADVANCED FUNCTIONAL MATERIALS
- A Versatile Fluoro-Containing Low-Bandgap Polymer for Efficient Semitransparent and Tandem Polymer Solar Cells
- (2013) Chih-Yu Chang et al. ADVANCED FUNCTIONAL MATERIALS
- Work Function Tuning for High-Performance Solution-Processed Organic Photodetectors with Inverted Structure
- (2013) Emeline Saracco et al. ADVANCED MATERIALS
- 10.2% Power Conversion Efficiency Polymer Tandem Solar Cells Consisting of Two Identical Sub-Cells
- (2013) Jingbi You et al. ADVANCED MATERIALS
- Low-Temperature Solution-Processed Hydrogen Molybdenum and Vanadium Bronzes for an Efficient Hole-Transport Layer in Organic Electronics
- (2013) Fengxian Xie et al. ADVANCED MATERIALS
- Amine-Based Polar Solvent Treatment for Highly Efficient Inverted Polymer Solar Cells
- (2013) Bo Ram Lee et al. ADVANCED MATERIALS
- Efficient Solution-Processed Small-Molecule Solar Cells with Inverted Structure
- (2013) Aung Ko Ko Kyaw et al. ADVANCED MATERIALS
- Enhanced Efficiency of Single and Tandem Organic Solar Cells Incorporating a Diketopyrrolopyrrole-Based Low-Bandgap Polymer by Utilizing Combined ZnO/Polyelectrolyte Electron-Transport Layers
- (2013) Jang Jo et al. ADVANCED MATERIALS
- Recent Advances in Polymer Solar Cells: Realization of High Device Performance by Incorporating Water/Alcohol-Soluble Conjugated Polymers as Electrode Buffer Layer
- (2013) Zhicai He et al. ADVANCED MATERIALS
- Fullerene Derivative-Doped Zinc Oxide Nanofilm as the Cathode of Inverted Polymer Solar Cells with Low-Bandgap Polymer (PTB7-Th) for High Performance
- (2013) Sih-Hao Liao et al. ADVANCED MATERIALS
- Transferable Graphene Oxide by Stamping Nanotechnology: Electron-Transport Layer for Efficient Bulk-Heterojunction Solar Cells
- (2013) Dong Hwan Wang et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- Ligand chemistry of titania precursor affects transient photovoltaic behavior in inverted organic solar cells
- (2013) Jong Bok Kim et al. APPLIED PHYSICS LETTERS
- Highly efficient inverted polymer solar cells with reduced graphene-oxide-zinc-oxide nanocomposites buffer layer
- (2013) Hyun Woo Lee et al. APPLIED PHYSICS LETTERS
- Small molecule-based tandem solar cells with solution-processed and vacuum-processed photoactive layers
- (2013) Werther Cambarau et al. CHEMICAL COMMUNICATIONS
- Solution-processed amorphous niobium oxide as a novel electron collection layer for inverted polymer solar cells
- (2013) Keisuke Hamada et al. CHEMICAL PHYSICS LETTERS
- Nanoscale Dispersions of Gelled SnO2: Material Properties and Device Applications
- (2013) Brion Bob et al. CHEMISTRY OF MATERIALS
- Self-Organized Hole Transport Layers Based on Polythiophene Diblock Copolymers for Inverted Organic Solar Cells with High Efficiency
- (2013) Kai Yao et al. CHEMISTRY OF MATERIALS
- Thieno[3,2-b]thiophene-Substituted Benzo[1,2-b:4,5-b′]dithiophene as a Promising Building Block for Low Bandgap Semiconducting Polymers for High-Performance Single and Tandem Organic Photovoltaic Cells
- (2013) Ji-Hoon Kim et al. CHEMISTRY OF MATERIALS
- Efficient inverted organic solar cells using Zn-doped titanium oxide films as electron transport layers
- (2013) Shanshan Yuan et al. ELECTROCHIMICA ACTA
- Enhanced electron collection in inverted organic solar cells using titanium oxide/reduced graphene oxide composite films as electron collecting layers
- (2013) Yang Zhang et al. ELECTROCHIMICA ACTA
- Low-temperature, solution-processed, layered V2O5 hydrate as the hole-transport layer for stable organic solar cells
- (2013) Gerardo Terán-Escobar et al. Energy & Environmental Science
- Triple junction polymer solar cells
- (2013) Olusegun Adebanjo et al. Energy & Environmental Science
- Highly efficient organic tandem solar cells: a follow up review
- (2013) Tayebeh Ameri et al. Energy & Environmental Science
- In situ doping and crosslinking of fullerenes to form efficient and robust electron-transporting layers for polymer solar cells
- (2013) Namchul Cho et al. Energy & Environmental Science
- Graphene oxide derivatives as hole- and electron-extraction layers for high-performance polymer solar cells
- (2013) Jun Liu et al. Energy & Environmental Science
- Development of Large Band-Gap Conjugated Copolymers for Efficient Regular Single and Tandem Organic Solar Cells
- (2013) Kai Li et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- Efficient Tandem and Triple-Junction Polymer Solar Cells
- (2013) Weiwei Li et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- High-Efficiency Polymer Solar Cells via the Incorporation of an Amino-Functionalized Conjugated Metallopolymer as a Cathode Interlayer
- (2013) Shengjian Liu et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- Properties of interlayer for organic photovoltaics
- (2013) Tzung-Han Lai et al. Materials Today
- Extremely stable all solution processed organic tandem solar cells with TiO2/GO recombination layer under continuous light illumination
- (2013) Abd. Rashid bin Mohd Yusoff et al. Nanoscale
- Plasmonic organic photovoltaic devices with graphene based buffer layers for stability and efficiency enhancement
- (2013) Emmanuel Stratakis et al. Nanoscale
- Transparent flexible organic solar cells with 6.87% efficiency manufactured by an all-solution process
- (2013) Wilson Jose da Silva et al. Nanoscale
- Assembly and organization of poly(3-hexylthiophene) brushes and their potential use as novel anode buffer layers for organic photovoltaics
- (2013) José Alonzo et al. Nanoscale
- Gold nanoparticle-decorated graphene oxides for plasmonic-enhanced polymer photovoltaic devices
- (2013) Ming-Kai Chuang et al. Nanoscale
- Tuning indium tin oxide work function with solution-processed alkali carbonate interfacial layers for high-efficiency inverted organic photovoltaic cells
- (2013) Fei Chen et al. NANOTECHNOLOGY
- Low temperature, solution-processed alumina for organic solar cells
- (2013) Jun Peng et al. NANOTECHNOLOGY
- Efficient planar heterojunction perovskite solar cells by vapour deposition
- (2013) Mingzhen Liu et al. NATURE
- Device stability of inverted and conventional bulk heterojunction solar cells with MoO3 and ZnO nanoparticles as charge transport layers
- (2013) Souvik Kundu et al. ORGANIC ELECTRONICS
- MoO3–Au composite interfacial layer for high efficiency and air-stable organic solar cells
- (2013) Hongbin Pan et al. ORGANIC ELECTRONICS
- An X-ray fluorescence study on the segregation of Cs and I in an inverted organic solar cell
- (2013) William R. Lindemann et al. ORGANIC ELECTRONICS
- Power conversion efficiency enhancement of organic solar cells by addition of gold nanostars, nanorods, and nanospheres
- (2013) Duygu Kozanoglu et al. ORGANIC ELECTRONICS
- Improved power conversion efficiency by insertion of RGO–TiO2 composite layer as optical spacer in polymer bulk heterojunction solar cells
- (2013) G.D. Sharma et al. ORGANIC ELECTRONICS
- Growth of vertically aligned ZnO nanowalls for inverted polymer solar cells
- (2013) Zhiqiang Liang et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Organic solar cells using a reduced graphene oxide anode buffer layer
- (2013) Hyeong Pil Kim et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Improvement in power conversion efficiency and long-term lifetime of organic photovoltaic cells by using bathophenanthroline/molybdenum oxide as compound cathode buffer layer
- (2013) Fangming Jin et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Influences of dopant concentration in sol–gel derived AZO layer on the performance of P3HT:PCBM based inverted solar cell
- (2013) Annisa Aprilia et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Graphene quantum dots-incorporated cathode buffer for improvement of inverted polymer solar cells
- (2013) Hong Bin Yang et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- High-efficiency inverted tandem polymer solar cells with step-Al-doped MoO3 interconnection layer
- (2013) Jian Liu et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Solution-processable bismuth iodide nanosheets as hole transport layers for organic solar cells
- (2013) Karunakara Moorthy Boopathi et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Large active area inverted tandem polymer solar cell with high performance via insertion of subnano-scale silver layer
- (2013) Po-Nan Yeh et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Design of intermediate layers for solution-processed tandem organic solar cells: Guidelines from a case study on TiOx and ZnO
- (2013) Balthazar Lechêne et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Multi-wall carbon nanotube coating of fluorine-doped tin oxide as an electrode surface modifier for polymer solar cells
- (2013) A. Capasso et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Characteristics of a ZnTiO and ITO cathode-integrated electrodes for inverted organic solar cells
- (2013) Sin-Bi Kang et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- A polymer tandem solar cell with 10.6% power conversion efficiency
- (2013) Jingbi You et al. Nature Communications
- Improved Performance and Stability of Inverted Organic Solar Cells with Sol-Gel Processed, Amorphous Mixed Metal Oxide Electron Extraction Layers Comprising Alkaline Earth Metals
- (2013) Olympia Pachoumi et al. Advanced Energy Materials
- Solution-Processed Hydrogen Molybdenum Bronzes as Highly Conductive Anode Interlayers in Efficient Organic Photovoltaics
- (2013) Anastasia Soultati et al. Advanced Energy Materials
- Greatly Reduced Processing Temperature for a Solution-Processed NiOxBuffer Layer in Polymer Solar Cells
- (2013) Zhichun Zhai et al. Advanced Energy Materials
- Linking Vertical Bulk-Heterojunction Composition and Transient Photocurrent Dynamics in Organic Solar Cells with Solution-Processed MoOxContact Layers
- (2013) Bertrand J. Tremolet de Villers et al. Advanced Energy Materials
- Solution-Processed (Graphene Oxide)-(d0Transition Metal Oxide) Composite Anodic Buffer Layers toward High-Performance and Durable Inverted Polymer Solar Cells
- (2013) Yi-Hsiang Chao et al. Advanced Energy Materials
- Solution-Processed Rhenium Oxide: A Versatile Anode Buffer Layer for High Performance Polymer Solar Cells with Enhanced Light Harvest
- (2013) Zhan'ao Tan et al. Advanced Energy Materials
- Highly Efficient Polymer Tandem Cells and Semitransparent Cells for Solar Energy
- (2013) Chih-Yu Chang et al. Advanced Energy Materials
- A Solution-Processed Hole Extraction Layer Made from Ultrathin MoS2Nanosheets for Efficient Organic Solar Cells
- (2013) Xing Gu et al. Advanced Energy Materials
- A Depletion-Free, Ionic, Self-Assembled Recombination Layer for Tandem Polymer Solar Cells
- (2013) Jinho Lee et al. Advanced Energy Materials
- Enhanced Device Efficiency of Bilayered Inverted Organic Solar Cells Based on Photocurable P3HTs with a Light-Harvesting ZnO Nanorod Array
- (2013) Sehwan Kim et al. Advanced Energy Materials
- An Efficient Solution-Processed Intermediate Layer for Facilitating Fabrication of Organic Multi-Junction Solar Cells
- (2013) Ning Li et al. Advanced Energy Materials
- Low-Temperature Combustion-Synthesized Nickel Oxide Thin Films as Hole-Transport Interlayers for Solution-Processed Optoelectronic Devices
- (2013) Sai Bai et al. Advanced Energy Materials
- High quantity and quality few-layers transition metal disulfide nanosheets from wet-milling exfoliation
- (2013) Mohammed Aziz Ibrahem et al. RSC Advances
- Plasmonic Forward Scattering Effect in Organic Solar Cells: A Powerful Optical Engineering Method
- (2013) Se-Woong Baek et al. Scientific Reports
- Barium: An Efficient Cathode Layer for Bulk-heterojunction Solar Cells
- (2013) Vinay Gupta et al. Scientific Reports
- Solution-processed small-molecule solar cells: breaking the 10% power conversion efficiency
- (2013) Yongsheng Liu et al. Scientific Reports
- Overcoming interface losses in organic solar cells by applying low temperature, solution processed aluminum-doped zinc oxide electron extraction layers
- (2013) Tobias Stubhan et al. Journal of Materials Chemistry A
- New solution-processable small molecules as hole-transporting layer in efficient polymer solar cells
- (2013) Kunyuan Lu et al. Journal of Materials Chemistry A
- Pyridinium salt-based molecules as cathode interlayers for enhanced performance in polymer solar cells
- (2013) Hua Ye et al. Journal of Materials Chemistry A
- Amine group functionalized fullerene derivatives as cathode buffer layers for high performance polymer solar cells
- (2013) Zhi-Guo Zhang et al. Journal of Materials Chemistry A
- Significance of the ZnO nanorod array morphology for low-bandgap polymer solar cells in inverted structures
- (2013) Shao-Hsuan Kao et al. Journal of Materials Chemistry A
- Facile preparation of TiOXfilm as an interface material for efficient inverted polymer solar cells
- (2013) Xichang Bao et al. Journal of Materials Chemistry A
- Efficient polymer solar cells with a solution-processed and thermal annealing-free RuO2anode buffer layer
- (2013) Fuzhi Wang et al. Journal of Materials Chemistry A
- Room temperature solution processed tungsten carbide as an efficient hole extraction layer for organic photovoltaics
- (2013) Wei Cui et al. Journal of Materials Chemistry A
- In situ growth of double-layer MoO3/MoS2 film from MoS2 for hole-transport layers in organic solar cell
- (2013) Pingli Qin et al. Journal of Materials Chemistry A
- Hydrogenated under-stoichiometric tungsten oxide anode interlayers for efficient and stable organic photovoltaics
- (2013) M. Vasilopoulou et al. Journal of Materials Chemistry A
- High performance inverted organic solar cells with solution processed Ga-doped ZnO as an interfacial electron transport layer
- (2013) M. Thambidurai et al. Journal of Materials Chemistry C
- Surface plasmon enhancement of polymer solar cells by penetrating Au/SiO2 core/shell nanoparticles into all organic layers
- (2013) Boxue Chen et al. Nano Energy
- Molecular Design of Photovoltaic Materials for Polymer Solar Cells: Toward Suitable Electronic Energy Levels and Broad Absorption
- (2012) Yongfang Li ACCOUNTS OF CHEMICAL RESEARCH
- High-Efficiency Inverted Polymer Solar Cells with Double Interlayer
- (2012) Jegadesan Subbiah et al. ACS Applied Materials & Interfaces
- Highly Efficient, Inverted Polymer Solar Cells with Indium Tin Oxide Modified with Solution-Processed Zwitterions as the Transparent Cathode
- (2012) Kuan Sun et al. ACS Applied Materials & Interfaces
- Enhanced Performance of Inverted Polymer Solar Cells by Using Poly(ethylene oxide)-Modified ZnO as an Electron Transport Layer
- (2012) Shuyan Shao et al. ACS Applied Materials & Interfaces
- A Solution-Processed MoOx Anode Interlayer for Use within Organic Photovoltaic Devices
- (2012) Jacek J. Jasieniak et al. ADVANCED FUNCTIONAL MATERIALS
- Oriented Growth of Al2O3:ZnO Nanolaminates for Use as Electron-Selective Electrodes in Inverted Polymer Solar Cells
- (2012) Hyeunseok Cheun et al. ADVANCED FUNCTIONAL MATERIALS
- Effects of the Morphology of a ZnO Buffer Layer on the Photovoltaic Performance of Inverted Polymer Solar Cells
- (2012) Zhiqiang Liang et al. ADVANCED FUNCTIONAL MATERIALS
- High-Efficiency Inverted Polymer Solar Cells with Transparent and Work-Function Tunable MoO3-Al Composite Film as Cathode Buffer Layer
- (2012) Jian Liu et al. ADVANCED MATERIALS
- Hole and Electron Extraction Layers Based on Graphene Oxide Derivatives for High-Performance Bulk Heterojunction Solar Cells
- (2012) Jun Liu et al. ADVANCED MATERIALS
- High Efficiency Inorganic/Organic Hybrid Tandem Solar Cells
- (2012) Ji Hoon Seo et al. ADVANCED MATERIALS
- Electrostatically Self-Assembled Nonconjugated Polyelectrolytes as an Ideal Interfacial Layer for Inverted Polymer Solar Cells
- (2012) Hongkyu Kang et al. ADVANCED MATERIALS
- High-Performance Inverted Polymer Solar Cells with Solution-Processed Titanium Chelate as Electron-Collecting Layer on ITO Electrode
- (2012) Zhan'ao Tan et al. ADVANCED MATERIALS
- Dual Plasmonic Nanostructures for High Performance Inverted Organic Solar Cells
- (2012) Xuanhua Li et al. ADVANCED MATERIALS
- Metal Oxide Nanoparticles as an Electron-Transport Layer in High-Performance and Stable Inverted Polymer Solar Cells
- (2012) Jingbi You et al. ADVANCED MATERIALS
- Very high open-circuit voltage of 5.89 V in organic solar cells with 10-fold-tandem structure
- (2012) Ye Zou et al. APPLIED PHYSICS LETTERS
- Tandem organic photovoltaics using both solution and vacuum deposited small molecules
- (2012) Brian E. Lassiter et al. APPLIED PHYSICS LETTERS
- Enhancement of inverted polymer solar cells with solution-processed ZnO-TiOX composite as cathode buffer layer
- (2012) Jian Liu et al. APPLIED PHYSICS LETTERS
- Conformal coating of titanium suboxide on carbon nanotube networks by atomic layer deposition for inverted organic photovoltaic cells
- (2012) Sung H. Jin et al. CARBON
- Towards fabrication of high-performing organic photovoltaics: new donor-polymer, atomic layer deposited thin buffer layer and plasmonic effects
- (2012) Dong Chan Lim et al. Energy & Environmental Science
- High performance polymeric charge recombination layer for organic tandem solar cells
- (2012) Yinhua Zhou et al. Energy & Environmental Science
- Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells
- (2012) Hin-Lap Yip et al. Energy & Environmental Science
- Room-temperature solution processed SnOx as an electron extraction layer for inverted organic solar cells with superior thermal stability
- (2012) Sara Trost et al. JOURNAL OF MATERIALS CHEMISTRY
- Role of transition metal oxides in the charge recombination layer used in tandem organic photovoltaic cells
- (2012) Jian Li et al. JOURNAL OF MATERIALS CHEMISTRY
- Metal oxides for interface engineering in polymer solar cells
- (2012) Song Chen et al. JOURNAL OF MATERIALS CHEMISTRY
- Understanding S-Shaped Current–Voltage Characteristics in Organic Solar Cells Containing a TiOx Interlayer with Impedance Spectroscopy and Equivalent Circuit Analysis
- (2012) Bernhard Ecker et al. Journal of Physical Chemistry C
- Fluorinated Copper Phthalocyanine Nanowires for Enhancing Interfacial Electron Transport in Organic Solar Cells
- (2012) Seok Min Yoon et al. NANO LETTERS
- Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer
- (2012) Letian Dou et al. Nature Photonics
- Polymer solar cells
- (2012) Gang Li et al. Nature Photonics
- CdSe quantum dot cathode buffer for inverted organic bulk hetero-junction solar cells
- (2012) Yeon-Il Lee et al. ORGANIC ELECTRONICS
- Efficient inverted polymer solar cells incorporating doped organic electron transporting layer
- (2012) Zai-Quan Xu et al. ORGANIC ELECTRONICS
- Zinc Tin Oxide (ZTO) electron transporting buffer layer in inverted organic solar cell
- (2012) Than Zaw Oo et al. ORGANIC ELECTRONICS
- Solution processable, precursor based zinc oxide buffer layers for 4.5% efficient organic tandem solar cells
- (2012) Andreas Puetz et al. ORGANIC ELECTRONICS
- Inverted polymer solar cells with a solution-processed cesium halide interlayer
- (2012) Teng Xiao et al. ORGANIC ELECTRONICS
- Optimization of thermally reduced graphene oxide for an efficient hole transport layer in polymer solar cells
- (2012) Xiaodong Liu et al. ORGANIC ELECTRONICS
- Nb2O5 as a new electron transport layer for double junction polymer solar cells
- (2012) Mahbube K. Siddiki et al. PHYSICAL CHEMISTRY CHEMICAL PHYSICS
- Efficient polymer bulk heterojunction solar cells with cesium acetate as the cathode interfacial layer
- (2012) Yuehua Jia et al. RENEWABLE ENERGY
- A Universal Method to Produce Low-Work Function Electrodes for Organic Electronics
- (2012) Y. Zhou et al. SCIENCE
- Studies of the optimization of recombination layers for inverted tandem polymer solar cells
- (2012) Jae Won Shim et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Inverted organic solar cells with TiOx cathode and graphene oxide anode buffer layers
- (2012) Abd. Rashid bin Mohd Yusoff et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Inverted Polymer Solar Cells with Reduced Interface Recombination
- (2012) Song Chen et al. Advanced Energy Materials
- Design of the Solution-Processed Intermediate Layer by Engineering for Inverted Organic Multi junction Solar Cells
- (2012) Ning Li et al. Advanced Energy Materials
- High Fill Factor Polymer Solar Cells Incorporating a Low Temperature Solution Processed WO3Hole Extraction Layer
- (2012) Tobias Stubhan et al. Advanced Energy Materials
- Toward High-Stability Inverted Polymer Solar Cells with an Electrodeposited ZnO Electron Transporting Layer
- (2012) Sylvia Sanchez et al. Advanced Energy Materials
- In Situ Formation of MoO3in PEDOT:PSS Matrix: A Facile Way to Produce a Smooth and Less Hygroscopic Hole Transport Layer for Highly Stable Polymer Bulk Heterojunction Solar Cells
- (2012) Shuyan Shao et al. Advanced Energy Materials
- Graphene Oxide:Single-Walled Carbon Nanotube-Based Interfacial Layer for All-Solution-Processed Multijunction Solar Cells in Both Regular and Inverted Geometries
- (2012) Vincent C. Tung et al. Advanced Energy Materials
- Efficient Inverted Tandem Polymer Solar Cells with a Solution-Processed Recombination Layer
- (2012) Sandra Kouijzer et al. Advanced Energy Materials
- Efficient and stable polymer solar cells with solution-processed molybdenum oxide interfacial layer
- (2012) Zhan'ao Tan et al. Journal of Materials Chemistry A
- Inverted Organic Solar Cells with Sol-Gel Processed High Work-Function Vanadium Oxide Hole-Extraction Layers
- (2011) Kirill Zilberberg et al. ADVANCED FUNCTIONAL MATERIALS
- Graphene Intermediate Layer in Tandem Organic Photovoltaic Cells
- (2011) Shi Wun Tong et al. ADVANCED FUNCTIONAL MATERIALS
- Simultaneous Enhancement of Open-Circuit Voltage, Short-Circuit Current Density, and Fill Factor in Polymer Solar Cells
- (2011) Zhicai He et al. ADVANCED MATERIALS
- Inverted Polymer Solar Cells Integrated with a Low-Temperature-Annealed Sol-Gel-Derived ZnO Film as an Electron Transport Layer
- (2011) Yanming Sun et al. ADVANCED MATERIALS
- A Robust Inter-Connecting Layer for Achieving High Performance Tandem Polymer Solar Cells
- (2011) Jun Yang et al. ADVANCED MATERIALS
- Combination of Titanium Oxide and a Conjugated Polyelectrolyte for High-Performance Inverted-Type Organic Optoelectronic Devices
- (2011) Hyosung Choi et al. ADVANCED MATERIALS
- Stability of Polymer Solar Cells
- (2011) Mikkel Jørgensen et al. ADVANCED MATERIALS
- Influence of surface roughness of aluminum-doped zinc oxide buffer layers on the performance of inverted organic solar cells
- (2011) Sung-Woo Cho et al. APPLIED PHYSICS LETTERS
- Applications of ZnO in organic and hybrid solar cells
- (2011) Jia Huang et al. Energy & Environmental Science
- Sticky Interconnect for Solution-Processed Tandem Solar Cells
- (2011) Vincent C. Tung et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- Efficiency enhancement in organic solar cells with ferroelectric polymers
- (2011) Yongbo Yuan et al. NATURE MATERIALS
- High-efficiency inverted dithienogermole–thienopyrrolodione-based polymer solar cells
- (2011) Cephas E. Small et al. Nature Photonics
- Inverted organic solar cells using a solution processed aluminum-doped zinc oxide buffer layer
- (2011) Tobias Stubhan et al. ORGANIC ELECTRONICS
- Comparison of various sol–gel derived metal oxide layers for inverted organic solar cells
- (2011) Hyunchul Oh et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Controlled Synthesis and Energy Applications of One-Dimensional Conducting Polymer Nanostructures: An Overview
- (2011) Zhigang Yin et al. Advanced Energy Materials
- A New Class of Semiconducting Polymers for Bulk Heterojunction Solar Cells with Exceptionally High Performance
- (2010) Yongye Liang et al. ACCOUNTS OF CHEMICAL RESEARCH
- Enhanced Performance in Polymer Solar Cells by Surface Energy Control
- (2010) Xavier Bulliard et al. ADVANCED FUNCTIONAL MATERIALS
- Interface Engineering for Organic Electronics
- (2010) Hong Ma et al. ADVANCED FUNCTIONAL MATERIALS
- A Metal-Oxide Interconnection Layer for Polymer Tandem Solar Cells with an Inverted Architecture
- (2010) Cheng-Hsuan Chou et al. ADVANCED MATERIALS
- For the Bright Future-Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4%
- (2010) Yongye Liang et al. ADVANCED MATERIALS
- Inverted tandem organic solar cells with a MoO3/Ag/Al/Ca intermediate layer
- (2010) X. W. Sun et al. APPLIED PHYSICS LETTERS
- High-efficiency inverted bulk heterojunction polymer solar cells with UV ozone-treated ultrathin aluminum interlayer
- (2010) Hongmei Zhang et al. APPLIED PHYSICS LETTERS
- Inverted ITO-free organic solar cells based on p and n semiconducting oxides. New designs for integration in tandem cells, top or bottom detecting devices, and photovoltaic windows
- (2010) Jon Ajuria et al. Energy & Environmental Science
- The role of buffer layers in polymer solar cells
- (2010) Riccardo Po et al. Energy & Environmental Science
- Inverted organic solar cells with ITO electrodes modified with an ultrathin Al2O3 buffer layer deposited by atomic layer deposition
- (2010) Yinhua Zhou et al. JOURNAL OF MATERIALS CHEMISTRY
- Interface investigation and engineering – achieving high performance polymer photovoltaic devices
- (2010) Li-Min Chen et al. JOURNAL OF MATERIALS CHEMISTRY
- Enhanced Power Conversion Efficiency of Inverted Organic Solar Cells with a Ga-Doped ZnO Nanostructured Thin Film Prepared Using Aqueous Solution
- (2010) Kyung-Sik Shin et al. Journal of Physical Chemistry C
- Plasmonics for improved photovoltaic devices
- (2010) Harry A. Atwater et al. NATURE MATERIALS
- Low work function metal modified ITO as cathode for inverted polymer solar cells
- (2010) Chang Yun Jiang et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Organic solar cells incorporating buffer layers from indium doped zinc oxide nanoparticles
- (2010) Andreas Puetz et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Highly Efficient Tandem Polymer Photovoltaic Cells
- (2009) Srinivas Sista et al. ADVANCED MATERIALS
- Optimizing Polymer Tandem Solar Cells
- (2009) Jan Gilot et al. ADVANCED MATERIALS
- The effect of molybdenum oxide interlayer on organic photovoltaic cells
- (2009) Do Young Kim et al. APPLIED PHYSICS LETTERS
- An inverted organic solar cell with an ultrathin Ca electron-transporting layer and MoO3 hole-transporting layer
- (2009) D. W. Zhao et al. APPLIED PHYSICS LETTERS
- Organic tandem solar cells: A review
- (2009) Tayebeh Ameri et al. Energy & Environmental Science
- Highly efficient flexible inverted organic solar cells using atomic layer deposited ZnO as electron selective layer
- (2009) Jen-Chun Wang et al. JOURNAL OF MATERIALS CHEMISTRY
- Bulk heterojunction solar cells with internal quantum efficiency approaching 100%
- (2009) Sung Heum Park et al. Nature Photonics
- Solution processed polymer tandem cell utilizing organic layer coated nano-crystalline TiO2 as interlayer
- (2009) Won-Suk Chung et al. ORGANIC ELECTRONICS
- Efficient organic photovoltaic tandem cells with novel transparent conductive oxide interlayer and poly (3-hexylthiophene): Fullerene active layers
- (2009) Jun Sakai et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- On the Role of Bathocuproine in Organic Photovoltaic Cells
- (2008) Hans Gommans et al. ADVANCED FUNCTIONAL MATERIALS
- Self-Organized Buffer Layers in Organic Solar Cells
- (2008) Qingshuo Wei et al. ADVANCED MATERIALS
- Design Rules for Donors in Bulk-Heterojunction Tandem Solar Cells?Towards 15 % Energy-Conversion Efficiency
- (2008) G. Dennler et al. ADVANCED MATERIALS
- A Semi-transparent Plastic Solar Cell Fabricated by a Lamination Process
- (2008) J. Huang et al. ADVANCED MATERIALS
- Optimal negative electrodes for poly(3-hexylthiophene): [6,6]-phenyl C61-butyric acid methyl ester bulk heterojunction photovoltaic devices
- (2008) Matthew O. Reese et al. APPLIED PHYSICS LETTERS
- Stability/degradation of polymer solar cells
- (2008) Mikkel Jørgensen et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started