Highly Efficient Inverted Organic Solar Cells Through Material and Interfacial Engineering of Indacenodithieno[3,2-b]thiophene-Based Polymers and Devices

Discrepancy of Optimum Ratio in Bulk Heterojunction Photovoltaic Devices: Initial Cell Efficiency vs Long-Term Stability

(2013) Hyunmin Park et al.   ACS Applied Materials & Interfaces

Efficient Solution-Processed Small-Molecule Solar Cells with Inverted Structure

(2013) Aung Ko Ko Kyaw et al.   ADVANCED MATERIALS

Molecular Weight Effect on the Absorption, Charge Carrier Mobility, and Photovoltaic Performance of an Indacenodiselenophene-Based Ladder-Type Polymer

(2013) Jeremy J. Intemann et al.   CHEMISTRY OF MATERIALS

Elucidating Operating Modes of Bulk-Heterojunction Solar Cells from Impedance Spectroscopy Analysis

(2013) Germà Garcia-Belmonte et al.   Journal of Physical Chemistry Letters

23% enhanced efficiency of polymer solar cells processed with 1-chloronaphthalene as the solvent additive

(2013) Xiaowen Hu et al.   SYNTHETIC METALS

A polymer tandem solar cell with 10.6% power conversion efficiency

(2013) Jingbi You et al.   Nature Communications

Design of Semiconducting Indacenodithiophene Polymers for High Performance Transistors and Solar Cells

(2012) Iain McCulloch et al.   ACCOUNTS OF CHEMICAL RESEARCH

Highly Efficient Polymer Light-Emitting Diodes Using Graphene Oxide as a Hole Transport Layer

(2012) Bo Ram Lee et al.   ACS Nano

High-Performance Inverted Polymer Solar Cells: Device Characterization, Optical Modeling, and Hole-Transporting Modifications

(2012) Jingyu Zou et al.   ADVANCED FUNCTIONAL MATERIALS

A Solution-Processed MoOx Anode Interlayer for Use within Organic Photovoltaic Devices

(2012) Jacek J. Jasieniak et al.   ADVANCED FUNCTIONAL MATERIALS

Improving the Ordering and Photovoltaic Properties by Extending π-Conjugated Area of Electron-Donating Units in Polymers with D-A Structure

(2012) Ye Huang et al.   ADVANCED MATERIALS

Hole and Electron Extraction Layers Based on Graphene Oxide Derivatives for High-Performance Bulk Heterojunction Solar Cells

(2012) Jun Liu et al.   ADVANCED MATERIALS

Improved Charge Transport and Absorption Coefficient in Indacenodithieno[3,2-b]thiophene-based Ladder-Type Polymer Leading to Highly Efficient Polymer Solar Cells

(2012) Yun-Xiang Xu et al.   ADVANCED MATERIALS

Diindenothieno[2,3-b]thiophene arene for efficient organic photovoltaics with an extra high open-circuit voltage of 1.14 ev

(2012) Yen-Ju Cheng et al.   CHEMICAL COMMUNICATIONS

Diketopyrrolopyrrole (DPP)-based materials for organic photovoltaics

(2012) Sanyin Qu et al.   CHEMICAL COMMUNICATIONS

Prominent Short-Circuit Currents of Fluorinated Quinoxaline-Based Copolymer Solar Cells with a Power Conversion Efficiency of 8.0%

(2012) Hsieh-Chih Chen et al.   CHEMISTRY OF MATERIALS

Inverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte

(2012) Tingbin Yang et al.   Energy & Environmental Science

Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells

(2012) Hin-Lap Yip et al.   Energy & Environmental Science

Recent development of push–pull conjugated polymers for bulk-heterojunction photovoltaics: rational design and fine tailoring of molecular structures

(2012) Chunhui Duan et al.   JOURNAL OF MATERIALS CHEMISTRY

Influence of a novel fluorosurfactant modified PEDOT:PSS hole transport layer on the performance of inverted organic solar cells

(2012) Fang Jeng Lim et al.   JOURNAL OF MATERIALS CHEMISTRY

Functional fullerenes for organic photovoltaics

(2012) Chang-Zhi Li et al.   JOURNAL OF MATERIALS CHEMISTRY

Benzotrithiophene-Based Donor–Acceptor Copolymers with Distinct Supramolecular Organizations

(2012) Xin Guo et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Synthesis, Molecular and Photovoltaic Properties of Donor–Acceptor Conjugated Polymers Incorporating a New Heptacylic Indacenodithieno[3,2-b]thiophene Arene

(2012) Huan-Hsuan Chang et al.   MACROMOLECULES

Effects of π-Conjugated Bridges on Photovoltaic Properties of Donor-π-Acceptor Conjugated Copolymers

(2012) Xiaochen Wang et al.   MACROMOLECULES

Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer

(2012) Letian Dou et al.   Nature Photonics

Simultaneous Enhancement of Open-Circuit Voltage, Short-Circuit Current Density, and Fill Factor in Polymer Solar Cells

(2011) Zhicai He et al.   ADVANCED MATERIALS

Surface Doping of Conjugated Polymers by Graphene Oxide and Its Application for Organic Electronic Devices

(2011) Yan Gao et al.   ADVANCED MATERIALS

Combination of Molecular, Morphological, and Interfacial Engineering to Achieve Highly Efficient and Stable Plastic Solar Cells

(2011) Chih-Yu Chang et al.   ADVANCED MATERIALS

End-Capping Effect of a Narrow Bandgap Conjugated Polymer on Bulk Heterojunction Solar Cells

(2011) Jin Kuen Park et al.   ADVANCED MATERIALS

Inverted Polymer Solar Cells Integrated with a Low-Temperature-Annealed Sol-Gel-Derived ZnO Film as an Electron Transport Layer

(2011) Yanming Sun et al.   ADVANCED MATERIALS

Increased open circuit voltage in fluorinated benzothiadiazole-based alternating conjugated polymers

(2011) Yong Zhang et al.   CHEMICAL COMMUNICATIONS

Self-Assembled and Cross-Linked Fullerene Interlayer on Titanium Oxide for Highly Efficient Inverted Polymer Solar Cells

(2011) Yen-Ju Cheng et al.   CHEMISTRY OF MATERIALS

Open-Circuit Voltage Limitation in Low-Bandgap Diketopyrrolopyrrole-Based Polymer Solar Cells Processed from Different Solvents

(2011) Pablo P. Boix et al.   Journal of Physical Chemistry C

Donor–Acceptor Conjugated Polymer Based on Naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for High-Performance Polymer Solar Cells

(2011) Ming Wang et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

High-efficiency inverted dithienogermole–thienopyrrolodione-based polymer solar cells

(2011) Cephas E. Small et al.   Nature Photonics

Recent development of the inverted configuration organic solar cells

(2011) Fujun Zhang et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Enhanced Open-Circuit Voltage in High Performance Polymer/Fullerene Bulk-Heterojunction Solar Cells by Cathode Modification with a C60 Surfactant

(2011) Kevin M. O'Malley et al.   Advanced Energy Materials

Solution-Processable Graphene Oxide as an Efficient Hole Transport Layer in Polymer Solar Cells

(2010) Shao-Sian Li et al.   ACS Nano

Higher Molecular Weight Leads to Improved Photoresponsivity, Charge Transport and Interfacial Ordering in a Narrow Bandgap Semiconducting Polymer

(2010) Minghong Tong et al.   ADVANCED FUNCTIONAL MATERIALS

Interface Engineering for Organic Electronics

(2010) Hong Ma et al.   ADVANCED FUNCTIONAL MATERIALS

Improved Performance of Polymer Bulk Heterojunction Solar Cells Through the Reduction of Phase Separation via Solvent Additives

(2010) Corey V. Hoven et al.   ADVANCED MATERIALS

Graphene and Graphene Oxide: Synthesis, Properties, and Applications

(2010) Yanwu Zhu et al.   ADVANCED MATERIALS

The role of buffer layers in polymer solar cells

(2010) Riccardo Po et al.   Energy & Environmental Science

Interface investigation and engineering – achieving high performance polymer photovoltaic devices

(2010) Li-Min Chen et al.   JOURNAL OF MATERIALS CHEMISTRY

Interface materials for organic solar cells

(2010) Roland Steim et al.   JOURNAL OF MATERIALS CHEMISTRY

Highly Efficient Tandem Polymer Photovoltaic Cells

(2009) Srinivas Sista et al.   ADVANCED MATERIALS

Synthesis of Conjugated Polymers for Organic Solar Cell Applications

(2009) Yen-Ju Cheng et al.   CHEMICAL REVIEWS

Organic tandem solar cells: A review

(2009) Tayebeh Ameri et al.   Energy & Environmental Science

A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies

(2009) Frederik C. Krebs et al.   JOURNAL OF MATERIALS CHEMISTRY

The Effect of Poly(3-hexylthiophene) Molecular Weight on Charge Transport and the Performance of Polymer:Fullerene Solar Cells

(2008) Amy M. Ballantyne et al.   ADVANCED FUNCTIONAL MATERIALS

Design Rules for Donors in Bulk-Heterojunction Tandem Solar Cells?Towards 15 % Energy-Conversion Efficiency

(2008) G. Dennler et al.   ADVANCED MATERIALS

High performance ambient processed inverted polymer solar cells through interfacial modification with a fullerene self-assembled monolayer

(2008) Steven K. Hau et al.   APPLIED PHYSICS LETTERS

High Performance Amorphous Metallated π-Conjugated Polymers for Field-Effect Transistors and Polymer Solar Cells

(2008) Nam Seob Baek et al.   CHEMISTRY OF MATERIALS

Processing Additives for Improved Efficiency from Bulk Heterojunction Solar Cells

(2008) Jae Kwan Lee et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells

(2008) M. D. Irwin et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Flexible organic P3HT:PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime

(2008) Jens A. Hauch et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Pathways for the degradation of organic photovoltaic P3HT:PCBM based devices

(2008) Matthew O. Reese et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS