Carrier-Selectivity-Dependent Charge Recombination Dynamics in Organic Photovoltaic Cells with a Ferroelectric Blend Interlayer

Polymer Homo-Tandem Solar Cells with Best Efficiency of 11.3%

(2015) Huiqiong Zhou et al.   ADVANCED MATERIALS

Solution-processable metal oxides/chelates as electrode buffer layers for efficient and stable polymer solar cells

(2015) Fuzhi Wang et al.   Energy & Environmental Science

A high efficiency solution processed polymer inverted triple-junction solar cell exhibiting a power conversion efficiency of 11.83%

(2015) Abd. Rashid bin Mohd Yusoff et al.   Energy & Environmental Science

Ultrathin Organic Solar Cells with Graphene Doped by Ferroelectric Polarization

(2014) Keumok Kim et al.   ACS Applied Materials & Interfaces

Donor-Acceptor Alternating Copolymer Nanowires for Highly Efficient Organic Solar Cells

(2014) Jaewon Lee et al.   ADVANCED MATERIALS

Increased Open-Circuit Voltage of Organic Solar Cells by Reduced Donor-Acceptor Interface Area

(2014) Koen Vandewal et al.   ADVANCED MATERIALS

Single-Junction Polymer Solar Cells Exceeding 10% Power Conversion Efficiency

(2014) Jing-De Chen et al.   ADVANCED MATERIALS

Impact of mesoscale order on open-circuit voltage in organic solar cells

(2014) Carl Poelking et al.   NATURE MATERIALS

Small-molecule solar cells with efficiency over 9%

(2014) Qian Zhang et al.   Nature Photonics

Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells

(2014) Yuhang Liu et al.   Nature Communications

Lateral Organic Solar Cells with Self-Assembled Semiconductor Nanowires

(2014) Min Kim et al.   Advanced Energy Materials

High-Efficiency Organic Photovoltaic Cells Based on the Solution-Processable Hole Transporting Interlayer Copper Thiocyanate (CuSCN) as a Replacement for PEDOT:PSS

(2014) Nir Yaacobi-Gross et al.   Advanced Energy Materials

IR sensitization of an indene-C60 bisadduct (ICBA) in ternary organic solar cells

(2013) Tayebeh Ameri et al.   Energy & Environmental Science

Additives for morphology control in high-efficiency organic solar cells

(2013) Hsueh-Chung Liao et al.   Materials Today

Graphene for True Ohmic Contact at Metal–Semiconductor Junctions

(2013) Kyung-Eun Byun et al.   NANO LETTERS

Mechanisms of device degradation in organic solar cells: Influence of charge injection at the metal/organic contacts

(2013) Wenchao Yang et al.   ORGANIC ELECTRONICS

Overcoming the “Light-Soaking” Issue in Inverted Organic Solar Cells by the Use of Al:ZnO Electron Extraction Layers

(2013) Sara Trost et al.   Advanced Energy Materials

Synthesis and Application of Ferroelectric P(VDF-TrFE) Nanoparticles in Organic Photovoltaic Devices for High Efficiency

(2013) Zhengguo Xiao et al.   Advanced Energy Materials

Electrical Performance of Organic Solar Cells with Additive-Assisted Vertical Phase Separation in the Photoactive Layer

(2013) Min Kim et al.   Advanced Energy Materials

Charge carrier transport and contact selectivity limit the operation of PTB7-based organic solar cells of varying active layer thickness

(2013) Antonio Guerrero et al.   Journal of Materials Chemistry A

Molecular Design of Photovoltaic Materials for Polymer Solar Cells: Toward Suitable Electronic Energy Levels and Broad Absorption

(2012) Yongfang Li   ACCOUNTS OF CHEMICAL RESEARCH

Transition Metal Oxide Work Functions: The Influence of Cation Oxidation State and Oxygen Vacancies

(2012) Mark T. Greiner et al.   ADVANCED FUNCTIONAL MATERIALS

Energy Level Modulation of HOMO, LUMO, and Band-Gap in Conjugated Polymers for Organic Photovoltaic Applications

(2012) Bong-Gi Kim et al.   ADVANCED FUNCTIONAL MATERIALS

Tuning the Energy Level Offset between Donor and Acceptor with Ferroelectric Dipole Layers for Increased Efficiency in Bilayer Organic Photovoltaic Cells

(2012) Bin Yang et al.   ADVANCED MATERIALS

Metal Oxide Nanoparticles as an Electron-Transport Layer in High-Performance and Stable Inverted Polymer Solar Cells

(2012) Jingbi You et al.   ADVANCED MATERIALS

Cascade organic solar cells with energy-level-matched three photon-harvesting layers

(2012) Myungsun Sim et al.   CHEMICAL PHYSICS LETTERS

Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells

(2012) Hin-Lap Yip et al.   Energy & Environmental Science

Synthesis and photovoltaic properties of benzo[1,2-b:4,5-b′]dithiophene derivative-based polymers with deep HOMO levels

(2012) Heung Gyu Kim et al.   JOURNAL OF MATERIALS CHEMISTRY

Insights from Transient Optoelectronic Analyses on the Open-Circuit Voltage of Organic Solar Cells

(2012) Dan Credgington et al.   Journal of Physical Chemistry Letters

Charge extraction and photocurrent in organic bulk heterojunction solar cells

(2012) Andreas Petersen et al.   PHYSICAL REVIEW B

A Universal Method to Produce Low-Work Function Electrodes for Organic Electronics

(2012) Y. Zhou et al.   SCIENCE

Nongeminate Recombination in Planar and Bulk Heterojunction Organic Solar Cells

(2012) Alexander Foertig et al.   Advanced Energy Materials

Simultaneous Open-Circuit Voltage Enhancement and Short-Circuit Current Loss in Polymer: Fullerene Solar Cells Correlated by Reduced Quantum Efficiency for Photoinduced Electron Transfer

(2012) Daniele Di Nuzzo et al.   Advanced Energy Materials

Efficient Polymer Solar Cells Based on Poly(3-hexylthiophene):Indene-C70 Bisadduct with a MoO3 Buffer Layer

(2011) Xi Fan et al.   ADVANCED FUNCTIONAL MATERIALS

Influence of Hole-Transport Layers and Donor Materials on Open-Circuit Voltage and Shape of I-V Curves of Organic Solar Cells

(2011) Wolfgang Tress et al.   ADVANCED FUNCTIONAL MATERIALS

Non-Geminate Recombination as the Primary Determinant of Open-Circuit Voltage in Polythiophene:Fullerene Blend Solar Cells: an Analysis of the Influence of Device Processing Conditions

(2011) Dan Credgington et al.   ADVANCED FUNCTIONAL MATERIALS

Simultaneous Enhancement of Open-Circuit Voltage, Short-Circuit Current Density, and Fill Factor in Polymer Solar Cells

(2011) Zhicai He et al.   ADVANCED MATERIALS

Stretchable Organic Solar Cells

(2011) Darren J. Lipomi et al.   ADVANCED MATERIALS

Organic solar cells: A new look at traditional models

(2011) Jonathan D. Servaites et al.   Energy & Environmental Science

Transient Optoelectronic Analysis of Charge Carrier Losses in a Selenophene/Fullerene Blend Solar Cell

(2011) Andrea Maurano et al.   Journal of Physical Chemistry C

Relationship between Diode Saturation Current and Open Circuit Voltage in Poly(3-alkylthiophene) Solar Cells as a Function of Device Architecture, Processing Conditions, and Alkyl Side Chain Length

(2011) Derek M. Stevens et al.   Journal of Physical Chemistry C

On Voltage, Photovoltage, and Photocurrent in Bulk Heterojunction Organic Solar Cells

(2011) Juan Bisquert et al.   Journal of Physical Chemistry Letters

Tailoring organic heterojunction interfaces in bilayer polymer photovoltaic devices

(2011) Akira Tada et al.   NATURE MATERIALS

Efficiency enhancement in organic solar cells with ferroelectric polymers

(2011) Yongbo Yuan et al.   NATURE MATERIALS

High-efficiency inverted dithienogermole–thienopyrrolodione-based polymer solar cells

(2011) Cephas E. Small et al.   Nature Photonics

High Performance Organic Photovoltaic Cells Using Polymer-Hybridized ZnO Nanocrystals as a Cathode Interlayer

(2011) Sae Byeok Jo et al.   Advanced Energy Materials

Enhanced Performance in Polymer Solar Cells by Surface Energy Control

(2010) Xavier Bulliard et al.   ADVANCED FUNCTIONAL MATERIALS

Poly(3-hexylthiophene) Nanorods with Aligned Chain Orientation for Organic Photovoltaics

(2010) Jong Soo Kim et al.   ADVANCED FUNCTIONAL MATERIALS

Multiple NaNbO3/Nb2O5Heterostructure Nanotubes: A New Class of Ferroelectric/Semiconductor Nanomaterials

(2010) Chenglin Yan et al.   ADVANCED MATERIALS

For the Bright Future-Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4%

(2010) Yongye Liang et al.   ADVANCED MATERIALS

The drift-diffusion interpretation of the electron current within the organic semiconductor characterized by the bulk single energy trap level

(2010) B. Cvikl   JOURNAL OF APPLIED PHYSICS

Solubility-Controlled Structural Ordering of Narrow Bandgap Conjugated Polymers

(2010) Yeong Don Park et al.   Advanced Energy Materials

Bulk Photovoltaic Effect at Visible Wavelength in Epitaxial Ferroelectric BiFeO3Thin Films

(2009) Wei Ji et al.   ADVANCED MATERIALS

Synthesis of Conjugated Polymers for Organic Solar Cell Applications

(2009) Yen-Ju Cheng et al.   CHEMICAL REVIEWS

Organic photovoltaics

(2009) Bernard Kippelen et al.   Energy & Environmental Science

On the origin of the open-circuit voltage of polymer–fullerene solar cells

(2009) Koen Vandewal et al.   NATURE MATERIALS

Bulk heterojunction solar cells with internal quantum efficiency approaching 100%

(2009) Sung Heum Park et al.   Nature Photonics

Efficient Polythiophene/Polyfluorene Copolymer Bulk Heterojunction Photovoltaic Devices: Device Physics and Annealing Effects

(2008) Christopher R. McNeill et al.   ADVANCED FUNCTIONAL MATERIALS

Polymer Solar Cells That Use Self-Assembled-Monolayer- Modified ZnO/Metals as Cathodes

(2008) Hin-Lap Yip et al.   ADVANCED MATERIALS

Organic non-volatile memories from ferroelectric phase-separated blends

(2008) Kamal Asadi et al.   NATURE MATERIALS

Organic ferroelectrics

(2008) Sachio Horiuchi et al.   NATURE MATERIALS

Analytical model for the open-circuit voltage and its associated resistance in organic planar heterojunction solar cells

(2008) D. Cheyns et al.   PHYSICAL REVIEW B

p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells

(2008) M. D. Irwin et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA