标题
Interfacial Materials for Organic Solar Cells: Recent Advances and Perspectives
作者
关键词
-
出版物
Advanced Science
Volume 3, Issue 8, Pages 1500362
出版商
Wiley
发表日期
2016-02-19
DOI
10.1002/advs.201500362
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Facile Preparation of Molybdenum Bronzes as an Efficient Hole Extraction Layer in Organic Photovoltaics
- (2015) Jiantai Wang et al. ACS Applied Materials & Interfaces
- Enhancing Mechanical Properties of Highly Efficient Polymer Solar Cells Using Size-Tuned Polymer Nanoparticles
- (2015) Dong Jin Kang et al. ACS Applied Materials & Interfaces
- Simple O2 Plasma-Processed V2O5 as an Anode Buffer Layer for High-Performance Polymer Solar Cells
- (2015) Xichang Bao et al. ACS Applied Materials & Interfaces
- Improving the Conductivity of PEDOT:PSS Hole Transport Layer in Polymer Solar Cells via Copper(II) Bromide Salt Doping
- (2015) Zhiqiang Zhao et al. ACS Applied Materials & Interfaces
- Single-Junction Polymer Solar Cells with Over 10% Efficiency by a Novel Two-Dimensional Donor–Acceptor Conjugated Copolymer
- (2015) Chang Liu et al. ACS Applied Materials & Interfaces
- Hybrid Organic/Inorganic Thin-Film Multijunction Solar Cells Exceeding 11% Power Conversion Efficiency
- (2015) Steffen Roland et al. ADVANCED MATERIALS
- Single-Junction Organic Solar Cells Based on a Novel Wide-Bandgap Polymer with Efficiency of 9.7%
- (2015) Lijun Huo et al. ADVANCED MATERIALS
- Post-treatment-Free Solution-Processed Non-stoichiometric NiOxNanoparticles for Efficient Hole-Transport Layers of Organic Optoelectronic Devices
- (2015) Fei Jiang et al. ADVANCED MATERIALS
- Polymer Homo-Tandem Solar Cells with Best Efficiency of 11.3%
- (2015) Huiqiong Zhou et al. ADVANCED MATERIALS
- Efficient organic solar cells using copper(I) iodide (CuI) hole transport layers
- (2015) Ying Peng et al. APPLIED PHYSICS LETTERS
- Stability of inverted organic solar cells with ZnO contact layers deposited from precursor solutions
- (2015) Bradley A. MacLeod et al. Energy & Environmental Science
- Au-doped single layer graphene nanoribbons for a record-high efficiency ITO-free tandem polymer solar cell
- (2015) Abd. Rashid bin Mohd Yusoff et al. Energy & Environmental Science
- Air-processed polymer tandem solar cells with power conversion efficiency exceeding 10%
- (2015) Ning Li et al. Energy & Environmental Science
- Solution-processable metal oxides/chelates as electrode buffer layers for efficient and stable polymer solar cells
- (2015) Fuzhi Wang et al. Energy & Environmental Science
- Fully printed organic tandem solar cells using solution-processed silver nanowires and opaque silver as charge collecting electrodes
- (2015) Fei Guo et al. Energy & Environmental Science
- Annealing-free highly crystalline solution-processed molecular metal oxides for efficient single-junction and tandem polymer solar cells
- (2015) Maria Vasilopoulou et al. Energy & Environmental Science
- Design of a versatile interconnecting layer for highly efficient series-connected polymer tandem solar cells
- (2015) Lijian Zuo et al. Energy & Environmental Science
- A high efficiency solution processed polymer inverted triple-junction solar cell exhibiting a power conversion efficiency of 11.83%
- (2015) Abd. Rashid bin Mohd Yusoff et al. Energy & Environmental Science
- Recent progress and perspective in solution-processed Interfacial materials for efficient and stable polymer and organometal perovskite solar cells
- (2015) Chu-Chen Chueh et al. Energy & Environmental Science
- Energy Level Tuning of Non-Fullerene Acceptors in Organic Solar Cells
- (2015) Kjell Cnops et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- Photoconductive Cathode Interlayer for Highly Efficient Inverted Polymer Solar Cells
- (2015) Li Nian et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- Old Metal Oxide Clusters in New Applications: Spontaneous Reduction of Keggin and Dawson Polyoxometalate Layers by a Metallic Electrode for Improving Efficiency in Organic Optoelectronics
- (2015) Maria Vasilopoulou et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- Plasmon enhanced organic devices utilizing highly ordered nanoimprinted gold nanodisks and nitrogen doped graphene
- (2015) Mohd Asri Mat Teridi et al. Nanoscale
- Efficient polymer solar cells employing a non-conjugated small-molecule electrolyte
- (2015) Xinhua Ouyang et al. Nature Photonics
- Single-junction polymer solar cells with high efficiency and photovoltage
- (2015) Zhicai He et al. Nature Photonics
- Exciton blocking and dissociation by a p -type anode buffer in small molecule bulk heterojunction organic photovoltaic with small ratio donor of phosphorescent material
- (2015) Juan Wang et al. ORGANIC ELECTRONICS
- Soluble carbon nanotubes/phthalocyanines transparent electrode and interconnection layers for flexible inverted polymer tandem solar cells
- (2015) M. Raïssi et al. ORGANIC ELECTRONICS
- Metal salt modified PEDOT:PSS as anode buffer layer and its effect on power conversion efficiency of organic solar cells
- (2015) Burak Kadem et al. ORGANIC ELECTRONICS
- Solution-processable polymeric solar cells: A review on materials, strategies and cell architectures to overcome 10%
- (2015) Ikerne Etxebarria et al. ORGANIC ELECTRONICS
- Application of a water-soluble metallophthalocyanine derivative as a cathode interlayer for the polymer solar cells
- (2015) Tao Jia et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Zinc oxide: Conjugated polymer nanocomposite as cathode buffer layer for solution processed inverted organic solar cells
- (2015) Na Wu et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Vertical phase separation of PSS in organic photovoltaics with a nickel oxide doped PEDOT: PSS interlayer
- (2015) Anil Kanwat et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- 10.5% efficient polymer and amorphous silicon hybrid tandem photovoltaic cell
- (2015) Jeehwan Kim et al. Nature Communications
- A generic concept to overcome bandgap limitations for designing highly efficient multi-junction photovoltaic cells
- (2015) Fei Guo et al. Nature Communications
- Efficient Vacuum-Deposited Tandem Organic Solar Cells with Fill Factors Higher Than Single-Junction Subcells
- (2015) Hyun-Sub Shim et al. Advanced Energy Materials
- Dual Functional Zwitterionic Fullerene Interlayer for Efficient Inverted Polymer Solar Cells
- (2015) Yao Liu et al. Advanced Energy Materials
- Polymer Solar Cells with Efficiency >10% Enabled via a Facile Solution-Processed Al-Doped ZnO Electron Transporting Layer
- (2015) Lethy Krishnan Jagadamma et al. Advanced Energy Materials
- Tin Oxide (SnOx) as Universal “Light-Soaking” Free Electron Extraction Material for Organic Solar Cells
- (2015) Sara Trost et al. Advanced Energy Materials
- A Universal Interface Layer Based on an Amine-Functionalized Fullerene Derivative with Dual Functionality for Efficient Solution Processed Organic and Perovskite Solar Cells
- (2015) Hamed Azimi et al. Advanced Energy Materials
- Carrier-Selectivity-Dependent Charge Recombination Dynamics in Organic Photovoltaic Cells with a Ferroelectric Blend Interlayer
- (2015) Sae Byeok Jo et al. Advanced Energy Materials
- 10.4% Power Conversion Efficiency of ITO-Free Organic Photovoltaics Through Enhanced Light Trapping Configuration
- (2015) Jiang Huang et al. Advanced Energy Materials
- An anode buffer layer with size-controlled Ag nanoparticles for polymer solar cells with improved efficiencies
- (2015) Dhanavel Ganeshan et al. RSC Advances
- Efficiency exceeding 10% for inverted polymer solar cells with a ZnO/ionic liquid combined cathode interfacial layer
- (2015) W. Yu et al. Journal of Materials Chemistry A
- Improved performance of organic solar cells by incorporating silica-coated silver nanoparticles in the buffer layer
- (2015) Yang Hao et al. Journal of Materials Chemistry C
- MoOx and V2Ox as hole and electron transport layers through functionalized intercalation in normal and inverted organic optoelectronic devices
- (2015) Xinchen Li et al. Light-Science & Applications
- Efficiency improved for inverted polymer solar cells with electrostatically self-assembled BenMeIm-Cl ionic liquid layer as cathode interface layer
- (2015) Ping Fu et al. Nano Energy
- Perovskite/polymer monolithic hybrid tandem solar cells utilizing a low-temperature, full solution process
- (2015) Chun-Chao Chen et al. Materials Horizons
- Roll-Coated Fabrication of Fullerene-Free Organic Solar Cells with Improved Stability
- (2015) Pei Cheng et al. Advanced Science
- Morphology Evolution in High-Performance Polymer Solar Cells Processed from Nonhalogenated Solvent
- (2015) Wanzhu Cai et al. Advanced Science
- Low Temperature Aqueous Electrodeposited TiOx Thin Films as Electron Extraction Layer for Efficient Inverted Organic Solar Cells
- (2014) Kim Hai Wong et al. ACS Applied Materials & Interfaces
- High-Performance Inverted Solar Cells Based on Blend Films of ZnO Naoparticles and TiO2 Nanorods as a Cathode Buffer Layer
- (2014) Pandeng Li et al. ACS Applied Materials & Interfaces
- Disodium Edetate As a Promising Interfacial Material for Inverted Organic Solar Cells and the Device Performance Optimization
- (2014) Xiaodong Li et al. ACS Applied Materials & Interfaces
- Finding the Lost Open-Circuit Voltage in Polymer Solar Cells by UV-Ozone Treatment of the Nickel Acetate Anode Buffer Layer
- (2014) Fuzhi Wang et al. ACS Applied Materials & Interfaces
- Plasmonic Organic Solar Cells Employing Nanobump Assembly via Aerosol-Derived Nanoparticles
- (2014) Kinam Jung et al. ACS Nano
- Au@Ag Core–Shell Nanocubes for Efficient Plasmonic Light Scattering Effect in Low Bandgap Organic Solar Cells
- (2014) Se-Woong Baek et al. ACS Nano
- Lending Triarylphosphine Oxide to Phenanthroline: a Facile Approach to High-Performance Organic Small-Molecule Cathode Interfacial Material for Organic Photovoltaics utilizing Air-Stable Cathodes
- (2014) Wan-Yi Tan et al. ADVANCED FUNCTIONAL MATERIALS
- Over 1.1 eV Workfunction Tuning of Cesium Intercalated Metal Oxides for Functioning as Both Electron and Hole Transport Layers in Organic Optoelectronic Devices
- (2014) Xinchen Li et al. ADVANCED FUNCTIONAL MATERIALS
- Structure Tuning of Crown Ether Grafted Conjugated Polymers as the Electron Transport Layer in Bulk-Heterojunction Polymer Solar Cells for High Performance
- (2014) Yi-Lun Li et al. ADVANCED FUNCTIONAL MATERIALS
- Chemically Controlled Reversible and Irreversible Extraction Barriers Via Stable Interface Modification of Zinc Oxide Electron Collection Layer in Polycarbazole-based Organic Solar Cells
- (2014) Sarah R. Cowan et al. ADVANCED FUNCTIONAL MATERIALS
- An Efficient Triple-Junction Polymer Solar Cell Having a Power Conversion Efficiency Exceeding 11%
- (2014) Chun-Chao Chen et al. ADVANCED MATERIALS
- Simplified Tandem Polymer Solar Cells with an Ideal Self-Organized Recombination Layer
- (2014) Hongkyu Kang et al. ADVANCED MATERIALS
- Highly Efficient Tandem Polymer Solar Cells with a Photovoltaic Response in the Visible Light Range
- (2014) Zhong Zheng et al. ADVANCED MATERIALS
- Suppressed Charge Recombination in Inverted Organic Photovoltaics via Enhanced Charge Extraction by Using a Conductive Fullerene Electron Transport Layer
- (2014) Chang-Zhi Li et al. ADVANCED MATERIALS
- Single-Junction Polymer Solar Cells Exceeding 10% Power Conversion Efficiency
- (2014) Jing-De Chen et al. ADVANCED MATERIALS
- An Organic Surface Modifier to Produce a High Work Function Transparent Electrode for High Performance Polymer Solar Cells
- (2014) Hyosung Choi et al. ADVANCED MATERIALS
- A water-processable organic electron-selective layer for solution-processed inverted organic solar cells
- (2014) Dongcheng Chen et al. APPLIED PHYSICS LETTERS
- The action mechanism of TiO2:NaYF4:Yb3+,Tm3+ cathode buffer layer in highly efficient inverted organic solar cells
- (2014) Chunyu Liu et al. APPLIED PHYSICS LETTERS
- A nanocomposite interconnecting layer for tandem small molecular organic photovoltaic cells
- (2014) D. Y. Luo et al. APPLIED PHYSICS LETTERS
- Highly efficient inverted organic solar cells using amino acid modified indium tin oxide as cathode
- (2014) Aiyuan Li et al. APPLIED PHYSICS LETTERS
- MoO3/Ag/Al/ZnO intermediate layer for inverted tandem polymer solar cells
- (2014) Jian Qing et al. Chinese Physics B
- Perylene diimides: a thickness-insensitive cathode interlayer for high performance polymer solar cells
- (2014) Zhi-Guo Zhang et al. Energy & Environmental Science
- Effect of π-conjugated bridges of TPD-based medium bandgap conjugated copolymers for efficient tandem organic photovoltaic cells
- (2014) Ji-Hoon Kim et al. Energy & Environmental Science
- Flexible organic tandem solar modules with 6% efficiency: combining roll-to-roll compatible processing with high geometric fill factors
- (2014) G. D. Spyropoulos et al. Energy & Environmental Science
- Solution-Processed Copper Iodide as an Inexpensive and Effective Anode Buffer Layer for Polymer Solar Cells
- (2014) Weihai Sun et al. Journal of Physical Chemistry C
- Solution-Processed and Low-Temperature Annealed CrOx as Anode Buffer Layer for Efficient Polymer Solar Cells
- (2014) Xiaohe Tu et al. Journal of Physical Chemistry C
- Universal and Versatile MoO3-Based Hole Transport Layers for Efficient and Stable Polymer Solar Cells
- (2014) Xiaotian Hu et al. Journal of Physical Chemistry C
- Graphene Oxide-Based Carbon Interconnecting Layer for Polymer Tandem Solar Cells
- (2014) Yonghua Chen et al. NANO LETTERS
- Solution-derived poly(ethylene glycol)-TiO x nanocomposite film as a universal cathode buffer layer for enhancing efficiency and stability of polymer solar cells
- (2014) Zhigang Yin et al. Nano Research
- Dye-sensitized solar cells with 13% efficiency achieved through the molecular engineering of porphyrin sensitizers
- (2014) Simon Mathew et al. Nature Chemistry
- Improved performance and stability in quantum dot solar cells through band alignment engineering
- (2014) Chia-Hao M. Chuang et al. NATURE MATERIALS
- Effect of different p-dopants in an interconnection unit on the performance of tandem organic solar cells
- (2014) Hyun-Sub Shim et al. ORGANIC ELECTRONICS
- Novel cathode buffer layer of Ag-doped bathocuproine for small molecule organic solar cell with inverted structure
- (2014) Xia Hao et al. ORGANIC ELECTRONICS
- Vacuum-deposited interconnection layers for tandem solar cells
- (2014) Yi-Hong Chen et al. ORGANIC ELECTRONICS
- Enhanced efficiency and stability of polymer solar cells with TiO2 nanoparticles buffer layer
- (2014) Jian Xiong et al. ORGANIC ELECTRONICS
- Enhancing the short-circuit current, efficiency of inverted organic solar cells using tetra sulfonic copper phthalocyanine (TS-CuPc) as electron transporting layer
- (2014) M. Raïssi et al. ORGANIC ELECTRONICS
- Highly efficient organic tandem solar cell based on SubPc:C 70 bulk heterojunction
- (2014) Fangming Jin et al. ORGANIC ELECTRONICS
- The use of UV/ozone-treated MoS2 nanosheets for extended air stability in organic photovoltaic cells
- (2014) Quyet Van Le et al. PHYSICAL CHEMISTRY CHEMICAL PHYSICS
- Fulleropyrrolidine interlayers: Tailoring electrodes to raise organic solar cell efficiency
- (2014) Zachariah A. Page et al. SCIENCE
- Exfoliated and Partially Oxidized MoS2Nanosheets by One-Pot Reaction for Efficient and Stable Organic Solar Cells
- (2014) Jin-Mun Yun et al. Small
- Enhanced efficiency in organic solar cells via in situ fabricated p-type copper sulfide as the hole transporting layer
- (2014) Hongwei Lei et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Inverted organic solar cells based on Cd-doped TiO2 as an electron extraction layer
- (2014) A. Ranjitha et al. SUPERLATTICES AND MICROSTRUCTURES
- Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
- (2014) Yuhang Liu et al. Nature Communications
- 8.4% efficient fullerene-free organic solar cells exploiting long-range exciton energy transfer
- (2014) Kjell Cnops et al. Nature Communications
- Improved Performance in Bulk Heterojunction Organic Solar Cells with a Sol-Gel MgZnO Electron-Collecting Layer
- (2014) Bradley A. MacLeod et al. Advanced Energy Materials
- Efficient Charge Extraction in Thick Bulk Heterojunction Solar Cells through Infiltrated Diffusion Doping
- (2014) Junghwan Kim et al. Advanced Energy Materials
- ITO Breakers: Highly Transparent Conducting Polymer/Metal/Dielectric (P/M/D) Films for Organic Solar Cells
- (2014) Juyoung Ham et al. Advanced Energy Materials
- High-Efficiency Inverted Polymer Photovoltaics via Spectrally Tuned Absorption Enhancement
- (2014) Stephen Loser et al. Advanced Energy Materials
- Contact Doping with Sub-Monolayers of Strong Polyelectrolytes for Organic Photovoltaics
- (2014) Gopal K. Mor et al. Advanced Energy Materials
- Decreased Recombination Through the Use of a Non-Fullerene Acceptor in a 6.4% Efficient Organic Planar Heterojunction Solar Cell
- (2014) Bregt Verreet et al. Advanced Energy Materials
- High-Performance Semitransparent Tandem Solar Cell of 8.02% Conversion Efficiency with Solution-Processed Graphene Mesh and Laminated Ag Nanowire Top Electrodes
- (2014) Abd. Rashid bin Mohd Yusoff et al. Advanced Energy Materials
- Inverted Tandem Polymer Solar Cells with Polyethylenimine-Modified MoOX/Al2O3:ZnO Nanolaminate as the Charge Recombination Layers
- (2014) Jae Won Shim et al. Advanced Energy Materials
- An Alternative Hole Transport Layer for Both ITO- and Graphene-Based Organic Solar Cells
- (2014) Hyesung Park et al. Advanced Energy Materials
- Improving Cathodes with a Polymer Interlayer in Reversed Organic Solar Cells
- (2014) Zheng Tang et al. Advanced Energy Materials
- Atomic-Layer-Deposited Aluminum and Zirconium Oxides for Surface Passivation of TiO2in High-Efficiency Organic Photovoltaics
- (2014) Maria Vasilopoulou et al. Advanced Energy Materials
- High-Efficiency Organic Photovoltaic Cells Based on the Solution-Processable Hole Transporting Interlayer Copper Thiocyanate (CuSCN) as a Replacement for PEDOT:PSS
- (2014) Nir Yaacobi-Gross et al. Advanced Energy Materials
- Environmentally Printing Efficient Organic Tandem Solar Cells with High Fill Factors: A Guideline Towards 20% Power Conversion Efficiency
- (2014) Ning Li et al. Advanced Energy Materials
- Morphological Control for Highly Efficient Inverted Polymer Solar Cells Via the Backbone Design of Cathode Interlayer Materials
- (2014) Wenjun Zhang et al. Advanced Energy Materials
- Work-Function-Tunable Chlorinated Graphene Oxide as an Anode Interface Layer in High-Efficiency Polymer Solar Cells
- (2014) Dong Yang et al. Advanced Energy Materials
- Broad Work-Function Tunability of p-Type Conjugated Polyelectrolytes for Efficient Organic Solar Cells
- (2014) Byoung Hoon Lee et al. Advanced Energy Materials
- Bandgap Tunable Zn1-xMgxO Thin Films as Highly Transparent Cathode Buffer Layers for High-Performance Inverted Polymer Solar Cells
- (2014) Zhigang Yin et al. Advanced Energy Materials
- High-Performance Inverted Organic Photovoltaics with Over 1-μm Thick Active Layers
- (2014) Xiaowen Hu et al. Advanced Energy Materials
- A General Route to Enhance Polymer Solar Cell Performance using Plasmonic Nanoprisms
- (2014) Kai Yao et al. Advanced Energy Materials
- Interplay of Optical, Morphological, and Electronic Effects of ZnO Optical Spacers in Highly Efficient Polymer Solar Cells
- (2014) Sadok Ben Dkhil et al. Advanced Energy Materials
- Interface Design to Improve the Performance and Stability of Solution-Processed Small-Molecule Conventional Solar Cells
- (2014) Jie Min et al. Advanced Energy Materials
- High-Efficiency, Vacuum-Deposited, Small-Molecule Organic Tandem and Triple-Junction Photovoltaic Cells
- (2014) Xiaozhou Che et al. Advanced Energy Materials
- 8.9% Single-Stack Inverted Polymer Solar Cells with Electron-Rich Polymer Nanolayer-Modified Inorganic Electron-Collecting Buffer Layers
- (2014) Sungho Woo et al. Advanced Energy Materials
- Overcoming the Light-Soaking Problem in Inverted Polymer Solar Cells by Introducing a Heavily Doped Titanium Sub-Oxide Functional Layer
- (2014) Geunjin Kim et al. Advanced Energy Materials
- Role of additional PCBM layer between ZnO and photoactive layers in inverted bulk-heterojunction solar cells
- (2014) Shinuk Cho et al. Scientific Reports
- High performance polymer solar cells with as-prepared zirconium acetylacetonate film as cathode buffer layer
- (2014) Zhan'ao Tan et al. Scientific Reports
- Ultrathin Polyaniline-based Buffer Layer for Highly Efficient Polymer Solar Cells with Wide Applicability
- (2014) Wenchao Zhao et al. Scientific Reports
- Single Junction Inverted Polymer Solar Cell Reaching Power Conversion Efficiency 10.31% by Employing Dual-Doped Zinc Oxide Nano-Film as Cathode Interlayer
- (2014) Sih-Hao Liao et al. Scientific Reports
- Interface Modification of ZnO-Based Inverted PTB7:PC71BM Organic Solar Cells by Cesium Stearate and Simultaneous Enhancement of Device Parameters
- (2014) Guojie Wang et al. ACS Sustainable Chemistry & Engineering
- Environmentally friendly biomaterials as an interfacial layer for highly efficient and air-stable inverted organic solar cells
- (2014) Riming Nie et al. Journal of Materials Chemistry A
- A universal method to form the equivalent ohmic contact for efficient solution-processed organic tandem solar cells
- (2014) Ning Li et al. Journal of Materials Chemistry A
- Efficient and stable polymer solar cells with annealing-free solution-processible NiO nanoparticles as anode buffer layers
- (2014) Jun Zhang et al. Journal of Materials Chemistry C
- Flexible silver grid/PEDOT:PSS hybrid electrodes for large area inverted polymer solar cells
- (2014) Lin Mao et al. Nano Energy
- The effect of SrTiO3:ZnO as cathodic buffer layer for inverted polymer solar cells
- (2014) Jo-Lin Lan et al. Nano Energy
- Inverted organic photovoltaic device with a new electron transport layer
- (2014) Hyeong Kim et al. Nanoscale Research Letters
- Origin of Work Function Modification by Ionic and Amine-Based Interface Layers
- (2014) Stephan van Reenen et al. Advanced Materials Interfaces
- High-Volume Processed, ITO-Free Superstrates and Substrates for Roll-to-Roll Development of Organic Electronics
- (2014) Markus Hösel et al. Advanced Science
- Kelvin Probe Force Microscopic Imaging of the Energy Barrier and Energetically Favorable Offset of Interfaces in Double-Junction Organic Solar Cells
- (2013) Mahbube K. Siddiki et al. ACS Applied Materials & Interfaces
- Solution-Processed Fe3O4 Magnetic Nanoparticle Thin Film Aligned by an External Magnetostatic Field as a Hole Extraction Layer for Polymer Solar Cells
- (2013) Kai Wang et al. ACS Applied Materials & Interfaces
- Carrier Lifetime Extension via the Incorporation of Robust Hole/Electron Blocking Layers in Bulk Heterojunction Polymer Solar Cells
- (2013) Youngwoon Yoon et al. ACS Applied Materials & Interfaces
- Solution Processed ZnO Hybrid Nanocomposite with Tailored Work Function for Improved Electron Transport Layer in Organic Photovoltaic Devices
- (2013) Yun-Ju Lee et al. ACS Applied Materials & Interfaces
- Solution-Processed Nanocomposites Containing Molybdenum Oxide and Gold Nanoparticles as Anode Buffer Layers in Plasmonic-Enhanced Organic Photovoltaic Devices
- (2013) Kim-Shih Tan et al. ACS Applied Materials & Interfaces
- Interface Control of Semiconducting Metal Oxide Layers for Efficient and Stable Inverted Polymer Solar Cells with Open-Circuit Voltages over 1.0 Volt
- (2013) Zhigang Yin et al. ACS Applied Materials & Interfaces
- Solution-Processed MoSxas an Efficient Anode Buffer Layer in Organic Solar Cells
- (2013) Xiaodong Li et al. ACS Applied Materials & Interfaces
- Development of Inverted Organic Solar Cells with TiO2 Interface Layer by Using Low-Temperature Atomic Layer Deposition
- (2013) Zhenhua Lin et al. ACS Applied Materials & Interfaces
- Highly Efficient Organic Photovoltaics via Incorporation of Solution-Processed Cesium Stearate as the Cathode Interfacial Layer
- (2013) Guojie Wang et al. ACS Applied Materials & Interfaces
- Improving Efficiency by Hybrid TiO2 Nanorods with 1,10-Phenanthroline as A Cathode Buffer Layer for Inverted Organic Solar Cells
- (2013) Chunming Sun et al. ACS Applied Materials & Interfaces
- Cesium Carbonate Functionalized Graphene Quantum Dots as Stable Electron-Selective Layer for Improvement of Inverted Polymer Solar Cells
- (2013) Hong Bin Yang et al. ACS Applied Materials & Interfaces
- Noncovalent Functionalization of Graphene Attaching [6,6]-Phenyl-C61-butyric Acid Methyl Ester (PCBM) and Application as Electron Extraction Layer of Polymer Solar Cells
- (2013) Shuxuan Qu et al. ACS Nano
- Highly Efficient Inverted Organic Solar Cells Through Material and Interfacial Engineering of Indacenodithieno[3,2-b]thiophene-Based Polymers and Devices
- (2013) Jeremy J. Intemann et al. ADVANCED FUNCTIONAL MATERIALS
- Enhanced Charge-Carrier Injection and Collection Via Lamination of Doped Polymer Layers p-Doped with a Solution-Processible Molybdenum Complex
- (2013) An Dai et al. ADVANCED FUNCTIONAL MATERIALS
- Solution-Processed Nickel Oxide Hole Transport Layers in High Efficiency Polymer Photovoltaic Cells
- (2013) Jesse R. Manders et al. ADVANCED FUNCTIONAL MATERIALS
- 8.91% Power Conversion Efficiency for Polymer Tandem Solar Cells
- (2013) Abd. Rashid bin Mohd Yusoff et al. ADVANCED FUNCTIONAL MATERIALS
- A Versatile Fluoro-Containing Low-Bandgap Polymer for Efficient Semitransparent and Tandem Polymer Solar Cells
- (2013) Chih-Yu Chang et al. ADVANCED FUNCTIONAL MATERIALS
- Work Function Tuning for High-Performance Solution-Processed Organic Photodetectors with Inverted Structure
- (2013) Emeline Saracco et al. ADVANCED MATERIALS
- 10.2% Power Conversion Efficiency Polymer Tandem Solar Cells Consisting of Two Identical Sub-Cells
- (2013) Jingbi You et al. ADVANCED MATERIALS
- Low-Temperature Solution-Processed Hydrogen Molybdenum and Vanadium Bronzes for an Efficient Hole-Transport Layer in Organic Electronics
- (2013) Fengxian Xie et al. ADVANCED MATERIALS
- Amine-Based Polar Solvent Treatment for Highly Efficient Inverted Polymer Solar Cells
- (2013) Bo Ram Lee et al. ADVANCED MATERIALS
- Efficient Solution-Processed Small-Molecule Solar Cells with Inverted Structure
- (2013) Aung Ko Ko Kyaw et al. ADVANCED MATERIALS
- Enhanced Efficiency of Single and Tandem Organic Solar Cells Incorporating a Diketopyrrolopyrrole-Based Low-Bandgap Polymer by Utilizing Combined ZnO/Polyelectrolyte Electron-Transport Layers
- (2013) Jang Jo et al. ADVANCED MATERIALS
- Recent Advances in Polymer Solar Cells: Realization of High Device Performance by Incorporating Water/Alcohol-Soluble Conjugated Polymers as Electrode Buffer Layer
- (2013) Zhicai He et al. ADVANCED MATERIALS
- Fullerene Derivative-Doped Zinc Oxide Nanofilm as the Cathode of Inverted Polymer Solar Cells with Low-Bandgap Polymer (PTB7-Th) for High Performance
- (2013) Sih-Hao Liao et al. ADVANCED MATERIALS
- Transferable Graphene Oxide by Stamping Nanotechnology: Electron-Transport Layer for Efficient Bulk-Heterojunction Solar Cells
- (2013) Dong Hwan Wang et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- Ligand chemistry of titania precursor affects transient photovoltaic behavior in inverted organic solar cells
- (2013) Jong Bok Kim et al. APPLIED PHYSICS LETTERS
- Highly efficient inverted polymer solar cells with reduced graphene-oxide-zinc-oxide nanocomposites buffer layer
- (2013) Hyun Woo Lee et al. APPLIED PHYSICS LETTERS
- Small molecule-based tandem solar cells with solution-processed and vacuum-processed photoactive layers
- (2013) Werther Cambarau et al. CHEMICAL COMMUNICATIONS
- Solution-processed amorphous niobium oxide as a novel electron collection layer for inverted polymer solar cells
- (2013) Keisuke Hamada et al. CHEMICAL PHYSICS LETTERS
- Nanoscale Dispersions of Gelled SnO2: Material Properties and Device Applications
- (2013) Brion Bob et al. CHEMISTRY OF MATERIALS
- Self-Organized Hole Transport Layers Based on Polythiophene Diblock Copolymers for Inverted Organic Solar Cells with High Efficiency
- (2013) Kai Yao et al. CHEMISTRY OF MATERIALS
- Thieno[3,2-b]thiophene-Substituted Benzo[1,2-b:4,5-b′]dithiophene as a Promising Building Block for Low Bandgap Semiconducting Polymers for High-Performance Single and Tandem Organic Photovoltaic Cells
- (2013) Ji-Hoon Kim et al. CHEMISTRY OF MATERIALS
- Efficient inverted organic solar cells using Zn-doped titanium oxide films as electron transport layers
- (2013) Shanshan Yuan et al. ELECTROCHIMICA ACTA
- Enhanced electron collection in inverted organic solar cells using titanium oxide/reduced graphene oxide composite films as electron collecting layers
- (2013) Yang Zhang et al. ELECTROCHIMICA ACTA
- Low-temperature, solution-processed, layered V2O5 hydrate as the hole-transport layer for stable organic solar cells
- (2013) Gerardo Terán-Escobar et al. Energy & Environmental Science
- Triple junction polymer solar cells
- (2013) Olusegun Adebanjo et al. Energy & Environmental Science
- Highly efficient organic tandem solar cells: a follow up review
- (2013) Tayebeh Ameri et al. Energy & Environmental Science
- In situ doping and crosslinking of fullerenes to form efficient and robust electron-transporting layers for polymer solar cells
- (2013) Namchul Cho et al. Energy & Environmental Science
- Graphene oxide derivatives as hole- and electron-extraction layers for high-performance polymer solar cells
- (2013) Jun Liu et al. Energy & Environmental Science
- Development of Large Band-Gap Conjugated Copolymers for Efficient Regular Single and Tandem Organic Solar Cells
- (2013) Kai Li et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- Efficient Tandem and Triple-Junction Polymer Solar Cells
- (2013) Weiwei Li et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- High-Efficiency Polymer Solar Cells via the Incorporation of an Amino-Functionalized Conjugated Metallopolymer as a Cathode Interlayer
- (2013) Shengjian Liu et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- Properties of interlayer for organic photovoltaics
- (2013) Tzung-Han Lai et al. Materials Today
- Extremely stable all solution processed organic tandem solar cells with TiO2/GO recombination layer under continuous light illumination
- (2013) Abd. Rashid bin Mohd Yusoff et al. Nanoscale
- Plasmonic organic photovoltaic devices with graphene based buffer layers for stability and efficiency enhancement
- (2013) Emmanuel Stratakis et al. Nanoscale
- Transparent flexible organic solar cells with 6.87% efficiency manufactured by an all-solution process
- (2013) Wilson Jose da Silva et al. Nanoscale
- Assembly and organization of poly(3-hexylthiophene) brushes and their potential use as novel anode buffer layers for organic photovoltaics
- (2013) José Alonzo et al. Nanoscale
- Gold nanoparticle-decorated graphene oxides for plasmonic-enhanced polymer photovoltaic devices
- (2013) Ming-Kai Chuang et al. Nanoscale
- Tuning indium tin oxide work function with solution-processed alkali carbonate interfacial layers for high-efficiency inverted organic photovoltaic cells
- (2013) Fei Chen et al. NANOTECHNOLOGY
- Low temperature, solution-processed alumina for organic solar cells
- (2013) Jun Peng et al. NANOTECHNOLOGY
- Efficient planar heterojunction perovskite solar cells by vapour deposition
- (2013) Mingzhen Liu et al. NATURE
- Device stability of inverted and conventional bulk heterojunction solar cells with MoO3 and ZnO nanoparticles as charge transport layers
- (2013) Souvik Kundu et al. ORGANIC ELECTRONICS
- MoO3–Au composite interfacial layer for high efficiency and air-stable organic solar cells
- (2013) Hongbin Pan et al. ORGANIC ELECTRONICS
- An X-ray fluorescence study on the segregation of Cs and I in an inverted organic solar cell
- (2013) William R. Lindemann et al. ORGANIC ELECTRONICS
- Power conversion efficiency enhancement of organic solar cells by addition of gold nanostars, nanorods, and nanospheres
- (2013) Duygu Kozanoglu et al. ORGANIC ELECTRONICS
- Improved power conversion efficiency by insertion of RGO–TiO2 composite layer as optical spacer in polymer bulk heterojunction solar cells
- (2013) G.D. Sharma et al. ORGANIC ELECTRONICS
- Growth of vertically aligned ZnO nanowalls for inverted polymer solar cells
- (2013) Zhiqiang Liang et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Organic solar cells using a reduced graphene oxide anode buffer layer
- (2013) Hyeong Pil Kim et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Improvement in power conversion efficiency and long-term lifetime of organic photovoltaic cells by using bathophenanthroline/molybdenum oxide as compound cathode buffer layer
- (2013) Fangming Jin et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Influences of dopant concentration in sol–gel derived AZO layer on the performance of P3HT:PCBM based inverted solar cell
- (2013) Annisa Aprilia et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Graphene quantum dots-incorporated cathode buffer for improvement of inverted polymer solar cells
- (2013) Hong Bin Yang et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- High-efficiency inverted tandem polymer solar cells with step-Al-doped MoO3 interconnection layer
- (2013) Jian Liu et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Solution-processable bismuth iodide nanosheets as hole transport layers for organic solar cells
- (2013) Karunakara Moorthy Boopathi et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Large active area inverted tandem polymer solar cell with high performance via insertion of subnano-scale silver layer
- (2013) Po-Nan Yeh et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Design of intermediate layers for solution-processed tandem organic solar cells: Guidelines from a case study on TiOx and ZnO
- (2013) Balthazar Lechêne et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Multi-wall carbon nanotube coating of fluorine-doped tin oxide as an electrode surface modifier for polymer solar cells
- (2013) A. Capasso et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Characteristics of a ZnTiO and ITO cathode-integrated electrodes for inverted organic solar cells
- (2013) Sin-Bi Kang et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- A polymer tandem solar cell with 10.6% power conversion efficiency
- (2013) Jingbi You et al. Nature Communications
- Improved Performance and Stability of Inverted Organic Solar Cells with Sol-Gel Processed, Amorphous Mixed Metal Oxide Electron Extraction Layers Comprising Alkaline Earth Metals
- (2013) Olympia Pachoumi et al. Advanced Energy Materials
- Solution-Processed Hydrogen Molybdenum Bronzes as Highly Conductive Anode Interlayers in Efficient Organic Photovoltaics
- (2013) Anastasia Soultati et al. Advanced Energy Materials
- Greatly Reduced Processing Temperature for a Solution-Processed NiOxBuffer Layer in Polymer Solar Cells
- (2013) Zhichun Zhai et al. Advanced Energy Materials
- Linking Vertical Bulk-Heterojunction Composition and Transient Photocurrent Dynamics in Organic Solar Cells with Solution-Processed MoOxContact Layers
- (2013) Bertrand J. Tremolet de Villers et al. Advanced Energy Materials
- Solution-Processed (Graphene Oxide)-(d0Transition Metal Oxide) Composite Anodic Buffer Layers toward High-Performance and Durable Inverted Polymer Solar Cells
- (2013) Yi-Hsiang Chao et al. Advanced Energy Materials
- Solution-Processed Rhenium Oxide: A Versatile Anode Buffer Layer for High Performance Polymer Solar Cells with Enhanced Light Harvest
- (2013) Zhan'ao Tan et al. Advanced Energy Materials
- Highly Efficient Polymer Tandem Cells and Semitransparent Cells for Solar Energy
- (2013) Chih-Yu Chang et al. Advanced Energy Materials
- A Solution-Processed Hole Extraction Layer Made from Ultrathin MoS2Nanosheets for Efficient Organic Solar Cells
- (2013) Xing Gu et al. Advanced Energy Materials
- A Depletion-Free, Ionic, Self-Assembled Recombination Layer for Tandem Polymer Solar Cells
- (2013) Jinho Lee et al. Advanced Energy Materials
- Enhanced Device Efficiency of Bilayered Inverted Organic Solar Cells Based on Photocurable P3HTs with a Light-Harvesting ZnO Nanorod Array
- (2013) Sehwan Kim et al. Advanced Energy Materials
- An Efficient Solution-Processed Intermediate Layer for Facilitating Fabrication of Organic Multi-Junction Solar Cells
- (2013) Ning Li et al. Advanced Energy Materials
- Low-Temperature Combustion-Synthesized Nickel Oxide Thin Films as Hole-Transport Interlayers for Solution-Processed Optoelectronic Devices
- (2013) Sai Bai et al. Advanced Energy Materials
- High quantity and quality few-layers transition metal disulfide nanosheets from wet-milling exfoliation
- (2013) Mohammed Aziz Ibrahem et al. RSC Advances
- Plasmonic Forward Scattering Effect in Organic Solar Cells: A Powerful Optical Engineering Method
- (2013) Se-Woong Baek et al. Scientific Reports
- Barium: An Efficient Cathode Layer for Bulk-heterojunction Solar Cells
- (2013) Vinay Gupta et al. Scientific Reports
- Solution-processed small-molecule solar cells: breaking the 10% power conversion efficiency
- (2013) Yongsheng Liu et al. Scientific Reports
- Overcoming interface losses in organic solar cells by applying low temperature, solution processed aluminum-doped zinc oxide electron extraction layers
- (2013) Tobias Stubhan et al. Journal of Materials Chemistry A
- New solution-processable small molecules as hole-transporting layer in efficient polymer solar cells
- (2013) Kunyuan Lu et al. Journal of Materials Chemistry A
- Pyridinium salt-based molecules as cathode interlayers for enhanced performance in polymer solar cells
- (2013) Hua Ye et al. Journal of Materials Chemistry A
- Amine group functionalized fullerene derivatives as cathode buffer layers for high performance polymer solar cells
- (2013) Zhi-Guo Zhang et al. Journal of Materials Chemistry A
- Significance of the ZnO nanorod array morphology for low-bandgap polymer solar cells in inverted structures
- (2013) Shao-Hsuan Kao et al. Journal of Materials Chemistry A
- Facile preparation of TiOXfilm as an interface material for efficient inverted polymer solar cells
- (2013) Xichang Bao et al. Journal of Materials Chemistry A
- Efficient polymer solar cells with a solution-processed and thermal annealing-free RuO2anode buffer layer
- (2013) Fuzhi Wang et al. Journal of Materials Chemistry A
- Room temperature solution processed tungsten carbide as an efficient hole extraction layer for organic photovoltaics
- (2013) Wei Cui et al. Journal of Materials Chemistry A
- In situ growth of double-layer MoO3/MoS2 film from MoS2 for hole-transport layers in organic solar cell
- (2013) Pingli Qin et al. Journal of Materials Chemistry A
- Hydrogenated under-stoichiometric tungsten oxide anode interlayers for efficient and stable organic photovoltaics
- (2013) M. Vasilopoulou et al. Journal of Materials Chemistry A
- High performance inverted organic solar cells with solution processed Ga-doped ZnO as an interfacial electron transport layer
- (2013) M. Thambidurai et al. Journal of Materials Chemistry C
- Surface plasmon enhancement of polymer solar cells by penetrating Au/SiO2 core/shell nanoparticles into all organic layers
- (2013) Boxue Chen et al. Nano Energy
- Molecular Design of Photovoltaic Materials for Polymer Solar Cells: Toward Suitable Electronic Energy Levels and Broad Absorption
- (2012) Yongfang Li ACCOUNTS OF CHEMICAL RESEARCH
- High-Efficiency Inverted Polymer Solar Cells with Double Interlayer
- (2012) Jegadesan Subbiah et al. ACS Applied Materials & Interfaces
- Highly Efficient, Inverted Polymer Solar Cells with Indium Tin Oxide Modified with Solution-Processed Zwitterions as the Transparent Cathode
- (2012) Kuan Sun et al. ACS Applied Materials & Interfaces
- Enhanced Performance of Inverted Polymer Solar Cells by Using Poly(ethylene oxide)-Modified ZnO as an Electron Transport Layer
- (2012) Shuyan Shao et al. ACS Applied Materials & Interfaces
- A Solution-Processed MoOx Anode Interlayer for Use within Organic Photovoltaic Devices
- (2012) Jacek J. Jasieniak et al. ADVANCED FUNCTIONAL MATERIALS
- Oriented Growth of Al2O3:ZnO Nanolaminates for Use as Electron-Selective Electrodes in Inverted Polymer Solar Cells
- (2012) Hyeunseok Cheun et al. ADVANCED FUNCTIONAL MATERIALS
- Effects of the Morphology of a ZnO Buffer Layer on the Photovoltaic Performance of Inverted Polymer Solar Cells
- (2012) Zhiqiang Liang et al. ADVANCED FUNCTIONAL MATERIALS
- High-Efficiency Inverted Polymer Solar Cells with Transparent and Work-Function Tunable MoO3-Al Composite Film as Cathode Buffer Layer
- (2012) Jian Liu et al. ADVANCED MATERIALS
- Hole and Electron Extraction Layers Based on Graphene Oxide Derivatives for High-Performance Bulk Heterojunction Solar Cells
- (2012) Jun Liu et al. ADVANCED MATERIALS
- High Efficiency Inorganic/Organic Hybrid Tandem Solar Cells
- (2012) Ji Hoon Seo et al. ADVANCED MATERIALS
- Electrostatically Self-Assembled Nonconjugated Polyelectrolytes as an Ideal Interfacial Layer for Inverted Polymer Solar Cells
- (2012) Hongkyu Kang et al. ADVANCED MATERIALS
- High-Performance Inverted Polymer Solar Cells with Solution-Processed Titanium Chelate as Electron-Collecting Layer on ITO Electrode
- (2012) Zhan'ao Tan et al. ADVANCED MATERIALS
- Dual Plasmonic Nanostructures for High Performance Inverted Organic Solar Cells
- (2012) Xuanhua Li et al. ADVANCED MATERIALS
- Metal Oxide Nanoparticles as an Electron-Transport Layer in High-Performance and Stable Inverted Polymer Solar Cells
- (2012) Jingbi You et al. ADVANCED MATERIALS
- Very high open-circuit voltage of 5.89 V in organic solar cells with 10-fold-tandem structure
- (2012) Ye Zou et al. APPLIED PHYSICS LETTERS
- Tandem organic photovoltaics using both solution and vacuum deposited small molecules
- (2012) Brian E. Lassiter et al. APPLIED PHYSICS LETTERS
- Enhancement of inverted polymer solar cells with solution-processed ZnO-TiOX composite as cathode buffer layer
- (2012) Jian Liu et al. APPLIED PHYSICS LETTERS
- Conformal coating of titanium suboxide on carbon nanotube networks by atomic layer deposition for inverted organic photovoltaic cells
- (2012) Sung H. Jin et al. CARBON
- Towards fabrication of high-performing organic photovoltaics: new donor-polymer, atomic layer deposited thin buffer layer and plasmonic effects
- (2012) Dong Chan Lim et al. Energy & Environmental Science
- High performance polymeric charge recombination layer for organic tandem solar cells
- (2012) Yinhua Zhou et al. Energy & Environmental Science
- Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells
- (2012) Hin-Lap Yip et al. Energy & Environmental Science
- Room-temperature solution processed SnOx as an electron extraction layer for inverted organic solar cells with superior thermal stability
- (2012) Sara Trost et al. JOURNAL OF MATERIALS CHEMISTRY
- Role of transition metal oxides in the charge recombination layer used in tandem organic photovoltaic cells
- (2012) Jian Li et al. JOURNAL OF MATERIALS CHEMISTRY
- Metal oxides for interface engineering in polymer solar cells
- (2012) Song Chen et al. JOURNAL OF MATERIALS CHEMISTRY
- Understanding S-Shaped Current–Voltage Characteristics in Organic Solar Cells Containing a TiOx Interlayer with Impedance Spectroscopy and Equivalent Circuit Analysis
- (2012) Bernhard Ecker et al. Journal of Physical Chemistry C
- Fluorinated Copper Phthalocyanine Nanowires for Enhancing Interfacial Electron Transport in Organic Solar Cells
- (2012) Seok Min Yoon et al. NANO LETTERS
- Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer
- (2012) Letian Dou et al. Nature Photonics
- Polymer solar cells
- (2012) Gang Li et al. Nature Photonics
- CdSe quantum dot cathode buffer for inverted organic bulk hetero-junction solar cells
- (2012) Yeon-Il Lee et al. ORGANIC ELECTRONICS
- Efficient inverted polymer solar cells incorporating doped organic electron transporting layer
- (2012) Zai-Quan Xu et al. ORGANIC ELECTRONICS
- Zinc Tin Oxide (ZTO) electron transporting buffer layer in inverted organic solar cell
- (2012) Than Zaw Oo et al. ORGANIC ELECTRONICS
- Solution processable, precursor based zinc oxide buffer layers for 4.5% efficient organic tandem solar cells
- (2012) Andreas Puetz et al. ORGANIC ELECTRONICS
- Inverted polymer solar cells with a solution-processed cesium halide interlayer
- (2012) Teng Xiao et al. ORGANIC ELECTRONICS
- Optimization of thermally reduced graphene oxide for an efficient hole transport layer in polymer solar cells
- (2012) Xiaodong Liu et al. ORGANIC ELECTRONICS
- Nb2O5 as a new electron transport layer for double junction polymer solar cells
- (2012) Mahbube K. Siddiki et al. PHYSICAL CHEMISTRY CHEMICAL PHYSICS
- Efficient polymer bulk heterojunction solar cells with cesium acetate as the cathode interfacial layer
- (2012) Yuehua Jia et al. RENEWABLE ENERGY
- A Universal Method to Produce Low-Work Function Electrodes for Organic Electronics
- (2012) Y. Zhou et al. SCIENCE
- Studies of the optimization of recombination layers for inverted tandem polymer solar cells
- (2012) Jae Won Shim et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Inverted organic solar cells with TiOx cathode and graphene oxide anode buffer layers
- (2012) Abd. Rashid bin Mohd Yusoff et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Inverted Polymer Solar Cells with Reduced Interface Recombination
- (2012) Song Chen et al. Advanced Energy Materials
- Design of the Solution-Processed Intermediate Layer by Engineering for Inverted Organic Multi junction Solar Cells
- (2012) Ning Li et al. Advanced Energy Materials
- High Fill Factor Polymer Solar Cells Incorporating a Low Temperature Solution Processed WO3Hole Extraction Layer
- (2012) Tobias Stubhan et al. Advanced Energy Materials
- Toward High-Stability Inverted Polymer Solar Cells with an Electrodeposited ZnO Electron Transporting Layer
- (2012) Sylvia Sanchez et al. Advanced Energy Materials
- In Situ Formation of MoO3in PEDOT:PSS Matrix: A Facile Way to Produce a Smooth and Less Hygroscopic Hole Transport Layer for Highly Stable Polymer Bulk Heterojunction Solar Cells
- (2012) Shuyan Shao et al. Advanced Energy Materials
- Graphene Oxide:Single-Walled Carbon Nanotube-Based Interfacial Layer for All-Solution-Processed Multijunction Solar Cells in Both Regular and Inverted Geometries
- (2012) Vincent C. Tung et al. Advanced Energy Materials
- Efficient Inverted Tandem Polymer Solar Cells with a Solution-Processed Recombination Layer
- (2012) Sandra Kouijzer et al. Advanced Energy Materials
- Efficient and stable polymer solar cells with solution-processed molybdenum oxide interfacial layer
- (2012) Zhan'ao Tan et al. Journal of Materials Chemistry A
- Inverted Organic Solar Cells with Sol-Gel Processed High Work-Function Vanadium Oxide Hole-Extraction Layers
- (2011) Kirill Zilberberg et al. ADVANCED FUNCTIONAL MATERIALS
- Graphene Intermediate Layer in Tandem Organic Photovoltaic Cells
- (2011) Shi Wun Tong et al. ADVANCED FUNCTIONAL MATERIALS
- Simultaneous Enhancement of Open-Circuit Voltage, Short-Circuit Current Density, and Fill Factor in Polymer Solar Cells
- (2011) Zhicai He et al. ADVANCED MATERIALS
- Inverted Polymer Solar Cells Integrated with a Low-Temperature-Annealed Sol-Gel-Derived ZnO Film as an Electron Transport Layer
- (2011) Yanming Sun et al. ADVANCED MATERIALS
- A Robust Inter-Connecting Layer for Achieving High Performance Tandem Polymer Solar Cells
- (2011) Jun Yang et al. ADVANCED MATERIALS
- Combination of Titanium Oxide and a Conjugated Polyelectrolyte for High-Performance Inverted-Type Organic Optoelectronic Devices
- (2011) Hyosung Choi et al. ADVANCED MATERIALS
- Stability of Polymer Solar Cells
- (2011) Mikkel Jørgensen et al. ADVANCED MATERIALS
- Influence of surface roughness of aluminum-doped zinc oxide buffer layers on the performance of inverted organic solar cells
- (2011) Sung-Woo Cho et al. APPLIED PHYSICS LETTERS
- Applications of ZnO in organic and hybrid solar cells
- (2011) Jia Huang et al. Energy & Environmental Science
- Sticky Interconnect for Solution-Processed Tandem Solar Cells
- (2011) Vincent C. Tung et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- Efficiency enhancement in organic solar cells with ferroelectric polymers
- (2011) Yongbo Yuan et al. NATURE MATERIALS
- High-efficiency inverted dithienogermole–thienopyrrolodione-based polymer solar cells
- (2011) Cephas E. Small et al. Nature Photonics
- Inverted organic solar cells using a solution processed aluminum-doped zinc oxide buffer layer
- (2011) Tobias Stubhan et al. ORGANIC ELECTRONICS
- Comparison of various sol–gel derived metal oxide layers for inverted organic solar cells
- (2011) Hyunchul Oh et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Controlled Synthesis and Energy Applications of One-Dimensional Conducting Polymer Nanostructures: An Overview
- (2011) Zhigang Yin et al. Advanced Energy Materials
- A New Class of Semiconducting Polymers for Bulk Heterojunction Solar Cells with Exceptionally High Performance
- (2010) Yongye Liang et al. ACCOUNTS OF CHEMICAL RESEARCH
- Enhanced Performance in Polymer Solar Cells by Surface Energy Control
- (2010) Xavier Bulliard et al. ADVANCED FUNCTIONAL MATERIALS
- Interface Engineering for Organic Electronics
- (2010) Hong Ma et al. ADVANCED FUNCTIONAL MATERIALS
- A Metal-Oxide Interconnection Layer for Polymer Tandem Solar Cells with an Inverted Architecture
- (2010) Cheng-Hsuan Chou et al. ADVANCED MATERIALS
- For the Bright Future-Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4%
- (2010) Yongye Liang et al. ADVANCED MATERIALS
- Inverted tandem organic solar cells with a MoO3/Ag/Al/Ca intermediate layer
- (2010) X. W. Sun et al. APPLIED PHYSICS LETTERS
- High-efficiency inverted bulk heterojunction polymer solar cells with UV ozone-treated ultrathin aluminum interlayer
- (2010) Hongmei Zhang et al. APPLIED PHYSICS LETTERS
- Inverted ITO-free organic solar cells based on p and n semiconducting oxides. New designs for integration in tandem cells, top or bottom detecting devices, and photovoltaic windows
- (2010) Jon Ajuria et al. Energy & Environmental Science
- The role of buffer layers in polymer solar cells
- (2010) Riccardo Po et al. Energy & Environmental Science
- Inverted organic solar cells with ITO electrodes modified with an ultrathin Al2O3 buffer layer deposited by atomic layer deposition
- (2010) Yinhua Zhou et al. JOURNAL OF MATERIALS CHEMISTRY
- Interface investigation and engineering – achieving high performance polymer photovoltaic devices
- (2010) Li-Min Chen et al. JOURNAL OF MATERIALS CHEMISTRY
- Enhanced Power Conversion Efficiency of Inverted Organic Solar Cells with a Ga-Doped ZnO Nanostructured Thin Film Prepared Using Aqueous Solution
- (2010) Kyung-Sik Shin et al. Journal of Physical Chemistry C
- Plasmonics for improved photovoltaic devices
- (2010) Harry A. Atwater et al. NATURE MATERIALS
- Low work function metal modified ITO as cathode for inverted polymer solar cells
- (2010) Chang Yun Jiang et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Organic solar cells incorporating buffer layers from indium doped zinc oxide nanoparticles
- (2010) Andreas Puetz et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Highly Efficient Tandem Polymer Photovoltaic Cells
- (2009) Srinivas Sista et al. ADVANCED MATERIALS
- Optimizing Polymer Tandem Solar Cells
- (2009) Jan Gilot et al. ADVANCED MATERIALS
- The effect of molybdenum oxide interlayer on organic photovoltaic cells
- (2009) Do Young Kim et al. APPLIED PHYSICS LETTERS
- An inverted organic solar cell with an ultrathin Ca electron-transporting layer and MoO3 hole-transporting layer
- (2009) D. W. Zhao et al. APPLIED PHYSICS LETTERS
- Organic tandem solar cells: A review
- (2009) Tayebeh Ameri et al. Energy & Environmental Science
- Highly efficient flexible inverted organic solar cells using atomic layer deposited ZnO as electron selective layer
- (2009) Jen-Chun Wang et al. JOURNAL OF MATERIALS CHEMISTRY
- Bulk heterojunction solar cells with internal quantum efficiency approaching 100%
- (2009) Sung Heum Park et al. Nature Photonics
- Solution processed polymer tandem cell utilizing organic layer coated nano-crystalline TiO2 as interlayer
- (2009) Won-Suk Chung et al. ORGANIC ELECTRONICS
- Efficient organic photovoltaic tandem cells with novel transparent conductive oxide interlayer and poly (3-hexylthiophene): Fullerene active layers
- (2009) Jun Sakai et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- On the Role of Bathocuproine in Organic Photovoltaic Cells
- (2008) Hans Gommans et al. ADVANCED FUNCTIONAL MATERIALS
- Self-Organized Buffer Layers in Organic Solar Cells
- (2008) Qingshuo Wei et al. ADVANCED MATERIALS
- Design Rules for Donors in Bulk-Heterojunction Tandem Solar Cells?Towards 15 % Energy-Conversion Efficiency
- (2008) G. Dennler et al. ADVANCED MATERIALS
- A Semi-transparent Plastic Solar Cell Fabricated by a Lamination Process
- (2008) J. Huang et al. ADVANCED MATERIALS
- Optimal negative electrodes for poly(3-hexylthiophene): [6,6]-phenyl C61-butyric acid methyl ester bulk heterojunction photovoltaic devices
- (2008) Matthew O. Reese et al. APPLIED PHYSICS LETTERS
- Stability/degradation of polymer solar cells
- (2008) Mikkel Jørgensen et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search