- Home
- Publications
- Publication Search
- Publication Details
Title
Multiprocess 3D printing for increasing component functionality
Authors
Keywords
-
Journal
SCIENCE
Volume 353, Issue 6307, Pages aaf2093-aaf2093
Publisher
American Association for the Advancement of Science (AAAS)
Online
2016-09-30
DOI
10.1126/science.aaf2093
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Infill-Dependent 3-D-Printed Material Based on NinjaFlex Filament for Antenna Applications
- (2016) Stefano Moscato et al. IEEE Antennas and Wireless Propagation Letters
- 3-D Printed Microwave Patch Antenna via Fused Deposition Method and Ultrasonic Wire Mesh Embedding Technique
- (2015) Min Liang et al. IEEE Antennas and Wireless Propagation Letters
- Fabrication and Microwave Characterization of 3-D Printed Transmission Lines
- (2015) Paul I. Deffenbaugh et al. IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS
- Encapsulated Copper Wire and Copper Mesh Capacitive Sensing for 3-D Printing Applications
- (2015) Corey Shemelya et al. IEEE SENSORS JOURNAL
- A 2.45 GHz Phased Array Antenna Unit Cell Fabricated Using 3-D Multi-Layer Direct Digital Manufacturing
- (2015) Thomas P. Ketterl et al. IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES
- Mechanical, Electromagnetic, and X-ray Shielding Characterization of a 3D Printable Tungsten–Polycarbonate Polymer Matrix Composite for Space-Based Applications
- (2015) Corey M. Shemelya et al. JOURNAL OF ELECTRONIC MATERIALS
- Three-dimensional printed electronics
- (2015) Jennifer A. Lewis et al. NATURE
- Spatially variant periodic structures in electromagnetics
- (2015) Raymond C. Rumpf et al. PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
- Printing Three-Dimensional Electrical Traces in Additive Manufactured Parts for Injection of Low Melting Temperature Metals
- (2015) John P. Swensen et al. Journal of Mechanisms and Robotics-Transactions of the ASME
- Fiber Encapsulation Additive Manufacturing: An Enabling Technology for 3D Printing of Electromechanical Devices and Robotic Components
- (2015) Matt Saari et al. 3D Printing and Additive Manufacturing
- Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
- (2014) Joseph T. Muth et al. ADVANCED MATERIALS
- Three dimensional (3D) printed electrodes for interdigitated supercapacitors
- (2014) Chen Zhao et al. ELECTROCHEMISTRY COMMUNICATIONS
- A 3-D Luneburg Lens Antenna Fabricated by Polymer Jetting Rapid Prototyping
- (2014) Min Liang et al. IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION
- 3D Printing multifunctionality: structures with electronics
- (2014) David Espalin et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A compliant, underactuated hand for robust manipulation
- (2014) Lael U. Odhner et al. INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH
- 3D Printing for the Rapid Prototyping of Structural Electronics
- (2014) Eric Macdonald et al. IEEE Access
- 3D Printing of Interdigitated Li-Ion Microbattery Architectures
- (2013) Ke Sun et al. ADVANCED MATERIALS
- 3D Printed Bionic Ears
- (2013) Manu S. Mannoor et al. NANO LETTERS
- Broadband Microwave Frequency Characterization of 3-D Printed Materials
- (2013) Paul I. Deffenbaugh et al. IEEE Transactions on Components Packaging and Manufacturing Technology
- Development of a Fused Deposition Modeling System for Low Melting Temperature Metal Alloys
- (2012) Jorge Mireles et al. JOURNAL OF ELECTRONIC PACKAGING
- Integrating stereolithography and direct print technologies for 3D structural electronics fabrication
- (2012) Amit Joe Lopes et al. RAPID PROTOTYPING JOURNAL
- Overview of current additive manufacturing technologies and selected applications
- (2012) Timothy J. Horn et al. SCIENCE PROGRESS
- Highly Flexible, Printed Alkaline Batteries Based on Mesh-Embedded Electrodes
- (2011) Abhinav M. Gaikwad et al. ADVANCED MATERIALS
- Untethered Hovering Flapping Flight of a 3D-Printed Mechanical Insect
- (2011) Charles Richter et al. ARTIFICIAL LIFE
- Inkjet Printing of Ultrawideband (UWB) Antennas on Paper-Based Substrates
- (2011) George Shaker et al. IEEE Antennas and Wireless Propagation Letters
- A 3D printed dry electrode for ECG/EEG recording
- (2011) P. Salvo et al. SENSORS AND ACTUATORS A-PHYSICAL
- Arrays of Ultracompliant Electrochemical Dry Gel Cells for Stretchable Electronics
- (2010) Martin Kaltenbrunner et al. ADVANCED MATERIALS
- Future direction of direct writing
- (2010) Nam-Soo Kim et al. JOURNAL OF APPLIED PHYSICS
- Multi-material microstereolithography
- (2009) Jae-Won Choi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Paper-based, printed zinc–air battery
- (2009) M. Hilder et al. JOURNAL OF POWER SOURCES
- Manufacturing electrochemical platforms: Direct-write dispensing versus screen printing
- (2008) Rashid O. Kadara et al. ELECTROCHEMISTRY COMMUNICATIONS
- Freeform fabrication and characterization of Zn‐air batteries
- (2008) Evan Malone et al. RAPID PROTOTYPING JOURNAL
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationPublish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn More