3D printing of an iron-rich slag based hybrid mortar. A durable, sustainable and cost-competitive product?
Published 2023 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
3D printing of an iron-rich slag based hybrid mortar. A durable, sustainable and cost-competitive product?
Authors
Keywords
-
Journal
CEMENT & CONCRETE COMPOSITES
Volume 144, Issue -, Pages 105304
Publisher
Elsevier BV
Online
2023-09-22
DOI
10.1016/j.cemconcomp.2023.105304
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Promoting the use of Fe-rich slag in construction: Development of a hybrid binder for 3D printing
- (2023) Glenn Beersaerts et al. CEMENT & CONCRETE COMPOSITES
- 3D printing of limestone-calcined clay cement: A review of its potential implementation in the construction industry
- (2023) Yazeed A. Al-Noaimat et al. Results in Engineering
- Performance criteria, environmental impact and cost assessment for 3D printable concrete mixtures
- (2022) Manu K. Mohan et al. RESOURCES CONSERVATION AND RECYCLING
- Valorising Slags from Non-ferrous Metallurgy into Hybrid Cementitious Binders: Mix Design and Performance
- (2021) Lukas Arnout et al. Waste and Biomass Valorization
- 3D Concrete Printing: A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics
- (2021) Atta Ur Rehman et al. Materials
- 3D printing of calcined clay-limestone-based cementitious materials
- (2021) Yu Chen et al. CEMENT AND CONCRETE RESEARCH
- High strength fiber reinforced one-part alkali activated slag/fly ash binders with ceramic aggregates: Microscopic analysis, mechanical properties, drying shrinkage, and freeze-thaw resistance
- (2020) Z. Abdollahnejad et al. CONSTRUCTION AND BUILDING MATERIALS
- Mechanical Properties, Microstructure, and Chloride Content of Alkali-Activated Fly Ash Paste Made with Sea Water
- (2020) Salman Siddique et al. Materials
- Geopolymers reinforced by short and long fibres – innovative materials for additive manufacturing
- (2020) Kinga Korniejenko et al. Current Opinion in Chemical Engineering
- Elastic buckling and plastic collapse during 3D concrete printing
- (2020) A.S.J. Suiker et al. CEMENT AND CONCRETE RESEARCH
- Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing
- (2019) Venkatesh Naidu Nerella et al. CONSTRUCTION AND BUILDING MATERIALS
- Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing
- (2019) Biranchi Panda et al. JOURNAL OF CLEANER PRODUCTION
- Structural failure during extrusion-based 3D printing processes
- (2019) R. J. M. Wolfs et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Understanding the leaching behavior in Inorganic Polymers made of Iron rich slags Journal of Cleaner production
- (2019) Giels Michiel et al. JOURNAL OF CLEANER PRODUCTION
- Freeze-thaw durability of repair mortars and porous limestone: compatibility issues
- (2019) Ákos Török et al. Progress in Earth and Planetary Science
- Freeze-thaw durability of red mud slurry-class F fly ash-based geopolymer: Effect of curing conditions
- (2019) Mengxuan Zhao et al. CONSTRUCTION AND BUILDING MATERIALS
- Freeze-thaw resistance of Class F fly ash-based geopolymer concrete
- (2019) Renda Zhao et al. CONSTRUCTION AND BUILDING MATERIALS
- Pore Structure as a Response to the Freeze/Thaw Resistance of Mortars
- (2019) Ivanka Netinger Grubeša et al. Materials
- Shrinkage and Mitigation Strategies to Improve the Dimensional Stability of CaO-FeOx-Al2O3-SiO2 Inorganic Polymers
- (2019) Guilherme Ascensão et al. Materials
- Upcycling of non-ferrous metallurgy slags: Identifying the most reactive slag for inorganic polymer construction materials
- (2019) Jorn Van De Sande et al. RESOURCES CONSERVATION AND RECYCLING
- Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing
- (2018) Biranchi Panda et al. CERAMICS INTERNATIONAL
- Fresh properties of a novel 3D printing concrete ink
- (2018) Yu Zhang et al. CONSTRUCTION AND BUILDING MATERIALS
- Freeze thaw and deicer salt scaling resistance of concrete prepared with alkali aluminosilicate cement
- (2018) Faris Matalkah et al. CONSTRUCTION AND BUILDING MATERIALS
- Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
- (2018) Biranchi Panda et al. CEMENT & CONCRETE COMPOSITES
- 3D printable concrete: Mixture design and test methods
- (2018) A.V. Rahul et al. CEMENT & CONCRETE COMPOSITES
- Additive manufacturing of geopolymer for sustainable built environment
- (2017) Biranchi Panda et al. JOURNAL OF CLEANER PRODUCTION
- Impact of activator chemistry on permeability of alkali-activated slags
- (2017) Anna Blyth et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Influence of pore structures on the frost resistance of concrete
- (2017) Ping Zhang et al. MAGAZINE OF CONCRETE RESEARCH
- Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
- (2017) Biranchi Panda et al. MATERIALS LETTERS
- Mix-design Parameters and Real-life Considerations in the Pursuit of Lower Environmental Impact Inorganic Polymers
- (2017) A. Peys et al. Waste and Biomass Valorization
- The influence of curing conditions on the mechanical properties and leaching of inorganic polymers made of fayalitic slag
- (2017) Remus I. Iacobescu et al. Frontiers of Chemical Science and Engineering
- Chemical activation of hybrid binders based on siliceous fly ash and Portland cement
- (2016) Salaheddine Alahrache et al. CEMENT & CONCRETE COMPOSITES
- Manufacture of hybrid cements with fly ash and bottom ash from a municipal solid waste incinerator
- (2016) I. Garcia-Lodeiro et al. CONSTRUCTION AND BUILDING MATERIALS
- The Influence of Nano-Fe3O4 on the Microstructure and Mechanical Properties of Cementitious Composites
- (2016) Pawel Sikora et al. Nanoscale Research Letters
- The Influence of Nano-Fe3O4 on the Microstructure and Mechanical Properties of Cementitious Composites
- (2016) Pawel Sikora et al. Nanoscale Research Letters
- How 3D printing technology changes the rules of the game
- (2016) Ivo Kothman et al. Journal of Manufacturing Technology Management
- Variation in hybrid cements over time. Alkaline activation of fly ash–portland cement blends
- (2013) I. García-Lodeiro et al. CEMENT AND CONCRETE RESEARCH
- Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
- (2013) Louise K. Turner et al. CONSTRUCTION AND BUILDING MATERIALS
- Hardened properties of high-performance printing concrete
- (2012) T.T. Le et al. CEMENT AND CONCRETE RESEARCH
- Adsorption of superplasticizer admixtures on alkali-activated slag pastes
- (2009) M. Palacios et al. CEMENT AND CONCRETE RESEARCH
- The role of open and closed curing conditions on the leaching properties of fly ash-slag-based geopolymers
- (2009) Maria Izquierdo et al. JOURNAL OF HAZARDOUS MATERIALS
- Freeze–thaw damage and chemical change of a portland cement concrete in the presence of diluted deicers
- (2009) Xianming Shi et al. MATERIALS AND STRUCTURES
- Drying and autogenous shrinkage of pastes and mortars with activated slag cement
- (2008) Antonio A. Melo Neto et al. CEMENT AND CONCRETE RESEARCH
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now