Freeze-thaw durability of repair mortars and porous limestone: compatibility issues

Sacrificial mortars for surface desalination

(2018) N. Husillos-Rodríguez et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of pore structure on the performance of photocatalytic lightweight lime-based finishing mortar

(2018) C. Giosuè et al.   CONSTRUCTION AND BUILDING MATERIALS

Micro-porosity and minero-petrographic features influences on decay: Experimental data from four dimension stones

(2018) Simona Scrivano et al.   CONSTRUCTION AND BUILDING MATERIALS

Strain measurements during capillary water infiltration in porous limestones

(2018) Mohamed Ahmed Hassine et al.   CONSTRUCTION AND BUILDING MATERIALS

Use of electrical resistance measurement to assess the water saturation profile in porous limestones during capillary imbibition

(2018) Mohamed Ahmed Hassine et al.   CONSTRUCTION AND BUILDING MATERIALS

The effects of the different curing conditions and the role of added aggregate in the strength of repair mortars

(2017) Balázs Szemerey-Kiss et al.   Environmental Earth Sciences

Failure mechanisms of repair mortar stone interface assessed by pull-off strength tests

(2016) Balázs Szemerey-Kiss et al.   Bulletin of Engineering Geology and the Environment

The effects of freeze–thaw (F–T) cycles on the Gödene travertine used in historical structures in Konya (Turkey)

(2016) Mehmedi Vehbi Gökçe et al.   COLD REGIONS SCIENCE AND TECHNOLOGY

Multi-scale metrology of concrete surface morphology: Fundamentals and specificity

(2016) Łukasz Sadowski et al.   CONSTRUCTION AND BUILDING MATERIALS

Freezing and thawing resistance of aerial lime mortar with metakaolin and a traditional water-repellent admixture

(2016) Cristiana Nunes et al.   CONSTRUCTION AND BUILDING MATERIALS

Relationship between Na2SO4 concentration and thermal response of reconstituted stone in the laboratory and on site

(2016) Céline Thomachot-Schneider et al.   Environmental Earth Sciences

Evaluation of the height 3D roughness parameters of concrete substrate and the adhesion to epoxy resin

(2016) Ł. Sadowski et al.   INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

ANN modeling of pull-off adhesion of concrete layers

(2015) Łukasz Sadowski et al.   ADVANCES IN ENGINEERING SOFTWARE

Critical degree of saturation: A control factor of freeze–thaw damage of porous limestones at Castle of Chambord, France

(2015) Asaad Al-Omari et al.   ENGINEERING GEOLOGY

Formulation and microstructural evaluation of tuff repair mortar

(2015) Lidija Korat et al.   JOURNAL OF CULTURAL HERITAGE

Composition and compatibility requirements of mineral repair mortars for stone – A review

(2014) Aurélie Isebaert et al.   CONSTRUCTION AND BUILDING MATERIALS

Long-term mechanical resistance and durability of air lime mortars with large additions of nanosilica

(2014) A. Duran et al.   CONSTRUCTION AND BUILDING MATERIALS

New natural hydraulic lime mortars – Physical and microstructural properties in different curing conditions

(2014) J. Grilo et al.   CONSTRUCTION AND BUILDING MATERIALS

Microstructure modification of cement mortars: Effect on capillarity and frost-resistance

(2013) Halina Garbalińska et al.   CONSTRUCTION AND BUILDING MATERIALS

The influence of binder/aggregate ratio on the pore properties and strength of repair mortars

(2013) B. Szemerey-Kiss et al.   Environmental Earth Sciences

Analysis of the correlations between freeze–thaw and salt crystallization tests

(2013) V. Cárdenes et al.   Environmental Earth Sciences

The difference in behaviour between calcitic and dolomitic lime mortars set under dry conditions: The relationship between textural and physical–mechanical properties

(2012) A. Arizzi et al.   CEMENT AND CONCRETE RESEARCH

Influence of porosity on compressive and tensile strength of cement mortar

(2012) Xudong Chen et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of water-to-cement ratio and curing period on pore structure of cement mortar

(2012) Xudong Chen et al.   CONSTRUCTION AND BUILDING MATERIALS

Non-linear decay of building stones during freeze–thaw weathering processes

(2012) Javier Martínez-Martínez et al.   CONSTRUCTION AND BUILDING MATERIALS

Resistance of plain and blended cement mortars exposed to severe sulfate attacks

(2011) Thidar Aye et al.   CONSTRUCTION AND BUILDING MATERIALS

Characterization of repair mortars for the assessment of their compatibility in restoration projects: Research and practice

(2011) Luc Schueremans et al.   CONSTRUCTION AND BUILDING MATERIALS

Time-dependent changes in the strength of repair mortar used in the loss compensation of stone

(2011) B. Szemerey-Kiss et al.   Environmental Earth Sciences

A comparison of the properties and salt weathering susceptibility of natural and reconstituted stones of the Orval Abbey (Belgium)

(2010) C. Thomachot-Schneider et al.   Environmental Earth Sciences

Physical weathering of building stones induced by freeze–thaw action: a laboratory long-term study

(2010) J. Ruedrich et al.   Environmental Earth Sciences

Pore structure of historic and repair Roman cement mortars to establish their compatibility

(2010) Anna Klisińska-Kopacz et al.   JOURNAL OF CULTURAL HERITAGE

Crystallization modifiers applied in granite desalination: The role of the stone pore structure

(2009) T. Rivas et al.   CONSTRUCTION AND BUILDING MATERIALS

Role of pore size distribution in salt uptake, damage, and predicting salt susceptibility of eight types of Japanese building stones

(2009) Swe Yu et al.   ENGINEERING GEOLOGY

Flexural bond strength of natural hydraulic lime mortar and clay brick

(2009) S. Pavía et al.   MATERIALS AND STRUCTURES

Testing the durability of limestone for Cathedral façade restoration

(2008) E. A. Laycock et al.   Environmental geology.