3D printing of an iron-rich slag based hybrid mortar. A durable, sustainable and cost-competitive product?
出版年份 2023 全文链接
标题
3D printing of an iron-rich slag based hybrid mortar. A durable, sustainable and cost-competitive product?
作者
关键词
-
出版物
CEMENT & CONCRETE COMPOSITES
Volume 144, Issue -, Pages 105304
出版商
Elsevier BV
发表日期
2023-09-22
DOI
10.1016/j.cemconcomp.2023.105304
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Promoting the use of Fe-rich slag in construction: Development of a hybrid binder for 3D printing
- (2023) Glenn Beersaerts et al. CEMENT & CONCRETE COMPOSITES
- 3D printing of limestone-calcined clay cement: A review of its potential implementation in the construction industry
- (2023) Yazeed A. Al-Noaimat et al. Results in Engineering
- Performance criteria, environmental impact and cost assessment for 3D printable concrete mixtures
- (2022) Manu K. Mohan et al. RESOURCES CONSERVATION AND RECYCLING
- Valorising Slags from Non-ferrous Metallurgy into Hybrid Cementitious Binders: Mix Design and Performance
- (2021) Lukas Arnout et al. Waste and Biomass Valorization
- 3D Concrete Printing: A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics
- (2021) Atta Ur Rehman et al. Materials
- 3D printing of calcined clay-limestone-based cementitious materials
- (2021) Yu Chen et al. CEMENT AND CONCRETE RESEARCH
- High strength fiber reinforced one-part alkali activated slag/fly ash binders with ceramic aggregates: Microscopic analysis, mechanical properties, drying shrinkage, and freeze-thaw resistance
- (2020) Z. Abdollahnejad et al. CONSTRUCTION AND BUILDING MATERIALS
- Mechanical Properties, Microstructure, and Chloride Content of Alkali-Activated Fly Ash Paste Made with Sea Water
- (2020) Salman Siddique et al. Materials
- Geopolymers reinforced by short and long fibres – innovative materials for additive manufacturing
- (2020) Kinga Korniejenko et al. Current Opinion in Chemical Engineering
- Elastic buckling and plastic collapse during 3D concrete printing
- (2020) A.S.J. Suiker et al. CEMENT AND CONCRETE RESEARCH
- Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing
- (2019) Venkatesh Naidu Nerella et al. CONSTRUCTION AND BUILDING MATERIALS
- Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing
- (2019) Biranchi Panda et al. JOURNAL OF CLEANER PRODUCTION
- Structural failure during extrusion-based 3D printing processes
- (2019) R. J. M. Wolfs et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Understanding the leaching behavior in Inorganic Polymers made of Iron rich slags Journal of Cleaner production
- (2019) Giels Michiel et al. JOURNAL OF CLEANER PRODUCTION
- Freeze-thaw durability of repair mortars and porous limestone: compatibility issues
- (2019) Ákos Török et al. Progress in Earth and Planetary Science
- Freeze-thaw durability of red mud slurry-class F fly ash-based geopolymer: Effect of curing conditions
- (2019) Mengxuan Zhao et al. CONSTRUCTION AND BUILDING MATERIALS
- Freeze-thaw resistance of Class F fly ash-based geopolymer concrete
- (2019) Renda Zhao et al. CONSTRUCTION AND BUILDING MATERIALS
- Pore Structure as a Response to the Freeze/Thaw Resistance of Mortars
- (2019) Ivanka Netinger Grubeša et al. Materials
- Shrinkage and Mitigation Strategies to Improve the Dimensional Stability of CaO-FeOx-Al2O3-SiO2 Inorganic Polymers
- (2019) Guilherme Ascensão et al. Materials
- Upcycling of non-ferrous metallurgy slags: Identifying the most reactive slag for inorganic polymer construction materials
- (2019) Jorn Van De Sande et al. RESOURCES CONSERVATION AND RECYCLING
- Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing
- (2018) Biranchi Panda et al. CERAMICS INTERNATIONAL
- Fresh properties of a novel 3D printing concrete ink
- (2018) Yu Zhang et al. CONSTRUCTION AND BUILDING MATERIALS
- Freeze thaw and deicer salt scaling resistance of concrete prepared with alkali aluminosilicate cement
- (2018) Faris Matalkah et al. CONSTRUCTION AND BUILDING MATERIALS
- Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
- (2018) Biranchi Panda et al. CEMENT & CONCRETE COMPOSITES
- 3D printable concrete: Mixture design and test methods
- (2018) A.V. Rahul et al. CEMENT & CONCRETE COMPOSITES
- Additive manufacturing of geopolymer for sustainable built environment
- (2017) Biranchi Panda et al. JOURNAL OF CLEANER PRODUCTION
- Impact of activator chemistry on permeability of alkali-activated slags
- (2017) Anna Blyth et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Influence of pore structures on the frost resistance of concrete
- (2017) Ping Zhang et al. MAGAZINE OF CONCRETE RESEARCH
- Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
- (2017) Biranchi Panda et al. MATERIALS LETTERS
- Mix-design Parameters and Real-life Considerations in the Pursuit of Lower Environmental Impact Inorganic Polymers
- (2017) A. Peys et al. Waste and Biomass Valorization
- The influence of curing conditions on the mechanical properties and leaching of inorganic polymers made of fayalitic slag
- (2017) Remus I. Iacobescu et al. Frontiers of Chemical Science and Engineering
- Chemical activation of hybrid binders based on siliceous fly ash and Portland cement
- (2016) Salaheddine Alahrache et al. CEMENT & CONCRETE COMPOSITES
- Manufacture of hybrid cements with fly ash and bottom ash from a municipal solid waste incinerator
- (2016) I. Garcia-Lodeiro et al. CONSTRUCTION AND BUILDING MATERIALS
- The Influence of Nano-Fe3O4 on the Microstructure and Mechanical Properties of Cementitious Composites
- (2016) Pawel Sikora et al. Nanoscale Research Letters
- The Influence of Nano-Fe3O4 on the Microstructure and Mechanical Properties of Cementitious Composites
- (2016) Pawel Sikora et al. Nanoscale Research Letters
- How 3D printing technology changes the rules of the game
- (2016) Ivo Kothman et al. Journal of Manufacturing Technology Management
- Variation in hybrid cements over time. Alkaline activation of fly ash–portland cement blends
- (2013) I. García-Lodeiro et al. CEMENT AND CONCRETE RESEARCH
- Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
- (2013) Louise K. Turner et al. CONSTRUCTION AND BUILDING MATERIALS
- Hardened properties of high-performance printing concrete
- (2012) T.T. Le et al. CEMENT AND CONCRETE RESEARCH
- Adsorption of superplasticizer admixtures on alkali-activated slag pastes
- (2009) M. Palacios et al. CEMENT AND CONCRETE RESEARCH
- The role of open and closed curing conditions on the leaching properties of fly ash-slag-based geopolymers
- (2009) Maria Izquierdo et al. JOURNAL OF HAZARDOUS MATERIALS
- Freeze–thaw damage and chemical change of a portland cement concrete in the presence of diluted deicers
- (2009) Xianming Shi et al. MATERIALS AND STRUCTURES
- Drying and autogenous shrinkage of pastes and mortars with activated slag cement
- (2008) Antonio A. Melo Neto et al. CEMENT AND CONCRETE RESEARCH
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started