Promoting the use of Fe-rich slag in construction: Development of a hybrid binder for 3D printing
Published 2023 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Promoting the use of Fe-rich slag in construction: Development of a hybrid binder for 3D printing
Authors
Keywords
-
Journal
CEMENT & CONCRETE COMPOSITES
Volume 138, Issue -, Pages 104959
Publisher
Elsevier BV
Online
2023-02-07
DOI
10.1016/j.cemconcomp.2023.104959
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Valorising Slags from Non-ferrous Metallurgy into Hybrid Cementitious Binders: Mix Design and Performance
- (2021) Lukas Arnout et al. Waste and Biomass Valorization
- 3D printing of calcined clay-limestone-based cementitious materials
- (2021) Yu Chen et al. CEMENT AND CONCRETE RESEARCH
- Effect of different grade levels of calcined clays on fresh and hardened properties of ternary-blended cementitious materials for 3D printing
- (2020) Yu Chen et al. CEMENT & CONCRETE COMPOSITES
- Geopolymers reinforced by short and long fibres – innovative materials for additive manufacturing
- (2020) Kinga Korniejenko et al. Current Opinion in Chemical Engineering
- Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing
- (2019) Biranchi Panda et al. JOURNAL OF CLEANER PRODUCTION
- Insights into material design, extrusion rheology, and properties of 3D-printable alkali-activated fly ash-based binders
- (2019) Hussam Alghamdi et al. MATERIALS & DESIGN
- Inorganic Polymers From CaO-FeOx-SiO2 Slag: The Start of Oxidation of Fe and the Formation of a Mixed Valence Binder
- (2019) Arne Peys et al. Frontiers in Materials
- Influence of nano-clay on rheology, fresh properties, heat of hydration and strength of cement-based mortars
- (2019) Ines Dejaeghere et al. CONSTRUCTION AND BUILDING MATERIALS
- Fresh and hardened properties of 3D printable cementitious materials for building and construction
- (2018) Suvash Chandra Paul et al. Archives of Civil and Mechanical Engineering
- Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
- (2018) R.J.M. Wolfs et al. CEMENT AND CONCRETE RESEARCH
- Rheological requirements for printable concretes
- (2018) Nicolas Roussel CEMENT AND CONCRETE RESEARCH
- Printable properties of cementitious material containing copper tailings for extrusion based 3D printing
- (2018) Guowei Ma et al. CONSTRUCTION AND BUILDING MATERIALS
- Measurement of tensile bond strength of 3D printed geopolymer mortar
- (2018) Biranchi Panda et al. MEASUREMENT
- Vision of 3D printing with concrete — Technical, economic and environmental potentials
- (2018) Geert De Schutter et al. CEMENT AND CONCRETE RESEARCH
- Effect of fly ash and silica fume on rheology, compressive strength and self-compacting in cement mixtures
- (2018) Jaime Arturo Correa-Yepes et al. Dyna-Colombia
- Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
- (2018) Biranchi Panda et al. CEMENT & CONCRETE COMPOSITES
- 3D printable concrete: Mixture design and test methods
- (2018) A.V. Rahul et al. CEMENT & CONCRETE COMPOSITES
- Mix-design Parameters and Real-life Considerations in the Pursuit of Lower Environmental Impact Inorganic Polymers
- (2017) A. Peys et al. Waste and Biomass Valorization
- Physico-chemical interaction between mineral admixtures and OPC–calcium sulfoaluminate (CSA) cements and its influence on early-age expansion
- (2016) Piyush Chaunsali et al. CEMENT AND CONCRETE RESEARCH
- Fine material effect on kaolin suspensions rheology
- (2016) Moisés Oswaldo Bustamante Rúa et al. Dyna-Colombia
- How 3D printing technology changes the rules of the game
- (2016) Ivo Kothman et al. Journal of Manufacturing Technology Management
- Advances in understanding hydration of Portland cement
- (2015) Karen L. Scrivener et al. CEMENT AND CONCRETE RESEARCH
- S-shaped flow curves of shear thickening suspensions: Direct observation of frictional rheology
- (2015) Zhongcheng Pan et al. PHYSICAL REVIEW E
- The hydration of synthetic brownmillerite in presence of low Ca-sulfate content and calcite monitored by quantitative in-situ-XRD and heat flow calorimetry
- (2013) D. Ectors et al. CEMENT AND CONCRETE RESEARCH
- Variation in hybrid cements over time. Alkaline activation of fly ash–portland cement blends
- (2013) I. García-Lodeiro et al. CEMENT AND CONCRETE RESEARCH
- Effect of sulfate content on cement mixtures
- (2013) D. Torréns-Martín et al. CONSTRUCTION AND BUILDING MATERIALS
- Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
- (2013) Louise K. Turner et al. CONSTRUCTION AND BUILDING MATERIALS
- Study on the rheological properties of Portland cement pastes with polycarboxylate superplasticizers
- (2013) Xiangming Kong et al. RHEOLOGICA ACTA
- Mix design and fresh properties for high-performance printing concrete
- (2012) T. T. Le et al. MATERIALS AND STRUCTURES
- Fine limestone additions to regulate setting in high volume fly ash mixtures
- (2011) Dale P. Bentz et al. CEMENT & CONCRETE COMPOSITES
- Compatibility studies between N-A-S-H and C-A-S-H gels. Study in the ternary diagram Na2O–CaO–Al2O3–SiO2–H2O
- (2011) I. Garcia-Lodeiro et al. CEMENT AND CONCRETE RESEARCH
- Calorimetric study on the influence of calcium sulfate on the hydration of Portland cement–calcium aluminate cement mixtures
- (2011) Linglin Xu et al. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
- Effect of superplasticizers on workability retention and initial setting time of cement pastes
- (2010) Min-Hong Zhang et al. CONSTRUCTION AND BUILDING MATERIALS
- Adsorption of superplasticizer admixtures on alkali-activated slag pastes
- (2009) M. Palacios et al. CEMENT AND CONCRETE RESEARCH
- Why is fresh self-compacting concrete shear thickening?
- (2009) Dimitri Feys et al. CEMENT AND CONCRETE RESEARCH
- Fresh self compacting concrete, a shear thickening material
- (2008) Dimitri Feys et al. CEMENT AND CONCRETE RESEARCH
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started