Materials Requirements in Fused Filament Fabrication: A Framework for the Design of Next‐Generation 3D Printable Thermoplastics and Composites
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Materials Requirements in Fused Filament Fabrication: A Framework for the Design of Next‐Generation 3D Printable Thermoplastics and Composites
Authors
Keywords
-
Journal
MACROMOLECULAR MATERIALS AND ENGINEERING
Volume 307, Issue 10, Pages 2200197
Publisher
Wiley
Online
2022-08-18
DOI
10.1002/mame.202200197
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Metal fused filament fabrication of the nickel-base superalloy IN 718
- (2022) Yvonne Thompson et al. JOURNAL OF MATERIALS SCIENCE
- Embrittlement of polybutylene terephthalate induced by injection molding
- (2022) C. Loyer et al. POLYMER DEGRADATION AND STABILITY
- Synthesis and Characterisation of ASA-PEEK Composites for Fused Filament Fabrication
- (2022) Belén Palacios-Ibáñez et al. Polymers
- A Review of Polymer-Based Materials for Fused Filament Fabrication (FFF): Focus on Sustainability and Recycled Materials
- (2022) Daniela Fico et al. Polymers
- Systematic ranking of filaments regarding their particulate emissions during fused filament fabrication 3D printing by means of a proposed standard test method
- (2022) Chi‐Long Tang et al. INDOOR AIR
- Evaluation of anisotropic mechanical behaviour of 316L parts realized by metal fused filament fabrication using digital image correlation
- (2022) Alessandro Pellegrini et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A review of emission characteristics and control strategies for particles emitted from 3D fused deposition modeling (FDM) printing
- (2022) Jie Zhang et al. BUILDING AND ENVIRONMENT
- Roughness investigation of steel 316L parts fabricated by Metal Fused Filament Fabrication
- (2022) Alberto Boschetto et al. Journal of Manufacturing Processes
- Effect of Layer Directions on Internal Structures and Tensile Properties of 17-4PH Stainless Steel Parts Fabricated by Fused Deposition of Metals
- (2021) Yoshifumi Abe et al. Materials
- Coupling Hot Melt Extrusion and Fused Deposition Modeling: Critical Properties for Successful Performance
- (2021) Suresh Bandari et al. ADVANCED DRUG DELIVERY REVIEWS
- Synergistic effect of plasticizer and nucleating agent on crystallization behavior of polylactide during fused filament fabrication
- (2021) Xia Gao et al. POLYMER
- Homogeneous distribution of lignin/graphene fillers with enhanced interlayer adhesion for 3D printing filament
- (2021) Denesh Mohan et al. POLYMER COMPOSITES
- Numerical study for the improvement of bead spreading architecture with modified nozzle geometries in additive manufacturing of polymers
- (2021) Easir Arafat Papon et al. RAPID PROTOTYPING JOURNAL
- Novel polymer materials systems to expand the capabilities of FDM™-type additive manufacturing
- (2021) Truman J. Word et al. MRS Communications
- Development of Antimicrobial PLA Composites for Fused Filament Fabrication
- (2021) Zachary Brounstein et al. Polymers
- Realization of Circular Economy of 3D Printed Plastics: A Review
- (2021) Caihan Zhu et al. Polymers
- The role of biotechnology in the transition from plastics to bioplastics: an opportunity to reconnect global growth with sustainability
- (2021) Micaela Degli Esposti et al. FEBS Open Bio
- Sustainable Materials for Fused Deposition Modeling 3D Printing Applications
- (2021) Jennifer P. Rett et al. ADVANCED ENGINEERING MATERIALS
- 3D printing of shape memory polymers
- (2021) Guido Ehrmann et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Recent progress of 3D printed continuous fiber reinforced polymer composites based on fused deposition modeling: a review
- (2021) Haiguang Zhang et al. Journal of Materials Science
- A finishing process via ultrasonic drilling for additively manufactured carbon fiber composites
- (2021) Pedram Parandoush et al. RAPID PROTOTYPING JOURNAL
- Evaluation of the Technical Viability of Distributed Mechanical Recycling of PLA 3D Printing Wastes
- (2021) Freddys R. Beltrán et al. Polymers
- Extrusion-Based 3D Printing Applications of PLA Composites: A Review
- (2021) Eda Hazal Tümer et al. Coatings
- Designing 3D printable polypropylene: Material and process optimisation through rheology
- (2021) M. Bertolino et al. Additive Manufacturing
- Rheology scaling of spherical metal powders dispersed in thermoplastics and its correlation to the extrudability of filaments for 3D printing
- (2021) Amm G. Hasib et al. Additive Manufacturing
- Challenges of fused deposition modeling 3D printing in pharmaceutical applications: Where are we now?
- (2021) Chloé Parulski et al. ADVANCED DRUG DELIVERY REVIEWS
- Fused Filament Fabrication‐Based Additive Manufacturing of Commercially Pure Titanium
- (2021) Yvonne Thompson et al. ADVANCED ENGINEERING MATERIALS
- Development of Hot‐Melt Extrusion Method to Produce Hydroxyapatite/Polycaprolactone Composite Filaments
- (2021) Filip Zavřel et al. ADVANCED ENGINEERING MATERIALS
- Additive Manufacturing of Polymer-Based Composites Using Fused Filament Fabrication (FFF): a Review
- (2021) M. Ahmadifar et al. APPLIED COMPOSITE MATERIALS
- Influence of polymer additives on gas-phase emissions from 3D printer filaments
- (2021) Phillip M. Potter et al. CHEMOSPHERE
- Polymer-based filament feedstock for additive manufacturing
- (2021) Soyeon Park et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Fibre bridging and nozzle clogging in 3D printing of discontinuous carbon fibre-reinforced polymer composites: coupled CFD-DEM modelling
- (2021) Hao Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Fused deposition modeling based polymeric materials and their performance: A review
- (2021) Vigneshwaran Shanmugam et al. POLYMER COMPOSITES
- Modelling of Anisotropic Electrical Conduction in Layered Structures 3D-Printed with Fused Deposition Modelling
- (2021) Alexander Dijkshoorn et al. SENSORS
- Bending Properties of Lightweight Copper Specimens with Different Infill Patterns Produced by Material Extrusion Additive Manufacturing, Solvent Debinding and Sintering
- (2021) Joamin Gonzalez-Gutierrez et al. Applied Sciences-Basel
- Strength Enhancement in Fused Filament Fabrication via the Isotropy Toolpath
- (2021) Xinyi Xiao et al. Applied Sciences-Basel
- Additive manufacturing of polymer nanocomposites: Needs and challenges in materials, processes, and applications
- (2021) Ans Al Rashid et al. Journal of Materials Research and Technology-JMR&T
- Affordable Three-Dimensional Printed Heart Models
- (2021) Gorka Gómez-Ciriza et al. Frontiers in Cardiovascular Medicine
- Flexural Strength and Surface Profiling of Carbon-Based PLA Parts by Additive Manufacturing
- (2021) Pushpendra Yadav et al. Journal of The Institution of Engineers (India): Series C
- Biomimetic Tendrils by Four Dimensional Printing Bimorph Springs with Torsion and Contraction Properties Based on Bio‐Compatible Graphene/Silk Fibroin and Poly(3‐Hydroxybutyrate‐ co ‐3‐Hydroxyvalerate)
- (2021) Carmelo De Maria et al. ADVANCED FUNCTIONAL MATERIALS
- Effect of metal particle size and powder volume fraction on the filling performance of powder injection moulded parts with a microtextured surface
- (2021) Lena Ammosova et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Towards sustainable additive manufacturing: The need for awareness of particle and vapor releases during polymer recycling, making filament, and fused filament fabrication 3-D printing
- (2021) Aleksandr B. Stefaniak et al. RESOURCES CONSERVATION AND RECYCLING
- Recycling of natural fiber composites: Challenges and opportunities
- (2021) Xianhui Zhao et al. RESOURCES CONSERVATION AND RECYCLING
- A Review on Reinforcement Methods for Polymeric Materials Processed Using Fused Filament Fabrication (FFF)
- (2021) Juan Pratama et al. Polymers
- Fused Filament Fabrication Process: A Review of Numerical Simulation Techniques
- (2021) Ans Al Rashid et al. Polymers
- Applications of 3D-Printed PEEK via Fused Filament Fabrication: A Systematic Review
- (2021) Rupak Dua et al. Polymers
- Material Anisotropy in Additively Manufactured Polymers and Polymer Composites: A Review
- (2021) Nima Zohdi et al. Polymers
- A review of recently developed polymer composite materials for fused deposition modeling 3D printing
- (2021) Surendra Singh Dewada et al. Materials Research Express
- A review on voids of 3D printed parts by fused filament fabrication
- (2021) Yubo Tao et al. Journal of Materials Research and Technology-JMR&T
- Fused deposition modeling of thermoplastic elastomeric materials: Challenges and opportunities
- (2021) Pratiksha Awasthi et al. Additive Manufacturing
- Additive manufacturing of antibacterial PLA-ZnO nanocomposites: Benefits, limitations and open challenges
- (2021) Wei Juene Chong et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Human exposure to metals in consumer-focused fused filament fabrication (FFF)/ 3D printing processes
- (2021) Getachew Tedla et al. SCIENCE OF THE TOTAL ENVIRONMENT
- Systematic screening of pharmaceutical polymers for hot melt extrusion processing: a comprehensive review
- (2020) Rishi Thakkar et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Mechanical testing of hydroxyapatite filaments for tissue scaffolds preparation by fused deposition ceramics
- (2020) Marian Janek et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Optimization of the 3D Printing Parameters for Tensile Properties of Specimens Produced by Fused Filament Fabrication of 17-4PH Stainless Steel
- (2020) Damir Godec et al. Materials
- Investigation of a Short Carbon Fibre-Reinforced Polyamide and Comparison of Two Manufacturing Processes: Fused Deposition Modelling (FDM) and Polymer Injection Moulding (PIM)
- (2020) Elena Verdejo de Toro et al. Materials
- Vascular Wall–Mesenchymal Stem Cells Differentiation on 3D Biodegradable Highly Porous CaSi-DCPD Doped Poly (α-hydroxy) Acids Scaffolds for Bone Regeneration
- (2020) Monica Forni et al. Nanomaterials
- Polymers for Extrusion-Based 3D Printing of Pharmaceuticals: A Holistic Materials–Process Perspective
- (2020) Mohammad A. Azad et al. Pharmaceutics
- 3D printed continuous CF/PA6 composites: Effect of microscopic voids on mechanical performance
- (2020) Qinghao He et al. COMPOSITES SCIENCE AND TECHNOLOGY
- 3D printing by fused deposition modeling of single- and multi-compartment hollow systems for oral delivery – A review
- (2020) Alice Melocchi et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Assessment of the morphology and dimensional accuracy of 3D printed PLA and PLA/HAp scaffolds
- (2020) Ieva Gendviliene et al. Journal of the Mechanical Behavior of Biomedical Materials
- Influence of the Layer Directions on the Properties of 316L Stainless Steel Parts Fabricated through Fused Deposition of Metals
- (2020) Takashi Kurose et al. Materials
- Multi‐Material 3D and 4D Printing: A Survey
- (2020) Mohammad Rafiee et al. Advanced Science
- Use of Biomaterials for 3D Printing by Fused Deposition Modeling Technique: A Review
- (2020) Sanjita Wasti et al. Frontiers in Chemistry
- Natural Polymeric Scaffolds in Bone Regeneration
- (2020) Miriam Filippi et al. Frontiers in Bioengineering and Biotechnology
- Sustainable Materials and Chemical Processes for Additive Manufacturing
- (2020) Eva Sanchez-Rexach et al. CHEMISTRY OF MATERIALS
- Towards design of mechanical part and electronic control of multi-material/multicolor fused deposition modeling 3D printing
- (2020) Mohammed Boulaala et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Development of a quantitative method to evaluate the printability of filaments for fused deposition modeling 3D printing
- (2020) Pengchong Xu et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Assessment of 3D printing using fused deposition modeling and selective laser sintering for a circular economy
- (2020) K. DePalma et al. JOURNAL OF CLEANER PRODUCTION
- Influence of the Infill Orientation on the Properties of Zirconia Parts Produced by Fused Filament Fabrication
- (2020) Santiago Cano et al. Materials
- Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships
- (2020) Ali Reza Zanjanijam et al. Polymers
- FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments
- (2020) Sachini Wickramasinghe et al. Polymers
- Extrusion 3D Printing of Polymeric Materials with Advanced Properties
- (2020) Zhen Jiang et al. Advanced Science
- Materials design for bone-tissue engineering
- (2020) Gerry L. Koons et al. Nature Reviews Materials
- Hot-Melt Extrusion Process Fluctuations and Their Impact on Critical Quality Attributes of Filaments and 3D-Printed Dosage Forms
- (2020) Hanna Ponsar et al. Pharmaceutics
- A comprehensive study on fused filament fabrication of Ti-6Al-4V structures
- (2020) Yaozhong Zhang et al. Additive Manufacturing
- Polymer-Bioactive Glass Composite Filaments for 3D Scaffold Manufacturing by Fused Deposition Modeling: Fabrication and Characterization
- (2020) Thomas Distler et al. Frontiers in Bioengineering and Biotechnology
- A Scientist’s Guide to Buying a 3D Printer: How to Choose the Right Printer for Your Laboratory
- (2020) Joshua J Tully et al. ANALYTICAL CHEMISTRY
- Characterization of particle emission from thermoplastic additive manufacturing
- (2020) S. Sittichompoo et al. ATMOSPHERIC ENVIRONMENT
- Advances in fused deposition modeling of discontinuous fiber/polymer composites
- (2020) Chao Hu et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- 3D printing filament as a second life of waste plastics—a review
- (2020) Katarzyna Mikula et al. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
- Fatigue behaviour of FDM-3D printed polymers, polymeric composites and architected cellular materials
- (2020) Vigneshwaran Shanmugam et al. INTERNATIONAL JOURNAL OF FATIGUE
- Printability studies of Ti-6Al-4V by metal fused filament fabrication (MF3)
- (2020) Paramjot Singh et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- The mechanical testing and performance analysis of polymer-fibre composites prepared through the additive manufacturing
- (2020) Vigneshwaran Shanmugam et al. POLYMER TESTING
- Fracture behavior of additively manufactured components: A review
- (2020) Mohammad Reza Khosravani et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Implementing FDM 3D Printing Strategies Using Natural Fibers to Produce Biomass Composite
- (2020) Waleed Ahmed et al. Materials
- Development of Bioimplants with 2D, 3D, and 4D Additive Manufacturing Materials
- (2020) Guo Liu et al. Engineering
- The role of poly (ethylene glycol) on crystallization, interlayer bond and mechanical performance of polylactide parts fabricated by fused filament fabrication
- (2020) Xia Gao et al. Additive Manufacturing
- Fused filament fabrication of polymer materials: A review of interlayer bond
- (2020) Xia Gao et al. Additive Manufacturing
- Impact of metal additives on particle emission profiles from a fused filament fabrication 3D printer
- (2020) Erik Alberts et al. ATMOSPHERIC ENVIRONMENT
- Powder content in powder extrusion moulding of tool steel: Dimensional stability, shrinkage and hardness
- (2020) Joamin Gonzalez-Gutierrez et al. MATERIALS LETTERS
- 3D printed bioactive and antibacterial silicate glass-ceramic scaffold by fused filament fabrication
- (2020) Adam C. Marsh et al. Materials Science & Engineering C-Materials for Biological Applications
- Influence of machine type and consecutive closed-loop recycling on macroscopic properties for fused filament fabrication of acrylonitrile-butadiene-styrene parts
- (2020) Pierandrea Dal Fabbro et al. RAPID PROTOTYPING JOURNAL
- Additive Manufacturing of β-Tricalcium Phosphate Components via Fused Deposition of Ceramics (FDC)
- (2020) Steffen Esslinger et al. Materials
- Real-Time 3D Printing Remote Defect Detection (Stringing) with Computer Vision and Artificial Intelligence
- (2020) Konstantinos Paraskevoudis et al. Processes
- Tensile properties of 3D-printed wood-filled PLA materials using poplar trees
- (2020) Samarthya Bhagia et al. Applied Materials Today
- Fibre flow and void formation in 3D printing of short-fibre reinforced thermoplastic composites: An experimental benchmark exercise
- (2020) Dongmin Yang et al. Additive Manufacturing
- Effect of stearic acid on rheological properties and printability of ethylene vinyl acetate based feedstocks for fused filament fabrication of alumina
- (2020) Lovro Gorjan et al. Additive Manufacturing
- Three-Dimensional Printing of Abrasive, Hard, and Thermally Conductive Synthetic Microdiamond–Polymer Composite Using Low-Cost Fused Deposition Modeling Printer
- (2019) Sidra Waheed et al. ACS Applied Materials & Interfaces
- Multi-Material Additive Manufacturing of Sustainable Innovative Materials and Structures
- (2019) Rupinder Singh et al. Polymers
- Characterization of the Mechanical Properties of FFF Structures and Materials: A Review on the Experimental, Computational and Theoretical Approaches
- (2019) Enrique Cuan-Urquizo et al. Materials
- Potential occupational hazards of additive manufacturing
- (2019) Gary A. Roth et al. JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE
- A critical review of fused deposition modeling 3D printing technology in manufacturing polylactic acid parts
- (2019) Zengguang Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- VOC Emissions and Formation Mechanisms from Carbon Nanotube Composites during 3D Printing
- (2019) Phillip M. Potter et al. ENVIRONMENTAL SCIENCE & TECHNOLOGY
- Recycling of biopolymers – The patent perspective
- (2019) Michael Niaounakis EUROPEAN POLYMER JOURNAL
- Mechanical properties of 3D parts fabricated by fused deposition modeling: Effect of various fillers in polylactide
- (2019) Xia Gao et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Recent Developments in Fused Deposition Modeling-Based 3D Printing of Polymers and Their Composites
- (2019) Tuan Noraihan Azila Tuan Rahim et al. Polymer Reviews
- Debinding behaviour of feedstock for material extrusion additive manufacturing of zirconia
- (2019) Christian Kukla et al. POWDER METALLURGY
- 4D Printing Self-Morphing Structures
- (2019) Mahdi Bodaghi et al. Materials
- Effect of Material and Process Specific Factors on the Strength of Printed Parts in Fused Filament Fabrication: A Review of Recent Developments
- (2019) Muhammad Harris et al. Materials
- A comprehensive review of extrusion-based additive manufacturing processes for rapid production of metallic and ceramic parts
- (2019) Kedarnath Rane et al. Advances in Manufacturing
- Design and Manufacturing Strategies for Fused Deposition Modelling in Additive Manufacturing: A Review
- (2019) Hugo I. Medellin-Castillo et al. Chinese Journal of Mechanical Engineering
- Modelling of the temperature and residual stress fields during 3D printing of polymer composites
- (2019) A. El Moumen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Modeling of interlayer contact and contact pressure during fused filament fabrication
- (2019) Timothy J. Coogan et al. JOURNAL OF RHEOLOGY
- Fused deposition modeling of mullite structures from a preceramic polymer and γ-alumina
- (2019) Lovro Gorjan et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Optimising the FDM additive manufacturing process to achieve maximum tensile strength: a state-of-the-art review
- (2019) Tessa Jane Gordelier et al. RAPID PROTOTYPING JOURNAL
- FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties
- (2019) Valentina Mazzanti et al. Polymers
- Review of acrylonitrile butadiene styrene in fused filament fabrication: A plastics engineering-focused perspective
- (2019) Amy M. Peterson Additive Manufacturing
- Characterization of volatile organic compound emissions from consumer level material extrusion 3D printers
- (2019) Aika Y. Davis et al. BUILDING AND ENVIRONMENT
- Fused deposition modeling shaping of glass infiltrated alumina for dental restoration
- (2019) Antonio Arnesano et al. CERAMICS INTERNATIONAL
- A critical review on 3D printed continuous fiber-reinforced composites: history, mechanism, materials and properties
- (2019) S.M. Fijul Kabir et al. COMPOSITE STRUCTURES
- 3D printed antibacterial silver nanowire/polylactide nanocomposites
- (2019) Ipek Bayraktar et al. COMPOSITES PART B-ENGINEERING
- Development and evaluation of pharmaceutical 3D printability for hot melt extruded cellulose-based filaments
- (2019) Jiaxiang Zhang et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- Tensile properties of sintered 17-4PH stainless steel fabricated by material extrusion additive manufacturing
- (2019) Joamin Gonzalez-Gutierrez et al. MATERIALS LETTERS
- Process porosity and mechanical performance of fused filament fabricated 316L stainless steel
- (2019) James Damon et al. RAPID PROTOTYPING JOURNAL
- Biobased Ketal–Diester Additives Derived from Levulinic Acid: Synthesis and Effect on the Thermal Stability and Thermo-Mechanical Properties of Poly(vinyl chloride)
- (2019) Alessandro Sinisi et al. ACS Sustainable Chemistry & Engineering
- 3D printing of high density polyethylene by fused filament fabrication
- (2019) Carl G. Schirmeister et al. Additive Manufacturing
- Binder jetting: A review of process, materials, and methods
- (2019) Mohsen Ziaee et al. Additive Manufacturing
- Highly Loaded Fiber Filled Polymers for Material Extrusion: A Review of Current Understanding
- (2019) Jacob J. Fallon et al. Additive Manufacturing
- DEVELOPMENT OF A COMBINED ANALYTICAL AND EXPERIMENTAL APPROACH FOR THE DETERMINATION OF THE COHESIVE STRENGTH BETWEEN MATERIAL EXTRUSION LAYERS USING THE TRUE AREA OF CONTACT
- (2019) Thao Phan Thi Phuong Additive Manufacturing
- Investigations on nozzle geometry in fused filament fabrication
- (2019) Vinzenz Nienhaus et al. Additive Manufacturing
- Recycled Cellulose Polypropylene Composite Feedstocks for Material Extrusion Additive Manufacturing
- (2019) Nicole E. Zander et al. ACS Omega
- Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites
- (2019) M. Heidari-Rarani et al. COMPOSITES PART B-ENGINEERING
- Recycling of fiberglass wind turbine blades into reinforced filaments for use in Additive Manufacturing
- (2019) Amirmohammad Rahimizadeh et al. COMPOSITES PART B-ENGINEERING
- Preparation of Thermoplastic Polyurethane Parts Reinforced with in Situ Polylactic Acid Microfibers during Fused Deposition Modeling: The Influences of Deposition-Induced Effects
- (2019) Jie Leng et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Manufacturing of polymer/metal composites by fused deposition modeling process with polyethylene
- (2019) Mojtaba Nabipour et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Material extrusion‐based additive manufacturing of polypropylene: A review on how to improve dimensional inaccuracy and warpage
- (2019) Martin Spoerk et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Laser polishing of Cu/PLA composite parts fabricated by fused deposition modeling: Analysis of surface finish and mechanical properties
- (2019) Lan Chen et al. POLYMER COMPOSITES
- Preliminary Characterization of Novel LDPE-Based Wear-Resistant Composite Suitable for FDM 3D Printing
- (2019) Piotr Olesik et al. Materials
- Insights and Aspects to the Modeling of the Molten Core Method for Optical Fiber Fabrication
- (2019) Cavillon et al. Materials
- 3D printing of continuous flax fibre reinforced biocomposites for structural applications
- (2019) A. Le Duigou et al. MATERIALS & DESIGN
- Influence of Rice Husk and Wood Biomass Properties on the Manufacture of Filaments for Fused Deposition Modeling
- (2019) Marie-Joo Le Guen et al. Frontiers in Chemistry
- Three-Dimensional Printing of a LiFePO4/Graphite Battery Cell via Fused Deposition Modeling
- (2019) Alexis Maurel et al. Scientific Reports
- Fused filament fabrication, debinding and sintering as a low cost additive manufacturing method of 316L stainless steel
- (2019) Yvonne Thompson et al. Additive Manufacturing
- Experimental and analytical study of the polymer melt flow through the hot-end in material extrusion additive manufacturing
- (2019) Marcin P. Serdeczny et al. Additive Manufacturing
- Low temperature fused deposition modeling (FDM) 3D printing of thermolabile drugs
- (2018) Gayathri Kollamaram et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Close-looped recycling of polylactic acid used in 3D printing: An experimental investigation and life cycle assessment
- (2018) Peng Zhao et al. JOURNAL OF CLEANER PRODUCTION
- Polishing of fused deposition modeling products by hot air jet: Evaluation of surface roughness
- (2018) Mohamed Adel et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effects of process parameters on the quality of PLA products fabricated by fused deposition modeling (FDM): surface roughness and tensile strength
- (2018) Mirigul Altan et al. Materials Testing
- Additive manufacturing: scientific and technological challenges, market uptake and opportunities
- (2018) Syed A.M. Tofail et al. Materials Today
- Formulation development and process analysis of drug-loaded filaments manufactured via hot-melt extrusion for 3D-printing of medicines
- (2018) Carolin Korte et al. PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY
- Development of a Simple Mechanical Screening Method for Predicting the Feedability of a Pharmaceutical FDM 3D Printing Filament
- (2018) Jehad M. Nasereddin et al. PHARMACEUTICAL RESEARCH
- Quality control issues in 3D-printing manufacturing: a review
- (2018) Hsin-Chieh Wu et al. RAPID PROTOTYPING JOURNAL
- Tightening the loop on the circular economy: Coupled distributed recycling and manufacturing with recyclebot and RepRap 3-D printing
- (2018) Shan Zhong et al. RESOURCES CONSERVATION AND RECYCLING
- Nozzle condition monitoring in 3D printing
- (2018) Yedige Tlegenov et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives
- (2018) Joamin Gonzalez-Gutierrez et al. Materials
- Interfacial bonding during multi-material fused deposition modeling (FDM) process due to inter-molecular diffusion
- (2018) Jun Yin et al. MATERIALS & DESIGN
- Interlayer adhesion and fracture resistance of polymers printed through melt extrusion additive manufacturing process
- (2018) Nahal Aliheidari et al. MATERIALS & DESIGN
- Rheological and heat transfer effects in fused filament fabrication
- (2018) David D. Phan et al. JOURNAL OF RHEOLOGY
- 3D printing metals like thermoplastics: Fused filament fabrication of metallic glasses
- (2018) Michael A. Gibson et al. Materials Today
- Influence of PLA Filament Conditions on Characteristics of FDM Parts
- (2018) Ana Valerga et al. Materials
- Fused Filament Fabrication of Small Ceramic Components
- (2018) Dorit Nötzel et al. Materials
- What makes a material printable? A viscoelastic model for extrusion-based 3D printing of polymers
- (2018) Chad Duty et al. Journal of Manufacturing Processes
- Developing thixo-extrusion process for additive manufacturing of metals in semi-solid state
- (2018) Amin Jabbari et al. Journal of Manufacturing Processes
- Advances in 4D Printing: Materials and Applications
- (2018) Xiao Kuang et al. ADVANCED FUNCTIONAL MATERIALS
- Highly Loaded Graphite–Polylactic Acid Composite-Based Filaments for Lithium-Ion Battery Three-Dimensional Printing
- (2018) Alexis Maurel et al. CHEMISTRY OF MATERIALS
- Comparison of Stainless Steel 316L Parts Made by FDM- and SLM-Based Additive Manufacturing Processes
- (2018) Haijun Gong et al. JOM
- The importance of rheological behavior in the additive manufacturing technique material extrusion
- (2018) Michael E. Mackay JOURNAL OF RHEOLOGY
- A study on extruded filament bonding in fused filament fabrication
- (2018) Ana Elisa Costa et al. RAPID PROTOTYPING JOURNAL
- Particle emissions from fused deposition modeling 3D printers: Evaluation and meta-analysis
- (2018) Peter Byrley et al. SCIENCE OF THE TOTAL ENVIRONMENT
- Aerosol Emissions from Fuse-Deposition Modeling 3D Printers in a Chamber and in Real Indoor Environments
- (2017) Marina E. Vance et al. ENVIRONMENTAL SCIENCE & TECHNOLOGY
- Effects of material properties on warpage in fused deposition modeling parts
- (2017) Emily R. Fitzharris et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A metal additive manufacturing method: semi-solid metal extrusion and deposition
- (2017) Amin Jabbari et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Coupling 3D printing with hot-melt extrusion to produce controlled-release tablets
- (2017) Jiaxiang Zhang et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Parametric optimization of intra- and inter-layer strengths in parts produced by extrusion-based additive manufacturing of poly(lactic acid)
- (2017) Martin Spoerk et al. JOURNAL OF APPLIED POLYMER SCIENCE
- PCL and PCL-based materials in biomedical applications
- (2017) Elbay Malikmammadov et al. JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION
- Characterization of printed PLA scaffolds for bone tissue engineering
- (2017) Agathe Grémare et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites
- (2017) Xiaoyong Tian et al. JOURNAL OF CLEANER PRODUCTION
- Life Cycle Assessment of 3D Printed Products in a Distributed Manufacturing System
- (2017) Felipe Cerdas et al. JOURNAL OF INDUSTRIAL ECOLOGY
- Modeling of the chemical finishing process for polylactic acid parts in fused deposition modeling and investigation of its tensile properties
- (2017) Yifan Jin et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Estimation of filament temperature and adhesion development in fused deposition techniques
- (2017) S.F. Costa et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Characterization of chemical contaminants generated by a desktop fused deposition modeling 3-dimensional Printer
- (2017) Aleksandr B. Stefaniak et al. JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE
- The performance of the hot end in a plasticating 3D printer
- (2017) Michael E. Mackay et al. JOURNAL OF RHEOLOGY
- Deformation of an amorphous polymer during the fused-filament-fabrication method for additive manufacturing
- (2017) Claire McIlroy et al. JOURNAL OF RHEOLOGY
- Kinetics of Wetting and Spreading of Droplets over Various Substrates
- (2017) Omid Arjmandi-Tash et al. LANGMUIR
- Shrinkage and Warpage Optimization of Expanded-Perlite-Filled Polypropylene Composites in Extrusion-Based Additive Manufacturing
- (2017) Martin Spoerk et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Effect of the printing bed temperature on the adhesion of parts produced by fused filament fabrication
- (2017) Martin Spoerk et al. PLASTICS RUBBER AND COMPOSITES
- Bimodal molecular weight samples improve the isotropy of 3D printed polymeric samples
- (2017) Neiko P. Levenhagen et al. POLYMER
- Model analysis of feedstock behavior in fused filament fabrication: Enabling rapid materials screening
- (2017) Eric L. Gilmer et al. POLYMER
- Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing
- (2017) C. McIlroy et al. POLYMER
- Optimization of mechanical properties of glass-spheres-filled polypropylene composites for extrusion-based additive manufacturing
- (2017) Martin Spoerk et al. POLYMER COMPOSITES
- Preparation of poly(vinyl alcohol)/poly(lactic acid)/hydroxyapatite bioactive nanocomposites for fused deposition modeling
- (2017) Jintian Wu et al. POLYMER COMPOSITES
- Kinetic and process modeling of thermal and mechanical degradation in ultrahigh speed twin screw extrusion
- (2017) Azadeh Farahanchi et al. POLYMER DEGRADATION AND STABILITY
- Fused Deposition Modelling of high temperature polymers: Exploring CNT PEEK composites
- (2017) S. Berretta et al. POLYMER TESTING
- Overview on Additive Manufacturing Technologies
- (2017) Flaviana Calignano et al. PROCEEDINGS OF THE IEEE
- Fabrication of polymer nanocomposites via ball milling: Present status and future perspectives
- (2017) Francesco Delogu et al. PROGRESS IN MATERIALS SCIENCE
- A review on wall slip in high solid dispersions
- (2017) Michel Cloitre et al. RHEOLOGICA ACTA
- Mechanical and chemical recycling of solid plastic waste
- (2017) Kim Ragaert et al. WASTE MANAGEMENT
- Sintering of Two Viscoelastic Particles: A Computational Approach
- (2017) Caroline Balemans et al. Applied Sciences-Basel
- Mechanical Properties of Specimens 3D Printed with Virgin and Recycled Polylactic Acid
- (2017) Isabelle Anderson 3D Printing and Additive Manufacturing
- Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive review
- (2016) Shady Farah et al. ADVANCED DRUG DELIVERY REVIEWS
- Fused deposition modelling with ABS–graphene nanocomposites
- (2016) Sithiprumnea Dul et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Emissions of Ultrafine Particles and Volatile Organic Compounds from Commercially Available Desktop Three-Dimensional Printers with Multiple Filaments
- (2016) Parham Azimi et al. ENVIRONMENTAL SCIENCE & TECHNOLOGY
- Airborne particle emission of a commercial 3D printer: the effect of filament material and printing temperature
- (2016) L. Stabile et al. INDOOR AIR
- Hot-melt extruded filaments based on pharmaceutical grade polymers for 3D printing by fused deposition modeling
- (2016) Alice Melocchi et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Adaptation of pharmaceutical excipients to FDM 3D printing for the fabrication of patient-tailored immediate release tablets
- (2016) Muzna Sadia et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- The effect of two commercial melt strength enhancer additives on the thermal, rheological and morphological properties of polylactide
- (2016) Montserrat Hernández-Alamilla et al. JOURNAL OF POLYMER ENGINEERING
- Life Cycle Assessment of Poly(Lactic Acid) (PLA): Comparison Between Chemical Recycling, Mechanical Recycling and Composting
- (2016) Marina F. Cosate de Andrade et al. JOURNAL OF POLYMERS AND THE ENVIRONMENT
- Emission of particulate matter from a desktop three-dimensional (3D) printer
- (2016) Jinghai Yi et al. JOURNAL OF TOXICOLOGY AND ENVIRONMENTAL HEALTH-PART A-CURRENT ISSUES
- A Lower Temperature FDM 3D Printing for the Manufacture of Patient-Specific Immediate Release Tablets
- (2016) Tochukwu C. Okwuosa et al. PHARMACEUTICAL RESEARCH
- Investigations for melt flow index of Nylon6-Fe composite based hybrid FDM filament
- (2016) Harish Garg et al. RAPID PROTOTYPING JOURNAL
- Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing
- (2016) Zixiang Weng et al. MATERIALS & DESIGN
- 3D printing of wood fibre biocomposites: From mechanical to actuation functionality
- (2016) A. Le Duigou et al. MATERIALS & DESIGN
- Hot-Melt Extrusion: from Theory to Application in Pharmaceutical Formulation
- (2015) Hemlata Patil et al. AAPS PHARMSCITECH
- Multi-nozzle extrusion system for 3D printer and its control mechanism
- (2015) Md. Hazrat Ali et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Rheology as a tool for evaluation of melt processability of innovative dosage forms
- (2015) Johanna Aho et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Moisture sorption in polyamide 6.6: Experimental investigation and comparison to four physical-based models
- (2015) M. Broudin et al. POLYMER TESTING
- Expanding the applicability of FDM-type technologies through materials development
- (2015) David Roberson et al. RAPID PROTOTYPING JOURNAL
- Polymer recycling codes for distributed manufacturing with 3-D printers
- (2015) Emily J. Hunt et al. RESOURCES CONSERVATION AND RECYCLING
- Fused deposition modeling with polypropylene
- (2015) O.S. Carneiro et al. MATERIALS & DESIGN
- Highly oriented carbon fiber–polymer composites via additive manufacturing
- (2014) Halil L. Tekinalp et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament
- (2014) M.A. Kreiger et al. JOURNAL OF CLEANER PRODUCTION
- Thermo-mechanical Characterization of Metal/Polymer Composite Filaments and Printing Parameter Study for Fused Deposition Modeling in the 3D Printing Process
- (2014) Seyeon Hwang et al. JOURNAL OF ELECTRONIC MATERIALS
- The importance of carbon fiber to polymer additive manufacturing
- (2014) Lonnie J. Love et al. JOURNAL OF MATERIALS RESEARCH
- Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions
- (2014) B.M. Tymrak et al. MATERIALS & DESIGN
- A review of melt extrusion additive manufacturing processes: I. Process design and modeling
- (2014) Brian N. Turner et al. RAPID PROTOTYPING JOURNAL
- The hygroscopic behavior of plant fibers: a review
- (2014) Amandine Célino et al. Frontiers in Chemistry
- Chemical Recycling of PLA: A Great Opportunity Towards the Sustainable Development?
- (2013) V. Piemonte et al. JOURNAL OF POLYMERS AND THE ENVIRONMENT
- Effect of NR on the hydrolytic degradation of PLA
- (2013) Yun Huang et al. POLYMER DEGRADATION AND STABILITY
- Photochemical Behavior of Polylactide/ZnO Nanocomposite Films
- (2012) Sandrine Therias et al. BIOMACROMOLECULES
- Melt Strength and Extensional Viscosity of Low-Density Polyethylene and Poly(butylene succinate) Blends Using a Melt-Spinning Technique
- (2012) Jia Yang et al. Journal of Macromolecular Science Part B-Physics
- Suitability of PLA/TCP for fused deposition modeling
- (2012) Dietmar Drummer et al. RAPID PROTOTYPING JOURNAL
- Rheological modeling of the diffusion process and the interphase of symmetrical bilayers based on PVDF and PMMA with varying molecular weights
- (2012) Huagui Zhang et al. RHEOLOGICA ACTA
- Dispersion of Carbon Nanotubes: Mixing, Sonication, Stabilization, and Composite Properties
- (2012) Yan Yan Huang et al. Polymers
- Biodegradable poly(L-lactic acid)/TiO2 nanocomposites: Thermal properties and degradation
- (2011) Aleksandra Buzarovska et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling
- (2011) M. Nikzad et al. MATERIALS & DESIGN
- Experimental investigation and empirical modelling of FDM process for compressive strength improvement
- (2011) Anoop K. Sood et al. Journal of Advanced Research
- Structure–property relationships in polyamide 12/halloysite nanotube nanocomposites
- (2010) B. Lecouvet et al. POLYMER DEGRADATION AND STABILITY
- Experimental study aiming to enhance the surface finish of fused deposition modeled parts
- (2009) L.M. Galantucci et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Extrusion of five biopolymers reinforced with increasing wood flour concentration on a production machine, injection moulding and mechanical performance
- (2009) Eva Sykacek et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- A comparative study on the electrical and mechanical behaviour of multi-walled carbon nanotube composites prepared by diluting a masterbatch with various types of polypropylenes
- (2009) Matej Mičušík et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Minimum Amount of Binder Removal Required during Solvent Debinding of Powder-Injection-Molded Compacts
- (2009) Yang-Liang Fan et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructural Characterization and Mechanical Properties of Si3N4Formed by Fused Deposition of Ceramics
- (2008) S. Iyer et al. International Journal of Applied Ceramic Technology
- Influence of twin-screw extrusion conditions on the dispersion of multi-walled carbon nanotubes in a poly(lactic acid) matrix
- (2008) Tobias Villmow et al. POLYMER
- Effects of extrusion conditions on die-swell behavior of polypropylene/diatomite composite melts
- (2008) J.Z. Liang POLYMER TESTING
- Effect of processing conditions on the bonding quality of FDM polymer filaments
- (2008) Q. Sun et al. RAPID PROTOTYPING JOURNAL
Become a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get StartedAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started