Effect of Material and Process Specific Factors on the Strength of Printed Parts in Fused Filament Fabrication: A Review of Recent Developments
Published 2019 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Effect of Material and Process Specific Factors on the Strength of Printed Parts in Fused Filament Fabrication: A Review of Recent Developments
Authors
Keywords
-
Journal
Materials
Volume 12, Issue 10, Pages 1664
Publisher
MDPI AG
Online
2019-05-23
DOI
10.3390/ma12101664
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- In-process thermal treatment of polylactic acid in fused deposition modelling
- (2019) Muhammad Harris et al. MATERIALS AND MANUFACTURING PROCESSES
- Enhanced through-plane thermal conductivity of polyamide 6 composites with vertical alignment of boron nitride achieved by fused deposition modeling
- (2019) Yi Geng et al. POLYMER COMPOSITES
- Three-dimensional printing of poly(lactic acid) bio-based composites with sugarcane bagasse fiber: Effect of printing orientation on tensile performance
- (2019) Hao Liu et al. POLYMERS FOR ADVANCED TECHNOLOGIES
- Machines as Craftsmen: Localized Parameter Setting Optimization for Fused Filament Fabrication 3D Printing
- (2019) John M. Gardner et al. Advanced Materials Technologies
- Impact of Chemical Post-Processing in Fused Deposition Modelling (FDM) on Polylactic Acid (PLA) Surface Quality and Structure
- (2019) Ana Valerga et al. Polymers
- 3D-Printable PP/SEBS Thermoplastic Elastomeric Blends: Preparation and Properties
- (2019) Shib Banerjee et al. Polymers
- Medical-Grade PCL Based Polyurethane System for FDM 3D Printing—Characterization and Fabrication
- (2019) Agnieszka Haryńska et al. Materials
- Characterization of the Mechanical Properties of FFF Structures and Materials: A Review on the Experimental, Computational and Theoretical Approaches
- (2019) Enrique Cuan-Urquizo et al. Materials
- Reactive Compatibilization of PLA/PA11 Blends and Their Application in Additive Manufacturing
- (2019) Damien Rasselet et al. Materials
- Effect of printing layer thickness on water absorption and mechanical properties of 3D-printed wood/PLA composite materials
- (2019) Nadir Ayrilmis et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Crazing in additively manufactured acrylonitrile butadiene styrene
- (2019) Kaitlynn M. Conway et al. ENGINEERING FRACTURE MECHANICS
- Research progress of ceramic matrix composite parts based on additive manufacturing technology
- (2019) Zhongliang Lu et al. Virtual and Physical Prototyping
- Sustainable composite fused deposition modelling filament using recycled pre-consumer polypropylene
- (2018) David Stoof et al. COMPOSITES PART B-ENGINEERING
- Interfacial bonding strength of short carbon fiber/acrylonitrile-butadiene-styrene composites fabricated by fused deposition modeling
- (2018) Wei Zhang et al. COMPOSITES PART B-ENGINEERING
- Additive layer manufacturing of poly (ether ether ketone) via FDM
- (2018) Marianna Rinaldi et al. COMPOSITES PART B-ENGINEERING
- Fabrication of flexible wood flour/thermoplastic polyurethane elastomer composites using fused deposition molding
- (2018) Hongjie Bi et al. INDUSTRIAL CROPS AND PRODUCTS
- Design and development of an extrusion system for 3D printing biopolymer pellets
- (2018) Sean Whyman et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Mechanical properties of fiber reinforced polymer composites: A comparative study of conventional and additive manufacturing methods
- (2018) Kuldeep Agarwal et al. JOURNAL OF COMPOSITE MATERIALS
- Microstructure and mechanical properties of three dimensional-printed continuous fiber composites
- (2018) Cagri Oztan et al. JOURNAL OF COMPOSITE MATERIALS
- Tensile properties, void contents, dispersion and fracture behaviour of 3D printed carbon nanofiber reinforced composites
- (2018) Easir Arafat Papon et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Enhancement of Mechanical Properties of FDM-PLA Parts via Thermal Annealing
- (2018) Radoslaw A. Wach et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Interlayer diffusion of surface segregating additives to improve the isotropy of fused deposition modeling products
- (2018) Neiko P. Levenhagen et al. POLYMER
- Study of processing parameters in fused deposition modeling based on mechanical properties of acrylonitrile-butadiene-styrene filament
- (2018) Bai Huang et al. POLYMER ENGINEERING AND SCIENCE
- Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling
- (2018) M.A. Caminero et al. POLYMER TESTING
- Preparation and characterization of 3D printed continuous carbon fiber reinforced thermosetting composites
- (2018) Wenfeng Hao et al. POLYMER TESTING
- Adhesion of 3D printed material on textile substrates
- (2018) Nils Grimmelsmann et al. RAPID PROTOTYPING JOURNAL
- Exposures during industrial 3-D printing and post-processing tasks
- (2018) Sonette Du Preez et al. RAPID PROTOTYPING JOURNAL
- Mechanical Properties Optimization of Poly-Ether-Ether-Ketone via Fused Deposition Modeling
- (2018) Xiaohu Deng et al. Materials
- Preliminary Investigation of Poly-Ether-Ether-Ketone Based on Fused Deposition Modeling for Medical Applications
- (2018) Feng Zhao et al. Materials
- Effect of Printing Parameters on Tensile, Dynamic Mechanical, and Thermoelectric Properties of FDM 3D Printed CABS/ZnO Composites
- (2018) et al. Materials
- A 3D-Printable Polymer-Metal Soft-Magnetic Functional Composite—Development and Characterization
- (2018) Bilal Khatri et al. Materials
- Performance of biocompatible PEEK processed by fused deposition additive manufacturing
- (2018) M.F. Arif et al. MATERIALS & DESIGN
- Properties of oriented carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling
- (2018) Guangxin Liao et al. MATERIALS & DESIGN
- A study of creep in polycarbonate fused deposition modelling parts
- (2018) Antonio G. Salazar-Martín et al. MATERIALS & DESIGN
- Modelling, and characterization of 3D printed cellular structures
- (2018) Michał Kucewicz et al. MATERIALS & DESIGN
- Flexural fatigue properties of polycarbonate fused-deposition modelling specimens
- (2018) Josep M. Puigoriol-Forcada et al. MATERIALS & DESIGN
- Screw extrusion-based additive manufacturing of PEEK
- (2018) Jian-Wei Tseng et al. MATERIALS & DESIGN
- Bio-polyethylene reinforced with thermomechanical pulp fibers: Mechanical and micromechanical characterization and its application in 3D-printing by fused deposition modelling
- (2018) Q. Tarrés et al. COMPOSITES PART B-ENGINEERING
- Investigation of ABS-rice straw composite feedstock filament for FDM
- (2018) Mohammed Ali Osman et al. RAPID PROTOTYPING JOURNAL
- Influence of PLA Filament Conditions on Characteristics of FDM Parts
- (2018) Ana Valerga et al. Materials
- Extrusion-Based 3D Printing of Microfluidic Devices for Chemical and Biomedical Applications: A Topical Review
- (2018) Daniela Pranzo et al. Micromachines
- The effect of process parameters on tensile behavior of 3D printed flexible parts of ethylene vinyl acetate (EVA)
- (2018) Narendra Kumar et al. Journal of Manufacturing Processes
- Polyurethanes as a Potential Medical-Grade Filament for Use in Fused Deposition Modeling 3D Printers – a Brief Review
- (2018) Agnieszka Przybytek et al. FIBRES & TEXTILES IN EASTERN EUROPE
- Improving mechanical properties of continuous fiber-reinforced thermoplastic composites produced by FDM 3D printer
- (2018) Behnam Akhoundi et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Experimental investigations on natural fiber embedded additive manufacturing-based biodegradable structures for biomedical applications
- (2018) Amarveer Singh Mangat et al. RAPID PROTOTYPING JOURNAL
- Computer Numerical Controlled Grinding and Physical Vapor Deposition for Fused Deposition Modelled Workpieces
- (2018) Fulvio Lavecchia et al. Advances in Materials Science and Engineering
- Effects of extrusion speed and printing speed on the 3D printing stability of extruded PEEK filament
- (2018) Peng Geng et al. Journal of Manufacturing Processes
- Preparation of polypropylene/short glass fiber composite as Fused Deposition Modeling (FDM) filament
- (2018) Gholamhossein Sodeifian et al. Results in Physics
- Assessment of different polymers and drug loads for fused deposition modeling of drug loaded implants
- (2017) Wiebke Kempin et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- 3D printing of oral drugs: a new reality or hype?
- (2017) Wen-Kai Hsiao et al. Expert Opinion on Drug Delivery
- Surface roughness of FDM parts after post-processing with acetone vapor bath smoothing process
- (2017) Amirali Lalehpour et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material
- (2017) Chuncheng Yang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Bimodal molecular weight samples improve the isotropy of 3D printed polymeric samples
- (2017) Neiko P. Levenhagen et al. POLYMER
- Effect of fused layer modeling (FLM) processing parameters on impact strength of cellular polypropylene
- (2017) Lu Wang et al. POLYMER
- Improving the impact strength of Poly(lactic acid) (PLA) in fused layer modeling (FLM)
- (2017) Lu Wang et al. POLYMER
- Preparation of poly(vinyl alcohol)/poly(lactic acid)/hydroxyapatite bioactive nanocomposites for fused deposition modeling
- (2017) Jintian Wu et al. POLYMER COMPOSITES
- Characterisation, biodegradability and application of palm fibre-reinforced polyhydroxyalkanoate composites
- (2017) Chin-San Wu et al. POLYMER DEGRADATION AND STABILITY
- Cellulose nanofibril-reinforced polypropylene composites for material extrusion: Rheological properties
- (2017) Lu Wang et al. POLYMER ENGINEERING AND SCIENCE
- Compatibilizer Assistant SCF/ABS Composites with Improved Mechanical Properties Prepared by Fused Deposition Modeling
- (2017) Jin Zhu et al. POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING
- Pre and post processing techniques to improve surface characteristics of FDM parts: a state of art review and future applications
- (2017) Jasgurpreet Singh Chohan et al. RAPID PROTOTYPING JOURNAL
- 3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance
- (2017) Chuncheng Yang et al. RAPID PROTOTYPING JOURNAL
- Material issues in additive manufacturing: A review
- (2017) Sunpreet Singh et al. Journal of Manufacturing Processes
- Thin-walled high temperature alloy structures fabricated from additively manufactured polymer templates
- (2017) John H. Martin et al. MATERIALS & DESIGN
- Measurements of the mechanical response of unidirectional 3D-printed PLA
- (2017) Y. Song et al. MATERIALS & DESIGN
- Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection
- (2017) J.M. Chacón et al. MATERIALS & DESIGN
- A critical review of the use of 3-D printing in the construction industry
- (2016) Peng Wu et al. AUTOMATION IN CONSTRUCTION
- Fused deposition modelling with ABS–graphene nanocomposites
- (2016) Sithiprumnea Dul et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
- (2016) Xiaoyong Tian et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Preparation of starch/acrylonitrile-butadiene-styrene copolymers (ABS) biomass alloys and their feasible evaluation for 3D printing applications
- (2016) Chao-Chung Kuo et al. COMPOSITES PART B-ENGINEERING
- Development of in-house composite wire based feed stock filaments of fused deposition modelling for wear-resistant materials and structures
- (2016) Rupinder Singh et al. COMPOSITES PART B-ENGINEERING
- 3D printing with polymers: Challenges among expanding options and opportunities
- (2016) Jeffrey W. Stansbury et al. DENTAL MATERIALS
- Retrofitment, open-sourcing, and characterisation of a legacy fused deposition modelling system
- (2016) Arno Ferreira et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Robot-assisted 3D printing of biopolymer thin shells
- (2016) Byron James Brooks et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Fused-filament 3D printing of drug products: Microstructure analysis and drug release characteristics of PVA-based caplets
- (2016) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D scanning and printing skeletal tissues for anatomy education
- (2016) Daniel B. Thomas et al. JOURNAL OF ANATOMY
- Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties
- (2016) Fuda Ning et al. JOURNAL OF COMPOSITE MATERIALS
- Fused Deposition Technique for Continuous Fiber Reinforced Thermoplastic
- (2016) Paolo Bettini et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing
- (2016) Nanya Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Modulation, functionality, and cytocompatibility of three-dimensional printing materials made from chitosan-based polysaccharide composites
- (2016) Chin-San Wu Materials Science & Engineering C-Materials for Biological Applications
- Experimental investigations for development of Nylon6-Al-Al2O3 alternative FDM filament
- (2016) Kamaljit Singh Boparai et al. RAPID PROTOTYPING JOURNAL
- Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory
- (2016) Caterina Casavola et al. MATERIALS & DESIGN
- Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing
- (2016) Zixiang Weng et al. MATERIALS & DESIGN
- A novel approach to improve mechanical properties of parts fabricated by fused deposition modeling
- (2016) Jianlei Wang et al. MATERIALS & DESIGN
- 3D printing of wood fibre biocomposites: From mechanical to actuation functionality
- (2016) A. Le Duigou et al. MATERIALS & DESIGN
- Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
- (2016) Ryosuke Matsuzaki et al. Scientific Reports
- Meteorosensitive architecture: Biomimetic building skins based on materially embedded and hygroscopically enabled responsiveness
- (2015) Steffen Reichert et al. COMPUTER-AIDED DESIGN
- Hygromorphic materials for sustainable responsive architecture
- (2015) Artem Holstov et al. CONSTRUCTION AND BUILDING MATERIALS
- Tissue vascularization through 3D printing: Will technology bring us flow?
- (2015) S.J. Paulsen et al. DEVELOPMENTAL DYNAMICS
- Structure–mechanical property relationship in fused deposition modelling
- (2015) H. Rezayat et al. MATERIALS SCIENCE AND TECHNOLOGY
- The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3-D printer
- (2015) Antonio Lanzotti et al. RAPID PROTOTYPING JOURNAL
- Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS
- (2015) Wenzheng Wu et al. Materials
- Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts
- (2015) Miquel Domingo-Espin et al. MATERIALS & DESIGN
- Fused deposition modeling with polypropylene
- (2015) O.S. Carneiro et al. MATERIALS & DESIGN
- Bioprinting and Tissue Engineering: Recent Advances and Future Perspectives
- (2015) Dror Seliktar et al. ISRAEL JOURNAL OF CHEMISTRY
- Bio-Inspired Wooden Actuators for Large Scale Applications
- (2015) Markus Rüggeberg et al. PLoS One
- Highly oriented carbon fiber–polymer composites via additive manufacturing
- (2014) Halil L. Tekinalp et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Novel ABS-based binary and ternary polymer blends for material extrusion 3D printing
- (2014) Carmen R. Rocha et al. JOURNAL OF MATERIALS RESEARCH
- The importance of carbon fiber to polymer additive manufacturing
- (2014) Lonnie J. Love et al. JOURNAL OF MATERIALS RESEARCH
- Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions
- (2014) B.M. Tymrak et al. MATERIALS & DESIGN
- PLA/chitosan/keratin composites for biomedical applications
- (2014) Constantin Edi Tanase et al. Materials Science & Engineering C-Materials for Biological Applications
- 3D bioprinting of tissues and organs
- (2014) Sean V Murphy et al. NATURE BIOTECHNOLOGY
- On reducing anisotropy in 3D printed polymers via ionizing radiation
- (2014) Steven Shaffer et al. POLYMER
- Mechanical properties of commercial rapid prototyping materials
- (2014) Jaroslaw Kotlinski RAPID PROTOTYPING JOURNAL
- Deposition direction-dependent failure criteria for fused deposition modeling polycarbonate
- (2014) Nevin Hill et al. RAPID PROTOTYPING JOURNAL
- Active origami by 4D printing
- (2014) Qi Ge et al. Smart Materials and Structures
- Metallization on FDM Parts Using the Chemical Deposition Technique
- (2014) Azhar Equbal et al. Coatings
- Tensile and thermomechanical properties of short carbon fiber reinforced polyamide 6 composites
- (2013) Nevin Gamze Karsli et al. COMPOSITES PART B-ENGINEERING
- Effects of extreme surface roughness on 3D printed horn antenna
- (2013) C.R. Garcia et al. ELECTRONICS LETTERS
- The Roles of Traditional Chinese Medicine: Shen-Fu Injection on the Postresuscitation Care Bundle
- (2013) Qian Zhang et al. Evidence-based Complementary and Alternative Medicine
- Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices
- (2013) Eric J. McCullough et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Selective laser sintering/melting (SLS/SLM) of pure Al, Al–Mg, and Al–Si powders: Effect of processing conditions and powder properties
- (2013) E.O. Olakanmi JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Bone tissue engineering using 3D printing
- (2013) Susmita Bose et al. Materials Today
- 3D printing of multifunctional nanocomposites
- (2013) Thomas A. Campbell et al. Nano Today
- Structural characteristics of fused deposition modeling polycarbonate material
- (2013) Walter Castro Smith et al. POLYMER TESTING
- 3D roughness profile model in fused deposition modelling
- (2013) Alberto Boschetto et al. RAPID PROTOTYPING JOURNAL
- Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology
- (2012) Tao Xu et al. BIOMATERIALS
- Influence of thermal history on the mechanical properties of carbon fiber–acrylate composites cured by electron beam and thermal processes
- (2012) F. Vautard et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
- (2012) M.M. Kabir et al. COMPOSITES PART B-ENGINEERING
- A review on the degradability of polymeric composites based on natural fibres
- (2012) Z.N. Azwa et al. MATERIALS & DESIGN
- Suitability of PLA/TCP for fused deposition modeling
- (2012) Dietmar Drummer et al. RAPID PROTOTYPING JOURNAL
- Additive manufacturing: rapid prototyping comes of age
- (2012) Ian Campbell et al. RAPID PROTOTYPING JOURNAL
- The carbon fiber surface treatment and addition of PA6 on tensile properties of ABS composites
- (2010) J. Li et al. CURRENT APPLIED PHYSICS
- Effects of layer thickness and binder saturation level parameters on 3D printing process
- (2010) Mohammad Vaezi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The Effect of Layer Orientation on the Mechanical Properties and Microstructure of a Polymer
- (2010) V. Vega et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Parametric appraisal of mechanical property of fused deposition modelling processed parts
- (2009) Anoop Kumar Sood et al. MATERIALS & DESIGN
- A review of process development steps for new material systems in three dimensional printing (3DP)
- (2009) Ben Utela et al. Journal of Manufacturing Processes
- Interfacial studies on the O3 modified carbon fiber-reinforced polyamide 6 composites
- (2008) J. Li APPLIED SURFACE SCIENCE
- Effect of fiber length on thermomechanical properties of short carbon fiber reinforced polypropylene composites
- (2008) F. Rezaei et al. MATERIALS & DESIGN
- Fused deposition modelling of an auricle framework for microtia reconstruction based on CT images
- (2008) Wen Zeng et al. RAPID PROTOTYPING JOURNAL
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now