Microstructure and Mechanical Properties of Severely Deformed Eutectic Al–Si–Cu–Mn Alloy

Achieving excellent mechanical properties in type 316 stainless steel by tailoring grain size in homogeneously recovered or recrystallized nanostructures

(2022) Maowen Liu et al.   ACTA MATERIALIA

Influence of Multi-directional Room-Temperature Forging Process on Microstructure and Mechanical Behaviour of Eutectic Al-12Si Alloy

(2022) B. Kumara et al.   Metallography Microstructure and Analysis

Enhanced grain refinement of Al-Si alloys by novel Al-V-B refiners

(2021) Chenxi Zhao et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Effect of multi-pass multi-directional forging on tribological properties of Si-rich eutectoid ZA alloys

(2021) D. YOUSEFI et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Developing a high-strength Al–11Si alloy with improved ductility by combining ECAP and cryorolling

(2020) Dan Song et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure, texture evolution and mechanical properties of multi-directional forged Mg-13Gd-4Y–2Zn-0.5Zr alloy under decreasing temperature

(2020) Beibei Dong et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Increasing strength and ductility of a Mg–9Al alloy by dynamic precipitation assisted grain refinement during multi-directional forging

(2020) Jiansheng Wei et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Influence of cryogenic deformation on second-phase particles, grain structure, and mechanical properties of Al–Cu–Mn alloy

(2020) Fei Dong et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Composition-dependent dynamic precipitation and grain refinement in Al-Si system under high-pressure torsion

(2020) Shenbao Jin et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Effect introduced high density of precipitates on the microstructural evolutions during multi-direction forging of Al–Zn–Mg–Cu alloy

(2020) Jiuhui Zhao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Grain refining with DDRX by isothermal MDF of Al-Zn-Mg-Cu alloy

(2020) Jiuhui Zhao et al.   Journal of Materials Research and Technology-JMR&T

Precipitation and aging phenomena in an ultrafine grained Al-Zn alloy by severe plastic deformation

(2020) Yonghao Zhao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of multi-directional hot forging process on the microstructure and mechanical properties of Al–Si based alloy containing high amount of Zn and Cu

(2020) Yasin Alemdag et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Changes of Microstructures and Mechanical Properties in Commercially Pure Titanium after Different Cycles of Proposed Multi-Directional Forging

(2019) Zhanguang Zheng et al.   Metals

Effect of Mn Addition on the Mechanical Properties of Al–12.6Si Alloy: Role of Al15(MnFe)3Si2 Intermetallic and Microstructure Modification

(2019) Prosanta Biswas et al.   METALS AND MATERIALS INTERNATIONAL

Effects of Mn Content on Microstructure, Mechanical and Dry Sliding Wear Properties of Eutectic Al–Si–Cu Alloy

(2019) Yasin Alemdag et al.   METALS AND MATERIALS INTERNATIONAL

Formation of Al15Mn3Si2 Phase During Solidification of a Novel Al-12%Si-4%Cu-1.2%Mn Heat-Resistant Alloy and Its Thermal Stability

(2018) Xiaojing Suo et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Cr-induced morphology change of primary Mn-rich phase in Al-Si-Cu-Mn heat resistant aluminum alloys and its contribution to high temperature strength

(2018) Guangjin Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effects of deformation temperature on second-phase particles and mechanical properties of 2219 Al-Cu alloy

(2018) Hailin He et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Two quite different primary Mn-rich phases in Al-Si-Cu-Mn heat-resistant alloy and its effect to mechanical properties

(2018) Guangjing Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

An approach for room-temperature multi-directional forging of pure titanium for strengthening

(2018) H. Miura et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Dynamic precipitation, segregation and strengthening of an Al-Zn-Mg-Cu alloy (AA7075) processed by high-pressure torsion

(2018) Yidong Zhang et al.   ACTA MATERIALIA

Structural evolutions of metallic materials processed by severe plastic deformation

(2018) Yang Cao et al.   MATERIALS SCIENCE & ENGINEERING R-REPORTS

Dispersoid particles precipitated during the solutionizing course of Al-12 wt%Si-4 wt%Cu-1.2 wt%Mn alloy and their influence on high temperature strength

(2017) Hengcheng Liao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of non-equilibrium heat treatments on microstructure and tensile properties of an Al-Si-Cu alloy

(2016) I. Bacaicoa et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A coupled EBSD/TEM study of the microstructural evolution of multi-axial compressed pure Al and Al–Mg alloy

(2016) Xiaohui Yang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Influence of cumulative strain on microstructure and mechanical properties of multi-directional forged 2A14 aluminum alloy

(2016) Ming Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of Multi Directional Forging on the Microstructure and Mechanical Properties of Zn-24 wt% Al-2 wt% Cu Alloy

(2016) P. C. Sharath et al.   TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS

Microstructures and mechanical properties of AZ61 magnesium alloy after isothermal multidirectional forging with increasing strain rate

(2015) Juqiang Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and mechanical properties of Al-7075 alloy processed by equal channel angular pressing combined with aging treatment

(2014) M.H. Shaeri et al.   MATERIALS & DESIGN

Structure uniformity and limits of grain refinement of high purity aluminum during multi-directional forging process at room temperature

(2014) Qing-feng ZHU et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Extreme grain refinement by severe plastic deformation: A wealth of challenging science

(2013) Y. Estrin et al.   ACTA MATERIALIA

Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy

(2013) Kaka Ma et al.   ACTA MATERIALIA

Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions

(2013) Taku Sakai et al.   PROGRESS IN MATERIALS SCIENCE

Softening of Al during multi-axial forging in a channel die

(2012) R. Kapoor et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Nanostructured aluminium alloys produced by severe plastic deformation: New horizons in development

(2012) I. Sabirov et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Precipitation of partially coherent α-Al(Mn,Fe)Si dispersoids and their strengthening effect in AA 3003 alloy

(2011) Y.J. Li et al.   ACTA MATERIALIA

Effect of Fe-rich intermetallics on the wear behavior of eutectic Al–Si piston alloy (LM13)

(2010) V. Abouei et al.   MATERIALS & DESIGN

Microstructural evolution and mechanical properties of severely deformed Al-12Si casting alloy by equal-channel angular extrusion

(2010) Gencaga Purcek et al.   METALS AND MATERIALS INTERNATIONAL

Tensile properties and fracture characteristics of ECAP-processed Al and Al-Cu alloys

(2010) Mohamed Ibrahim Abd El Aal et al.   METALS AND MATERIALS INTERNATIONAL

Semisolid processing of near-eutectic and hypereutectic Al–Si–Cu alloys

(2008) Yucel Birol   JOURNAL OF MATERIALS SCIENCE

The effects of Mn additions on the microstructure and mechanical properties of Al–Si–Cu casting alloys

(2008) J.Y. Hwang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructural evolution in pure aluminum processed by high-pressure torsion

(2008) Yuki Ito et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructural development during equal channel angular pressing of hypo-eutectic Al–Si casting alloy by different processing routes

(2007) J.M. García-Infanta et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of the deformation path on the ductility of a hypoeutectic Al–Si casting alloy subjected to equal-channel angular pressing by routes A, BA, BC and C

(2007) J.M. García-Infanta et al.   SCRIPTA MATERIALIA