Changes of Microstructures and Mechanical Properties in Commercially Pure Titanium after Different Cycles of Proposed Multi-Directional Forging

The Effect of Isothermal Multi-Directional Forging on the Grain Structure, Superplasticity, and Mechanical Properties of the Conventional Al–Mg-Based Alloy

(2019) Anastasia Mikhaylovskaya et al.   Metals

Strengthening mechanisms and Hall-Petch stress of ultrafine grained Al-0.3%Cu

(2018) Tianlin Huang et al.   ACTA MATERIALIA

Modeling of intragranular misorientation and grain fragmentation in polycrystalline materials using the viscoplastic self-consistent formulation

(2018) Miroslav Zecevic et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Nanoscale deformation of multiaxially forged ultrafine-grained Mg-2Zn-2Gd alloy with high strength-high ductility combination and comparison with the coarse-grained counterpart

(2018) K. Li et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Mechanical behavior and texture development of over-aged and solution treated Al-Cu-Mg alloy during multi-directional forging

(2018) Saeed Khani Moghanaki et al.   MATERIALS CHARACTERIZATION

On the link between fracture toughness, tensile strength, and fracture process zone in anisotropic rocks

(2018) Nathan Dutler et al.   ENGINEERING FRACTURE MECHANICS

Enhanced mechanical property of AZ31B magnesium alloy processed by multi-directional forging method

(2017) Chen Cai et al.   MATERIALS CHARACTERIZATION

The evolutions of microstructure and mechanical properties of 2.25Cr-1Mo-0.25V steel with different initial microstructures during tempering

(2017) Zhonghua Jiang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure evolution and mechanical properties of Mg-Gd-Y-Ag-Zr alloy fabricated by multidirectional forging and ageing treatment

(2017) Bizheng Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Grain fragmentation in ultrasonic-assisted TIG weld of pure aluminum

(2017) Qihao Chen et al.   ULTRASONICS SONOCHEMISTRY

Formation and Microstructure of Ultrafine-Grained Titanium Processed by Multi-Directional Forging

(2016) Bingfeng Wang et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Nanostructure formation during accumulative roll bonding of commercial purity titanium

(2016) Mohsen Karimi et al.   MATERIALS CHARACTERIZATION

A comparative study on the microstructure and mechanical behavior of titanium: Ultrafine grain vs. coarse grain

(2016) Xiangyu Sun et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of critical temperatures on microstructures and mechanical properties of Nb–Ti stabilized IF steel processed by multiaxial forging

(2016) Sumit Ghosh et al.   MATERIALS & DESIGN

Study on the relationship between microstructure and mechanical property in a metastable β titanium alloy

(2015) C. Li et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The microstructural evolution and thermo-mechanical behavior of UFG Ti processed via equal channel angular pressing

(2015) Christopher S. Meredith et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Fatigue Performance of Mg-Zn-Zr Alloy Processed by Hot Severe Plastic Deformation

(2015) Evgeni Vasilev et al.   Metals

Microstructure, texture and mechanical properties in an as-cast AZ61 Mg alloy during multi-directional impact forging and subsequent heat treatment

(2015) M.G. Jiang et al.   MATERIALS & DESIGN

Cryogenic equal channel angular pressing of commercially pure titanium: microstructure and properties

(2014) A. V. Podolskiy et al.   JOURNAL OF MATERIALS SCIENCE

Effect of two-step severe plastic deformation on the microstructure and mechanical properties of commercial purity titanium

(2014) Kaveh Hajizadeh et al.   METALS AND MATERIALS INTERNATIONAL

Microstructure and mechanical properties of isothermal multi-axial forging formed AZ61 Mg alloy

(2013) Xiang-sheng XIA et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Comparison of microstructures and mechanical properties between forging and rolling processes for commercially pure titanium

(2012) Chun XU et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Orientation dependencies of mechanical response, microstructure and texture evolution in hot compression of AZ31 magnesium alloy processed by equal channel angular extrusion

(2011) Donghong Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Dynamic recrystallization mechanisms operating in a Ni–20%Cr alloy under hot-to-warm working

(2010) N. Dudova et al.   ACTA MATERIALIA

Texture evolution in commercially pure titanium after warm equal channel angular extrusion

(2010) Satyam Suwas et al.   ACTA MATERIALIA

Vickers and Knoop Micro-hardness Behavior of Coarse-and Ultrafine-grained Titanium

(2010) K.P. Sanosh et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Ultrafine-grained steel fabricated using warm multiaxial forging: Microstructure and mechanical properties

(2009) A.K. Padap et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and mechanical properties of TA15 titanium alloy under multi-step local loading forming

(2009) Zhichao Sun et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Strength and fatigue properties enhancement in ultrafine-grained Ti produced by severe plastic deformation

(2008) I. P. Semenova et al.   JOURNAL OF MATERIALS SCIENCE