Achieving excellent mechanical properties in type 316 stainless steel by tailoring grain size in homogeneously recovered or recrystallized nanostructures

Achieving large super-elasticity through changing relative easiness of deformation modes in Ti-Nb-Mo alloy by ultra-grain refinement

(2021) Bingjie Zhang et al.   Materials Research Letters

Anisotropic strengthening of nanotwin bundles in heterogeneous nanostructured Cu: Effect of deformation compatibility

(2021) H.Z. Zhao et al.   ACTA MATERIALIA

Corrigendum to ‘Strategy for Managing Both High Strength and Large Ductility in Structural Materials - sequential nucleation of different deformation modes based on a concept of plaston’ [Scripta Materialia 181 (2020) 35-42/ SMM 13102]

(2021) Nobuhiro Tsuji et al.   SCRIPTA MATERIALIA

Grain size altering yielding mechanisms in ultrafine grained high-Mn austenitic steel: Advanced TEM investigations

(2021) Chang-Yu Hung et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Strategy for managing both high strength and large ductility in structural materials–sequential nucleation of different deformation modes based on a concept of plaston

(2020) Nobuhiro Tsuji et al.   SCRIPTA MATERIALIA

Two-stage Hall-Petch relationship in Cu with recrystallized structure

(2020) Y.Z. Tian et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Transition of dominant deformation mode in bulk polycrystalline pure Mg by ultra-grain refinement down to sub-micrometer

(2020) Ruixiao Zheng et al.   ACTA MATERIALIA

Strengthening mechanisms and Hall-Petch stress of ultrafine grained Al-0.3%Cu

(2018) Tianlin Huang et al.   ACTA MATERIALIA

Microstructure evolution and enhanced mechanical properties in SUS316LN steel processed by high pressure torsion at room temperature

(2018) Shouwen Shi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Influence of Annealing on Microstructure and Mechanical Properties of a Nanocrystalline CrCoNi Medium-Entropy Alloy

(2018) Benjamin Schuh et al.   Materials

Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review

(2018) Y. Kok et al.   MATERIALS & DESIGN

Mechanism of high yield strength and yield ratio of 316 L stainless steel by additive manufacturing

(2018) Y.J. Yin et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mechanism of huge Lüders-type deformation in ultrafine grained austenitic stainless steel

(2018) Si Gao et al.   SCRIPTA MATERIALIA

Annealing-induced abnormal hardening in a cold rolled CrMnFeCoNi high entropy alloy

(2018) Ji Gu et al.   SCRIPTA MATERIALIA

Composition-dependence of stacking fault energy in austenitic stainless steels through linear regression with random intercepts

(2017) G. Meric de Bellefon et al.   JOURNAL OF NUCLEAR MATERIALS

Hierarchical evolution and thermal stability of microstructure with deformation twins in 316 stainless steel

(2017) S.J. Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

High temperature thermal stability of nanocrystalline 316L stainless steel processed by high-pressure torsion

(2017) Moustafa El-Tahawy et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Achieving enhanced strength in ultrafine lamellar structured Al2024 alloy via mechanical milling and spark plasma sintering

(2017) Ruixiao Zheng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Additively manufactured hierarchical stainless steels with high strength and ductility

(2017) Y. Morris Wang et al.   NATURE MATERIALS

Grain boundary stability governs hardening and softening in extremely fine nanograined metals

(2017) J. Hu et al.   SCIENCE

Friction stress and Hall-Petch relationship in CoCrNi equi-atomic medium entropy alloy processed by severe plastic deformation and subsequent annealing

(2017) Shuhei Yoshida et al.   SCRIPTA MATERIALIA

Simultaneously enhanced strength and ductility of Mg-Zn-Zr-Ca alloy with fully recrystallized ultrafine grained structures

(2017) Ruixiao Zheng et al.   SCRIPTA MATERIALIA

Revealing the deformation mechanisms of Cu–Al alloys with high strength and good ductility

(2016) Y.Z. Tian et al.   ACTA MATERIALIA

Enhanced ductility in harmonic structure designed SUS316L produced by high energy ball milling and hot isostatic sintering

(2016) Ruixiao Zheng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure, phase composition and hardness evolution in 316L stainless steel processed by high-pressure torsion

(2016) Jenő Gubicza et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A review on high-pressure torsion (HPT) from 1935 to 1988

(2016) Kaveh Edalati et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The Strength–Grain Size Relationship in Ultrafine-Grained Metals

(2016) N. Balasubramanian et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Combination of dynamic transformation and dynamic recrystallization for realizing ultrafine-grained steels with superior mechanical properties

(2016) Lijia Zhao et al.   Scientific Reports

The influence of nanocrystalline structure and processing route on corrosion of stainless steel: A review

(2015) R.K. Gupta et al.   CORROSION SCIENCE

Increasing the strength of nanocrystalline steels by annealing: Is segregation necessary?

(2015) O. Renk et al.   SCRIPTA MATERIALIA

Grain boundary segregation induced strengthening of an ultrafine-grained austenitic stainless steel

(2014) M.M. Abramova et al.   MATERIALS LETTERS

An Ideal Ultrafine-Grained Structure for High Strength and High Ductility

(2014) C. X. Huang et al.   Materials Research Letters

Yielding Behavior and Its Effect on Uniform Elongation of Fine Grained IF Steel

(2013) Si Gao et al.   MATERIALS TRANSACTIONS

Fully recrystallized nanostructure fabricated without severe plastic deformation in high-Mn austenitic steel

(2013) Rajib Saha et al.   SCRIPTA MATERIALIA

Application of matrix decomposition algorithms for singular matrices to the Pawley method inZ-Rietveld

(2012) R. Oishi-Tomiyasu et al.   JOURNAL OF APPLIED CRYSTALLOGRAPHY

Strengthening austenitic steels by using nanotwinned austenitic grains

(2012) K. Lu et al.   SCRIPTA MATERIALIA

Observations of grain boundary impurities in nanocrystalline Al and their influence on microstructural stability and mechanical behaviour

(2011) F. Tang et al.   ACTA MATERIALIA

Strength and ductility of 316L austenitic stainless steel strengthened by nano-scale twin bundles

(2011) F.K. Yan et al.   ACTA MATERIALIA

Enhanced strength–ductility synergy in nanostructured Cu and Cu–Al alloys processed by high-pressure torsion and subsequent annealing

(2011) X.H. An et al.   SCRIPTA MATERIALIA

316L Austenite Stainless Steels Strengthened by Means of Nano-scale Twins

(2010) G.Z. Liu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Formation of ultrafine grained microstructure in the austenitic stainless steel and its impact on tensile properties

(2010) B. Ravi Kumar et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Nano-grain evolution in austenitic stainless steel during multi-directional forging

(2010) Y. Nakao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

On the origin of the extremely high strength of ultrafine-grained Al alloys produced by severe plastic deformation

(2010) R.Z. Valiev et al.   SCRIPTA MATERIALIA

Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed

(2009) Naoya Kamikawa et al.   ACTA MATERIALIA

Recent developments in stainless steels

(2009) K.H. Lo et al.   MATERIALS SCIENCE & ENGINEERING R-REPORTS

Managing Both Strength and Ductility in Ultrafine Grained Steels

(2008) Nobuhiro Tsuji et al.   ISIJ INTERNATIONAL

Combined effects of crystallographic orientation, stacking fault energy and grain size on deformation twinning in fcc crystals

(2008) W.Z. Han et al.   PHILOSOPHICAL MAGAZINE

Using high-pressure torsion for metal processing: Fundamentals and applications

(2008) A ZHILYAEV et al.   PROGRESS IN MATERIALS SCIENCE

Microstructural evolution and nanostructure formation in copper during dynamic plastic deformation at cryogenic temperatures

(2007) Y.S. Li et al.   ACTA MATERIALIA