Effect of Mn Addition on the Mechanical Properties of Al–12.6Si Alloy: Role of Al15(MnFe)3Si2 Intermetallic and Microstructure Modification

Effect of Mg2Si Concentration on the Dry Sliding Wear Behavior of Al-Mg2Si Composite

(2019) Prosanta Biswas et al.   JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME

Tailoring of Processing Parameters, Dendritic Microstructure, Si/Intermetallic Particles and Microhardness in As-cast and Heat-Treated Samples of Al7Si0.3Mg Alloy

(2019) Carolina R. Barbosa et al.   METALS AND MATERIALS INTERNATIONAL

Effect of Bi addition on microstructure and mechanical properties of hypereutectic Al-17.6Si alloy

(2019) Prosanta Biswas et al.   Materials Research Express

Micromechanical response of Al–Mg2Si composites using approximated representative volume elements (RVEs) model

(2019) Prosanta Biswas et al.   Materials Research Express

Effect of Ni and Mn Additions on the Ambient and High-Temperature Performance of Zr-Containing Al–Si–Cu–Mg-Based Alloys: Role of Precipitation Hardening

(2018) Loay Alyaldin et al.   International Journal of Metalcasting

Solidification behavior, microstructure and silicon twinning of Al-10Si alloys with ytterbium addition

(2018) Zhi Hu et al.   JOURNAL OF RARE EARTHS

High temperature tensile properties of hypereutectic Al-25Si based alloy

(2018) Kyu-Hyun Kim et al.   METALS AND MATERIALS INTERNATIONAL

Effects of Ti and La Additions on the Microstructures and Mechanical Properties of B-Refined and Sr-Modified Al–11Si Alloys

(2018) Chenlin Li et al.   METALS AND MATERIALS INTERNATIONAL

Effects of Heat Treatment on the Microstructures and High Temperature Mechanical Properties of Hypereutectic Al–14Si–Cu–Mg Alloy Manufactured by Liquid Phase Sintering Process

(2018) Joon-Young Heo et al.   METALS AND MATERIALS INTERNATIONAL

Finite element analysis of stress–strain localization and distribution in Al-4.5Cu-2Mg alloy

(2018) Rahul BHANDARI et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Investigation on the modification behavior of A356.2 alloy with Yb–La composite modifier

(2018) Shaochen Zhang et al.   Materials Research Express

Grain refining effects of the melt thermal-rate treatment and Al-Ti-B-Y refiner in as-cast Al-9Si-0.5Mg alloy

(2018) Peng Jia et al.   Materials Research Express

Unsteady-State Horizontal Solidification of an Al–Si–Cu–Fe Alloy: Relationship Between Thermal Parameters and Microstructure with Mechanical Properties/Fracture Feature

(2018) Fabricio A. Souza et al.   METALS AND MATERIALS INTERNATIONAL

Effect of Rare Earth Metals on Porosity Formation in A356 Alloy

(2017) M. G. Mahmoud et al.   International Journal of Metalcasting

Spheroidization of primary Mg 2 Si in Al-20Mg 2 Si-4.5Cu alloy modified with Ca and Sb during T6 heat treatment process

(2017) Hong-Chen Yu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of load on the tribological properties of hypereutectic Al–Si alloy under boundary lubrication conditions

(2017) Parveen Kumar et al.   Materials Research Express

FactSage thermochemical software and databases, 2010–2016

(2016) C.W. Bale et al.   CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY

Influence of Nanoparticles Introducing in the Melt of Aluminum Alloys on Castings Microstructure and Properties

(2016) R. Lazarova et al.   International Journal of Metalcasting

High temperature deformation behavior of spray-formed and subsequently extruded Al-25Si based alloy

(2016) Sin-Woo Lee et al.   METALS AND MATERIALS INTERNATIONAL

Microstructure and wear behavior of in-situ hypereutectic Al–high Si alloys produced by selective laser melting

(2016) Nan Kang et al.   MATERIALS & DESIGN

Effects of combinative addition of lanthanum and boron on grain refinement of Al–Si casting alloys

(2014) Yu Chen et al.   MATERIALS & DESIGN

Pitting corrosion of rheocast A356 aluminium alloy in 3.5wt.% NaCl solution

(2013) R. Arrabal et al.   CORROSION SCIENCE

Effect of rare earth cerium addition on the microstructure and tensile properties of hypereutectic Al–20%Si alloy

(2013) Qinglin Li et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of a high magnetic field on the morphological and crystallographic features of primary Al6Mn phase formed during solidification process

(2013) Lei Li et al.   JOURNAL OF MATERIALS RESEARCH

Effect of Mn addition on the microstructure and tensile properties of Al–15%Mg2Si composite

(2012) M.R. Ghorbani et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The effect of Al–5Ti–1B grain refiner on the structure and tensile properties of Al–20%Mg alloy

(2012) O. Fakhraei et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of silicon content in grain refining hypoeutectic Al–Si foundry alloys with boron and titanium additions

(2011) Y Birol   MATERIALS SCIENCE AND TECHNOLOGY

A first-principle calculation of structural, mechanical and electronic properties of titanium borides

(2011) Hai-yan YAN et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Effect of strontium on liquid structure of Al–Si hypoeutectic alloys using high-energy X-ray diffraction

(2010) P. Srirangam et al.   ACTA MATERIALIA

Improved mechanical properties in cast Al–Si alloys by combined alloying of Fe and Cu

(2010) E.R. Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Precipitation behavior of the ß phase in Al-5083

(2009) R. Goswami et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The effects of Mn additions on the microstructure and mechanical properties of Al–Si–Cu casting alloys

(2008) J.Y. Hwang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Strontium modification and formation of cubic primary Mg2Si crystals in Mg2Si/Al composite

(2006) Q.D. Qin et al.   JOURNAL OF ALLOYS AND COMPOUNDS