Electron and laser-based additive manufacturing of Ni-based superalloys: A review of heterogeneities in microstructure and mechanical properties
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Electron and laser-based additive manufacturing of Ni-based superalloys: A review of heterogeneities in microstructure and mechanical properties
Authors
Keywords
-
Journal
MATERIALS & DESIGN
Volume 223, Issue -, Pages 111245
Publisher
Elsevier BV
Online
2022-10-11
DOI
10.1016/j.matdes.2022.111245
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Evolution of microstructure and mechanical properties in 2205 duplex stainless steels during additive manufacturing and heat treatment
- (2022) Nima Haghdadi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On the Influence of Alloy Composition on the Additive Manufacturability of Ni-Based Superalloys
- (2022) Joseph N. Ghoussoub et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A critical review on the effects of process-induced porosity on the mechanical properties of alloys fabricated by laser powder bed fusion
- (2022) Wen Hao Kan et al. JOURNAL OF MATERIALS SCIENCE
- Applications of alloy design to cracking resistance of additively manufactured Ni-based alloys
- (2022) J. F. S. Markanday MATERIALS SCIENCE AND TECHNOLOGY
- Surface integrity of hybrid CM247LC/Inconel 718 components produced by laser-directed energy deposition
- (2022) Aldi Mehmeti et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Powder bed fusion additive manufacturing of Ni-based superalloys: a review of the main microstructural constituents and characterization techniques
- (2022) Michael P. Haines et al. JOURNAL OF MATERIALS SCIENCE
- Evidence of in-situ Cu clustering as a function of laser power during laser powder bed fusion of 17–4 PH stainless steel
- (2022) M.S. Moyle et al. SCRIPTA MATERIALIA
- Intergranular precipitation and chemical fluctuations in an additively manufactured 2205 duplex stainless steel
- (2022) Nima Haghdadi et al. SCRIPTA MATERIALIA
- Heterogeneous Aspects of Additive Manufactured Metallic Parts: A Review
- (2021) G. M. Karthik et al. METALS AND MATERIALS INTERNATIONAL
- Effect of solutionizing temperature on the microstructural evolution during double aging of powder bed fusion-additive manufactured IN718 alloy
- (2021) Ramakrishna M et al. MATERIALS CHARACTERIZATION
- Directed Energy Deposition (DED) Process: State of the Art
- (2021) Dong-Gyu Ahn International Journal of Precision Engineering and Manufacturing-Green Technology
- Digital materials design by thermal-fluid science for multi-metal additive manufacturing
- (2021) Junji Shinjo et al. ACTA MATERIALIA
- Understanding the Effects of CoAl2O4 Inoculant Additions on Microstructure in Additively Manufactured Inconel 718 Processed Via Selective Laser Melting
- (2021) Dhruv Tiparti et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Superior tensile properties of Hastelloy X enabled by additive manufacturing
- (2021) Reza Ghiaasiaan et al. Materials Research Letters
- Multi-laser scan strategies for enhancing creep performance in LPBF
- (2021) Salomé Sanchez et al. Additive Manufacturing
- Laves phase tuning for enhancing high temperature mechanical property improvement in laser directed energy deposited Inconel 718
- (2021) Shang Sui et al. COMPOSITES PART B-ENGINEERING
- Powder Bed Fusion of nickel-based superalloys: A review
- (2021) Salomé Sanchez et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- 3D characterization of microstructural evolution and variant selection in additively manufactured Ti-6Al-4 V
- (2021) Ryan DeMott et al. JOURNAL OF MATERIALS SCIENCE
- Laser dissimilar welding of CoCrFeMnNi-high entropy alloy and duplex stainless steel
- (2021) Nana Kwabena Adomako et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Direct energy deposition of high strength austenitic stainless steel matrix nanocomposite with superior ductility: Microstructure, tensile properties, and deformation behavior
- (2021) Young-Kyun Kim et al. MATERIALS CHARACTERIZATION
- Correlative analysis of grain boundary precipitates in Ni-based superalloy René 41
- (2021) R. Buerstmayr et al. MATERIALS CHARACTERIZATION
- Multiscale microstructural heterogeneity and mechanical property scatter in Inconel 718 produced by directed energy deposition
- (2021) Yong Chen Yeoh et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The limit of hot isostatic pressing for healing cracks present in an additively manufactured nickel superalloy
- (2021) M. Vilanova et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Multi-scale characterisation of microstructure and texture of 316L stainless steel manufactured by laser powder bed fusion
- (2021) Maxwell Moyle et al. MATERIALS CHARACTERIZATION
- Increased tensile strength and elongation of the Ni–Fe based polycrystalline cast superalloy via the trace addition of TiC nanoparticles
- (2021) Xiao Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A Novel Classification Method for Pores in Laser Powder Bed Fusion
- (2021) Natan Nudelis et al. Metals
- Effects of processing heterogeneities on the micro- to nanostructure strengthening mechanisms of an alloy 718 turbine disk
- (2021) Vitor Vieira Rielli et al. MATERIALS & DESIGN
- Advances in additive manufacturing of metal-based functionally graded materials
- (2020) Ashley Reichardt et al. INTERNATIONAL MATERIALS REVIEWS
- Microstructure-property relationships in directly aged Alloy 718 turbine disks
- (2020) F. Theska et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of high chromium nickel-based superalloy fabricated by laser metal deposition
- (2020) Kaiming Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure Evolution of Selective Laser Melted Inconel 718: Influence of High Heating Rates
- (2020) Seyedmohammad Tabaie et al. Metals
- Effect of Post Processing Heat Treatment Routes on Microstructure and Mechanical Property Evolution of Haynes 282 Ni-Based Superalloy Fabricated with Selective Laser Melting (SLM)
- (2020) Anagh Deshpande et al. Metals
- The origin of high-density dislocations in additively manufactured metals
- (2020) Ge Wang et al. Materials Research Letters
- Multimodal γ′ precipitation in Inconel-738 Ni-based superalloy during electron-beam powder bed fusion additive manufacturing
- (2020) Nima Haghdadi et al. JOURNAL OF MATERIALS SCIENCE
- Influence of interlayer dwell time on the microstructure of Inconel 718 Laser Cladded components
- (2020) Camille Guévenoux et al. OPTICS AND LASER TECHNOLOGY
- Review of Laser Powder Bed Fusion of Gamma-Prime-Strengthened Nickel-Based Superalloys
- (2020) Olutayo Adegoke et al. Metals
- Processing parameters in laser powder bed fusion metal additive manufacturing
- (2020) J.P. Oliveira et al. MATERIALS & DESIGN
- Alloys-By-Design: Application to New Superalloys for Additive Manufacturing
- (2020) Yuanbo T. Tang et al. ACTA MATERIALIA
- Additive manufacturing of steels: a review of achievements and challenges
- (2020) Nima Haghdadi et al. Journal of Materials Science
- Mechanical properties and microstructure evolution of selective laser melting Inconel 718 along building direction and sectional dimension
- (2020) Baicheng Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The residual stress in as-built Laser Powder Bed Fusion IN718 alloy as a consequence of the scanning strategy induced microstructure
- (2020) Itziar Serrano-Munoz et al. Scientific Reports
- A study on the additive manufacturing of a high chromium Nickel-based superalloy by extreme high-speed laser metal deposition
- (2020) Kaiming Wang et al. OPTICS AND LASER TECHNOLOGY
- Review of γ’ Rafting Behavior in Nickel-Based Superalloys: Crystal Plasticity and Phase-Field Simulation
- (2020) Zhiyuan Yu et al. Crystals
- Preferential interdendritic oxidation of laser additively manufactured Inconel 718
- (2020) Guoyun Luo et al. CORROSION SCIENCE
- Hybrid additive manufacturing of Inconel 718 for future space applications
- (2020) M. Godec et al. MATERIALS CHARACTERIZATION
- Nanometer-scale precipitations in a selective electron beam melted nickel-based superalloy
- (2020) Shubham Chandra et al. SCRIPTA MATERIALIA
- Effect of ultrasonic micro-forging treatment on microstructure and mechanical properties of GH3039 superalloy processed by directed energy deposition
- (2020) Qingqing Li et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Additive manufacturing of high entropy alloys: A practical review
- (2020) Ahmad Ostovari Moghaddam et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Microstructure and mechanical properties of Hastelloy X produced by HP-SLM (high power selective laser melting)
- (2019) Maria L. Montero-Sistiaga et al. MATERIALS & DESIGN
- Mechanical Properties of Tool Steels with High Wear Resistance via Directed Energy Deposition
- (2019) Gyeong Yun Baek et al. Metals
- Microstructural Evolution of Post-Processed Hastelloy X Alloy Fabricated by Laser Powder Bed Fusion
- (2019) Giulio Marchese et al. Materials
- Predicting the Microstructural Evolution of Electron Beam Melting of Alloy 718 with Phase-Field Modeling
- (2019) Chamara Kumara et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- On the solidification behaviour and cracking origin of a nickel-based superalloy during selective laser melting
- (2019) Chunlei Qiu et al. MATERIALS CHARACTERIZATION
- Understanding processing parameters affecting residual stress in selective laser melting of Inconel 718 through numerical modeling
- (2019) Jia Song et al. JOURNAL OF MATERIALS RESEARCH
- High-throughput fabrication of nickel-based alloys with different Nb contents via a dual-feed additive manufacturing system: Effect of Nb content on microstructural and mechanical properties
- (2019) Decheng Kong et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Multiscale characterization of microstructures and mechanical properties of Inconel 718 fabricated by selective laser melting
- (2019) Sharniece Holland et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of heat treatment on mechanical property and microstructure of a powder metallurgy nickel-based superalloy
- (2019) Hongyu Wu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Study on the element segregation and Laves phase formation in the laser metal deposited IN718 superalloy by flat top laser and gaussian distribution laser
- (2019) Yuan Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Laser-assisted directed energy deposition of nickel super alloys: A review
- (2019) AN Jinoop et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
- The Influence of Process Parameters and Build Orientation on the Creep Behaviour of a Laser Powder Bed Fused Ni-based Superalloy for Aerospace Applications
- (2019) Hani Hilal et al. Materials
- Probabilistic neural network identification of an alloy for direct laser deposition
- (2019) B.D. Conduit et al. MATERIALS & DESIGN
- Microstructure formed during selective laser melting of IN738LC in keyhole mode
- (2019) T. Guraya et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Mechanisms driving high-cycle fatigue life of as-built Inconel 718 processed by laser powder bed fusion
- (2019) Dillon S. Watring et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On the Evolution of Primary Gamma Prime Precipitates During High Temperature and High Strain Rate Deformation and Subsequent Heat Treatment in the Ni-Based Superalloy, RR1000
- (2019) N. D’Souza et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of heat treatment on the high temperature fatigue life of single crystalline nickel base superalloy additively manufactured by means of selective electron beam melting
- (2019) Carla Meid et al. SCRIPTA MATERIALIA
- Cracking during thermal post-processing of laser powder bed fabricated CM247LC Ni-superalloy
- (2019) John H. Boswell et al. MATERIALS & DESIGN
- Effect of preheating on the thermal, microstructural and mechanical properties of selective electron beam melted Ti-6Al-4V components
- (2019) Chu Lun Alex Leung et al. MATERIALS & DESIGN
- Atomic-scale grain boundary engineering to overcome hot-cracking in additively-manufactured superalloys
- (2019) Paraskevas Kontis et al. ACTA MATERIALIA
- Creep properties of single crystal Ni-base superalloys (SX): A comparison between conventionally cast and additive manufactured CMSX-4 materials
- (2019) D. Bürger et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural evolution and mechanical properties of Inconel 718 superalloy thin wall fabricated by pulsed plasma arc additive manufacturing
- (2019) Kaibo Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Evaluation of additive electron beam melting of haynes 282 alloy
- (2019) K.A. Unocic et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Analysis of formation and growth of the σ phase in additively manufactured functionally graded materials
- (2019) Lourdes D. Bobbio et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Graphene reinforced nickel-based superalloy composites fabricated by additive manufacturing
- (2019) Zhen Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of rene 41 alloy manufactured by laser powder bed fusion
- (2019) Sıla Ece Atabay et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The effects of stress relieving heat treatment on the microstructure and residual stress of Inconel 718 fabricated by laser metal powder bed fusion additive manufacturing process
- (2019) Xiaoqing Wang et al. Journal of Manufacturing Processes
- Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron Beam Melting
- (2018) Edouard Chauvet et al. ACTA MATERIALIA
- Notched fatigue testing of Inconel 718 prepared by selective laser melting
- (2018) D.B. Witkin et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Long fatigue crack propagation behavior of Inconel 625 processed by laser powder bed fusion: Influence of build orientation and post-processing conditions
- (2018) J.-R. Poulin et al. INTERNATIONAL JOURNAL OF FATIGUE
- Microstructure evolution, mechanical response and underlying thermodynamic mechanism of multi-phase strengthening WC/Inconel 718 composites using selective laser melting
- (2018) Mujian Xia et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Mitigation of hot cracking in Inconel 718 superalloy by ultrasonic vibration during gas tungsten arc welding
- (2018) R. Thavamani et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructural characterization of laser metal powder deposited Alloy 718
- (2018) Andreas Segerstark et al. MATERIALS CHARACTERIZATION
- Comparison of microstructures and mechanical properties of Inconel 718 alloy processed by selective laser melting and casting
- (2018) Dongyun Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of heat treatments on microstructure evolution and mechanical properties of Inconel 625 processed by laser powder bed fusion
- (2018) Giulio Marchese et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: Sample orientation dependence and effects of post heat treatments
- (2018) Dunyong Deng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Modelling of anisotropic elastic properties in alloy 718 built by electron beam melting
- (2018) Chamara Kumara et al. MATERIALS SCIENCE AND TECHNOLOGY
- Electron beam melting of Inconel 718: effects of processing and post-processing
- (2018) Peeyush Nandwana et al. MATERIALS SCIENCE AND TECHNOLOGY
- The Influence of Annealing Temperature and Time on the Formation of δ-Phase in Additively-Manufactured Inconel 625
- (2018) M. R. Stoudt et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- The Influence of the Support Structure on Residual Stress and Distortion in SLM Inconel 718 Parts
- (2018) Tatiana Mishurova et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Additive Manufacturing of Nickel Superalloys: Opportunities for Innovation and Challenges Related to Qualification
- (2018) S. S. Babu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure and Mechanical Properties of CMSX-4 Single Crystals Prepared by Additive Manufacturing
- (2018) C. Körner et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Characterization of Ni-Based Superalloy Built by Selective Laser Melting and Electron Beam Melting
- (2018) Yen-Ling Kuo et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Asymmetric Cracking in Mar-M247 Alloy Builds During Electron Beam Powder Bed Fusion Additive Manufacturing
- (2018) Y. S. Lee et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Correlation of Microstructure to Creep Response of Hot Isostatically Pressed and Aged Electron Beam Melted Inconel 718
- (2018) Benjamin Shassere et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Review on thermal analysis in laser-based additive manufacturing
- (2018) Zhaorui Yan et al. OPTICS AND LASER TECHNOLOGY
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- Producing Ni-base superalloys single crystal by selective electron beam melting
- (2018) Edouard Chauvet et al. SCRIPTA MATERIALIA
- The Effect of Post-Processes on the Microstructure and Creep Properties of Alloy718 Built Up by Selective Laser Melting
- (2018) Yen-Ling Kuo et al. Materials
- Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
- (2018) Y. Kok et al. MATERIALS & DESIGN
- The printability, microstructure, crystallographic features and microhardness of selective laser melted Inconel 718 thin wall
- (2018) Huihui Yang et al. MATERIALS & DESIGN
- Influence of build layout and orientation on microstructural characteristics of electron beam melted Alloy 718
- (2018) P. Karimi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of Selective Laser Melting additive manufacturing parameters of Inconel 718 on porosity, microstructure and mechanical properties
- (2018) K. Moussaoui et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Process-Defect-Structure-Property Correlations During Laser Powder Bed Fusion of Alloy 718: Role of In Situ and Ex Situ Characterizations
- (2018) S. J. Foster et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Geometry-Induced Spatial Variation of Microstructure Evolution During Selective Electron Beam Melting of Rene-N5
- (2018) Curtis Lee Frederick et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Anisotropy of nickel-based superalloy K418 fabricated by selective laser melting
- (2018) Zhen Chen et al. Progress in Natural Science-Materials International
- On the formation of microstructural gradients in a nickel-base superalloy during electron beam melting
- (2018) Dunyong Deng et al. MATERIALS & DESIGN
- Influence of successive thermal cycling on microstructure evolution of EBM-manufactured alloy 718 in track-by-track and layer-by-layer design
- (2018) Paria Karimi et al. MATERIALS & DESIGN
- Additive manufacturing of functionally graded transition joints between ferritic and austenitic alloys
- (2018) J.S. Zuback et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Causes analysis on cracks in nickel-based single crystal superalloy fabricated by laser powder deposition additive manufacturing
- (2018) Zhipeng Zhou et al. MATERIALS & DESIGN
- Effect of anisotropy and texture on the low cycle fatigue behavior of Inconel 718 processed via electron beam melting
- (2017) M.M. Kirka et al. INTERNATIONAL JOURNAL OF FATIGUE
- Induced porosity in Super Alloy 718 through the laser additive manufacturing process: Microstructure and mechanical properties
- (2017) Mario Valdez et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Dimensionless numbers in additive manufacturing
- (2017) T. Mukherjee et al. JOURNAL OF APPLIED PHYSICS
- On the Effects of the Rejuvenation Treatment on Mechanical and Microstructural Properties of IN-738 Superalloy
- (2017) Cosimo Monti et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Numerical simulation of multi-component evaporation during selective electron beam melting of TiAl
- (2017) Alexander Klassen et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effects of laser modes on Nb segregation and Laves phase formation during laser additive manufacturing of nickel-based superalloy
- (2017) H. Xiao et al. MATERIALS LETTERS
- Fatigue crack growth rate and tensile strength of Re modified Inconel 718 produced by means of selective laser melting
- (2017) Tomasz Brynk et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The tensile deformation behavior of laser repaired Inconel 718 with a non-uniform microstructure
- (2017) Shang Sui et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing
- (2017) Mang Ni et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and anisotropic mechanical properties of EBM manufactured Inconel 718 and effects of post heat treatments
- (2017) Dunyong Deng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment
- (2017) Wakshum M. Tucho et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Elevated temperature mechanical behavior of IN625 alloy processed by laser powder-bed fusion
- (2017) Alena Kreitcberg et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanical behavior of post-processed Inconel 718 manufactured through the electron beam melting process
- (2017) Michael M. Kirka et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of heat treatment and hot isostatic pressing on the microstructure and mechanical properties of Inconel 625 alloy processed by laser powder bed fusion
- (2017) Alena Kreitcberg et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Formation of the Ni3Nb δ-Phase in Stress-Relieved Inconel 625 Produced via Laser Powder-Bed Fusion Additive Manufacturing
- (2017) Eric A. Lass et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Investigation on the optimized heat treatment procedure for laser fabricated IN718 alloy
- (2017) Yaocheng Zhang et al. OPTICS AND LASER TECHNOLOGY
- Densification and microstructural investigation of Inconel 718 parts fabricated by selective laser melting
- (2017) Joon-Phil Choi et al. POWDER TECHNOLOGY
- Homogenization kinetics of a nickel-based superalloy produced by powder bed fusion laser sintering
- (2017) Fan Zhang et al. SCRIPTA MATERIALIA
- Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing
- (2017) Yen-Ling Kuo et al. SCRIPTA MATERIALIA
- Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments
- (2017) Ahmad Mostafa et al. Metals
- Neutron residual stress measurement and numerical modeling in a curved thin-walled structure by laser powder bed fusion additive manufacturing
- (2017) Ke An et al. MATERIALS & DESIGN
- Effect of hatch length on the development of microstructure, texture and residual stresses in selective laser melted superalloy Inconel 718
- (2017) Naresh Nadammal et al. MATERIALS & DESIGN
- Variation of hardness, microstructure, and Laves phase distribution in direct laser deposited alloy 718 cuboids
- (2017) Erica L. Stevens et al. MATERIALS & DESIGN
- Functionally graded Inconel 718 processed by additive manufacturing: Crystallographic texture, anisotropy of microstructure and mechanical properties
- (2017) V.A. Popovich et al. MATERIALS & DESIGN
- Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting
- (2017) V.A. Popovich et al. MATERIALS & DESIGN
- Selective laser melting of Invar 36: Microstructure and properties
- (2016) Chunlei Qiu et al. ACTA MATERIALIA
- Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing
- (2016) Narendran Raghavan et al. ACTA MATERIALIA
- Characterization and Comparison of Inconel 625 Processed by Selective Laser Melting and Laser Metal Deposition
- (2016) Giulio Marchese et al. ADVANCED ENGINEERING MATERIALS
- Influences of deposition current and interpass temperature to the Fe3Al-based iron aluminide fabricated using wire-arc additive manufacturing process
- (2016) Chen Shen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A study on the residual stress during selective laser melting (SLM) of metallic powder
- (2016) Yang Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Low cycle fatigue behavior of direct metal laser sintered Inconel alloy 718
- (2016) Sean Gribbin et al. INTERNATIONAL JOURNAL OF FATIGUE
- The metallurgy and processing science of metal additive manufacturing
- (2016) W. J. Sames et al. INTERNATIONAL MATERIALS REVIEWS
- Microstructure, Fatigue Behavior, and Failure Mechanisms of Direct Laser-Deposited Inconel 718
- (2016) Alex S. Johnson et al. JOM
- Microstructure Development in Electron Beam-Melted Inconel 718 and Associated Tensile Properties
- (2016) M. M. Kirka et al. JOM
- Prediction of primary dendritic arm spacing during laser rapid directional solidification of single-crystal nickel-base superalloys
- (2016) Yao-Jian Liang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Formation of novel graded interface and its function on mechanical properties of WC 1−x reinforced Inconel 718 composites processed by selective laser melting
- (2016) Ting Rong et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Dendritic microstructure and hot cracking of laser additive manufactured Inconel 718 under improved base cooling
- (2016) Yuan Chen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Morphology evolution of γ′ phase in K465 nickel-base superalloy during laser forming repairing
- (2016) Qiuge Li et al. JOURNAL OF LASER APPLICATIONS
- Selective Laser Melting of Graphene-Reinforced Inconel 718 Superalloy: Evaluation of Microstructure and Tensile Performance
- (2016) Yachao Wang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Effect of different heat treatments on the microstructure and mechanical properties in selective laser melted INCONEL 718 alloy
- (2016) S. Raghavan et al. MATERIALS AND MANUFACTURING PROCESSES
- Anisotropy in creep properties of DS200 + Hf alloy
- (2016) L. Mataveli Suave et al. MATERIALS AT HIGH TEMPERATURES
- Microstructure and mechanical behavior of direct metal laser sintered Inconel alloy 718
- (2016) Derek H. Smith et al. MATERIALS CHARACTERIZATION
- Superior creep strength of a nickel-based superalloy produced by selective laser melting
- (2016) M. Pröbstle et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Erratum to: ‘Grain structure evolution in Inconel 718 during selective electron beam melting’ [Mater. Sci. Eng. A 668 (2016) 180–187]
- (2016) H. Helmer et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On the microstructural and mechanical properties of post-treated additively manufactured Inconel 718 superalloy under quasi-static and cyclic loading
- (2016) M.E. Aydinöz et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural characteristics of the nickel-based alloy IN738LC and the cobalt-based alloy Mar-M509 produced by selective laser melting
- (2016) Michael Cloots et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of post heat treatments on anisotropy of mechanical behaviour and microstructure of Hastelloy-X parts produced by selective laser melting
- (2016) Dacian Tomus et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure of the Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting
- (2016) Markus Ramsperger et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Additive manufacturing of Ni-based superalloys: The outstanding issues
- (2016) Moataz M. Attallah et al. MRS BULLETIN
- Review on powder-bed laser additive manufacturing of Inconel 718 parts
- (2016) Xiaoqing Wang et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Fabrication of NiTi through additive manufacturing: A review
- (2016) Mohammad Elahinia et al. PROGRESS IN MATERIALS SCIENCE
- Evaluation of a temperature measurement method developed for laser metal deposition
- (2016) Andreas Segerstark et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effects of tailored gradient interface on wear properties of WC/Inconel 718 composites using selective laser melting
- (2016) Ting Rong et al. SURFACE & COATINGS TECHNOLOGY
- Microstructural characteristics and mechanical properties of carbon nanotube reinforced Inconel 625 parts fabricated by selective laser melting
- (2016) Pei Wang et al. MATERIALS & DESIGN
- Printability of alloys for additive manufacturing
- (2016) T. Mukherjee et al. Scientific Reports
- Phase and grain size inhomogeneity and their influences on creep behavior of Co–Cr–Mo alloy additive manufactured by electron beam melting
- (2015) Shi-Hai Sun et al. ACTA MATERIALIA
- Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition
- (2015) W. Xu et al. ACTA MATERIALIA
- Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach
- (2015) Neil J. Harrison et al. ACTA MATERIALIA
- Mechanical and Microstructural Investigation of Nickel-Based Superalloy IN718 Manufactured by Selective Laser Melting (SLM)
- (2015) Johannes Strößner et al. ADVANCED ENGINEERING MATERIALS
- Transient thermal modeling of laser-based additive manufacturing for 3D freeform structures
- (2015) Erdem Kundakcioglu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys
- (2015) Erik R. Denlinger et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure Characteristics of Inconel 625 Superalloy Manufactured by Selective Laser Melting
- (2015) Shuai Li et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy
- (2015) Dongyun Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Laser additive manufacturing of ultrafine TiC particle reinforced Inconel 625 based composite parts: Tailored microstructures and enhanced performance
- (2015) Chen Hong et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting
- (2015) E. Chlebus et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM)
- (2015) Karsten Kunze et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Characterization of Plastic Flow Pertinent to the Evolution of Bulk Residual Stress in Powder-Metallurgy, Nickel-Base Superalloys
- (2015) S. L. Semiatin et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy
- (2015) Yanjin Lu et al. OPTICS AND LASER TECHNOLOGY
- In situ heat treatment in selective laser melted martensitic AISI 420 stainless steels
- (2015) P. Krakhmalev et al. MATERIALS & DESIGN
- Progress of phase-field investigations of γ′ rafting in nickel-base single-crystal superalloys
- (2014) Yan Zhao et al. CHINESE SCIENCE BULLETIN
- The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy
- (2014) Luke N. Carter et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Correlation Between Microstructure and Mechanical Properties in an Inconel 718 Deposit Produced via Electron Beam Freeform Fabrication
- (2014) Wesley A. Tayon et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Thermal effects on microstructural heterogeneity of Inconel 718 materials fabricated by electron beam melting
- (2014) William J. Sames et al. JOURNAL OF MATERIALS RESEARCH
- Microstructural and texture development in direct laser fabricated IN718
- (2014) Lakshmi L. Parimi et al. MATERIALS CHARACTERIZATION
- Microstructural Evolutions During Thermal Aging of Alloy 625: Impact of Temperature and Forming Process
- (2014) Lorena Mataveli Suave et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- The Effect of Forging Variables on the Supersolvus Heat-Treatment Response of Powder-Metallurgy Nickel-Base Superalloys
- (2014) S. L. Semiatin et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Rationalization of Microstructure Heterogeneity in INCONEL 718 Builds Made by the Direct Laser Additive Manufacturing Process
- (2014) Yuan Tian et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Selective laser melting additive manufactured Inconel 718 superalloy parts: High-temperature oxidation property and its mechanisms
- (2014) Qingbo Jia et al. OPTICS AND LASER TECHNOLOGY
- Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control
- (2014) John A. Slotwinski et al. JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
- Build direction dependence of microstructure and high-temperature tensile property of Co–Cr–Mo alloy fabricated by electron beam melting
- (2013) Shi-Hai Sun et al. ACTA MATERIALIA
- Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties
- (2013) Qingbo Jia et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effects of Interpass Idle Time on Thermal Stresses in Multipass Multilayer Weld-Based Rapid Prototyping
- (2013) Huihui Zhao et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Microstructural Evolution and Mechanical Properties of Inconel 625 Alloy during Pulsed Plasma Arc Deposition Process
- (2013) Fujia Xu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- High temperature material properties of IN738LC processed by selective laser melting (SLM) technology
- (2013) L. Rickenbacher et al. RAPID PROTOTYPING JOURNAL
- Grain-boundary precipitation in Allvac 718Plus
- (2012) E.J. Pickering et al. ACTA MATERIALIA
- Strain Effect on the γ′ Dissolution at High Temperatures of a Nickel-Based Single Crystal Superalloy
- (2012) Rémi Giraud et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructural changes in a laser solid forming Inconel 718 superalloy thin wall in the deposition direction
- (2012) Fencheng Liu et al. OPTICS AND LASER TECHNOLOGY
- Effect of overlap rate on recrystallization behaviors of Laser Solid Formed Inconel 718 superalloy
- (2012) Jun Cao et al. OPTICS AND LASER TECHNOLOGY
- Solidification microstructure of directionally solidified superalloy under high temperature gradient
- (2012) Weiguo Zhang et al. RARE METALS
- Mechanical property study on rapid additive layer manufacture Hastelloy® X alloy by selective laser melting technology
- (2011) Fude Wang INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The microstructure and mechanical properties of deposited-IN718 by selective laser melting
- (2011) Zemin Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Thermomechanical analysis of multi-bead pulsed laser powder deposition of a nickel-based superalloy
- (2011) Chunbo (Sam) Zhang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy
- (2011) T. Vilaro et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural Architecture, Microstructures, and Mechanical Properties for a Nickel-Base Superalloy Fabricated by Electron Beam Melting
- (2011) L. E. Murr et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Finite element modeling of multi-pass welding and shaped metal deposition processes
- (2010) Michele Chiumenti et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- The effect of laser scanning path on microstructures and mechanical properties of laser solid formed nickel-base superalloy Inconel 718
- (2010) Fencheng Liu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Improvement of mechanical properties of ferritic stainless steel weld metal by ultrasonic vibration
- (2010) Takehiko Watanabe et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Residual stresses in laser direct metal deposited Waspaloy
- (2010) R.J. Moat et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The Origin of Microstructural Diversity, Texture, and Mechanical Properties in Electron Beam Melted Ti-6Al-4V
- (2010) S. S. Al-Bermani et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy
- (2010) Fencheng Liu et al. OPTICS AND LASER TECHNOLOGY
- Microstructure and mechanical properties of nickel based superalloy IN718 produced by rapid prototyping with electron beam melting (EBM)
- (2009) A Strondl et al. MATERIALS SCIENCE AND TECHNOLOGY
- Studies of Standard Heat Treatment Effects on Microstructure and Mechanical Properties of Laser Net Shape Manufactured INCONEL 718
- (2009) H. Qi et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Study on microstructure and mechanical properties of laser rapid forming Inconel 718
- (2007) Xiaoming Zhao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started