Electron and laser-based additive manufacturing of Ni-based superalloys: A review of heterogeneities in microstructure and mechanical properties
出版年份 2022 全文链接
标题
Electron and laser-based additive manufacturing of Ni-based superalloys: A review of heterogeneities in microstructure and mechanical properties
作者
关键词
-
出版物
MATERIALS & DESIGN
Volume 223, Issue -, Pages 111245
出版商
Elsevier BV
发表日期
2022-10-11
DOI
10.1016/j.matdes.2022.111245
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Evolution of microstructure and mechanical properties in 2205 duplex stainless steels during additive manufacturing and heat treatment
- (2022) Nima Haghdadi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On the Influence of Alloy Composition on the Additive Manufacturability of Ni-Based Superalloys
- (2022) Joseph N. Ghoussoub et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A critical review on the effects of process-induced porosity on the mechanical properties of alloys fabricated by laser powder bed fusion
- (2022) Wen Hao Kan et al. JOURNAL OF MATERIALS SCIENCE
- Applications of alloy design to cracking resistance of additively manufactured Ni-based alloys
- (2022) J. F. S. Markanday MATERIALS SCIENCE AND TECHNOLOGY
- Surface integrity of hybrid CM247LC/Inconel 718 components produced by laser-directed energy deposition
- (2022) Aldi Mehmeti et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Powder bed fusion additive manufacturing of Ni-based superalloys: a review of the main microstructural constituents and characterization techniques
- (2022) Michael P. Haines et al. JOURNAL OF MATERIALS SCIENCE
- Evidence of in-situ Cu clustering as a function of laser power during laser powder bed fusion of 17–4 PH stainless steel
- (2022) M.S. Moyle et al. SCRIPTA MATERIALIA
- Intergranular precipitation and chemical fluctuations in an additively manufactured 2205 duplex stainless steel
- (2022) Nima Haghdadi et al. SCRIPTA MATERIALIA
- Heterogeneous Aspects of Additive Manufactured Metallic Parts: A Review
- (2021) G. M. Karthik et al. METALS AND MATERIALS INTERNATIONAL
- Effect of solutionizing temperature on the microstructural evolution during double aging of powder bed fusion-additive manufactured IN718 alloy
- (2021) Ramakrishna M et al. MATERIALS CHARACTERIZATION
- Directed Energy Deposition (DED) Process: State of the Art
- (2021) Dong-Gyu Ahn International Journal of Precision Engineering and Manufacturing-Green Technology
- Digital materials design by thermal-fluid science for multi-metal additive manufacturing
- (2021) Junji Shinjo et al. ACTA MATERIALIA
- Understanding the Effects of CoAl2O4 Inoculant Additions on Microstructure in Additively Manufactured Inconel 718 Processed Via Selective Laser Melting
- (2021) Dhruv Tiparti et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Superior tensile properties of Hastelloy X enabled by additive manufacturing
- (2021) Reza Ghiaasiaan et al. Materials Research Letters
- Multi-laser scan strategies for enhancing creep performance in LPBF
- (2021) Salomé Sanchez et al. Additive Manufacturing
- Laves phase tuning for enhancing high temperature mechanical property improvement in laser directed energy deposited Inconel 718
- (2021) Shang Sui et al. COMPOSITES PART B-ENGINEERING
- Powder Bed Fusion of nickel-based superalloys: A review
- (2021) Salomé Sanchez et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- 3D characterization of microstructural evolution and variant selection in additively manufactured Ti-6Al-4 V
- (2021) Ryan DeMott et al. JOURNAL OF MATERIALS SCIENCE
- Laser dissimilar welding of CoCrFeMnNi-high entropy alloy and duplex stainless steel
- (2021) Nana Kwabena Adomako et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Direct energy deposition of high strength austenitic stainless steel matrix nanocomposite with superior ductility: Microstructure, tensile properties, and deformation behavior
- (2021) Young-Kyun Kim et al. MATERIALS CHARACTERIZATION
- Correlative analysis of grain boundary precipitates in Ni-based superalloy René 41
- (2021) R. Buerstmayr et al. MATERIALS CHARACTERIZATION
- Multiscale microstructural heterogeneity and mechanical property scatter in Inconel 718 produced by directed energy deposition
- (2021) Yong Chen Yeoh et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The limit of hot isostatic pressing for healing cracks present in an additively manufactured nickel superalloy
- (2021) M. Vilanova et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Multi-scale characterisation of microstructure and texture of 316L stainless steel manufactured by laser powder bed fusion
- (2021) Maxwell Moyle et al. MATERIALS CHARACTERIZATION
- Increased tensile strength and elongation of the Ni–Fe based polycrystalline cast superalloy via the trace addition of TiC nanoparticles
- (2021) Xiao Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A Novel Classification Method for Pores in Laser Powder Bed Fusion
- (2021) Natan Nudelis et al. Metals
- Effects of processing heterogeneities on the micro- to nanostructure strengthening mechanisms of an alloy 718 turbine disk
- (2021) Vitor Vieira Rielli et al. MATERIALS & DESIGN
- Advances in additive manufacturing of metal-based functionally graded materials
- (2020) Ashley Reichardt et al. INTERNATIONAL MATERIALS REVIEWS
- Microstructure-property relationships in directly aged Alloy 718 turbine disks
- (2020) F. Theska et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of high chromium nickel-based superalloy fabricated by laser metal deposition
- (2020) Kaiming Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure Evolution of Selective Laser Melted Inconel 718: Influence of High Heating Rates
- (2020) Seyedmohammad Tabaie et al. Metals
- Effect of Post Processing Heat Treatment Routes on Microstructure and Mechanical Property Evolution of Haynes 282 Ni-Based Superalloy Fabricated with Selective Laser Melting (SLM)
- (2020) Anagh Deshpande et al. Metals
- The origin of high-density dislocations in additively manufactured metals
- (2020) Ge Wang et al. Materials Research Letters
- Multimodal γ′ precipitation in Inconel-738 Ni-based superalloy during electron-beam powder bed fusion additive manufacturing
- (2020) Nima Haghdadi et al. JOURNAL OF MATERIALS SCIENCE
- Influence of interlayer dwell time on the microstructure of Inconel 718 Laser Cladded components
- (2020) Camille Guévenoux et al. OPTICS AND LASER TECHNOLOGY
- Review of Laser Powder Bed Fusion of Gamma-Prime-Strengthened Nickel-Based Superalloys
- (2020) Olutayo Adegoke et al. Metals
- Processing parameters in laser powder bed fusion metal additive manufacturing
- (2020) J.P. Oliveira et al. MATERIALS & DESIGN
- Alloys-By-Design: Application to New Superalloys for Additive Manufacturing
- (2020) Yuanbo T. Tang et al. ACTA MATERIALIA
- Additive manufacturing of steels: a review of achievements and challenges
- (2020) Nima Haghdadi et al. Journal of Materials Science
- Mechanical properties and microstructure evolution of selective laser melting Inconel 718 along building direction and sectional dimension
- (2020) Baicheng Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The residual stress in as-built Laser Powder Bed Fusion IN718 alloy as a consequence of the scanning strategy induced microstructure
- (2020) Itziar Serrano-Munoz et al. Scientific Reports
- A study on the additive manufacturing of a high chromium Nickel-based superalloy by extreme high-speed laser metal deposition
- (2020) Kaiming Wang et al. OPTICS AND LASER TECHNOLOGY
- Review of γ’ Rafting Behavior in Nickel-Based Superalloys: Crystal Plasticity and Phase-Field Simulation
- (2020) Zhiyuan Yu et al. Crystals
- Preferential interdendritic oxidation of laser additively manufactured Inconel 718
- (2020) Guoyun Luo et al. CORROSION SCIENCE
- Hybrid additive manufacturing of Inconel 718 for future space applications
- (2020) M. Godec et al. MATERIALS CHARACTERIZATION
- Nanometer-scale precipitations in a selective electron beam melted nickel-based superalloy
- (2020) Shubham Chandra et al. SCRIPTA MATERIALIA
- Effect of ultrasonic micro-forging treatment on microstructure and mechanical properties of GH3039 superalloy processed by directed energy deposition
- (2020) Qingqing Li et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Additive manufacturing of high entropy alloys: A practical review
- (2020) Ahmad Ostovari Moghaddam et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Microstructure and mechanical properties of Hastelloy X produced by HP-SLM (high power selective laser melting)
- (2019) Maria L. Montero-Sistiaga et al. MATERIALS & DESIGN
- Mechanical Properties of Tool Steels with High Wear Resistance via Directed Energy Deposition
- (2019) Gyeong Yun Baek et al. Metals
- Microstructural Evolution of Post-Processed Hastelloy X Alloy Fabricated by Laser Powder Bed Fusion
- (2019) Giulio Marchese et al. Materials
- Predicting the Microstructural Evolution of Electron Beam Melting of Alloy 718 with Phase-Field Modeling
- (2019) Chamara Kumara et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- On the solidification behaviour and cracking origin of a nickel-based superalloy during selective laser melting
- (2019) Chunlei Qiu et al. MATERIALS CHARACTERIZATION
- Understanding processing parameters affecting residual stress in selective laser melting of Inconel 718 through numerical modeling
- (2019) Jia Song et al. JOURNAL OF MATERIALS RESEARCH
- High-throughput fabrication of nickel-based alloys with different Nb contents via a dual-feed additive manufacturing system: Effect of Nb content on microstructural and mechanical properties
- (2019) Decheng Kong et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Multiscale characterization of microstructures and mechanical properties of Inconel 718 fabricated by selective laser melting
- (2019) Sharniece Holland et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of heat treatment on mechanical property and microstructure of a powder metallurgy nickel-based superalloy
- (2019) Hongyu Wu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Study on the element segregation and Laves phase formation in the laser metal deposited IN718 superalloy by flat top laser and gaussian distribution laser
- (2019) Yuan Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Laser-assisted directed energy deposition of nickel super alloys: A review
- (2019) AN Jinoop et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
- The Influence of Process Parameters and Build Orientation on the Creep Behaviour of a Laser Powder Bed Fused Ni-based Superalloy for Aerospace Applications
- (2019) Hani Hilal et al. Materials
- Probabilistic neural network identification of an alloy for direct laser deposition
- (2019) B.D. Conduit et al. MATERIALS & DESIGN
- Microstructure formed during selective laser melting of IN738LC in keyhole mode
- (2019) T. Guraya et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Mechanisms driving high-cycle fatigue life of as-built Inconel 718 processed by laser powder bed fusion
- (2019) Dillon S. Watring et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On the Evolution of Primary Gamma Prime Precipitates During High Temperature and High Strain Rate Deformation and Subsequent Heat Treatment in the Ni-Based Superalloy, RR1000
- (2019) N. D’Souza et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of heat treatment on the high temperature fatigue life of single crystalline nickel base superalloy additively manufactured by means of selective electron beam melting
- (2019) Carla Meid et al. SCRIPTA MATERIALIA
- Cracking during thermal post-processing of laser powder bed fabricated CM247LC Ni-superalloy
- (2019) John H. Boswell et al. MATERIALS & DESIGN
- Effect of preheating on the thermal, microstructural and mechanical properties of selective electron beam melted Ti-6Al-4V components
- (2019) Chu Lun Alex Leung et al. MATERIALS & DESIGN
- Atomic-scale grain boundary engineering to overcome hot-cracking in additively-manufactured superalloys
- (2019) Paraskevas Kontis et al. ACTA MATERIALIA
- Creep properties of single crystal Ni-base superalloys (SX): A comparison between conventionally cast and additive manufactured CMSX-4 materials
- (2019) D. Bürger et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural evolution and mechanical properties of Inconel 718 superalloy thin wall fabricated by pulsed plasma arc additive manufacturing
- (2019) Kaibo Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Evaluation of additive electron beam melting of haynes 282 alloy
- (2019) K.A. Unocic et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Analysis of formation and growth of the σ phase in additively manufactured functionally graded materials
- (2019) Lourdes D. Bobbio et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Graphene reinforced nickel-based superalloy composites fabricated by additive manufacturing
- (2019) Zhen Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of rene 41 alloy manufactured by laser powder bed fusion
- (2019) Sıla Ece Atabay et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The effects of stress relieving heat treatment on the microstructure and residual stress of Inconel 718 fabricated by laser metal powder bed fusion additive manufacturing process
- (2019) Xiaoqing Wang et al. Journal of Manufacturing Processes
- Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron Beam Melting
- (2018) Edouard Chauvet et al. ACTA MATERIALIA
- Notched fatigue testing of Inconel 718 prepared by selective laser melting
- (2018) D.B. Witkin et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Long fatigue crack propagation behavior of Inconel 625 processed by laser powder bed fusion: Influence of build orientation and post-processing conditions
- (2018) J.-R. Poulin et al. INTERNATIONAL JOURNAL OF FATIGUE
- Microstructure evolution, mechanical response and underlying thermodynamic mechanism of multi-phase strengthening WC/Inconel 718 composites using selective laser melting
- (2018) Mujian Xia et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Mitigation of hot cracking in Inconel 718 superalloy by ultrasonic vibration during gas tungsten arc welding
- (2018) R. Thavamani et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructural characterization of laser metal powder deposited Alloy 718
- (2018) Andreas Segerstark et al. MATERIALS CHARACTERIZATION
- Comparison of microstructures and mechanical properties of Inconel 718 alloy processed by selective laser melting and casting
- (2018) Dongyun Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of heat treatments on microstructure evolution and mechanical properties of Inconel 625 processed by laser powder bed fusion
- (2018) Giulio Marchese et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: Sample orientation dependence and effects of post heat treatments
- (2018) Dunyong Deng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Modelling of anisotropic elastic properties in alloy 718 built by electron beam melting
- (2018) Chamara Kumara et al. MATERIALS SCIENCE AND TECHNOLOGY
- Electron beam melting of Inconel 718: effects of processing and post-processing
- (2018) Peeyush Nandwana et al. MATERIALS SCIENCE AND TECHNOLOGY
- The Influence of Annealing Temperature and Time on the Formation of δ-Phase in Additively-Manufactured Inconel 625
- (2018) M. R. Stoudt et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- The Influence of the Support Structure on Residual Stress and Distortion in SLM Inconel 718 Parts
- (2018) Tatiana Mishurova et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Additive Manufacturing of Nickel Superalloys: Opportunities for Innovation and Challenges Related to Qualification
- (2018) S. S. Babu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure and Mechanical Properties of CMSX-4 Single Crystals Prepared by Additive Manufacturing
- (2018) C. Körner et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Characterization of Ni-Based Superalloy Built by Selective Laser Melting and Electron Beam Melting
- (2018) Yen-Ling Kuo et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Asymmetric Cracking in Mar-M247 Alloy Builds During Electron Beam Powder Bed Fusion Additive Manufacturing
- (2018) Y. S. Lee et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Correlation of Microstructure to Creep Response of Hot Isostatically Pressed and Aged Electron Beam Melted Inconel 718
- (2018) Benjamin Shassere et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Review on thermal analysis in laser-based additive manufacturing
- (2018) Zhaorui Yan et al. OPTICS AND LASER TECHNOLOGY
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- Producing Ni-base superalloys single crystal by selective electron beam melting
- (2018) Edouard Chauvet et al. SCRIPTA MATERIALIA
- The Effect of Post-Processes on the Microstructure and Creep Properties of Alloy718 Built Up by Selective Laser Melting
- (2018) Yen-Ling Kuo et al. Materials
- Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
- (2018) Y. Kok et al. MATERIALS & DESIGN
- The printability, microstructure, crystallographic features and microhardness of selective laser melted Inconel 718 thin wall
- (2018) Huihui Yang et al. MATERIALS & DESIGN
- Influence of build layout and orientation on microstructural characteristics of electron beam melted Alloy 718
- (2018) P. Karimi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of Selective Laser Melting additive manufacturing parameters of Inconel 718 on porosity, microstructure and mechanical properties
- (2018) K. Moussaoui et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Process-Defect-Structure-Property Correlations During Laser Powder Bed Fusion of Alloy 718: Role of In Situ and Ex Situ Characterizations
- (2018) S. J. Foster et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Geometry-Induced Spatial Variation of Microstructure Evolution During Selective Electron Beam Melting of Rene-N5
- (2018) Curtis Lee Frederick et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Anisotropy of nickel-based superalloy K418 fabricated by selective laser melting
- (2018) Zhen Chen et al. Progress in Natural Science-Materials International
- On the formation of microstructural gradients in a nickel-base superalloy during electron beam melting
- (2018) Dunyong Deng et al. MATERIALS & DESIGN
- Influence of successive thermal cycling on microstructure evolution of EBM-manufactured alloy 718 in track-by-track and layer-by-layer design
- (2018) Paria Karimi et al. MATERIALS & DESIGN
- Additive manufacturing of functionally graded transition joints between ferritic and austenitic alloys
- (2018) J.S. Zuback et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Causes analysis on cracks in nickel-based single crystal superalloy fabricated by laser powder deposition additive manufacturing
- (2018) Zhipeng Zhou et al. MATERIALS & DESIGN
- Effect of anisotropy and texture on the low cycle fatigue behavior of Inconel 718 processed via electron beam melting
- (2017) M.M. Kirka et al. INTERNATIONAL JOURNAL OF FATIGUE
- Induced porosity in Super Alloy 718 through the laser additive manufacturing process: Microstructure and mechanical properties
- (2017) Mario Valdez et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Dimensionless numbers in additive manufacturing
- (2017) T. Mukherjee et al. JOURNAL OF APPLIED PHYSICS
- On the Effects of the Rejuvenation Treatment on Mechanical and Microstructural Properties of IN-738 Superalloy
- (2017) Cosimo Monti et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Numerical simulation of multi-component evaporation during selective electron beam melting of TiAl
- (2017) Alexander Klassen et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effects of laser modes on Nb segregation and Laves phase formation during laser additive manufacturing of nickel-based superalloy
- (2017) H. Xiao et al. MATERIALS LETTERS
- Fatigue crack growth rate and tensile strength of Re modified Inconel 718 produced by means of selective laser melting
- (2017) Tomasz Brynk et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The tensile deformation behavior of laser repaired Inconel 718 with a non-uniform microstructure
- (2017) Shang Sui et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing
- (2017) Mang Ni et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and anisotropic mechanical properties of EBM manufactured Inconel 718 and effects of post heat treatments
- (2017) Dunyong Deng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment
- (2017) Wakshum M. Tucho et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Elevated temperature mechanical behavior of IN625 alloy processed by laser powder-bed fusion
- (2017) Alena Kreitcberg et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanical behavior of post-processed Inconel 718 manufactured through the electron beam melting process
- (2017) Michael M. Kirka et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of heat treatment and hot isostatic pressing on the microstructure and mechanical properties of Inconel 625 alloy processed by laser powder bed fusion
- (2017) Alena Kreitcberg et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Formation of the Ni3Nb δ-Phase in Stress-Relieved Inconel 625 Produced via Laser Powder-Bed Fusion Additive Manufacturing
- (2017) Eric A. Lass et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Investigation on the optimized heat treatment procedure for laser fabricated IN718 alloy
- (2017) Yaocheng Zhang et al. OPTICS AND LASER TECHNOLOGY
- Densification and microstructural investigation of Inconel 718 parts fabricated by selective laser melting
- (2017) Joon-Phil Choi et al. POWDER TECHNOLOGY
- Homogenization kinetics of a nickel-based superalloy produced by powder bed fusion laser sintering
- (2017) Fan Zhang et al. SCRIPTA MATERIALIA
- Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing
- (2017) Yen-Ling Kuo et al. SCRIPTA MATERIALIA
- Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments
- (2017) Ahmad Mostafa et al. Metals
- Neutron residual stress measurement and numerical modeling in a curved thin-walled structure by laser powder bed fusion additive manufacturing
- (2017) Ke An et al. MATERIALS & DESIGN
- Effect of hatch length on the development of microstructure, texture and residual stresses in selective laser melted superalloy Inconel 718
- (2017) Naresh Nadammal et al. MATERIALS & DESIGN
- Variation of hardness, microstructure, and Laves phase distribution in direct laser deposited alloy 718 cuboids
- (2017) Erica L. Stevens et al. MATERIALS & DESIGN
- Functionally graded Inconel 718 processed by additive manufacturing: Crystallographic texture, anisotropy of microstructure and mechanical properties
- (2017) V.A. Popovich et al. MATERIALS & DESIGN
- Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting
- (2017) V.A. Popovich et al. MATERIALS & DESIGN
- Selective laser melting of Invar 36: Microstructure and properties
- (2016) Chunlei Qiu et al. ACTA MATERIALIA
- Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing
- (2016) Narendran Raghavan et al. ACTA MATERIALIA
- Characterization and Comparison of Inconel 625 Processed by Selective Laser Melting and Laser Metal Deposition
- (2016) Giulio Marchese et al. ADVANCED ENGINEERING MATERIALS
- Influences of deposition current and interpass temperature to the Fe3Al-based iron aluminide fabricated using wire-arc additive manufacturing process
- (2016) Chen Shen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A study on the residual stress during selective laser melting (SLM) of metallic powder
- (2016) Yang Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Low cycle fatigue behavior of direct metal laser sintered Inconel alloy 718
- (2016) Sean Gribbin et al. INTERNATIONAL JOURNAL OF FATIGUE
- The metallurgy and processing science of metal additive manufacturing
- (2016) W. J. Sames et al. INTERNATIONAL MATERIALS REVIEWS
- Microstructure, Fatigue Behavior, and Failure Mechanisms of Direct Laser-Deposited Inconel 718
- (2016) Alex S. Johnson et al. JOM
- Microstructure Development in Electron Beam-Melted Inconel 718 and Associated Tensile Properties
- (2016) M. M. Kirka et al. JOM
- Prediction of primary dendritic arm spacing during laser rapid directional solidification of single-crystal nickel-base superalloys
- (2016) Yao-Jian Liang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Formation of novel graded interface and its function on mechanical properties of WC 1−x reinforced Inconel 718 composites processed by selective laser melting
- (2016) Ting Rong et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Dendritic microstructure and hot cracking of laser additive manufactured Inconel 718 under improved base cooling
- (2016) Yuan Chen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Morphology evolution of γ′ phase in K465 nickel-base superalloy during laser forming repairing
- (2016) Qiuge Li et al. JOURNAL OF LASER APPLICATIONS
- Selective Laser Melting of Graphene-Reinforced Inconel 718 Superalloy: Evaluation of Microstructure and Tensile Performance
- (2016) Yachao Wang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Effect of different heat treatments on the microstructure and mechanical properties in selective laser melted INCONEL 718 alloy
- (2016) S. Raghavan et al. MATERIALS AND MANUFACTURING PROCESSES
- Anisotropy in creep properties of DS200 + Hf alloy
- (2016) L. Mataveli Suave et al. MATERIALS AT HIGH TEMPERATURES
- Microstructure and mechanical behavior of direct metal laser sintered Inconel alloy 718
- (2016) Derek H. Smith et al. MATERIALS CHARACTERIZATION
- Superior creep strength of a nickel-based superalloy produced by selective laser melting
- (2016) M. Pröbstle et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Erratum to: ‘Grain structure evolution in Inconel 718 during selective electron beam melting’ [Mater. Sci. Eng. A 668 (2016) 180–187]
- (2016) H. Helmer et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On the microstructural and mechanical properties of post-treated additively manufactured Inconel 718 superalloy under quasi-static and cyclic loading
- (2016) M.E. Aydinöz et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural characteristics of the nickel-based alloy IN738LC and the cobalt-based alloy Mar-M509 produced by selective laser melting
- (2016) Michael Cloots et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of post heat treatments on anisotropy of mechanical behaviour and microstructure of Hastelloy-X parts produced by selective laser melting
- (2016) Dacian Tomus et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure of the Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting
- (2016) Markus Ramsperger et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Additive manufacturing of Ni-based superalloys: The outstanding issues
- (2016) Moataz M. Attallah et al. MRS BULLETIN
- Review on powder-bed laser additive manufacturing of Inconel 718 parts
- (2016) Xiaoqing Wang et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Fabrication of NiTi through additive manufacturing: A review
- (2016) Mohammad Elahinia et al. PROGRESS IN MATERIALS SCIENCE
- Evaluation of a temperature measurement method developed for laser metal deposition
- (2016) Andreas Segerstark et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effects of tailored gradient interface on wear properties of WC/Inconel 718 composites using selective laser melting
- (2016) Ting Rong et al. SURFACE & COATINGS TECHNOLOGY
- Microstructural characteristics and mechanical properties of carbon nanotube reinforced Inconel 625 parts fabricated by selective laser melting
- (2016) Pei Wang et al. MATERIALS & DESIGN
- Printability of alloys for additive manufacturing
- (2016) T. Mukherjee et al. Scientific Reports
- Phase and grain size inhomogeneity and their influences on creep behavior of Co–Cr–Mo alloy additive manufactured by electron beam melting
- (2015) Shi-Hai Sun et al. ACTA MATERIALIA
- Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition
- (2015) W. Xu et al. ACTA MATERIALIA
- Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach
- (2015) Neil J. Harrison et al. ACTA MATERIALIA
- Mechanical and Microstructural Investigation of Nickel-Based Superalloy IN718 Manufactured by Selective Laser Melting (SLM)
- (2015) Johannes Strößner et al. ADVANCED ENGINEERING MATERIALS
- Transient thermal modeling of laser-based additive manufacturing for 3D freeform structures
- (2015) Erdem Kundakcioglu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys
- (2015) Erik R. Denlinger et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure Characteristics of Inconel 625 Superalloy Manufactured by Selective Laser Melting
- (2015) Shuai Li et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy
- (2015) Dongyun Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Laser additive manufacturing of ultrafine TiC particle reinforced Inconel 625 based composite parts: Tailored microstructures and enhanced performance
- (2015) Chen Hong et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting
- (2015) E. Chlebus et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM)
- (2015) Karsten Kunze et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Characterization of Plastic Flow Pertinent to the Evolution of Bulk Residual Stress in Powder-Metallurgy, Nickel-Base Superalloys
- (2015) S. L. Semiatin et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy
- (2015) Yanjin Lu et al. OPTICS AND LASER TECHNOLOGY
- In situ heat treatment in selective laser melted martensitic AISI 420 stainless steels
- (2015) P. Krakhmalev et al. MATERIALS & DESIGN
- Progress of phase-field investigations of γ′ rafting in nickel-base single-crystal superalloys
- (2014) Yan Zhao et al. CHINESE SCIENCE BULLETIN
- The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy
- (2014) Luke N. Carter et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Correlation Between Microstructure and Mechanical Properties in an Inconel 718 Deposit Produced via Electron Beam Freeform Fabrication
- (2014) Wesley A. Tayon et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Thermal effects on microstructural heterogeneity of Inconel 718 materials fabricated by electron beam melting
- (2014) William J. Sames et al. JOURNAL OF MATERIALS RESEARCH
- Microstructural and texture development in direct laser fabricated IN718
- (2014) Lakshmi L. Parimi et al. MATERIALS CHARACTERIZATION
- Microstructural Evolutions During Thermal Aging of Alloy 625: Impact of Temperature and Forming Process
- (2014) Lorena Mataveli Suave et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- The Effect of Forging Variables on the Supersolvus Heat-Treatment Response of Powder-Metallurgy Nickel-Base Superalloys
- (2014) S. L. Semiatin et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Rationalization of Microstructure Heterogeneity in INCONEL 718 Builds Made by the Direct Laser Additive Manufacturing Process
- (2014) Yuan Tian et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Selective laser melting additive manufactured Inconel 718 superalloy parts: High-temperature oxidation property and its mechanisms
- (2014) Qingbo Jia et al. OPTICS AND LASER TECHNOLOGY
- Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control
- (2014) John A. Slotwinski et al. JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
- Build direction dependence of microstructure and high-temperature tensile property of Co–Cr–Mo alloy fabricated by electron beam melting
- (2013) Shi-Hai Sun et al. ACTA MATERIALIA
- Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties
- (2013) Qingbo Jia et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effects of Interpass Idle Time on Thermal Stresses in Multipass Multilayer Weld-Based Rapid Prototyping
- (2013) Huihui Zhao et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Microstructural Evolution and Mechanical Properties of Inconel 625 Alloy during Pulsed Plasma Arc Deposition Process
- (2013) Fujia Xu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- High temperature material properties of IN738LC processed by selective laser melting (SLM) technology
- (2013) L. Rickenbacher et al. RAPID PROTOTYPING JOURNAL
- Grain-boundary precipitation in Allvac 718Plus
- (2012) E.J. Pickering et al. ACTA MATERIALIA
- Strain Effect on the γ′ Dissolution at High Temperatures of a Nickel-Based Single Crystal Superalloy
- (2012) Rémi Giraud et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructural changes in a laser solid forming Inconel 718 superalloy thin wall in the deposition direction
- (2012) Fencheng Liu et al. OPTICS AND LASER TECHNOLOGY
- Effect of overlap rate on recrystallization behaviors of Laser Solid Formed Inconel 718 superalloy
- (2012) Jun Cao et al. OPTICS AND LASER TECHNOLOGY
- Solidification microstructure of directionally solidified superalloy under high temperature gradient
- (2012) Weiguo Zhang et al. RARE METALS
- Mechanical property study on rapid additive layer manufacture Hastelloy® X alloy by selective laser melting technology
- (2011) Fude Wang INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The microstructure and mechanical properties of deposited-IN718 by selective laser melting
- (2011) Zemin Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Thermomechanical analysis of multi-bead pulsed laser powder deposition of a nickel-based superalloy
- (2011) Chunbo (Sam) Zhang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy
- (2011) T. Vilaro et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural Architecture, Microstructures, and Mechanical Properties for a Nickel-Base Superalloy Fabricated by Electron Beam Melting
- (2011) L. E. Murr et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Finite element modeling of multi-pass welding and shaped metal deposition processes
- (2010) Michele Chiumenti et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- The effect of laser scanning path on microstructures and mechanical properties of laser solid formed nickel-base superalloy Inconel 718
- (2010) Fencheng Liu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Improvement of mechanical properties of ferritic stainless steel weld metal by ultrasonic vibration
- (2010) Takehiko Watanabe et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Residual stresses in laser direct metal deposited Waspaloy
- (2010) R.J. Moat et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The Origin of Microstructural Diversity, Texture, and Mechanical Properties in Electron Beam Melted Ti-6Al-4V
- (2010) S. S. Al-Bermani et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy
- (2010) Fencheng Liu et al. OPTICS AND LASER TECHNOLOGY
- Microstructure and mechanical properties of nickel based superalloy IN718 produced by rapid prototyping with electron beam melting (EBM)
- (2009) A Strondl et al. MATERIALS SCIENCE AND TECHNOLOGY
- Studies of Standard Heat Treatment Effects on Microstructure and Mechanical Properties of Laser Net Shape Manufactured INCONEL 718
- (2009) H. Qi et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Study on microstructure and mechanical properties of laser rapid forming Inconel 718
- (2007) Xiaoming Zhao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started