Implementing FDM 3D Printing Strategies Using Natural Fibers to Produce Biomass Composite
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Implementing FDM 3D Printing Strategies Using Natural Fibers to Produce Biomass Composite
Authors
Keywords
-
Journal
Materials
Volume 13, Issue 18, Pages 4065
Publisher
MDPI AG
Online
2020-09-14
DOI
10.3390/ma13184065
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Energy grass/polylactic acid composites and pretreatments for additive manufacturing
- (2020) Sen Ma et al. CELLULOSE
- Fused Deposition Modeling of Poly (lactic acid)/Macadamia Composites—Thermal, Mechanical Properties and Scaffolds
- (2020) Xiaohui Song et al. Materials
- Mechanical characteristics of oil palm fiber reinforced thermoplastics as filament for fused deposition modeling (FDM)
- (2020) Mohd Nazri Ahmad et al. Advances in Manufacturing
- 3D microstructural characterization and mechanical properties determination of short basalt fiber-reinforced polyamide 6,6 composites
- (2020) Siwon Yu et al. COMPOSITES PART B-ENGINEERING
- Three-dimensional printing of poly(lactic acid) bio-based composites with sugarcane bagasse fiber: Effect of printing orientation on tensile performance
- (2019) Hao Liu et al. POLYMERS FOR ADVANCED TECHNOLOGIES
- The Role of 3D Printing in Medical Applications: A State of the Art
- (2019) Anna Aimar et al. Journal of Healthcare Engineering
- Additive Manufacturing of Geopolymers Modified with Microalgal Biomass Biofiller from Wastewater Treatment Plants
- (2019) Emanuele Agnoli et al. Materials
- A fibrous cellulose paste formulation to manufacture structural parts using 3D printing by extrusion
- (2019) C. Thibaut et al. CARBOHYDRATE POLYMERS
- Bacterial cellulose nanofibers promote stress and fidelity of 3D-printed silk based hydrogel scaffold with hierarchical pores
- (2019) Li Huang et al. CARBOHYDRATE POLYMERS
- Development of short basalt fiber reinforced polylactide composites and their feasible evaluation for 3D printing applications
- (2019) Lin Sang et al. COMPOSITES PART B-ENGINEERING
- FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties
- (2019) Valentina Mazzanti et al. Polymers
- Mechanical characteristics of wood, ceramic, metal and carbon fiber-based PLA composites fabricated by FDM
- (2019) Zhaobing Liu et al. Journal of Materials Research and Technology-JMR&T
- Recycled Cellulose Polypropylene Composite Feedstocks for Material Extrusion Additive Manufacturing
- (2019) Nicole E. Zander et al. ACS Omega
- Polylactide/hemp hurd biocomposites as sustainable 3D printing feedstock
- (2019) Xianglian Xiao et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Phosphor powders‐incorporated polylactic acid polymeric composite used as 3D printing filaments with green luminescence properties
- (2019) Meiling Wan et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Lignin: A Biopolymer from Forestry Biomass for Biocomposites and 3D Printing
- (2019) Mihaela Tanase-Opedal et al. Materials
- Microstructure and Mechanical Performance of 3D Printed Wood-PLA/PHA Using Fused Deposition Modelling: Effect of Printing Temperature
- (2019) Guessasma et al. Polymers
- 3D printing of continuous flax fibre reinforced biocomposites for structural applications
- (2019) A. Le Duigou et al. MATERIALS & DESIGN
- Influence of Rice Husk and Wood Biomass Properties on the Manufacture of Filaments for Fused Deposition Modeling
- (2019) Marie-Joo Le Guen et al. Frontiers in Chemistry
- Combination and processing keratin with lignin as biocomposite materials for additive manufacturing technology
- (2019) Warren J. Grigsby et al. Acta Biomaterialia
- Biobased thermoplastic elastomer with seamless 3D-Printability and superior mechanical properties empowered by in-situ polymerization in the presence of nanocellulose
- (2019) Jun Mo Koo et al. COMPOSITES SCIENCE AND TECHNOLOGY
- 3D printing with cellulose materials
- (2018) Qianqian Wang et al. CELLULOSE
- Sustainable composite fused deposition modelling filament using recycled pre-consumer polypropylene
- (2018) David Stoof et al. COMPOSITES PART B-ENGINEERING
- Fabrication of flexible wood flour/thermoplastic polyurethane elastomer composites using fused deposition molding
- (2018) Hongjie Bi et al. INDUSTRIAL CROPS AND PRODUCTS
- A novel free-hanging 3D printing method for continuous carbon fiber reinforced thermoplastic lattice truss core structures
- (2018) Shuting Liu et al. MATERIALS & DESIGN
- Bio-polyethylene reinforced with thermomechanical pulp fibers: Mechanical and micromechanical characterization and its application in 3D-printing by fused deposition modelling
- (2018) Q. Tarrés et al. COMPOSITES PART B-ENGINEERING
- Production and characterization of bamboo and flax fiber reinforced polylactic acid filaments for fused deposition modeling (FDM)
- (2018) Delphine Depuydt et al. POLYMER COMPOSITES
- Investigation of ABS-rice straw composite feedstock filament for FDM
- (2018) Mohammed Ali Osman et al. RAPID PROTOTYPING JOURNAL
- Cork–PLA composite filaments for fused deposition modelling
- (2018) Fugen Daver et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Thermal properties of spray-dried cellulose nanofibril-reinforced polypropylene composites from extrusion-based additive manufacturing
- (2018) Lu Wang et al. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
- Mechanical and thermal properties of bamboo fiber reinforced polypropylene/polylactic acid composites for 3D printing
- (2018) Haibo Long et al. POLYMER ENGINEERING AND SCIENCE
- A path for lignin valorization via additive manufacturing of high-performance sustainable composites with enhanced 3D printability
- (2018) Ngoc A. Nguyen et al. Science Advances
- Cocoa Shell Waste Biofilaments for 3D Printing Applications
- (2017) Thi Nga Tran et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- 3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance
- (2017) Chuncheng Yang et al. RAPID PROTOTYPING JOURNAL
- Fused Deposition Modeling (FDM) 3D Printed Tablets for Intragastric Floating Delivery of Domperidone
- (2017) Xuyu Chai et al. Scientific Reports
- Progress in 3D Printing of Carbon Materials for Energy-Related Applications
- (2016) Kun Fu et al. ADVANCED MATERIALS
- 3D-printing technologies for electrochemical applications
- (2016) Adriano Ambrosi et al. CHEMICAL SOCIETY REVIEWS
- Experimental and theoretical investigation of prestressed natural fiber-reinforced polylactic acid (PLA) composite materials
- (2016) Sean A. Hinchcliffe et al. COMPOSITES PART B-ENGINEERING
- Three dimensional ink-jet printing of biomaterials using ionic liquids and co-solvents
- (2016) Deshani H. A. T. Gunasekera et al. FARADAY DISCUSSIONS
- Hot-melt extruded filaments based on pharmaceutical grade polymers for 3D printing by fused deposition modeling
- (2016) Alice Melocchi et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Rethinking Timber: Investigation into the Use of Waste Macadamia Nut Shells for Additive Manufacturing
- (2016) Jordan Girdis et al. JOM
- Printing soft matter in three dimensions
- (2016) Ryan L. Truby et al. NATURE
- The chemical, mechanical, and physical properties of 3D printed materials composed of TiO2-ABS nanocomposites
- (2016) Matthew R. Skorski et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Three dimensional printed macroporous polylactic acid/hydroxyapatite composite scaffolds for promoting bone formation in a critical-size rat calvarial defect model
- (2016) Haifeng Zhang et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Three dimensional ink-jet printing of biomaterials using ionic liquids and co-solvents
- (2016) Deshani H. A. T. Gunasekera et al. FARADAY DISCUSSIONS
- Designing Biomaterials for 3D Printing
- (2016) Murat Guvendiren et al. ACS Biomaterials-Science & Engineering
- 3D printing of wood fibre biocomposites: From mechanical to actuation functionality
- (2016) A. Le Duigou et al. MATERIALS & DESIGN
- Designing Biomaterials for 3D Printing
- (2016) Murat Guvendiren et al. ACS Biomaterials Science & Engineering
- Strategies and Molecular Design Criteria for 3D Printable Hydrogels
- (2015) Tomasz Jungst et al. CHEMICAL REVIEWS
- Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
- (2015) Fuda Ning et al. COMPOSITES PART B-ENGINEERING
- Biomass-derived materials for electrochemical energy storages
- (2015) Lixue Zhang et al. PROGRESS IN POLYMER SCIENCE
- A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing
- (2015) Seyed Farid Seyed Shirazi et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
- (2014) Bethany C. Gross et al. ANALYTICAL CHEMISTRY
- Nanofibrillated cellulose originated from birch sawdust after sequential extractions: a promising polymeric material from waste to films
- (2014) Jun Liu et al. CELLULOSE
- 3D bioprinting of tissues and organs
- (2014) Sean V Murphy et al. NATURE BIOTECHNOLOGY
- 3D Printing Gets a Boost and Opportunities with Polymer Materials
- (2014) Manfred Hofmann ACS Macro Letters
- Wood based bulk material in 3D printing processes for applications in construction
- (2012) Klaudius Henke et al. European Journal of Wood and Wood Products
- Laser additive manufacturing of metallic components: materials, processes and mechanisms
- (2012) D D Gu et al. INTERNATIONAL MATERIALS REVIEWS
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started