A Review on Reinforcement Methods for Polymeric Materials Processed Using Fused Filament Fabrication (FFF)
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
A Review on Reinforcement Methods for Polymeric Materials Processed Using Fused Filament Fabrication (FFF)
Authors
Keywords
-
Journal
Polymers
Volume 13, Issue 22, Pages 4022
Publisher
MDPI AG
Online
2021-11-22
DOI
10.3390/polym13224022
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Effects of extruder temperatures and raster orientations on mechanical properties of the FFF-processed polylactic-acid (PLA) material
- (2021) Budi Arifvianto et al. RAPID PROTOTYPING JOURNAL
- Failure characterization of PLA parts fabricated by fused deposition modeling using acoustic emission
- (2020) Feng Li et al. RAPID PROTOTYPING JOURNAL
- Not all PLA filaments are created equal: an experimental investigation
- (2020) Johanna J. Schwartz et al. RAPID PROTOTYPING JOURNAL
- Fatigue behaviour of FDM-3D printed polymers, polymeric composites and architected cellular materials
- (2020) Vigneshwaran Shanmugam et al. INTERNATIONAL JOURNAL OF FATIGUE
- Effect of post-heat treatment cooling on microstructure and mechanical properties of selective laser melting manufactured austenitic 316L stainless steel
- (2020) Saad Waqar et al. RAPID PROTOTYPING JOURNAL
- Tailoring physico-mechanical properties and rheological behavior of ABS filaments for FDM via blending with SEBS TPE
- (2020) Mozhgan Sayanjali et al. RAPID PROTOTYPING JOURNAL
- Customized design and additive manufacturing of kids’ ankle foot orthosis
- (2020) Harish Kumar Banga et al. RAPID PROTOTYPING JOURNAL
- Mechanical properties and water absorption behaviour of PLA and PLA/wood composites prepared by 3D printing and injection moulding
- (2019) Josef Valentin Ecker et al. RAPID PROTOTYPING JOURNAL
- Separated 3D printing of continuous carbon fiber reinforced thermoplastic polyimide
- (2019) Wenli Ye et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Improving the forming quality of fused filament fabrication parts by applied vibration
- (2019) Shijie Jiang et al. RAPID PROTOTYPING JOURNAL
- The quantitative analysis of tensile strength of additively manufactured continuous carbon fiber reinforced polylactic acid (PLA)
- (2019) Hongbin Li et al. RAPID PROTOTYPING JOURNAL
- Increasing strength of FFF three-dimensional printed parts by influencing on temperature-related parameters of the process
- (2019) Vladimir E. Kuznetsov et al. RAPID PROTOTYPING JOURNAL
- Antibacterial silver submicron wire-polylactic acid composites for fused filament fabrication
- (2019) Jenna Stephanie Walker et al. RAPID PROTOTYPING JOURNAL
- Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites
- (2019) M. Heidari-Rarani et al. COMPOSITES PART B-ENGINEERING
- Effects of processing conditions on mechanical properties of PLA printed parts
- (2019) Morteza Behzadnasab et al. RAPID PROTOTYPING JOURNAL
- 3D printing of continuous flax fibre reinforced biocomposites for structural applications
- (2019) A. Le Duigou et al. MATERIALS & DESIGN
- Ultrasound-assisted 3D printing of continuous fiber-reinforced thermoplastic (FRTP) composites
- (2019) Jing Qiao et al. Additive Manufacturing
- Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling
- (2018) M.A. Caminero et al. POLYMER TESTING
- Investigation of influence of heat treatment on mechanical strength of FDM printed 3D objects
- (2018) Wonjin Jo et al. RAPID PROTOTYPING JOURNAL
- Effects of micro particle reinforcement on mechanical properties of 3D printed parts
- (2018) Ebubekir Çantı et al. RAPID PROTOTYPING JOURNAL
- Fabrication and stress analysis of ankle foot orthosis with additive manufacturing
- (2018) Harish Kumar Banga et al. RAPID PROTOTYPING JOURNAL
- Investigation of ABS-rice straw composite feedstock filament for FDM
- (2018) Mohammed Ali Osman et al. RAPID PROTOTYPING JOURNAL
- Mechanical reliability of short carbon fiber reinforced ABS produced via vibration assisted fused deposition modeling
- (2018) Özgür Keleş et al. RAPID PROTOTYPING JOURNAL
- Effect of temperature on the mechanical properties of 3D-printed PLA tensile specimens
- (2018) Marzio Grasso et al. RAPID PROTOTYPING JOURNAL
- Effect of process parameters on tensile strength of FDM printed PLA part
- (2018) Shilpesh R. Rajpurohit et al. RAPID PROTOTYPING JOURNAL
- The influence of the 3D-printing technology on the physical and mechanical properties of polyphenylene sulfone
- (2018) Azamat Ladinovich Slonov et al. RAPID PROTOTYPING JOURNAL
- Experimental investigations on natural fiber embedded additive manufacturing-based biodegradable structures for biomedical applications
- (2018) Amarveer Singh Mangat et al. RAPID PROTOTYPING JOURNAL
- Effect of post-processing on the dimensional accuracy of small plastic additive manufactured parts
- (2018) Joseph Nsengimana et al. RAPID PROTOTYPING JOURNAL
- FDM 3D printing of MWCNT re-inforced ABS nano-composite parts with enhanced mechanical and electrical properties
- (2018) H. Kürşad Sezer et al. Journal of Manufacturing Processes
- Effect of build orientation on the mechanical reliability of 3D printed ABS
- (2017) Özgür Keleş et al. RAPID PROTOTYPING JOURNAL
- Experimental characterization of the mechanical properties of 3D-printed ABS and polycarbonate parts
- (2017) Jason T. Cantrell et al. RAPID PROTOTYPING JOURNAL
- Influence of processing parameters on creep and recovery behavior of FDM manufactured part using definitive screening design and ANN
- (2017) Omar Ahmed Mohamed et al. RAPID PROTOTYPING JOURNAL
- Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection
- (2017) J.M. Chacón et al. MATERIALS & DESIGN
- Fused deposition modelling with ABS–graphene nanocomposites
- (2016) Sithiprumnea Dul et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
- (2016) Xiaoyong Tian et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- 3D printing with polymers: Challenges among expanding options and opportunities
- (2016) Jeffrey W. Stansbury et al. DENTAL MATERIALS
- Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing
- (2016) Nanya Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Development of ABS based wire as feedstock filament of FDM for industrial applications
- (2016) Rupinder Singh et al. RAPID PROTOTYPING JOURNAL
- Investigating the influence of infill percentage on the mechanical properties of fused deposition modelled ABS parts
- (2016) Kenny Álvarez et al. Ingenieria e Investigacion
- Investigating the influence of infill percentage on the mechanical properties of fused deposition modelled ABS parts
- (2016) Kenny Álvarez et al. Ingenieria e Investigacion
- Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques
- (2016) Michael Dawoud et al. Journal of Manufacturing Processes
- Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing
- (2016) Zixiang Weng et al. MATERIALS & DESIGN
- Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
- (2016) Ryosuke Matsuzaki et al. Scientific Reports
- Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
- (2015) Fuda Ning et al. COMPOSITES PART B-ENGINEERING
- Additive manufacturing under pressure
- (2015) Jason B. Jones et al. RAPID PROTOTYPING JOURNAL
- Tensile and fatigue behavior of layered acrylonitrile butadiene styrene
- (2015) Sophia Ziemian et al. RAPID PROTOTYPING JOURNAL
- The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3-D printer
- (2015) Antonio Lanzotti et al. RAPID PROTOTYPING JOURNAL
- Fused deposition modeling with polypropylene
- (2015) O.S. Carneiro et al. MATERIALS & DESIGN
- Highly oriented carbon fiber–polymer composites via additive manufacturing
- (2014) Halil L. Tekinalp et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Experimental investigation of FDM process for improvement of mechanical properties and production cost
- (2014) Ismail Durgun et al. RAPID PROTOTYPING JOURNAL
- Investigation of erosive wear behavior and physical properties of SGF and/or calcite reinforced ABS/PA6 composites
- (2012) N. Gamze Karsli et al. COMPOSITES PART B-ENGINEERING
- Additive manufacturing and its societal impact: a literature review
- (2012) Samuel H. Huang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The mechanical behavior of poly(lactic acid) unreinforced and nanocomposite films subjected to monotonic and fatigue loading conditions
- (2011) Rodney D. Averett et al. JOURNAL OF COMPOSITE MATERIALS
- Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling
- (2011) M. Nikzad et al. MATERIALS & DESIGN
- Experimental investigation and empirical modelling of FDM process for compressive strength improvement
- (2011) Anoop K. Sood et al. Journal of Advanced Research
- Parametric appraisal of mechanical property of fused deposition modelling processed parts
- (2009) Anoop Kumar Sood et al. MATERIALS & DESIGN
- Effect of processing conditions on the bonding quality of FDM polymer filaments
- (2008) Q. Sun et al. RAPID PROTOTYPING JOURNAL
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started