Enhanced electrical, mechanical and tribological properties of Cu-Cr-Zr alloys by continuous extrusion forming and subsequent aging treatment

Abnormal grain growth in a Zn-0.8Ag alloy after processing by high-pressure torsion

(2021) Wiktor Bednarczyk et al.   ACTA MATERIALIA

Properties and precipitates of the high strength and electrical conductivity Cu-Ni-Co-Si-Cr alloy

(2021) Yijie Ban et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

The precipitation behaviours and strengthening mechanism of a Cu-0.4 wt% Sc alloy

(2021) Zifan Hao et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Evolution of dislocation and stacking-fault densities for a Cu-0.7Cr-0.07Zr alloy during cryogenic tensile test: An in-situ synchrotron X-ray diffraction analysis

(2021) P.H.F. Oliveira et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Equal-channel angular pressing influencing the mean stress sensitivity in the high cycle fatigue regime of the 6082 aluminum alloy

(2020) Lisa Winter et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure evolution and microhardness of Mg-13Gd-4Y–2Zn-0.5Zr alloy via pre-solution and multi-directional forging (MDF) process

(2020) Beibei Dong et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure tailoring of Al0.5CoCrFeMnNi to achieve high strength and high uniform strain using severe plastic deformation and an annealing treatment

(2020) H.T. Jeong et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Study on electrical behaviour of copper and its alloys containing dispersed nanoparticles

(2019) Shuaihang Pan et al.   CURRENT APPLIED PHYSICS

Contribution of Zr to strength and grain refinement in Cu Cr Zr alloy

(2019) Jinshui Chen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

EBSD, XRD and SRS characterization of a casting Al-7wt%Si alloy processed by equal channel angular extrusion: Dislocation density evaluation

(2019) Zahra Zribi et al.   MATERIALS CHARACTERIZATION

A comparative study on the nanoindentation behavior, wear resistance and in vitro biocompatibility of SLM manufactured CP–Ti and EBM manufactured Ti64 gyroid scaffolds

(2019) Arash Ataee et al.   Acta Biomaterialia

Bulk Cu-NbC nanocomposites with high strength and high electrical conductivity

(2018) Wei Zeng et al.   JOURNAL OF ALLOYS AND COMPOUNDS

A multiscale architectured CuCrZr alloy with high strength, electrical conductivity and thermal stability

(2018) Ningning Liang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Influence of high pressure torsion-induced grain refinement and subsequent aging on tribological properties of Cu-Cr-Zr alloy

(2018) G. Purcek et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The influence of preaging on the strength and precipitation behavior of a deformed Al-Cu-Mg-Ag alloy

(2018) Song Bai et al.   JOURNAL OF ALLOYS AND COMPOUNDS

A new grain orientation spread approach to analyze the dynamic recrystallization behavior of a cast-homogenized Mg-Zn-Zr alloy using electron backscattered diffraction

(2018) A. Hadadzadeh et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and properties of a novel Cu-Mg-Ca alloy with high strength and high electrical conductivity

(2017) Yaping Li et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Nanoindentation study of mechanical properties of Ti based alloys with Fe and Ta additions

(2017) Shima Ehtemam-Haghighi et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Mechanism of continuous dynamic recrystallization in a 50Ti-47Ni-3Fe shape memory alloy during hot compressive deformation

(2017) Xiang-Qian Yin et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Phase transformation behaviors and properties of a high strength Cu-Ni-Si alloy

(2017) Qian Lei et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

On the microstructure and texture of Cu-Cr-Zr alloy after severe plastic deformation by ECAP

(2016) Khadidja Abib et al.   MATERIALS CHARACTERIZATION

Influence of microalloying with zirconium on the structure and properties of Cu–Cr alloy after high pressure torsion

(2016) D.V. Shangina et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of shock loading on the microstructure, mechanical properties and grain boundary characteristics of HT-9 ferritic/martensitic steels

(2016) E. Aydogan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Optimization of strength, ductility and electrical conductivity of Cu–Cr–Zr alloy by combining multi-route ECAP and aging

(2016) G. Purcek et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Grain refinement kinetics and strengthening mechanisms in Cu–0.3Cr–0.5Zr alloy subjected to intense plastic deformation

(2016) A.P. Zhilyaev et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure evolution of Cu–0.2Mg alloy during continuous extrusion process

(2015) Yuan Yuan et al.   JOURNAL OF MATERIALS RESEARCH

Modeling the electrical resistivity of deformation processed metal–metal composites

(2014) Liang Tian et al.   ACTA MATERIALIA

Mechanical and corrosion-resistant properties of Ti–Nb–Si–N nanocomposite films prepared by a double glow discharge plasma technique

(2014) Jiang Xu et al.   CERAMICS INTERNATIONAL

Effect of Nb addition on microstructure evolution and nanomechanical properties of a glass-forming Ti–Zr–Si alloy

(2013) S. Abdi et al.   INTERMETALLICS

An electron backscattered diffraction study on the dynamic recrystallization behavior of a nickel–chromium alloy (800H) during hot deformation

(2013) Yu Cao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions

(2013) Taku Sakai et al.   PROGRESS IN MATERIALS SCIENCE

Atomic scale investigation of Cr precipitation in copper

(2012) A. Chbihi et al.   ACTA MATERIALIA

Recrystallisation and bonding behaviour of ultra fine grained copper and Cu–Cr–Zr alloy using ECAP

(2012) P.K. Jayakumar et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Severe plastic deformation of commercial purity aluminum by rotary swaging: Microstructure evolution and mechanical properties

(2012) Mustafa A. Abdulstaar et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Ultrafine grains and the Hall–Petch relationship in an Al–Mg–Si alloy processed by high-pressure torsion

(2011) Aicha Loucif et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure evolution and deformation behavior of ultrafine-grained Al–Zn–Mg alloys with fine η′ precipitates

(2010) S. Zhang et al.   ACTA MATERIALIA

Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed

(2009) Naoya Kamikawa et al.   ACTA MATERIALIA

Increasing the ductility of ultrafine-grained copper alloy by introducing fine precipitates

(2008) N TAKATA et al.   SCRIPTA MATERIALIA