Evolution of dislocation and stacking-fault densities for a Cu-0.7Cr-0.07Zr alloy during cryogenic tensile test: An in-situ synchrotron X-ray diffraction analysis

Slow strain rate tensile tests on notched specimens of as-cast pure Cu and Cu–Fe–Co alloys

(2020) Kaixuan Chen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Thermal-hydraulic analysis for first wall and thermal shield of Divertor Tokamak test facility

(2019) Fabio Maviglia et al.   FUSION ENGINEERING AND DESIGN

Pressed copper and gold-plated copper contacts at low temperatures – A review of thermal contact resistance

(2019) R.C. Dhuley   CRYOGENICS

In Situ X-Ray Diffraction Analysis of Face-Centered Cubic Metals Deformed at Room and Cryogenic Temperatures

(2019) Marcel Tadashi Izumi et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Experimental Investigation of Flat Plate Cryogenic Oscillating Heat Pipe

(2019) Vivek Patel et al.   JOURNAL OF LOW TEMPERATURE PHYSICS

In situ analysis of cryogenic strain of AISI 316L stainless steel using synchrotron radiation

(2019) Maicon Rogerio Crivoi et al.   CRYOGENICS

Effect of cryogenic rolling on the microstructural evolution and mechanical properties of pure copper sheet

(2019) X.B. Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The influence of Cryo-ECAP and aging on the microstructure and mechanical behavior of AA6061 Al alloy

(2019) Danielle Cristina Camilo Magalhães et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

In-situ TEM study of the dynamic interactions between dislocations and precipitates in a Cu-Cr-Zr alloy

(2018) Jiabin Liu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Improved compromise between the electrical conductivity and hardness of the thermo-mechanically treated CuCrZr alloy

(2018) Mariusz Kulczyk et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Numerical simulation of cryogenic cyclic closed-die forging of Cu: hardness distribution, strain maps and microstructural stability

(2018) Danielle Cristina Camilo Magalhães et al.   Journal of Materials Research and Technology-JMR&T

Modified Kocks–Mecking–Estrin Model to Account Nonlinear Strain Hardening

(2018) Krishnaswamy Hariharan et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

The phase transformation and strengthening of a Cu-0.71 wt% Cr alloy

(2017) Lijun Peng et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The microstructure evolution and properties of a Cu–Cr–Ag alloy during thermal-mechanical treatment

(2017) Yue Liu et al.   JOURNAL OF MATERIALS RESEARCH

Plastic deformation of FCC alloys at cryogenic temperature: the effect of stacking-fault energy on microstructure and tensile behaviour

(2017) Danielle Cristina Camilo Magalhães et al.   JOURNAL OF MATERIALS SCIENCE

XRD and EBSD analysis of anisotropic microstructure development in cold rolled F138 stainless steel

(2017) N.S. De Vincentis et al.   MATERIALS CHARACTERIZATION

Study of Cryogenic Rolling of FCC Metals with Different Stacking Fault Energies

(2017) Milene Yumi Maeda et al.   Materials Research-Ibero-american Journal of Materials

A high strength and high electrical conductivity Cu-Cr-Zr alloy fabricated by cryorolling and intermediate aging treatment

(2017) Shaojian Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Phase transformation behaviors and properties of a high strength Cu-Ni-Si alloy

(2017) Qian Lei et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Thermal stability of Cu-Cr-Zr alloy processed by equal-channel angular pressing

(2016) Khadidja Abib et al.   MATERIALS CHARACTERIZATION

Thermal stability of electrical and mechanical properties of cryo-drawn Cu and CuZr wires

(2016) A. Kauffmann et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Grain refinement kinetics and strengthening mechanisms in Cu–0.3Cr–0.5Zr alloy subjected to intense plastic deformation

(2016) A.P. Zhilyaev et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Evaluation of microstructure anisotropy on room and medium temperature ECAP deformed F138 steel

(2015) N.S. De Vincentis et al.   MATERIALS CHARACTERIZATION

In situ X-ray diffraction analysis of strain-induced transformations in Fe- and Co-base hardfacing alloys

(2015) R.T. Smith et al.   SCRIPTA MATERIALIA

Microscopic mechanisms contributing to the synchronous improvement of strength and plasticity (SISP) for TWIP copper alloys

(2015) R. Liu et al.   Scientific Reports

Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures

(2014) Z. Wu et al.   ACTA MATERIALIA

Electrical Conductance of Bolted Copper Joints for Cryogenic Applications

(2014) F. Blondelle et al.   JOURNAL OF LOW TEMPERATURE PHYSICS

Twinning Induced Plasticity and Work Hardening Behavior of Aged Cu–Ni–Si Alloy

(2014) Akiyoshi Araki et al.   MATERIALS TRANSACTIONS

The influence of strain rate, deformation temperature and stacking fault energy on the mechanical properties of Cu alloys

(2013) Y.L. Gong et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Grain size effect on strain hardening in twinning-induced plasticity steels

(2012) I. Gutierrez-Urrutia et al.   SCRIPTA MATERIALIA

High-pressure torsion of pure metals: Influence of atomic bond parameters and stacking fault energy on grain size and correlation with hardness

(2011) Kaveh Edalati et al.   ACTA MATERIALIA

Characterization and Prediction of Flow Behavior in High-Manganese Twinning Induced Plasticity Steels: Part I. Mechanism Maps and Work-Hardening Behavior

(2011) A. Saeed-Akbari et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Strain-hardening of twinning-induced plasticity steels

(2011) O. Bouaziz   SCRIPTA MATERIALIA

Microstructural response of pure copper to cryogenic rolling

(2010) T. Konkova et al.   ACTA MATERIALIA

Microstructure instability in cryogenically deformed copper

(2010) T. Konkova et al.   SCRIPTA MATERIALIA

Microstructural evolution and mechanical properties of Cu–Al alloys subjected to equal channel angular pressing

(2009) S. Qu et al.   ACTA MATERIALIA

Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels

(2007) O. Bouaziz et al.   SCRIPTA MATERIALIA