Microstructure tailoring of Al0.5CoCrFeMnNi to achieve high strength and high uniform strain using severe plastic deformation and an annealing treatment

Operation of solute-drag creep in an AlCoCrFeMnNi high-entropy alloy and enhanced hot workability

(2020) H.T. Jeong et al.   JOURNAL OF ALLOYS AND COMPOUNDS

CoCrFeMnNi high-entropy alloys reinforced with Laves phase by adding Nb and Ti elements

(2019) Gang Qin et al.   JOURNAL OF MATERIALS RESEARCH

Fabrication of a thin open-cell Ni foam sheet with a high specific strength and moderate porosity using severe plastic deformation via differential speed rolling

(2019) H.T. Jeong et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructural evolution, electrochemical and corrosion properties of Al CoCrFeNiTi high entropy alloys

(2019) Y. Qiu et al.   MATERIALS & DESIGN

Grain size and temperature effect on the tensile behavior and deformation mechanisms of non-equiatomic Fe41Mn25Ni24Co8Cr2 high entropy alloy

(2019) H.T. Jeong et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Effect of annealing heat treatment on microstructural evolution and tensile behavior of Al 0.5 CoCrFeMnNi high-entropy alloy

(2018) Jeong Min Park et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructures and mechanical properties of the non-equiatomic FeMnNiCoCr high entropy alloy processed by differential speed rolling

(2018) H.T. Jeong et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Transition of twinning behavior in CoCrFeMnNi high entropy alloy with grain refinement

(2018) S.J. Sun et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of grain size on the tensile behavior of V10Cr15Mn5Fe35Co10Ni25 high entropy alloy

(2018) Peyman Asghari-Rad et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Significant strengthening in superlight Al-Mg alloy with an exceptionally large amount of Mg (13 wt%) after cold rolling

(2018) D.H. Jang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Analysis of the micro and substructural evolution during severe plastic deformation of ARMCO iron and consequences in mechanical properties

(2018) Jairo Alberto Muñoz et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Enhancement of strength-ductility trade-off in a high-entropy alloy through a heterogeneous structure

(2018) S.W. Wu et al.   ACTA MATERIALIA

Strengthening FCC-CoCrFeMnNi high entropy alloys by Mo addition

(2018) Gang Qin et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Severe plastic deformation driven nanostructure and phase evolution in a Al 0.5 CoCrFeMnNi dual phase high entropy alloy

(2017) T.S. Reddy et al.   INTERMETALLICS

The phase stability of equiatomic CoCrFeMnNi high-entropy alloy: Comparison between experiment and calculation results

(2017) Nokeun Park et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and properties of a CoCrFeNiMn high-entropy alloy processed by equal-channel angular pressing

(2017) Hamed Shahmir et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Trade-off between tensile property and formability by partial recrystallization of CrMnFeCoNi high-entropy alloy

(2017) Jae Wung Bae et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Enhanced strength and ductility of bulk CoCrFeMnNi high entropy alloy having fully recrystallized ultrafine-grained structure

(2017) S.J. Sun et al.   MATERIALS & DESIGN

Effects of grain size and dislocation density on strain hardening behavior of ultrafine grained AA1050 processed by accumulative roll bonding

(2016) S.O. Gashti et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of annealing on mechanical properties of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion

(2016) Hamed Shahmir et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Flow stress and work-hardening behaviour of Al–Mg binary alloys

(2015) M. Jobba et al.   INTERNATIONAL JOURNAL OF PLASTICITY

A fracture-resistant high-entropy alloy for cryogenic applications

(2014) B. Gludovatz et al.   SCIENCE

A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys

(2014) Yiping Lu et al.   Scientific Reports

The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy

(2013) F. Otto et al.   ACTA MATERIALIA

Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system

(2013) J.Y. He et al.   ACTA MATERIALIA

Experimental microindentation of pure copper subjected to severe plastic deformation by combined tension–torsion

(2013) Chengpeng Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions

(2013) Taku Sakai et al.   PROGRESS IN MATERIALS SCIENCE

The effect of silicon on the strengthening and work hardening of aluminum at room temperature

(2012) Qinglong Zhao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy

(2012) W.H. Liu et al.   SCRIPTA MATERIALIA

Application of EBSD technique to ultrafine grained and nanostructured materials processed by severe plastic deformation: Sample preparation, parameters optimization and analysis

(2012) Yong-jun CHEN et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Microstructure and mechanical properties of pure Ti processed by high-ratio differential speed rolling at room temperature

(2009) W.J. Kim et al.   SCRIPTA MATERIALIA

Continuous dynamic recrystallization during the transient severe deformation of aluminum alloy 7475

(2008) T. Sakai et al.   ACTA MATERIALIA

Atomic packing efficiency and phase transition in a high entropy alloy

(2008) F.J. Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Mechanical properties and microstructure of ultra fine-grained copper prepared by a high-speed-ratio differential speed rolling

(2008) W.J. Kim et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of WC content on the microstructure and mechanical properties of (Ti,W)(C, N)–Co cermets

(2007) Yan Li et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS