Additive manufacturing – A review of hot deformation behavior and constitutive modeling of flow stress
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Additive manufacturing – A review of hot deformation behavior and constitutive modeling of flow stress
Authors
Keywords
Additive manufacturing, Hot deformation, Mechanical properties, Constitutive analysis
Journal
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
Volume 26, Issue 3, Pages 100992
Publisher
Elsevier BV
Online
2022-03-10
DOI
10.1016/j.cossms.2022.100992
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Using convolutional neural networks to classify melt pools in a pulsed selective laser melting process
- (2022) Wei Xing et al. Journal of Manufacturing Processes
- Improvement of mechanical properties of in situ Mg-Si composites via Cu addition and hot working
- (2022) Milad Maleki et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A review of hot deformation behavior and constitutive models to predict flow stress of high-entropy alloys
- (2022) Zeinab Savaedi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Superplasticity of bulk metallic glasses (BMGs): A review
- (2022) Zeinab Savaedi et al. JOURNAL OF NON-CRYSTALLINE SOLIDS
- Recent advances in the kinetics of normal/abnormal grain growth: a review
- (2021) Fateme Najafkhani et al. Archives of Civil and Mechanical Engineering
- Thermomechanical and thermodynamic behavior of deformed austenite in four different steel grades
- (2021) Clodualdo Aranas et al. Journal of Materials Research and Technology-JMR&T
- Powder-based laser hybrid additive manufacturing of metals: a review
- (2021) Amaia Jiménez et al. The International Journal of Advanced Manufacturing Technology
- Microstructure and constitutive model for flow behavior of AlSi10Mg by Selective Laser Melting
- (2021) Shi Dai et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Review on Dynamic Recrystallization of Martensitic Stainless Steels during Hot Deformation: Part I—Experimental Study
- (2021) Hamed Aghajani Derazkola et al. Metals
- Enhancing the Properties of Aluminum Alloys Fabricated Using Wire + Arc Additive Manufacturing Technique - A Review
- (2021) M.M. Tawfik et al. Journal of Materials Research and Technology-JMR&T
- Hot deformation induced microstructural evolution in local-heterogeneous wire + arc additive manufactured 2219 Al alloy
- (2021) Yinghui Zhou et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure evolution and a unified constitutive model for a Ti-55511 alloy deformed in β region
- (2021) Yu-Qiang Jiang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effects of Post-processing on the Surface Finish, Porosity, Residual Stresses, and Fatigue Performance of Additive Manufactured Metals: A Review
- (2021) Chang Ye et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- High strain rate superplasticity via friction stir processing (FSP): A review
- (2021) Hamed Mirzadeh MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of microalloying by Ca on the microstructure and mechanical properties of as-cast and wrought Mg–Mg2Si composites
- (2021) Mehrab Lotfpour et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The influence of microstructural anisotropy on the hot deformation of wire arc additive manufactured (WAAM) Inconel 718
- (2021) Bo Lan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A Comprehensive Overview on the Latest Progress in the Additive Manufacturing of Metal Matrix Composites: Potential, Challenges, and Feasible Solutions
- (2021) Mehran Dadkhah et al. Acta Metallurgica Sinica-English Letters
- Review of Aluminum Alloy Development for Wire Arc Additive Manufacturing
- (2021) Geir Langelandsvik et al. Materials
- Additive Manufacturing of Bulk Metallic Glasses—Process, Challenges and Properties: A Review
- (2021) Navid Sohrabi et al. Metals
- Superplasticity of high-entropy alloys: a review
- (2021) Reza Motallebi et al. Archives of Civil and Mechanical Engineering
- Optimization of hybrid manufacturing process combining forging and wire-arc additive manufactured Ti-6Al-4V through hot deformation characterization
- (2021) A.K. Maurya et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Physically based constitutive modeling for Ti17 alloy with original basketweave microstructure in β forging: A comparison of three approaches
- (2021) Cuiyuan Lu et al. MATERIALS CHARACTERIZATION
- A unified dislocation density-based model for an aged polycrystalline Ni-based superalloy considering the coupled effects of complicate deformation mechanisms and initial δ phase
- (2021) Zi-Jian Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Constitutive modeling of the hot deformation behavior of CoCrFeMnNi high-entropy alloy
- (2021) Christopher Brown et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure Evolution and a Unified Constitutive Model of Ti-55511 Alloy Compressed at Stepped Strain Rates
- (2021) Gang Su et al. Materials
- Hot Deformation Behavior of a Beta Metastable TMZF Alloy: Microstructural and Constitutive Phenomenological Analysis
- (2021) Ana Paula de Bribean Guerra et al. Metals
- A perspective on precipitation-hardening high-entropy alloys fabricated by additive manufacturing
- (2021) Farahnaz Haftlang et al. MATERIALS & DESIGN
- Additive manufacturing of structural ceramics: a historical perspective
- (2021) Joshua S. Pelz et al. Journal of Materials Research and Technology-JMR&T
- Metal additive manufacturing using friction stir engineering: A review on microstructural evolution, tooling and design strategies
- (2021) Sandeep Rathee et al. CIRP Journal of Manufacturing Science and Technology
- Constitutive Modeling of 17-4PH Stainless Steel Sheet at Elevated Temperature and Statistical Optimization
- (2020) Nan Su et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Tailoring the mechanical properties of Mg–Zn magnesium alloy by calcium addition and hot extrusion process
- (2020) Z. Zareian et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Prediction of Hot Deformation Flow Curves of 1.4542 Stainless Steel
- (2020) Z. Sangari Motlagh et al. METALS AND MATERIALS INTERNATIONAL
- Effect of Friction Stir Processing on Microstructural, Mechanical, and Corrosion Properties of Al-Si12 Additive Manufactured Components
- (2020) Ghazal Moeini et al. Metals
- Critical Strain for Dynamic Recrystallisation. The Particular Case of Steels
- (2020) Gonzalo Varela-Castro et al. Metals
- Hot Strip Mill Processing Simulations on a Ti-Mo Microalloyed Steel using Hot Torsion Testing
- (2020) Caleb A. Felker et al. Metals
- Flow stress prediction using hyperbolic-sine Arrhenius constants optimised by simple generalised reduced gradient refinement
- (2020) Michael Oluwatosin Bodunrin Journal of Materials Research and Technology-JMR&T
- The effect of processing parameters on rapid-heating β recrystallization in inter-pass deformed Ti-6Al-4V wire-arc additive manufacturing
- (2020) A.E. Davis et al. MATERIALS CHARACTERIZATION
- Elucidating the effects of microsegregation on the precipitation phenomena in as-cast Nb-bearing superalloy
- (2020) Mohsen Rafiei et al. MATERIALS LETTERS
- Thermal Mechanisms of Grain Refinement in Steels: A Review
- (2020) Zahra Nasiri et al. METALS AND MATERIALS INTERNATIONAL
- Refinement of the grain structure of additive manufactured titanium alloys via epitaxial recrystallization enabled by rapid heat treatment
- (2020) Zhiyi Zou et al. SCRIPTA MATERIALIA
- Significance of artificial neural network analytical models in materials’ performance prediction
- (2020) Phyu Hnin Thike et al. BULLETIN OF MATERIALS SCIENCE
- Effect of thermal deformation on microstructure and properties of TC18 titanium alloy produced by laser additive manufacturing
- (2020) Xiao-dong Li et al. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
- Hybrid manufacturing of components from Ti-6Al-4V by metal forming and wire-arc additive manufacturing
- (2020) M. Bambach et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Temperature sensitivity of mechanical properties and microstructure during moderate temperature deformation of selective laser melted Ti-6Al-4V alloy
- (2020) Jingwen Song et al. MATERIALS CHARACTERIZATION
- Hot deformation behavior of Hastelloy-X preforms built using directed energy deposition based laser additive manufacturing
- (2020) A.N. Jinoop et al. MATERIALS LETTERS
- A dislocation density-based model and processing maps of Ti-55511 alloy with bimodal microstructures during hot compression in α+β region
- (2020) Yi-Wei Xiao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Hot deformation behavior and flow stress modeling of Ti–6Al–4V alloy produced via electron beam melting additive manufacturing technology in single β-phase field
- (2020) Abdollah Saboori et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High-temperature mechanical properties of nickel-based superalloys manufactured by additive manufacturing
- (2020) Zhao GaoLe et al. MATERIALS SCIENCE AND TECHNOLOGY
- Hot Deformation Characteristic and Strain Dependent Constitutive Flow Stress Modelling of Ti + Nb Stabilized Interstitial Free Steel
- (2020) Sumit Ghosh et al. METALS AND MATERIALS INTERNATIONAL
- High-Temperature Mechanical Properties of IN718 Alloy: Comparison of Additive Manufactured and Wrought Samples
- (2020) Trunal Bhujangrao et al. Crystals
- A critical assessment of experimental investigation of dynamic recrystallization of metallic materials
- (2020) H.K. Zhang et al. MATERIALS & DESIGN
- High-performance bulk pure Al prepared through cold spray-friction stir processing composite additive manufacturing
- (2020) Wen Wang et al. Journal of Materials Research and Technology-JMR&T
- Alloys-By-Design: Application to New Superalloys for Additive Manufacturing
- (2020) Yuanbo T. Tang et al. ACTA MATERIALIA
- An Enhanced Johnson–Cook Model for Hot Compressed A356 Aluminum Alloy
- (2020) Xiao-Min Chen et al. ADVANCED ENGINEERING MATERIALS
- Additive manufacturing of steels: a review of achievements and challenges
- (2020) Nima Haghdadi et al. Journal of Materials Science
- Hot deformation behavior and constitutive modelling of low carbon micro-alloyed steel YQ450NQR1 during isothermal compression
- (2020) Kun Dou et al. MECHANICS OF MATERIALS
- A dislocation assisted self-consistent constitutive model for the high-temperature deformation of particulate metal-matrix composite
- (2020) M. Rezayat et al. PHILOSOPHICAL MAGAZINE
- Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
- (2020) A. Heidarzadeh et al. PROGRESS IN MATERIALS SCIENCE
- Study of the Effects of Hot Forging on the Additively Manufactured Stainless Steel Preforms
- (2020) Catalin I. Pruncu et al. Journal of Manufacturing Processes
- Fabrication of a nanostructured high strength steel tube by friction-forging tubular additive manufacturing (FFTAM) technology
- (2020) H. Aghajani Derazkola et al. Journal of Manufacturing Processes
- Friction stir additive manufacturing – An innovative tool to enhance mechanical and microstructural properties
- (2020) Ashish Kumar Srivastava et al. Materials Science and Engineering B-Advanced Functional Solid-State Materials
- Additive friction stir deposition: a deformation processing route to metal additive manufacturing
- (2020) Hang Z. Yu et al. Materials Research Letters
- Deformation-based additive manufacturing of 7075 aluminum with wrought-like mechanical properties
- (2020) Jake K. Yoder et al. MATERIALS & DESIGN
- A comparative study of phenomenological, physically-based and artificial neural network models to predict the Hot flow behavior of API 5CT-L80 steel
- (2020) H. Ahmadi et al. Materials Today Communications
- On the hot deformation behavior of Ti-6Al-4V made by additive manufacturing
- (2020) Markus Bambach et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Correlation of local microstructures and mechanical properties of Al–Zn–Mg–Cu alloy build fabricated via underwater friction stir additive manufacturing
- (2020) Ying Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A study on hot-working as alternative post-processing method for titanium aluminides built by laser powder bed fusion and electron beam melting
- (2020) Irina Sizova et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Additive manufacturing of high entropy alloys: A practical review
- (2020) Ahmad Ostovari Moghaddam et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Avrami Kinetic-Based Constitutive Relationship for Armco-Type Pure Iron in Hot Deformation
- (2019) Yan Zhang et al. Metals
- Local enhancement of the material properties of aluminium sheets by a combination of additive manufacturing and friction stir processing
- (2019) Mounarik Mondal et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- ‘Cold spray +’ as a new hybrid additive manufacturing technology: a literature review
- (2019) Wenya Li et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Microstructure, Mechanical Properties, and Constitutive Models for Ti–6Al–4V Alloy Fabricated by Selective Laser Melting (SLM)
- (2019) Pan Tao et al. Metals
- Hot Flow Curve Description of CuFe2 Alloy via Different Artificial Neural Network Approaches
- (2019) Petr Opěla et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- The high temperature flow behavior of additively manufactured Inconel 625 superalloy
- (2019) H R Abedi et al. Materials Research Express
- Steels in additive manufacturing: A review of their microstructure and properties
- (2019) P. Bajaj et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Aluminum with dispersed nanoparticles by laser additive manufacturing
- (2019) Ting-Chiang Lin et al. Nature Communications
- Tensile and Creep Properties Improvement of Ti-6Al-4V Alloy Specimens Produced by Electron Beam Powder Bed Fusion Additive Manufacturing
- (2019) Placido Aliprandi et al. Metals
- Constitutive modeling of flow stress during hot deformation of Sn–Al–Zn–Cu–Mg multi-principal-element alloy
- (2019) Hasti Khodashenas et al. VACUUM
- Enhanced Ductility of a Fine-Grained Mg-Gd-Al-Zn Magnesium Alloy by Hot Extrusion
- (2018) Bita Pourbahari et al. ADVANCED ENGINEERING MATERIALS
- Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
- (2018) Tuan D. Ngo et al. COMPOSITES PART B-ENGINEERING
- Plausible extension of Anand's model to metals exhibiting dynamic recrystallization and its experimental validation
- (2018) E.S. Puchi-Cabrera et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Physically-based constitutive model for flow behavior of a Ti-22Al-25Nb alloy at high strain rates
- (2018) Ravindranadh Bobbili et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Hot workability and microstructure evolution of the nickel-based superalloy Inconel 718 produced by laser metal deposition
- (2018) Markus Bambach et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Phenomenological Constitutive Modeling of High-Temperature Flow Behavior Incorporating Individual and Coupled Effects of Processing Parameters in Super-austenitic Stainless Steel
- (2018) Swagata Roy et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Hot workability and microstructure evolution of pre-forms for forgings produced by additive manufacturing
- (2018) Irina Sizova et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A modified Johnson-Cook model for FeCoNiCr high entropy alloy over a wide range of strain rates
- (2018) Ravindranadh Bobbili et al. MATERIALS LETTERS
- A modified Johnson-Cook model for 10%Cr steel at elevated temperatures and a wide range of strain rates
- (2018) Jianli He et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- Solidification behavior and Laves phase dissolution during homogenization heat treatment of Inconel 718 superalloy
- (2018) Mohammad Javad Sohrabi et al. VACUUM
- Progress in Additive Manufacturing on New Materials
- (2018) Neng Li et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Phase transformation and constitutive models of a hot compressed TC18 titanium alloy in the α+β regime
- (2018) Y.C. Lin et al. VACUUM
- Developing constitutive equations of flow stress for hot deformation of AZ31 magnesium alloy under compression, torsion, and tension
- (2018) Hamed Mirzadeh International Journal of Material Forming
- Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room- and high-temperature yield strength developed by additive manufacturing
- (2018) Bandar AlMangour et al. COMPOSITES PART B-ENGINEERING
- Friction stir processing of AlSi10Mg parts produced by selective laser melting
- (2018) Ahmed H. Maamoun et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Enhancement of the microstructure and elevated temperature mechanical properties of as-cast Mg‑Al2Ca‑Mg2Ca in-situ composite by hot extrusion
- (2018) F. Khorasani et al. MATERIALS CHARACTERIZATION
- Potentials and strategies of solid-state additive friction-stir manufacturing technology: A critical review
- (2018) F. Khodabakhshi et al. Journal of Manufacturing Processes
- Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting
- (2018) Markus Bambach et al. Journal of Manufacturing Processes
- Additive manufacturing of Ti6Al4V alloy: A review
- (2018) Shunyu Liu et al. MATERIALS & DESIGN
- In-situ Sip/A380 alloy nano/micro composite formation through cold spray additive manufacturing and subsequent hot rolling treatment: Microstructure and mechanical properties
- (2018) Xiang Qiu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A physically-based constitutive model for hot deformation of Ti-10-2-3 alloy
- (2017) Ravindranadh Bobbili et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A comparative study on Johnson-Cook and modified Johnson-Cook constitutive material model to predict the dynamic behavior laser additive manufacturing FeCr alloy
- (2017) Yanhua Zhao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Hot deformation of the extruded Mg–10Li–1Zn alloy: Constitutive analysis and processing maps
- (2017) M. Shalbafi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Constitutive Modeling of Warm Deformation Flow Curves of an Eutectoid Steel
- (2017) H. Rastegari et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Regression based novel constitutive analyses to predict high temperature flow behavior in super austenitic stainless steel
- (2017) K. Arun Babu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Two phenomenological models to predict the single peak flow stress curves up to the peak during hot deformation
- (2017) Soheil Solhjoo et al. MECHANICS OF MATERIALS
- Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys
- (2017) Stéphane Gorsse et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Dynamic recrystallization kinetics in Mg-3Gd-1Zn magnesium alloy during hot deformation
- (2016) Hamed Mirzadeh et al. International Journal of Materials Research
- A Simple Constitutive Model for Prediction of Single-Peak Flow Curves Under Hot Working Conditions
- (2016) Roxana Baktash et al. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
- A simple Zerilli–Armstrong constitutive equation for modeling and prediction of hot deformation flow stress of steels
- (2016) Tina Mirzaie et al. MECHANICS OF MATERIALS
- Multiprocess 3D printing for increasing component functionality
- (2016) E. MacDonald et al. SCIENCE
- Modified Fields–Backofen model for constitutive behavior of as-cast AZ31B magnesium alloy during hot deformation
- (2016) Weitao Jia et al. MATERIALS & DESIGN
- Comparison of the microstructures and mechanical properties of Ti–6Al–4V fabricated by selective laser melting and electron beam melting
- (2016) Xiaoli Zhao et al. MATERIALS & DESIGN
- Quantification of the strengthening effect of rare earth elements during hot deformation of Mg-Gd-Y-Zr magnesium alloy
- (2016) Hamed Mirzadeh Journal of Materials Research and Technology-JMR&T
- Hot compression behavior of GZ31 magnesium alloy
- (2015) M. Roostaei et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Constitutive Description of 7075 Aluminum Alloy During Hot Deformation by Apparent and Physically-Based Approaches
- (2015) Hamed Mirzadeh JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Rate controlling mechanisms during hot deformation of Mg–3Gd–1Zn magnesium alloy: Dislocation glide and climb, dynamic recrystallization, and mechanical twinning
- (2015) H. Mirzadeh et al. MATERIALS & DESIGN
- Quantification of the strengthening effect of reinforcements during hot deformation of aluminum-based composites
- (2015) Hamed Mirzadeh MATERIALS & DESIGN
- Friction stir additive manufacturing for high structural performance through microstructural control in an Mg based WE43 alloy
- (2015) S. Palanivel et al. MATERIALS & DESIGN
- A simple constitutive model for predicting flow stress of medium carbon microalloyed steel during hot deformation
- (2015) Zohreh Akbari et al. MATERIALS & DESIGN
- Constitutive behaviors of magnesium and Mg–Zn–Zr alloy during hot deformation
- (2015) Hamed Mirzadeh MATERIALS CHEMISTRY AND PHYSICS
- Modeling the hot flow behavior of a Fe–22Mn–0.41C–1.6Al–1.4Si TWIP steel microalloyed with Ti, V and Nb
- (2015) I. Mejía et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Hot deformation behavior, dynamic recrystallization, and physically-based constitutive modeling of plain carbon steels
- (2015) Sepideh Saadatkia et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Constitutive modeling and prediction of hot deformation flow stress under dynamic recrystallization conditions
- (2015) Hamed Mirzadeh MECHANICS OF MATERIALS
- A Simplified Approach for Developing Constitutive Equations for Modeling and Prediction of Hot Deformation Flow Stress
- (2015) Hamed Mirzadeh METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Simple physically-based constitutive equations for hot deformation of 2024 and 7075 aluminum alloys
- (2015) Hamed MIRZADEH TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Modeling the hot deformation flow curves of API X65 pipeline steel
- (2014) M. Rakhshkhorshid INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Metal Additive Manufacturing: A Review
- (2014) William E. Frazier JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Abnormal grain growth in AISI 304L stainless steel
- (2014) M. Shirdel et al. MATERIALS CHARACTERIZATION
- Physically based constitutive analysis to predict flow stress of medium carbon and vanadium microalloyed steels
- (2014) Hai-lian Wei et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Constitutive analysis of Mg–Al–Zn magnesium alloys during hot deformation
- (2014) Hamed Mirzadeh MECHANICS OF MATERIALS
- A physically-based constitutive model for a typical nickel-based superalloy
- (2013) Y.C. Lin et al. COMPUTATIONAL MATERIALS SCIENCE
- Artificial neural network modeling to predict the hot deformation behavior of an A356 aluminum alloy
- (2013) N. Haghdadi et al. MATERIALS & DESIGN
- Constitutive equations for high temperature flow stress of TC4-DT alloy incorporating strain, strain rate and temperature
- (2013) Xiaona Peng et al. MATERIALS & DESIGN
- Modelling of the flow behaviour of wrought aluminium alloys at elevated temperatures by a new constitutive equation
- (2013) M. El Mehtedi et al. MATERIALS & DESIGN
- Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations
- (2013) Amir Etaati et al. METALS AND MATERIALS INTERNATIONAL
- Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
- (2013) Taku Sakai et al. PROGRESS IN MATERIALS SCIENCE
- Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
- (2012) Lawrence E. Murr et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- EBSD study of a hot deformed austenitic stainless steel
- (2012) H. Mirzadeh et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Constitutive relationships for hot deformation of austenite
- (2011) Hamed Mirzadeh et al. ACTA MATERIALIA
- A New Approach to Modeling the Flow Curve of Hot Deformed Austenite
- (2011) Xavier Quelennec et al. ISIJ INTERNATIONAL
- A new relationship between the stress multipliers of Garofalo equation for constitutive analysis of hot deformation in modified 9Cr–1Mo (P91) steel
- (2011) C. Phaniraj et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Modeling and Prediction of Hot Deformation Flow Curves
- (2011) Hamed Mirzadeh et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- An overview on constitutive modelling to predict elevated temperature flow behaviour of fast reactor structural materials
- (2011) Dipti Samantaray et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- A combined Johnson–Cook and Zerilli–Armstrong model for hot compressed typical high-strength alloy steel
- (2010) Y.C. Lin et al. COMPUTATIONAL MATERIALS SCIENCE
- Design of Microalloyed Steel Hot Rolling Schedules by Torsion Testing: Average Schedule vs. Real Schedule
- (2010) Jessica Calvo et al. ISIJ INTERNATIONAL
- A Phenomenological Constitutive Equation to Describe Various Flow Stress Behaviors of Materials in Wide Strain Rate and Temperature Regimes
- (2010) Hyunho Shin et al. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
- The rate of dynamic recrystallization in 17-4 PH stainless steel
- (2010) H. Mirzadeh et al. MATERIALS & DESIGN
- A critical review of experimental results and constitutive descriptions for metals and alloys in hot working
- (2010) Y.C. Lin et al. MATERIALS & DESIGN
- A modified Johnson–Cook model for tensile behaviors of typical high-strength alloy steel
- (2010) Y.C. Lin et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Recrystallization mechanism and the relationship between grain size and Zener–Hollomon parameter of Mg–Al–Zn–Ca alloys during hot compression
- (2010) S.W. Xu et al. SCRIPTA MATERIALIA
- A thermo-viscoplastic constitutive model to predict elevated-temperature flow behaviour in a titanium-modified austenitic stainless steel
- (2009) Dipti Samantaray et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Experimental analysis and constitutive modeling for the newly developed 2139-T8 alloy
- (2009) M. Vural et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Extrapolation of flow curves at hot working conditions
- (2009) H. Mirzadeh et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Flow stress prediction at hot working conditions
- (2009) H. Mirzadeh et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Application of neural networks to predict the elevated temperature flow behavior of a low alloy steel
- (2008) Y.C. Lin et al. COMPUTATIONAL MATERIALS SCIENCE
- Effect of δ-ferrite co-existence on hot deformation and recrystallization of austenite
- (2008) A. Dehghan-Manshadi et al. JOURNAL OF MATERIALS SCIENCE
- Constitutive equations to predict high temperature flow stress in a Ti-modified austenitic stainless steel
- (2008) Sumantra Mandal et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Constitutive modeling for elevated temperature flow behavior of 42CrMo steel
- (2007) Y.C. Lin et al. COMPUTATIONAL MATERIALS SCIENCE
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started