A review of hot deformation behavior and constitutive models to predict flow stress of high-entropy alloys
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
A review of hot deformation behavior and constitutive models to predict flow stress of high-entropy alloys
Authors
Keywords
Multi-principal element alloys, Hot deformation, Mechanical properties, Constitutive analysis, Flow stress
Journal
JOURNAL OF ALLOYS AND COMPOUNDS
Volume 903, Issue -, Pages 163964
Publisher
Elsevier BV
Online
2022-01-26
DOI
10.1016/j.jallcom.2022.163964
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Mechanical behavior of high-entropy alloys
- (2021) Weidong Li et al. PROGRESS IN MATERIALS SCIENCE
- Hot deformation behaviors of an ultrafine-grained MoNbTaTiV refractory high-entropy alloy fabricated by powder metallurgy
- (2021) Qing Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Unique hot deformation behavior and microstructure evolution of a dual FCC-phase CoCrCu1.2FeNi high entropy alloy
- (2021) Jufu Jiang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Calculation and construction of deformation mechanism maps and processing maps for CoCrFeMnNi and Al0.5CoCrFeMnNi high-entropy alloys
- (2021) H.T. Jeong et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure evolution and a unified constitutive model for a Ti-55511 alloy deformed in β region
- (2021) Yu-Qiang Jiang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Dynamic recrystallization and hot deformation mechanisms of a eutectic Al0.7CoCrFeMnNi high-entropy alloy
- (2021) H.T. Jeong et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Enhanced mechanical properties of as-cast Mg-Al-Ca magnesium alloys by friction stir processing
- (2021) Zahra Nasiri et al. MATERIALS LETTERS
- Microstructure stability during high temperature deformation of CoCrFeNiTa eutectic high entropy alloy through nano-scale precipitation
- (2021) Naishalkumar Shah et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High strain rate superplasticity via friction stir processing (FSP): A review
- (2021) Hamed Mirzadeh MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Application of atom probe tomography in understanding high entropy alloys: 3D local chemical compositions in atomic scale analysis
- (2021) Rong Hu et al. PROGRESS IN MATERIALS SCIENCE
- Simultaneous deformation twinning and martensitic transformation in CoCrFeMnNi high entropy alloy at high temperatures
- (2021) S. Picak et al. SCRIPTA MATERIALIA
- High-Pressure Torsion for Synthesis of High-Entropy Alloys
- (2021) Kaveh Edalati et al. Metals
- High-temperature compressive behavior and kinetics analysis of Al0.4MnCrCoFeNi high entropy alloy
- (2021) Hamed Kaypour et al. Materials Research Express
- Modified Johnson-Cook constitutive model of metallic materials under a wide range of temperatures and strain rates
- (2021) Yuntian Wang et al. Results in Physics
- Deformation behavior and microstructure evolution of as-cast Ti2ZrMo0.5Nb0.5 high entropy alloy
- (2021) Lijuan Xu et al. Journal of Materials Research and Technology-JMR&T
- Superplasticity of high-entropy alloys: a review
- (2021) Reza Motallebi et al. Archives of Civil and Mechanical Engineering
- Hot compression behaviors and microstructure evolutions of a cast dual-phase NiCoFeCrAl0.7 high-entropy alloy
- (2021) Qiang Wang et al. INTERMETALLICS
- Strain rate dependent deformation behavior of BCC-structured Ti29Zr24Nb23Hf24 high entropy alloy at elevated temperatures
- (2021) Tangqing Cao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Unique deformation behavior and microstructure evolution in high-temperature processing of a low-density TiAlVNb2 refractory high-entropy alloy
- (2021) Z.C. Bai et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Design of ternary high-entropy aluminum alloys (HEAls)
- (2021) Mohammad Asadikiya et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Physically based constitutive modeling for Ti17 alloy with original basketweave microstructure in β forging: A comparison of three approaches
- (2021) Cuiyuan Lu et al. MATERIALS CHARACTERIZATION
- Amorphization, mechano-crystallization, and crystallization kinetics of mechanically alloyed AlFeCuZnTi high-entropy alloys
- (2021) Sara Daryoush et al. MATERIALS LETTERS
- A unified dislocation density-based model for an aged polycrystalline Ni-based superalloy considering the coupled effects of complicate deformation mechanisms and initial δ phase
- (2021) Zi-Jian Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Constitutive modeling of the hot deformation behavior of CoCrFeMnNi high-entropy alloy
- (2021) Christopher Brown et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Deformation-induced grain boundary segregation mediated high-strain rate superplasticity in medium entropy alloy
- (2021) Peyman Asghari-Rad et al. SCRIPTA MATERIALIA
- High-Temperature Deformation Behaviors of the C-Doped and N-Doped High Entropy Alloys
- (2021) Hailong Yi et al. Metals
- Hot Deformation Behavior of a Beta Metastable TMZF Alloy: Microstructural and Constitutive Phenomenological Analysis
- (2021) Ana Paula de Bribean Guerra et al. Metals
- Post fabrication thermomechanical processing of additive manufactured metals: A review
- (2021) Shawkat Imam Shakil et al. Journal of Manufacturing Processes
- A review on metallurgical aspects of laser additive manufacturing (LAM): Stainless steels, nickel superalloys, and titanium alloys
- (2021) Kh. Moeinfar et al. Journal of Materials Research and Technology-JMR&T
- Micromechanical modelling of work hardening for coupling microstructure evolution, dynamic recovery and recrystallization: application to high entropy alloys
- (2020) Xu He et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- High temperature deformation and dynamic recrystallization behavior of AlCrCuFeNi high entropy alloy
- (2020) Xin Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Constitutive modelling of hot deformation behaviour of a CoCrFeMnNi high-entropy alloy
- (2020) Madan Patnamsetty et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Critical Strain for Dynamic Recrystallisation. The Particular Case of Steels
- (2020) Gonzalo Varela-Castro et al. Metals
- High temperature deformation mechanism and microstructural evolution of relatively lightweight AlCoCrFeNi high entropy alloy
- (2020) Quanwei Tian et al. INTERMETALLICS
- A multi-phase CrMnFeCoNiAl0.75 high-entropy alloy with high strength at intermediate temperature
- (2020) Lijing Lin et al. INTERMETALLICS
- Operation of solute-drag creep in an AlCoCrFeMnNi high-entropy alloy and enhanced hot workability
- (2020) H.T. Jeong et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Single-phase high-entropy alloys – A critical update
- (2020) Walter Steurer MATERIALS CHARACTERIZATION
- Thermal Mechanisms of Grain Refinement in Steels: A Review
- (2020) Zahra Nasiri et al. METALS AND MATERIALS INTERNATIONAL
- Ultrahigh high-strain-rate superplasticity in a nanostructured high-entropy alloy
- (2020) Nhung Thi-Cam Nguyen et al. Nature Communications
- High-rate superplasticity in an equiatomic medium-entropy VCoNi alloy enabled through dynamic recrystallization of a duplex microstructure of ordered phases
- (2020) Seok Su Sohn et al. ACTA MATERIALIA
- Texture formation in face-centered cubic high-entropy alloys
- (2020) G. Dan Sathiaraj et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Dynamic recrystallization in AlXCoCrFeNi duplex high entropy alloys
- (2020) N. Haghdadi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Processing map for controlling microstructure and unraveling various deformation mechanisms during hot working of CoCrFeMnNi high entropy alloy
- (2020) Madan Patnamsetty et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A dislocation density-based model and processing maps of Ti-55511 alloy with bimodal microstructures during hot compression in α+β region
- (2020) Yi-Wei Xiao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Hot deformation behavior and flow stress modeling of Ti–6Al–4V alloy produced via electron beam melting additive manufacturing technology in single β-phase field
- (2020) Abdollah Saboori et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- CoCrFeNiMn high entropy alloy microstructure and mechanical properties after severe cold shape rolling and annealing
- (2020) Mohammad Sajad Mehranpour et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High-entropy alloys with heterogeneous microstructure: Processing and mechanical properties
- (2020) Praveen Sathiyamoorthi et al. PROGRESS IN MATERIALS SCIENCE
- A critical assessment of experimental investigation of dynamic recrystallization of metallic materials
- (2020) H.K. Zhang et al. MATERIALS & DESIGN
- An Enhanced Johnson–Cook Model for Hot Compressed A356 Aluminum Alloy
- (2020) Xiao-Min Chen et al. ADVANCED ENGINEERING MATERIALS
- Deformation-induced martensite in austenitic stainless steels: A review
- (2020) Mohammad Javad Sohrabi et al. Archives of Civil and Mechanical Engineering
- Hot compression deformation behavior and processing maps of ATI 718Plus superalloy
- (2020) Jianbo Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- An assessment of the thermal stability of refractory high entropy superalloys
- (2020) Tamsin E. Whitfield et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Influence of Process Parameters on Microstructure Evolution During Hot Deformation of a Eutectic High-Entropy Alloy (EHEA)
- (2020) M. Zaid Ahmed et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
- (2020) A. Heidarzadeh et al. PROGRESS IN MATERIALS SCIENCE
- Functional properties and promising applications of high entropy alloys
- (2020) Xuehui Yan et al. SCRIPTA MATERIALIA
- Effect of the primary O phase on thermal deformation behavior of a Ti2AlNb-based alloy
- (2020) Hongyu Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure and high-temperature deformation behavior of FeCoNiMnV high entropy alloy
- (2020) F. Alijani et al. MATERIALS CHEMISTRY AND PHYSICS
- Hot deformation behavior and processing map of a Sn0.5CoCrFeMnNi high entropy alloy with dual phases
- (2020) H.T. Jeong et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On the low-cycle fatigue response of CoCrNiFeMn high entropy alloy with ultra-fine grain structure
- (2020) S. Picak et al. ACTA MATERIALIA
- Variation of activation energy determined by a modified Arrhenius approach: Roles of dynamic recrystallization on the hot deformation of Ni-based superalloy
- (2020) Peiru Yang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Recent advances on environmental corrosion behavior and mechanism of high-entropy alloys
- (2020) Yu Fu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Hot deformation behavior of the high-entropy alloy CoCuFeMnNi
- (2019) Natasha Prasad et al. JOURNAL OF MATERIALS RESEARCH
- High-temperature deformation mechanisms and processing maps of equiatomic CoCrFeMnNi high-entropy alloy
- (2019) H.T. Jeong et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Constitutive analysis of wrought Mg-Gd magnesium alloys during hot compression at elevated temperatures
- (2019) Mohammad Hossein Barezban et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Hot Flow Curve Description of CuFe2 Alloy via Different Artificial Neural Network Approaches
- (2019) Petr Opěla et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Development of a large size FCC high-entropy alloy with excellent mechanical properties
- (2019) K. Tang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Ambient- and elevated-temperature strengthening by Al3Zr-Nanoprecipitates and Al3Ni-Microfibers in a cast Al-2.9Ni-0.11Zr-0.02Si-0.005Er (at.%) alloy
- (2019) Richard A. Michi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The Contribution of Severe Plastic Deformation to Research on Superplasticity
- (2019) Megumi Kawasaki et al. MATERIALS TRANSACTIONS
- The effect of Al to high-temperature deformation mechanisms and processing maps of Al0.5CoCrFeMnNi high entropy alloy
- (2019) W.J. Kim et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Unique high-temperature deformation dominated by grain boundary sliding in heterogeneous necklace structure formed by dynamic recrystallization in HfNbTaTiZr BCC refractory high entropy alloy
- (2019) Rajeshwar R. Eleti et al. ACTA MATERIALIA
- Enhanced mechanical properties of carbon-doped FeNiMnAlCr high entropy alloy via hot-rolling
- (2019) Margaret Wu et al. MATERIALS CHARACTERIZATION
- An investigation into the dynamic recrystallization behavior of a non-equiatomic high entropy alloy
- (2019) M. Kahnooji et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Constitutive modeling of flow stress during hot deformation of Sn–Al–Zn–Cu–Mg multi-principal-element alloy
- (2019) Hasti Khodashenas et al. VACUUM
- Hot workability of Co–Fe–Mn–Ni–Ti eutectic high entropy alloy
- (2019) Reliance Jain et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Precipitation behavior during hot deformation of powder metallurgy Ti-Nb-Ta-Zr-Al high entropy alloys
- (2018) Yuankui Cao et al. INTERMETALLICS
- Plausible extension of Anand's model to metals exhibiting dynamic recrystallization and its experimental validation
- (2018) E.S. Puchi-Cabrera et al. INTERNATIONAL JOURNAL OF PLASTICITY
- High temperature deformation behavior of carbon-containing FeCoCrNiMn high entropy alloy
- (2018) Jianbo Li et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Physically-based constitutive model for flow behavior of a Ti-22Al-25Nb alloy at high strain rates
- (2018) Ravindranadh Bobbili et al. JOURNAL OF ALLOYS AND COMPOUNDS
- High-temperature tensile deformation behavior of hot rolled CrMnFeCoNi high-entropy alloy
- (2018) Min Ji Jang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A review on fundamental of high entropy alloys with promising high–temperature properties
- (2018) Jian Chen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Hot deformation behavior of CoCrFeMnNi FCC high entropy alloy
- (2018) Rajeshwar R. Eleti et al. MATERIALS CHEMISTRY AND PHYSICS
- A modified Johnson-Cook model for FeCoNiCr high entropy alloy over a wide range of strain rates
- (2018) Ravindranadh Bobbili et al. MATERIALS LETTERS
- Deformation mechanism during high-temperature tensile test in an eutectic high-entropy alloy AlCoCrFeNi 2.1
- (2018) Yaoli Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanical properties of a hot deformed Al-Mg 2 Si in-situ composite
- (2018) Rashadoddin Zamani et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A new grain orientation spread approach to analyze the dynamic recrystallization behavior of a cast-homogenized Mg-Zn-Zr alloy using electron backscattered diffraction
- (2018) A. Hadadzadeh et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of a minor titanium addition on the superplastic properties of a CoCrFeNiMn high-entropy alloy processed by high-pressure torsion
- (2018) Hamed Shahmir et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The constitutive model and threshold stress for characterizing the deformation mechanism of Al 0.3 CoCrFeNi high entropy alloy
- (2018) Y. Tong et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Developing constitutive equations of flow stress for hot deformation of AZ31 magnesium alloy under compression, torsion, and tension
- (2018) Hamed Mirzadeh International Journal of Material Forming
- Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys
- (2018) Zezhou Li et al. PROGRESS IN MATERIALS SCIENCE
- Dynamic recrystallization behaviour of AlxCoCrFeNi high entropy alloys during high-temperature plane strain compression
- (2018) Murugesan Annasamy et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Towards heterogeneous AlxCoCrFeNi high entropy alloy via friction stir processing
- (2018) Tianhao Wang et al. MATERIALS LETTERS
- Interstitial equiatomic CoCrFeMnNi high-entropy alloys: carbon content, microstructure, and compositional homogeneity effects on deformation behavior
- (2018) Zhiming Li ACTA MATERIALIA
- Hot deformation behavior of Ti-6Al-4V alloy: Effect of initial microstructure
- (2017) Z.X. Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A physically-based constitutive model for hot deformation of Ti-10-2-3 alloy
- (2017) Ravindranadh Bobbili et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Hot deformation of the extruded Mg–10Li–1Zn alloy: Constitutive analysis and processing maps
- (2017) M. Shalbafi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Constitutive Modeling of Warm Deformation Flow Curves of an Eutectoid Steel
- (2017) H. Rastegari et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Elucidating the effect of intermetallic compounds on the behavior of Mg–Gd–Al–Zn magnesium alloys at elevated temperatures
- (2017) Bita Pourbahari et al. JOURNAL OF MATERIALS RESEARCH
- Influence of compressive strain on the microstructural evolution of an AlCoCrFeNi high entropy alloy
- (2017) Kwang Seok Lee et al. MATERIALS CHARACTERIZATION
- Regression based novel constitutive analyses to predict high temperature flow behavior in super austenitic stainless steel
- (2017) K. Arun Babu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Flow behavior and microstructures of powder metallurgical CrFeCoNiMo0.2 high entropy alloy during high temperature deformation
- (2017) Jiawen Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A New Stability Criterion for the Hot Deformation Behavior of Materials: Application to the AZ31 Magnesium Alloy
- (2017) Ignacio Rieiro et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Dynamic deformation behaviors and constitutive relations of an AlCoCr 1.5 Fe 1.5 NiTi 0.5 high-entropy alloy
- (2017) T.W. Zhang et al. SCRIPTA MATERIALIA
- Superplastic-like flow in a fine-grained equiatomic CoCrFeMnNi high-entropy alloy
- (2017) S. R. Reddy et al. Materials Research Letters
- Enhanced strength and ductility in a friction stir processing engineered dual phase high entropy alloy
- (2017) S. S. Nene et al. Scientific Reports
- Dynamic recrystallization kinetics in Mg-3Gd-1Zn magnesium alloy during hot deformation
- (2016) Hamed Mirzadeh et al. International Journal of Materials Research
- A simple Zerilli–Armstrong constitutive equation for modeling and prediction of hot deformation flow stress of steels
- (2016) Tina Mirzaie et al. MECHANICS OF MATERIALS
- Hot Deformation Behavior of As-Cast and Homogenized Al0.5CoCrFeNi High Entropy Alloys
- (2016) Yu Zhang et al. Metals
- Quantification of the strengthening effect of rare earth elements during hot deformation of Mg-Gd-Y-Zr magnesium alloy
- (2016) Hamed Mirzadeh Journal of Materials Research and Technology-JMR&T
- Friction Stir Processing of a High Entropy Alloy Al0.1CoCrFeNi
- (2015) N. Kumar et al. JOM
- Constitutive Description of 7075 Aluminum Alloy During Hot Deformation by Apparent and Physically-Based Approaches
- (2015) Hamed Mirzadeh JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Quantification of the strengthening effect of reinforcements during hot deformation of aluminum-based composites
- (2015) Hamed Mirzadeh MATERIALS & DESIGN
- A simple constitutive model for predicting flow stress of medium carbon microalloyed steel during hot deformation
- (2015) Zohreh Akbari et al. MATERIALS & DESIGN
- Constitutive behaviors of magnesium and Mg–Zn–Zr alloy during hot deformation
- (2015) Hamed Mirzadeh MATERIALS CHEMISTRY AND PHYSICS
- Hot deformation behavior, dynamic recrystallization, and physically-based constitutive modeling of plain carbon steels
- (2015) Sepideh Saadatkia et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High temperature deformation behavior and dynamic recrystallization in CoCrFeNiMn high entropy alloy
- (2015) N.D. Stepanov et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Constitutive modeling and prediction of hot deformation flow stress under dynamic recrystallization conditions
- (2015) Hamed Mirzadeh MECHANICS OF MATERIALS
- A Simplified Approach for Developing Constitutive Equations for Modeling and Prediction of Hot Deformation Flow Stress
- (2015) Hamed Mirzadeh METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Simple physically-based constitutive equations for hot deformation of 2024 and 7075 aluminum alloys
- (2015) Hamed MIRZADEH TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Steady state flow of the FeCoNiCrMn high entropy alloy at elevated temperatures
- (2014) J.Y. He et al. INTERMETALLICS
- Physically based constitutive analysis to predict flow stress of medium carbon and vanadium microalloyed steels
- (2014) Hai-lian Wei et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Constitutive analysis of Mg–Al–Zn magnesium alloys during hot deformation
- (2014) Hamed Mirzadeh MECHANICS OF MATERIALS
- The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy
- (2013) F. Otto et al. ACTA MATERIALIA
- A physically-based constitutive model for a typical nickel-based superalloy
- (2013) Y.C. Lin et al. COMPUTATIONAL MATERIALS SCIENCE
- Phase Composition and Superplastic Behavior of a Wrought AlCoCrCuFeNi High-Entropy Alloy
- (2013) D. G. Shaysultanov et al. JOM
- A New Constitutive Model for the Plastic Flow of Metals at Elevated Temperatures
- (2013) S. Spigarelli et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
- (2013) Taku Sakai et al. PROGRESS IN MATERIALS SCIENCE
- EBSD study of a hot deformed austenitic stainless steel
- (2012) H. Mirzadeh et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Constitutive relationships for hot deformation of austenite
- (2011) Hamed Mirzadeh et al. ACTA MATERIALIA
- A New Approach to Modeling the Flow Curve of Hot Deformed Austenite
- (2011) Xavier Quelennec et al. ISIJ INTERNATIONAL
- Modeling the initiation of dynamic recrystallization using a dynamic recovery model
- (2011) A. Momeni et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A new relationship between the stress multipliers of Garofalo equation for constitutive analysis of hot deformation in modified 9Cr–1Mo (P91) steel
- (2011) C. Phaniraj et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Modeling and Prediction of Hot Deformation Flow Curves
- (2011) Hamed Mirzadeh et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- An overview on constitutive modelling to predict elevated temperature flow behaviour of fast reactor structural materials
- (2011) Dipti Samantaray et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- A combined Johnson–Cook and Zerilli–Armstrong model for hot compressed typical high-strength alloy steel
- (2010) Y.C. Lin et al. COMPUTATIONAL MATERIALS SCIENCE
- The rate of dynamic recrystallization in 17-4 PH stainless steel
- (2010) H. Mirzadeh et al. MATERIALS & DESIGN
- A critical review of experimental results and constitutive descriptions for metals and alloys in hot working
- (2010) Y.C. Lin et al. MATERIALS & DESIGN
- A modified Johnson–Cook model for tensile behaviors of typical high-strength alloy steel
- (2010) Y.C. Lin et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A thermo-viscoplastic constitutive model to predict elevated-temperature flow behaviour in a titanium-modified austenitic stainless steel
- (2009) Dipti Samantaray et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Extrapolation of flow curves at hot working conditions
- (2009) H. Mirzadeh et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Strategies for achieving high strain rate superplasticity in magnesium alloys processed by equal-channel angular pressing
- (2009) Roberto B. Figueiredo et al. SCRIPTA MATERIALIA
- Threshold stress and load partitioning during creep of metal matrix composites
- (2008) Ricardo Fernández et al. ACTA MATERIALIA
- Application of neural networks to predict the elevated temperature flow behavior of a low alloy steel
- (2008) Y.C. Lin et al. COMPUTATIONAL MATERIALS SCIENCE
- Dependency of Recrystallization Mechanism to the Initial Grain Size
- (2008) A. Dehghan-Manshadi et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreDiscover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversation