Microstructure, Mechanical Properties, and Constitutive Models for Ti–6Al–4V Alloy Fabricated by Selective Laser Melting (SLM)

Characterisation and constitutive model of tensile properties of selective laser melted Ti-6Al-4V struts for microlattice structures

(2018) Zhiyong Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Constitutive models for the dynamic behaviour of direct metal laser sintered AlSi10Mg_200C under high strain rate shock loading

(2018) Carter Baxter et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Examination of the twinning activity in additively manufactured Ti-6Al-4V

(2018) H.Z. Zhong et al.   MATERIALS & DESIGN

Tensile behavior of Ti-6Al-4V alloy fabricated by selective laser melting: effects of microstructures and as-built surface quality

(2018) Pan Tao et al.   China Foundry

Numerical simulation for the investment casting process of a large-size titanium alloy thin-wall casing

(2018) Pan Tao et al.   Progress in Natural Science-Materials International

Performance of strut-reinforced Kagome truss core structure under compression fabricated by selective laser melting

(2018) Rinoj Gautam et al.   MATERIALS & DESIGN

Application of mechanical surface finishing processes for roughness reduction and fatigue improvement of additively manufactured Ti-6Al-4V parts

(2017) S. Bagehorn et al.   INTERNATIONAL JOURNAL OF FATIGUE

Hot deformation behavior of Ti-6Al-4V alloy: Effect of initial microstructure

(2017) Z.X. Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Modelling of the Superplastic Deformation of the Near-α Titanium Alloy (Ti-2.5Al-1.8Mn) Using Arrhenius-Type Constitutive Model and Artificial Neural Network

(2017) Ahmed Mosleh et al.   Metals

The improvement on constitutive modeling of Nb-Ti micro alloyed steel by using intelligent algorithms

(2017) Si-Wei Wu et al.   MATERIALS & DESIGN

Additive manufacturing of metals

(2016) Dirk Herzog et al.   ACTA MATERIALIA

Ductility improvement due to martensite α′ decomposition in porous Ti–6Al–4V parts produced by selective laser melting for orthopedic implants

(2016) E. Sallica-Leva et al.   Journal of the Mechanical Behavior of Biomedical Materials

Influence of microstructure on mechanical properties of laser metal wire-deposited Ti-6Al-4V

(2016) Pia Åkerfeldt et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A comparative study of several constitutive models for powder metallurgy tungsten at elevated temperature

(2016) Jin Wang et al.   MATERIALS & DESIGN

Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting

(2016) Jingjing Yang et al.   MATERIALS & DESIGN

Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting

(2015) Galina Kasperovich et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Thermomechanical response of 3D laser-deposited Ti–6Al–4V alloy over a wide range of strain rates and temperatures

(2015) Peng-Hui Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Design and manufacture of customized dental implants by using reverse engineering and selective laser melting technology

(2014) Jianyu Chen et al.   JOURNAL OF PROSTHETIC DENTISTRY

Fatigue performance evaluation of selective laser melted Ti–6Al–4V

(2014) P. Edwards et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V

(2014) M. Simonelli et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Perspectives on Titanium Science and Technology

(2013) Dipankar Banerjee et al.   ACTA MATERIALIA

Evaluation of light-weight AlSi10Mg periodic cellular lattice structures fabricated via direct metal laser sintering

(2013) Chunze Yan et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Constitutive equations for high temperature flow stress of TC4-DT alloy incorporating strain, strain rate and temperature

(2013) Xiaona Peng et al.   MATERIALS & DESIGN

Frequent Occurrence of Discontinuous Dynamic Recrystallization in Ti-6Al-4V Alloy with α′ Martensite Starting Microstructure

(2013) Hiroaki Matsumoto et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Parametric optimization of selective laser melting for forming Ti6Al4V samples by Taguchi method

(2013) Jianfeng Sun et al.   OPTICS AND LASER TECHNOLOGY

Compression deformation behavior of Ti–6Al–4V alloy with cellular structures fabricated by electron beam melting

(2012) X.Y. Cheng et al.   Journal of the Mechanical Behavior of Biomedical Materials

Flow behavior modeling of the 7050 aluminum alloy at elevated temperatures considering the compensation of strain

(2012) Jiang Li et al.   MATERIALS & DESIGN

Prediction of hot compression flow curves of Ti–6Al–4V alloy in α+β phase region

(2011) Mohammad Amin Shafaat et al.   MATERIALS & DESIGN

As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting

(2011) T. Vilaro et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

A study of the microstructural evolution during selective laser melting of Ti–6Al–4V

(2010) Lore Thijs et al.   ACTA MATERIALIA

A critical review of experimental results and constitutive descriptions for metals and alloys in hot working

(2010) Y.C. Lin et al.   MATERIALS & DESIGN

Ductility of a Ti‐6Al‐4V alloy produced by selective laser melting of prealloyed powders

(2010) Luca Facchini et al.   RAPID PROTOTYPING JOURNAL