Microstructural Characteristics and Strengthening Mechanisms of Ferritic–Martensitic Dual-Phase Steels: A Review

A new method to produce dual-phase steel

(2021) Mohammad Reza Roodgari et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Laser welding of dual-phase steels with different silicon contents: Phase evolutions, microstructural observations, mechanical properties, and fracture behavior

(2021) Hossein Mostaan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure-Based Modeling of the Effect of Inclusion on the Bendability of Advanced High Strength Dual-Phase Steels

(2021) Yu Liu et al.   Metals

Processing-Microstructure-Property Correlation for Producing Stretch-Flangeable Grade Dual-Phase Steel

(2021) Ajit Kumar Thakur et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Optimal Design of Hot-Dip Galvanized DP Steels via Artificial Neural Networks and Multi-Objective Genetic Optimization

(2021) Edgar O. Reséndiz-Flores et al.   Metals

Effect of Two Steps Overaging on Mechanical Properties of Tailor Rolled Blank of Dual Phase Steel

(2021) Xianlei Hu et al.   Metals

Consideration of Magnetic Measurements for Characterisation of Ferrite–Martensite Commercial Dual-Phase (DP) Steel and Basis for Optimisation of the Operating Magnetic Field for Open Loop Deployable Sensors

(2021) Mohsen Aghadavoudi Jolfaei et al.   Metals

The fatigue properties, microstructural evolution and crack behaviors of low-carbon carbide-free bainitic steel during low-cycle fatigue

(2021) Qian Zhou et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Stretch-flangeability correlated with hardness distribution and strain-hardenability of constituent phases in dual- and complex-phase steels

(2021) Eunji Song et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Plasticity and structure evolution of ferrite and martensite in DP 1180 during tension and cyclic bending under tension to large strains

(2021) Krishna Yaddanapudi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Understanding ferrite deformation caused by austenite to martensite transformation in dual phase steels

(2021) Vibhor Atreya et al.   SCRIPTA MATERIALIA

Phase Formation during Heating of Amorphous Nickel-Based BNi-3 for Joining of Dissimilar Cobalt-Based Superalloys

(2021) Mojtaba Naalchian et al.   Materials

Effect of Heat Treatment on Microstructure and Creep Behavior of Fe-40Ni-24Cr Alloy

(2021) Maureen Mudang et al.   Applied Sciences-Basel

Compositional heterogeneity in multiphase steels: Characterization and influence on local properties

(2021) Yuling Chang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Micro-laminated and ultrafine-grained dual-phase steel plates generated via intercritical rolling followed by water quenching

(2021) X.J. Shen et al.   Journal of Manufacturing Processes

Abnormal TRIP effect on the work hardening behavior of a quenching and partitioning steel at high strain rate

(2020) M. Wang et al.   ACTA MATERIALIA

A transmission electron microscopy and atom-probe tomography study of martensite morphology and composition in a dual-phase steel

(2020) Dong An et al.   MATERIALS CHARACTERIZATION

Influences of blocky retained austenite on the heat-affected zone softening of dual-phase steels

(2020) D.C. Saha et al.   MATERIALS LETTERS

Experimental and Numerical Investigation of Hydrogen Embrittlement Effect on Microdamage Evolution of Advanced High-Strength Dual-Phase Steel

(2020) M. Asadipoor et al.   METALS AND MATERIALS INTERNATIONAL

Thermal Mechanisms of Grain Refinement in Steels: A Review

(2020) Zahra Nasiri et al.   METALS AND MATERIALS INTERNATIONAL

Effect of Intercritical Annealing on Microstructure and Tensile Properties of an Ultrafine‐Grained Dual‐Phase Low Alloy Steel Containing Titanium

(2020) Masoud Bakhtiari et al.   STEEL RESEARCH INTERNATIONAL

Stability of Retained Austenite in Carbide Free Bainite during the Austempering Temperature and its Influence on Sliding Wear of High Silicon Steel

(2020) Rajan Kumar et al.   Silicon

Metallurgical Effects of Niobium in Dual Phase Steel

(2020) Hardy Mohrbacher et al.   Metals

Effect of Warm Rolling Temperature on the Microstructure and Texture of Microcarbon Dual-Phase (DP) Steel

(2020) Qiangqiang Yuan et al.   Metals

Plastic and fracture behavior of a dual phase steel sheet under quasi-static and dynamic loadings

(2020) Valentin Davaze et al.   ENGINEERING FRACTURE MECHANICS

Optimized Thermomechanical Processing for Fine-Grained Dual-Phase Microstructure Using Deformation-Induced Ferrite Transformation

(2020) S. K. Rajput et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Influence of Intercritical Quenching Temperature on Microstructure, Mechanical Properties and Corrosion Resistance of Dual-Phase Steel

(2020) Xuehui Hao et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Strengthening and ductilization of laminate dual-phase steels with high martensite content

(2020) Bo Gao et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Strain aging characterization and physical modelling of over-aging in dual phase steel

(2020) Mohamed Soliman et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A new 1.2 GPa-strength plain low carbon steel with high ductility obtained by SRDR of martensite and intercritical annealing

(2020) Fatemeh Yaghoobi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and mechanical properties of resistance spot welded dual-phase steels with various silicon contents

(2020) Farzad Badkoobeh et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Transformation-induced plasticity (TRIP) in advanced steels: A review

(2020) Maryam Soleimani et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of Substrate's Heat Treatment on Microstructure and Mechanical Properties TLP Bonding of Dissimilar X-45/FSX-414 Cobalt Based Superalloys

(2020) Mojtaba Naalchian et al.   METALS AND MATERIALS INTERNATIONAL

Microstructural Modifications of Dual‐Phase Steels: An Overview of Recent Progress and Challenges

(2020) Fatemeh Ebrahimi et al.   STEEL RESEARCH INTERNATIONAL

Notch fatigue performance of DP600 steel under different pre-straining paths

(2020) Puja Ghosal et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

A Unified Model for Plasticity in Ferritic, Martensitic and Dual-Phase Steels

(2020) Shuntaro Matsuyama et al.   Metals

Graphene Family Nanomaterial Reinforced Magnesium-Based Matrix Composites for Biomedical Application: A Comprehensive Review

(2020) Somayeh Abazari et al.   Metals

Modeling the Mechanical Response of a Dual-Phase Steel Based on Individual-Phase Tensile Properties

(2020) Paulina Alvarez et al.   Metals

A novel technique for developing a dual-phase steel with a lower strength difference between ferrite and martensite

(2020) Chih-Yuan Chen et al.   Materials Today Communications

Excessive damage increase in dual phase steels under high strain rates and temperatures

(2020) Merve Çobanoğlu et al.   INTERNATIONAL JOURNAL OF DAMAGE MECHANICS

Improved mechanical properties of V-microalloyed dual phase steel by enhancing martensite deformability

(2020) Jingbin Zhang et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Modeling of Bake Hardening Kinetics and Carbon Redistribution in Dual‐Phase Steels

(2020) Yao V. Shan et al.   STEEL RESEARCH INTERNATIONAL

Role of Martensite Structural Characteristics on Corrosion Features in Ni-Advanced Dual-Phase Low-Alloy Steels

(2020) Chao Hai et al.   Acta Metallurgica Sinica-English Letters

Carbon Nanotubes (CNTs)-Reinforced Magnesium-Based Matrix Composites: A Comprehensive Review

(2020) Somayeh Abazari et al.   Materials

Improved work hardening of a medium carbon-TRIP steel by partial decomposition of retained austenite

(2020) X.X. Dong et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

On the local evaluation of the hydrogen susceptibility of cold-formed and heat treated advanced high strength steel (AHSS) sheets

(2020) A. Drexler et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructural effects on fracture toughness of ultra-high strength dual phase sheet steels

(2020) D. Frómeta et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Investigation on micromechanism of ferrite hardening after pre-straining with different strain rates of dual-phase steel

(2020) Yongnan Chen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Strain Hardening Dependence on the Structure in Dual‐Phase Steels

(2020) Mohamed Soliman et al.   STEEL RESEARCH INTERNATIONAL

On the Simultaneous Improving of Strength and Elongation in Dual Phase Steels via Cold Rolling

(2020) Yousef Mazaheri et al.   Metals

Critical Assessment of the Effect of Atmospheric Corrosion Induced Hydrogen on Mechanical Properties of Advanced High Strength Steel

(2020) Darya Rudomilova et al.   Metals

Revisiting the martensite/ferrite interface damage initiation mechanism: The key role of substructure boundary sliding

(2020) L. Liu et al.   ACTA MATERIALIA

Simultaneous enhancement of strength and ductility in ferrite-martensite steel via increasing the martensite fraction

(2020) Fatemeh Yaghoobi et al.   MATERIALS CHEMISTRY AND PHYSICS

Effect of pre-existing martensite within the microstructure of nano bainitic steel on its mechanical properties

(2020) Behzad Avishan et al.   MATERIALS CHEMISTRY AND PHYSICS

An automated morphological classification of ferrite-martensite dual-phase microstructures

(2019) Tanusree Dutta et al.   MEASUREMENT

Fine tuning the mechanical properties of dual phase steel via thermomechanical processing of cold rolling and intercritical annealing

(2019) Sheida Nikkhah et al.   MATERIALS CHEMISTRY AND PHYSICS

Effect of Martensite Content on Failure Behavior of Laser Welded Dual-Phase Steel Joints During Deformation

(2019) Peng-Cheng Huan et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Effects of cold rolling reduction ratio on microstructures and tensile properties of intercritically annealed medium-Mn steels

(2019) Min Tae Kim et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Relationships Between Stretch-Flangeability and Microstructure-Mechanical Properties in Ultra-High-Strength Dual-Phase Steels

(2019) Jae Ik Yoon et al.   METALS AND MATERIALS INTERNATIONAL

Effect of Silicon Content on the Wear Behavior of Low-Carbon Dual-Phase Steels

(2019) Ashkan Nouri et al.   TRIBOLOGY LETTERS

Microstructure Evolution during the Production of Dual Phase and Transformation Induced Plasticity Steels Using Modified Strip Casting Simulated in The Laboratory

(2019) Zhiping Xiong et al.   Metals

Investigation of evolving yield surfaces of dual-phase steels

(2019) Yong Hou et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

High strength-elongation balance in ultrafine grained ferrite-martensite dual phase steels developed by thermomechanical processing

(2019) Yousef Mazaheri et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

In-situ EBSD study of deformation behaviour of 600 MPa grade dual phase steel during uniaxial tensile tests

(2019) Shengci Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Optimization of the Continuous Galvanizing Heat Treatment Process in Ultra-High Strength Dual Phase Steels Using a Multivariate Model

(2019) Costa et al.   Metals

Effect of martensite volume fraction on cyclic plastic deformation behavior of dual phase steel: micromechanics simulation study

(2019) Amit Kumar Rana et al.   Journal of Materials Research and Technology-JMR&T

Influence of pre-straining path on high cycle fatigue performance of DP 600 steel

(2019) Bimal Das et al.   INTERNATIONAL JOURNAL OF FATIGUE

Effect of Heating Rate during Continuous Annealing on Microstructure and Mechanical Properties of High-Strength Dual-Phase Steel

(2019) Y. G. Deng et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Improved Mechanical Properties of Structural Steel via Developing Bimodal Grain Size Distribution and Intercritical Heat Treatment

(2019) Mostafa Najafi et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Friction stir processing of dual phase steel: Microstructural evolution and mechanical properties

(2019) S.M. Aktarer et al.   MATERIALS CHARACTERIZATION

Correlation of ferrite and martensite micromechanical behavior with mechanical properties of ultrafine grained dual phase steels

(2019) Amir Hossein Jahanara et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Relationship between Microstructure and Corrosion Behavior in Dual‐Phase Steels with Various Si Content

(2019) Ashkan Nouri et al.   STEEL RESEARCH INTERNATIONAL

Microstructure‐Based Modeling of Mechanical Properties and Deformation Behavior of DP600 Dual Phase Steel

(2019) Shengci Li et al.   STEEL RESEARCH INTERNATIONAL

Prediction of Bake Hardening Behavior of Selected Advanced High Strength Automotive Steels and Hailstone Failure Discussion

(2019) Mária Mihaliková et al.   Metals

Effect of microstructure quenched around Ac3 point on the damage behavior in 0.087C–1.35Mn steel

(2019) Chengyu Guo et al.   Journal of Materials Research and Technology-JMR&T

Effect of Boron Micro-alloying on Microstructure and Corrosion Behavior of Dual-Phase Steel

(2019) Satendra Kumar et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Phase transformation during friction stir processing of dual-phase 600 steel

(2019) Nikhil Gotawala et al.   JOURNAL OF MATERIALS SCIENCE

The bake hardening mechanism of dual-phase silicon steels under high pre-strain

(2019) Farzad Badkoobeh et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

New Insights into the Microstructural Changes During the Processing of Dual-Phase Steels from Multiresolution Spherical Indentation Stress–Strain Protocols

(2019) Ali Khosravani et al.   Metals

Martensite crystallography and chemistry in dual phase and fully martensitic steels

(2018) C. Du et al.   MATERIALS CHARACTERIZATION

Comparison of microstructural and mechanical properties of friction stir spot welded ultra-high strength dual phase and complex phase steels

(2018) Hrishikesh Das et al.   MATERIALS CHARACTERIZATION

Recrystallization behavior in a low-density high-Mn high-Al austenitic steel undergone thin strip casting process

(2018) Fengqin Ji et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A Study of Redistribution of Silicon in Dual-Phase Silicon Steels

(2018) Ashkan Nouri et al.   METAL SCIENCE AND HEAT TREATMENT

Mechanical Behavior of Two Ferrite–Martensite Dual-Phase Steels over a Broad Range of Strain Rates

(2018) Jiangtao Liang et al.   Metals

The Impact of Strain Heterogeneity and Transformation of Metastable Austenite on Springback Behavior in Quenching and Partitioning Steel

(2018) Yonggang Yang et al.   Metals

On significance of initial microstructure in governing mechanical behavior and fracture of dual-phase steels

(2018) Yong-gang Deng et al.   JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL

Ultrafine grained dual-phase martensite/ferrite steel strengthened and toughened by lamella structure

(2018) Junjie Sun et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and Mechanical Properties of a Cold-Rolled Ultrafine-Grained Dual-Phase Steel

(2018) Zhiyi Pan et al.   Materials

Experimental Determination of Continuous Cooling Transformation (CCT) Diagrams for Dual-Phase Steels from the Intercritical Temperature Range

(2018) Krishna Bräutigam–Matus et al.   Metals

Bayesian approach in predicting mechanical properties of materials: Application to dual phase steels

(2018) Jaimyun Jung et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The effect of Nb on texture evolutions of the ultrafine-grained dual-phase steels fabricated by cold rolling and intercritical annealing

(2017) A. Ghatei Kalashami et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Mutual mechanical effects of ferrite and martensite in a low alloy ferrite-martensite dual phase steel

(2017) A. Ebrahimian et al.   JOURNAL OF ALLOYS AND COMPOUNDS

A lamellar structured ultrafine grain ferrite-martensite dual-phase steel and its resistance to hydrogen embrittlement

(2017) Junjie Sun et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Role of recrystallization and pearlite dissolution in industrial processing of DP590 steels

(2017) Virender Singh et al.   MATERIALS AND MANUFACTURING PROCESSES

Examination of phase transformation kinetics during step quenching of dual phase steels

(2017) H. Ashrafi et al.   MATERIALS CHEMISTRY AND PHYSICS

Micromechanical modeling of fatigue behavior of DP steels

(2017) Ghazal Moeini et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructural evolution and mechanical properties of dual phase steel produced by strip casting

(2017) He-song Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Ferrite channel effect on ductility and strain hardenability of ultra high strength dual phase steel

(2017) Ravi Kumar B. et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A novel and simple technique for development of dual phase steels with excellent ductility

(2017) H. Ashrafi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Influence of microstructure and pre-straining on the bake hardening response for ferrite-martensite dual-phase steels of different grades

(2017) Dengpeng Ji et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Impact of Martensite Spatial Distribution on Quasi-Static and Dynamic Deformation Behavior of Dual-Phase Steel

(2017) Manpreet Singh et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

The Influence of Laser Welding on the Mechanical Properties of Dual Phase and Trip Steels

(2017) Emil Evin et al.   Metals

Reduction of Induced Central Damage in Cold Extrusion of Dual-Phase Steel DP800 Using Double-Pass Dies

(2017) Francisco Amigo et al.   Metals

An Overview of Dual-Phase Steels: Advances in Microstructure-Oriented Processing and Micromechanically Guided Design

(2015) C.C. Tasan et al.   Annual Review of Materials Research

Strengthening Mechanisms of Ultrafine Grained Dual Phase Steels Developed by New Thermomechanical Processing

(2015) Yousef Mazaheri et al.   ISIJ INTERNATIONAL

Effect of martensite volume fraction on low cycle fatigue behaviour of dual phase steels: Experimental and microstructural investigation

(2015) Surajit Kumar Paul et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure refinement of dual-phase steels with 3.5wt% Mn: Influence on plastic and fracture behavior

(2015) Q. Lai et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of martensite morphology and volume fraction on strain hardening and fracture behavior of martensite–ferrite dual phase steel

(2015) Jiecen Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The influence of microstructure and composition on the plastic behaviour of dual-phase steels

(2014) A.-P. Pierman et al.   ACTA MATERIALIA

A method to quantitatively upscale the damage initiation of dual-phase steels under various stress states from microscale to macroscale

(2014) Junhe Lian et al.   COMPUTATIONAL MATERIALS SCIENCE

Study the effect of martensite banding on the failure initiation in dual-phase steel

(2014) A. Ramazani et al.   COMPUTATIONAL MATERIALS SCIENCE

Influence of silicon on the microstructures, mechanical properties and stretch-flangeability of dual phase steels

(2014) Le-yu Zhou et al.   International Journal of Minerals Metallurgy and Materials

Optimal Control of a Cooling Line for Production of Hot Rolled Dual Phase Steel

(2014) Wolfgang Bleck et al.   STEEL RESEARCH INTERNATIONAL

Effect of martensite volume fraction on stress triaxiality and deformation behavior of dual phase steel

(2013) Surajit Kumar Paul   MATERIALS & DESIGN

Quantification of the effect of transformation-induced geometrically necessary dislocations on the flow-curve modelling of dual-phase steels

(2012) A. Ramazani et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Influence of ferrite fraction within martensite matrix on fatigue crack propagation: An experimental verification with dual phase steel

(2012) Roslinda Idris et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Transformation-Induced, Geometrically Necessary, Dislocation-Based Flow Curve Modeling of Dual-Phase Steels: Effect of Grain Size

(2012) Ali Ramazani et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

On the Effect of Manganese on Grain Size Stability and Hardenability in Ultrafine-Grained Ferrite/Martensite Dual-Phase Steels

(2011) Marion Calcagnotto et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Effect of Heating Rate on the Austenite Formation in Low-Carbon High-Strength Steels Annealed in the Intercritical Region

(2011) R. R. Mohanty et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging

(2010) Marion Calcagnotto et al.   ACTA MATERIALIA

Influence of volume fraction of martensite on the work hardening behaviour of two dual-phase steels with high and low silicon contents

(2010) Ashkan Nouri et al.   International Journal of Materials Research

Effects of Silicon Content and Intercritical Annealing on Manganese Partitioning in Dual Phase Steels

(2010) A. Nouri et al.   JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL

Effect of niobium and rolling parameters on the mechanical properties and microstructure of dual phase steels

(2010) H. Niakan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of grain refinement to 1μm on strength and toughness of dual-phase steels

(2010) Marion Calcagnotto et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD

(2010) Marion Calcagnotto et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Influence of martensite morphology on the work-hardening behavior of high strength ferrite–martensite dual-phase steel

(2009) Debdulal Das et al.   JOURNAL OF MATERIALS SCIENCE