Effect of Heat Treatment on Microstructure and Creep Behavior of Fe-40Ni-24Cr Alloy

Effect of Different Precipitation Routes of Fe2Hf Laves Phase on the Creep Rate of 9Cr-Based Ferritic Alloys

(2021) Satoru Kobayashi et al.   Applied Sciences-Basel

Relationship between the microstructure and the heat treatment and creep behavior of Fe–33Ni–19Cr alloy

(2021) Maureen Mudang et al.   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

Thermodynamic Performance and Creep Life Assessment Comparing Hydrogen- and Jet-Fueled Turbofan Aero Engine

(2021) Emmanuel O. Osigwe et al.   Applied Sciences-Basel

Phase Formation during Heating of Amorphous Nickel-Based BNi-3 for Joining of Dissimilar Cobalt-Based Superalloys

(2021) Mojtaba Naalchian et al.   Materials

Comprehensive microstructural investigation during dissimilar transient liquid phase bonding cobalt-based superalloys by BNi-9 amorphous interlayer foil

(2021) Mojtaba Naalchian et al.   Journal of Materials Research and Technology-JMR&T

Temperature effects on deformation substructures and mechanisms of a Ni-based single crystal superalloy

(2021) Qingqing Ding et al.   Applied Materials Today

Effect of Rejuvenation Heat Treatment on the Creep Property and Microstructural Evolution of a Ni-Base Superalloy

(2020) Linning Wang et al.   Applied Sciences-Basel

Dynamic Coercivity of Tempered Ferritic Steel Subjected to Creep-Fatigue for Nondestructive Evaluation by Reversible Permeability

(2020) Chung Seok Kim   Applied Sciences-Basel

The Effect of Long-Term Ageing on the Degradation of the Microstructure the Inconel 740h Alloy

(2020) M. Sroka et al.   ACTA PHYSICA POLONICA A

Microstructure influence on creep properties of heat-resistant austenitic alloys with high aluminum content

(2020) A. Facco et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The formation and evolution of NiAl phase in a fourth generation nickel-based single crystal superalloy

(2020) W. Song et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Creep behaviors of multiphase Ni3Al-based intermetallic alloy after 1000 °C-1000 h long-term aging at intermediate temperatures

(2020) Jing Wu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Influence of heat treatment on the structure evolution and creep deformation behavior of a precipitation hardened B2-(Ni, Fe)Al alloy

(2020) Yu.Yu. Kaplanskii et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Evolution of the microstructure and mechanical properties of HR3C austenitic stainless steel after ageing for up to 30,000 h at 650–750 °C

(2020) A. Zieliński et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of Substrate's Heat Treatment on Microstructure and Mechanical Properties TLP Bonding of Dissimilar X-45/FSX-414 Cobalt Based Superalloys

(2020) Mojtaba Naalchian et al.   METALS AND MATERIALS INTERNATIONAL

Primary Structure and Physical Properties of New Superalloys Co-20Ni-10Al-5Mo-2Nb on Cobalt Matrix

(2020) A. Tomaszewska et al.   ACTA PHYSICA POLONICA A

Exploring the fundamentals of Ni-based superalloy single crystal (SX) alloy design: Chemical composition vs. microstructure

(2020) O.M. Horst et al.   MATERIALS & DESIGN

High-temperature corrosion of an Fe–Ni-based alloy HR6W under various conditions at 750 °C and 810 °C: Effect of the temperature, water vapor, simulated ash and SO2

(2020) Zhiyuan Liang et al.   MATERIALS CHEMISTRY AND PHYSICS

Tailoring the creep properties of second-generation Ni-based single crystal superalloys by composition optimization of Mo, W and Ti

(2020) Jinbin Chen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Creep behavior of Ni–38Cr-3.8Al alloy with lamellar structure formed by discontinuous precipitation

(2019) Yoshihiko Koyanagi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A Review on Laser Powder Bed Fusion of Inconel 625 Nickel-Based Alloy

(2019) Zhihua Tian et al.   Applied Sciences-Basel

Effect of carbon on the microstructure and stress rupture properties of a new Ni-Cr-W-Fe alloy for advanced ultra-supercritical power plants

(2018) Meiqiong Ou et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Crack Propagation Mechanisms for Creep Fatigue: A Consolidated Explanation of Fundamental Behaviours from Initiation to Failure

(2018) Dan Liu et al.   Metals

Microscale modeling of creep deformation and rupture in Nickel-based superalloy IN 617 at high temperature

(2017) Van-Tung Phan et al.   MECHANICS OF MATERIALS

Effects of annealing temperature on microstructure, mechanical properties and corrosion resistance of 30% Cr super ferritic stainless steel

(2016) Li Ma et al.   MATERIALS LETTERS

Phase Investigations Under Steam Oxidation Process at 800 °C for 1000 h of Advanced Steels and Ni-Based Alloys

(2016) T. Dudziak et al.   OXIDATION OF METALS

Measurements of stress fields near a grain boundary: Exploring blocked arrays of dislocations in 3D

(2015) Y. Guo et al.   ACTA MATERIALIA

Creep deformation and rupture behavior of Alloy 617

(2015) Woo-Gon Kim et al.   ENGINEERING FAILURE ANALYSIS

Dynamic behavior and microstructural evolution during moderate to high strain rate hot deformation of a Fe–Ni–Cr alloy (alloy 800H)

(2015) Yu Cao et al.   JOURNAL OF NUCLEAR MATERIALS

Microstructural evolution of a nickel-based superalloy during hot deformation

(2015) Xiao-Min Chen et al.   MATERIALS & DESIGN

Microstructural characterization of dissimilar welds between Incoloy 800H and 321 Austenitic Stainless Steel

(2015) G. Sayiram et al.   MATERIALS CHARACTERIZATION

Dislocation motion in a NI-Fe-based superalloy during creep–rupture beyond 700°C

(2015) F. Sun et al.   MATERIALS LETTERS

Creep properties and deformation mechanism of the containing 4.5Re/3.0Ru single crystal nickel-based superalloy at high temperatures

(2015) Sugui Tian et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The effect of thermo-mechanical processing on grain boundary character distribution in Incoloy 800H/HT

(2015) Hamed Akhiani et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The creep deformation behavior of a single-crystal Co–Al–W-base superalloy at 900°C

(2015) L. Shi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

RESEARCH ON DYNAMIC RECRYSTALLIZATION BEHAVIOR OF INCOLOY 800H

(2015) Yu CAO et al.   ACTA METALLURGICA SINICA

The impact of aging pre-treatment on the hot deformation behavior of alloy 800H at 750°C

(2014) Yu Cao et al.   JOURNAL OF NUCLEAR MATERIALS

Low temperature creep plasticity

(2014) Michael E. Kassner et al.   Journal of Materials Research and Technology-JMR&T

An electron backscattered diffraction study on the dynamic recrystallization behavior of a nickel–chromium alloy (800H) during hot deformation

(2013) Yu Cao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure of Haynes® 282® Superalloy after Vacuum Induction Melting and Investment Casting of Thin-Walled Components

(2013) Hubert Matysiak et al.   Materials

The precipitation strengthening behavior of Cu-rich phase in Nb contained advanced Fe–Cr–Ni type austenitic heat resistant steel for USC power plant application

(2012) Cheng-yu Chi et al.   Progress in Natural Science-Materials International

Microstructure optimization of austenitic Alloy 800H (Fe–21Cr–32Ni)

(2010) L. Tan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Corrosion aspects of Ni–Cr–Fe based and Ni–Cu based steam generator tube materials

(2009) R.S. Dutta   JOURNAL OF NUCLEAR MATERIALS

The effect of grain boundary serration on creep resistance in a wrought nickel-based superalloy

(2009) H.U. Hong et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructural characterization of dissimilar welds between alloy 800 and HP heat-resistant steel

(2008) R. Dehmolaei et al.   MATERIALS CHARACTERIZATION

Microstructural changes and mechanical properties of Incoloy 800 after 15 years service

(2008) R. Dehmolaei et al.   MATERIALS CHARACTERIZATION

Analysis of high-temperature creep deformation in a polycrystalline nickel-base superalloy

(2008) A. Soula et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The influence of test duration and geometry on the creep crack initiation and growth behaviour of 316H steel

(2008) C.M. Davies et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Dislocation mechanics of creep

(2008) W. Blum et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Creep and tensile behaviour of austenitic Fe–Cr–Ni stainless steels

(2008) Raluca Voicu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Slip band formation and mobile dislocation density generation in high rate deformation of single fcc crystals

(2008) Z.Q. Wang et al.   PHILOSOPHICAL MAGAZINE

Growth and adherence of chromia based surface scales on Ni-base alloys in high- and low-pO2 gases

(2007) J. Zurek et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING