Unraveling of Advances in 3D-Printed Polymer-Based Bone Scaffolds

Poly ether ether ketone and its composite powder prepared by thermally induced phase separation for high temperature selective laser sintering

(2021) Yuan Wang et al.   MATERIALS & DESIGN

Printability and mechanical performance of biomedical PDMS-PEEK composites developed for material extrusion

(2021) James A. Smith et al.   Journal of the Mechanical Behavior of Biomedical Materials

3D-printed PEEK implant for mandibular defects repair - a new method

(2021) Jianfeng Kang et al.   Journal of the Mechanical Behavior of Biomedical Materials

Sacrificial mold-assisted 3D printing of stable biocompatible gelatin scaffolds

(2021) Sakthivel Nagarajan et al.   Bioprinting

Bio-inspired hydrogel composed of hyaluronic acid and alginate as a potential bioink for 3D bioprinting of articular cartilage engineering constructs

(2020) Cristina Antich et al.   Acta Biomaterialia

PP in 3D Printing - Technical and Economic Aspects

(2020) Ionel Danut Savu et al.   MATERIALE PLASTICE

Engineering considerations on extrusion-based bioprinting: interactions of material behaviour, mechanical forces and cells in the printing needle

(2020) Julia Emmermacher et al.   Biofabrication

Are Carbon-fiber Implants More Efficacious Than Traditional Metallic Implants for Spine Tumor Surgery?

(2020) Jake M. McDonnell et al.   Clinical Spine Surgery

Fabrication of ceramic bone scaffolds by solvent jetting 3D printing and sintering: Towards load-bearing applications

(2020) Geuntak Lee et al.   Additive Manufacturing

The design, fabrication and evaluation of 3D printed gHNTs/gMgO whiskers/PLLA composite scaffold with honeycomb microstructure for bone tissue engineering

(2020) Kun Liu et al.   COMPOSITES PART B-ENGINEERING

3D printing of titanium-coated gradient composite lattices for lightweight mandibular prosthesis

(2020) Ran Xiao et al.   COMPOSITES PART B-ENGINEERING

Topological optimization of 3D printed bone analog with PEKK for surgical mandibular reconstruction

(2020) Kang-jie Cheng et al.   Journal of the Mechanical Behavior of Biomedical Materials

Materials design for bone-tissue engineering

(2020) Gerry L. Koons et al.   Nature Reviews Materials

Current understanding and challenges in high temperature additive manufacturing of engineering thermoplastic polymers

(2020) Arit Das et al.   Additive Manufacturing

Additive Manufacturing of Material Scaffolds for Bone Regeneration: Toward Application in the Clinics

(2020) Charlotte Garot et al.   ADVANCED FUNCTIONAL MATERIALS

Converting 2D Nanofiber Membranes to 3D Hierarchical Assemblies with Structural and Compositional Gradients Regulates Cell Behavior

(2020) Shixuan Chen et al.   ADVANCED MATERIALS

New insights on the reparative cells in bone regeneration and repair

(2020) Shuo Huang et al.   BIOLOGICAL REVIEWS

Inkjet Bioprinting of Biomaterials

(2020) Xinda Li et al.   CHEMICAL REVIEWS

Fabrication of biocompatible and bioabsorbable polycaprolactone/ magnesium hydroxide 3D printed scaffolds: Degradation and in vitro osteoblasts interactions

(2020) Abdalla Abdal-hay et al.   COMPOSITES PART B-ENGINEERING

Hydroxyapatite/polyetheretherketone nanocomposites for selective laser sintering: Thermal and mechanical performances

(2020) Wenwen Lai et al.   E-POLYMERS

Advances on Bone Substitutes through 3D Bioprinting

(2020) Tullio Genova et al.   INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES

Mechanisms of bone development and repair

(2020) Ankit Salhotra et al.   NATURE REVIEWS MOLECULAR CELL BIOLOGY

3D bioprinting dual-factor releasing and gradient-structured constructs ready to implant for anisotropic cartilage regeneration

(2020) Ye Sun et al.   Science Advances

Numerical Analysis of the Influence of Porosity and Pore Geometry on Functionality of Scaffolds Designated for Orthopedic Regenerative Medicine

(2020) Piotr Prochor et al.   Materials

Biomimetic gelatin/HA biocomposites with effective elastic properties and 3D-structural flexibility using a 3D-printing process

(2020) Dongyun Kim et al.   Additive Manufacturing

Recent Progress in 3D Printing of Elastic and High-Strength Hydrogels for the Treatment of Osteochondral and Cartilage Diseases

(2020) Wenli Dai et al.   Frontiers in Bioengineering and Biotechnology

Porous bone tissue scaffold concept based on shape memory PLA/Fe3O4

(2020) Wei Zhao et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Preparation of high thermal stability gelatin emulsion and its application in 3D printing

(2020) Jie Du et al.   FOOD HYDROCOLLOIDS

Advancing Frontiers in Bone Bioprinting

(2019) Nureddin Ashammakhi et al.   Advanced Healthcare Materials

Design of porous titanium scaffold for complete mandibular reconstruction: The influence of pore architecture parameters

(2019) Abir Dutta et al.   COMPUTERS IN BIOLOGY AND MEDICINE

Controlled Co-delivery of Growth Factors through Layer-by-Layer Assembly of Core–Shell Nanofibers for Improving Bone Regeneration

(2019) Gu Cheng et al.   ACS Nano

Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK

(2019) Peng Wang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Highly porous polycaprolactone scaffolds doped with calcium silicate and dicalcium phosphate dihydrate designed for bone regeneration

(2019) Maria Giovanna Gandolfi et al.   Materials Science & Engineering C-Materials for Biological Applications

Spatially Regulated Multiphenotypic Differentiation of Stem Cells in 3D via Engineered Mechanical Gradient

(2019) Christopher B. Horner et al.   ACS Applied Materials & Interfaces

Recent Progress on 3D‐Printed Polylactic Acid and Its Applications in Bone Repair

(2019) Xibao Chen et al.   ADVANCED ENGINEERING MATERIALS

Applications of chitin and chitosan nanofibers in bone regenerative engineering

(2019) Fenghua Tao et al.   CARBOHYDRATE POLYMERS

Synthesis and characterization of gelatin-PVP polymer composite scaffold for potential application in bone tissue engineering

(2019) Rutusmita Mishra et al.   EUROPEAN POLYMER JOURNAL

Osteogenic differentiation of hMSCs on semi-interpenetrating polymer networks of polyurethane/poly(2‑hydroxyethyl methacrylate)/cellulose nanowhisker scaffolds

(2019) Mohsen Shahrousvand et al.   INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES

3D Printing of Bio-Based Polycarbonate and Its Potential Applications in Ecofriendly Indoor Manufacturing

(2019) Seong Je Park et al.   Additive Manufacturing

Silk fibroin/gelatin microcarriers as scaffolds for bone tissue engineering

(2019) Kim A. Luetchford et al.   Materials Science & Engineering C-Materials for Biological Applications

Effect of interaction between sorbitol and gelatin on gelatin properties and its mechanism under different citric acid concentrations

(2019) Hongjie Dai et al.   FOOD HYDROCOLLOIDS

Porous stable poly(lactic acid)/ethyl cellulose/hydroxyapatite composite scaffolds prepared by a combined method for bone regeneration

(2018) Daoyong Mao et al.   CARBOHYDRATE POLYMERS

3D printing with cellulose materials

(2018) Qianqian Wang et al.   CELLULOSE

Biocompatibility, biodegradation and excretion of polylactic acid (PLA) in medical implants and theranostic systems

(2018) Dana da Silva et al.   CHEMICAL ENGINEERING JOURNAL

3D Printed Surgical Simulation Models as educational tool by maxillofacial surgeons

(2018) S. M. Werz et al.   European Journal of Dental Education

Composite PLA/PEG/nHA/Dexamethasone Scaffold Prepared by 3D Printing for Bone Regeneration

(2018) Xiaoyuan Li et al.   MACROMOLECULAR BIOSCIENCE

Mechanical Properties of Optimized Diamond Lattice Structure for Bone Scaffolds Fabricated via Selective Laser Melting

(2018) Fei Liu et al.   Materials

3D printing of concentrated alginate/gelatin scaffolds with homogeneous nano apatite coating for bone tissue engineering

(2018) Yongxiang Luo et al.   MATERIALS & DESIGN

In Vitro Regeneration of Patient-specific Ear-shaped Cartilage and Its First Clinical Application for Auricular Reconstruction

(2018) Guangdong Zhou et al.   EBioMedicine

Modular ceramic scaffolds for individual implants

(2018) Jonas Biggemann et al.   Acta Biomaterialia

3D-printed bioceramic scaffolds: From bone tissue engineering to tumor therapy

(2018) Hongshi Ma et al.   Acta Biomaterialia

Current state of fabrication technologies and materials for bone tissue engineering

(2018) Abiy Wubneh et al.   Acta Biomaterialia

Mechanical and cytotoxicity properties of hybrid ceramics filled polyamide 12 filament feedstock for craniofacial bone reconstruction via fused deposition modelling

(2018) Abdul Manaf Abdullah et al.   DENTAL MATERIALS

Preparation, characterization and in vitro test of composites poly-lactic acid/hydroxyapatite scaffolds for bone tissue engineering

(2018) Francesco Carfì Pavia et al.   INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES

Synergistic delivery of bFGF and BMP-2 from poly(l-lactic-co-glycolic acid)/graphene oxide/hydroxyapatite nanofibre scaffolds for bone tissue engineering applications

(2018) Xiansheng Ren et al.   RSC Advances

Transformation of e-waste plastics into sustainable filaments for 3-D printing

(2018) Vaibhav Gaikwad et al.   ACS Sustainable Chemistry & Engineering

Three-dimensional (3D) printed scaffold and material selection for bone repair

(2018) Lei Zhang et al.   Acta Biomaterialia

Tissue-specific extracellular matrix scaffolds for the regeneration of spatially complex musculoskeletal tissues

(2018) Gráinne M. Cunniffe et al.   BIOMATERIALS

Applications of 3D printing on craniofacial bone repair: A systematic review

(2018) Michael Maroulakos et al.   JOURNAL OF DENTISTRY

3D printing anatomical models of head bones

(2018) M. Bartikian et al.   SURGICAL AND RADIOLOGIC ANATOMY

Direct 3D Printing of Flexible Nasal Prosthesis: Optimized Digital Workflow from Scan to Fit

(2018) Amjad Nuseir et al.   Journal of Prosthodontics-Implant Esthetic and Reconstructive Dentistry

3D Printing of PLA/clay Nanocomposites: Influence of Printing Temperature on Printed Samples Properties

(2018) Bartolomeo Coppola et al.   Materials

The improvement of mechanical and thermal properties of polyamide 12 3D printed parts by fused deposition modelling

(2017) T. N. A. T. Rahim et al.   Express Polymer Letters

Comparative study of three kinds of fibula cutting guides in reshaping fibula for the reconstruction of mandible: An accuracy simulation study in vitro

(2017) Zhiwei Dong et al.   JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY

Is 3D printing safe? Analysis of the thermal treatment of thermoplastics: ABS, PLA, PET, and nylon

(2017) Szymon Wojtyła et al.   JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE

Structural Evolution of PCL during Melt Extrusion 3D Printing

(2017) Fengyuan Liu et al.   MACROMOLECULAR MATERIALS AND ENGINEERING

Interpenetrating network hydrogels with high strength and transparency for potential use as external dressings

(2017) Jingjing Wang et al.   Materials Science & Engineering C-Materials for Biological Applications

Alginate Microcapsules Incorporating Hyaluronic Acid Recreate Closer in Vivo Environment for Mesenchymal Stem Cells

(2017) Alberto Cañibano-Hernández et al.   MOLECULAR PHARMACEUTICS

In situ bone tissue engineering via ultrasound-mediated gene delivery to endogenous progenitor cells in mini-pigs

(2017) Maxim Bez et al.   Science Translational Medicine

Biomimetic Approaches for Bone Tissue Engineering

(2017) Johnathan Ng et al.   TISSUE ENGINEERING PART B-REVIEWS

3D Printing of Lotus Root-Like Biomimetic Materials for Cell Delivery and Tissue Regeneration

(2017) Chun Feng et al.   Advanced Science

3D biomimetic artificial bone scaffolds with dual-cytokines spatiotemporal delivery for large weight-bearing bone defect repair

(2017) Xiaogang Bao et al.   Scientific Reports

High-strength porous biomaterials for bone replacement: A strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints

(2016) Sajad Arabnejad et al.   Acta Biomaterialia

Rapid Continuous Multimaterial Extrusion Bioprinting

(2016) Wanjun Liu et al.   ADVANCED MATERIALS

A novel chitosan- tussah silk fibroin/nano-hydroxyapatite composite bone scaffold platform with tunable mechanical strength in a wide range

(2016) Jiabing Ran et al.   INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES

An overview of chitin or chitosan/nano ceramic composite scaffolds for bone tissue engineering

(2016) S. Deepthi et al.   INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES

Chitin and Chitosan: Structure, Properties and Applications in Biomedical Engineering

(2016) S. Islam et al.   JOURNAL OF POLYMERS AND THE ENVIRONMENT

The nanocomposite nature of bone drives its strength and damage resistance

(2016) Ottman A. Tertuliano et al.   NATURE MATERIALS

3D printing of versatile reactionware for chemical synthesis

(2016) Philip J Kitson et al.   Nature Protocols

Fabrication of 3D Biomimetic Microfluidic Networks in Hydrogels

(2016) Keely A. Heintz et al.   Advanced Healthcare Materials

Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing

(2016) Zixiang Weng et al.   MATERIALS & DESIGN

Combination of fused deposition modeling and gas foaming technique to fabricated hierarchical macro/microporous polymer scaffolds

(2016) Changchun Zhou et al.   MATERIALS & DESIGN

Improving vascularization of engineered bone through the generation of pro-angiogenic effects in co-culture systems

(2015) Ronald E. Unger et al.   ADVANCED DRUG DELIVERY REVIEWS

Inkjet-bioprinted acrylated peptides and PEG hydrogel with human mesenchymal stem cells promote robust bone and cartilage formation with minimal printhead clogging

(2015) Guifang Gao et al.   Biotechnology Journal

3D-Printed ABS and PLA Scaffolds for Cartilage and Nucleus Pulposus Tissue Regeneration

(2015) Derek Rosenzweig et al.   INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES

Development of gelatin-chitosan-hydroxyapatite based bioactive bone scaffold with controlled pore size and mechanical strength

(2015) Kanchan Maji et al.   JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION

Tissue Engineering of Human Nasal Alar Cartilage Precisely by Using Three-Dimensional Printing

(2015) Yihao Xu et al.   PLASTIC AND RECONSTRUCTIVE SURGERY

Preparation and mechanical properties of a copolycarbonate composed of bio-based isosorbide and bisphenol A

(2015) Chi-Han Lee et al.   POLYMER JOURNAL

Tough biodegradable chitosan–gelatin hydrogels via in situ precipitation for potential cartilage tissue engineering

(2015) Zhi-Sen Shen et al.   RSC Advances

Inkjet-bioprinted acrylated peptides and PEG hydrogel with human mesenchymal stem cells promote robust bone and cartilage formation with minimal printhead clogging

(2015) Guifang Gao et al.   Biotechnology Journal

Competing forces during cellulose dissolution: From solvents to mechanisms

(2014) Bruno Medronho et al.   CURRENT OPINION IN COLLOID & INTERFACE SCIENCE

Inkjet printing biomaterials for tissue engineering: bioprinting

(2014) Rachel Elizabeth Saunders et al.   INTERNATIONAL MATERIALS REVIEWS

Bioinspired structural materials

(2014) Ulrike G. K. Wegst et al.   NATURE MATERIALS

Architectural and Mechanical Cues Direct Mesenchymal Stem Cell Interactions with Crosslinked Gelatin Scaffolds

(2014) Kathleen M. McAndrews et al.   TISSUE ENGINEERING PART A

Natural Cellulose Fiber as Substrate for Supercapacitor

(2013) Zhe Gui et al.   ACS Nano

Assessment of health-related quality of life in Turkish patients with facial prostheses

(2013) Arzu Atay et al.   Health and Quality of Life Outcomes

Preparation and characterization of collagen/PLA, chitosan/PLA, and collagen/chitosan/PLA hybrid scaffolds for cartilage tissue engineering

(2013) Anne-Marie Haaparanta et al.   JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE

Quality of life of patients with implant-retained maxillofacial prostheses: A prospective and retrospective study

(2013) Secil Karakoca Nemli et al.   JOURNAL OF PROSTHETIC DENTISTRY

Three-dimensional print of a liver for preoperative planning in living donor liver transplantation

(2013) Nizar N. Zein et al.   LIVER TRANSPLANTATION

Bone tissue engineering using 3D printing

(2013) Susmita Bose et al.   Materials Today

Scaffolds for bone tissue engineering fabricated from two different materials by the rapid prototyping technique: PCL versus PLGA

(2012) So Hee Park et al.   JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE

Special considerations in virtual surgical planning for secondary accurate maxillary reconstruction with vascularised fibula osteomyocutaneous flap

(2012) Yi Shen et al.   Journal of Plastic Reconstructive and Aesthetic Surgery

A Tissue Engineering Solution for Segmental Defect Regeneration in Load-Bearing Long Bones

(2012) J. C. Reichert et al.   Science Translational Medicine

Self-assembled composite matrix in a hierarchical 3-D scaffold for bone tissue engineering

(2011) Muwan Chen et al.   Acta Biomaterialia

Current Strategies in Reconstruction of Maxillectomy Defects

(2011) Patricio Andrades   ARCHIVES OF OTOLARYNGOLOGY-HEAD & NECK SURGERY

Living Bone Allotransplants Survive by Surgical Angiogenesis Alone: Development of a Novel Method of Composite Tissue Allotransplantation

(2011) Mikko Larsen et al.   JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME

Mechanical and microstructural properties of polycaprolactone scaffolds with one-dimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering

(2010) Shaun Eshraghi et al.   Acta Biomaterialia

Computer-Aided Design and Manufacturing and Rapid Prototyped Nanoscale Hydroxyapatite/Polyamide (n-HA/PA) Construction for Condylar Defect Caused by Mandibular Angle Ostectomy

(2010) Jihua Li et al.   AESTHETIC PLASTIC SURGERY

A review on stereolithography and its applications in biomedical engineering

(2010) Ferry P.W. Melchels et al.   BIOMATERIALS

Bone regeneration using a microstereolithography-produced customized poly(propylene fumarate)/diethyl fumarate photopolymer 3D scaffold incorporating BMP-2 loaded PLGA microspheres

(2010) Jin Woo Lee et al.   BIOMATERIALS

An overview of the recent developments in polylactide (PLA) research

(2010) K. Madhavan Nampoothiri et al.   BIORESOURCE TECHNOLOGY

Clinical considerations in face transplantation

(2010) Sathnur B. Pushpakumar et al.   BURNS

Cellulose microfibres produced from banana plant wastes: Isolation and characterization

(2010) Silviya Elanthikkal et al.   CARBOHYDRATE POLYMERS

Autologous Bone Graft: Properties and Techniques

(2010) Hans Christoph Pape et al.   JOURNAL OF ORTHOPAEDIC TRAUMA

N-Acetylglucosamine: Production and Applications

(2010) Jeen-Kuan Chen et al.   Marine Drugs

Osteoinductive ceramics as a synthetic alternative to autologous bone grafting

(2010) H. Yuan et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Cellulose modification by polymer grafting: a review

(2009) Debashish Roy et al.   CHEMICAL SOCIETY REVIEWS

Study of the electrospun PLA/silk fibroin-gelatin composite nanofibrous scaffold for tissue engineering

(2009) Yin Gui-Bo et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Polymers from renewable 1,4:3,6-dianhydrohexitols (isosorbide, isomannide and isoidide): A review

(2009) F. Fenouillot et al.   PROGRESS IN POLYMER SCIENCE

The relationship between the mechanical properties and cell behaviour on PLGA and PCL scaffolds for bladder tissue engineering

(2008) Simon C. Baker et al.   BIOMATERIALS

Immobilized hyaluronic acid containing model silicone hydrogels reduce protein adsorption

(2008) Mark van Beek et al.   JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION

Pediatric cardiac transplantation: Three-dimensional printing of anatomic models for surgical planning of heart transplantation in patients with univentricular heart

(2008) Ralf Sodian et al.   JOURNAL OF THORACIC AND CARDIOVASCULAR SURGERY