Advancing Frontiers in Bone Bioprinting

Silk-Based Bioinks for 3D Bioprinting

(2018) Shikha Chawla et al.   Advanced Healthcare Materials

4D Biofabrication: Materials, Methods, and Applications

(2018) Leonid Ionov   Advanced Healthcare Materials

Development of a novel alginate-polyvinyl alcohol-hydroxyapatite hydrogel for 3D bioprinting bone tissue engineered scaffolds

(2017) Stephanie T. Bendtsen et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Stimuli-Responsive Biomaterials

(2017) Nureddin Ashammakhi et al.   JOURNAL OF CRANIOFACIAL SURGERY

Single cell-laden protease-sensitive microniches for long-term culture in 3D

(2017) Philipp S. Lienemann et al.   LAB ON A CHIP

The dangers of unregulated stem-cell marketing

(2017) Dara Mohammadi   LANCET

Advances in engineering hydrogels

(2017) Yu Shrike Zhang et al.   SCIENCE

Bioprinting and Organ-on-Chip Applications Towards Personalized Medicine for Bone Diseases

(2017) Chiara Arrigoni et al.   Stem Cell Reviews and Reports

Short-term hypoxic preconditioning promotes prevascularization in 3D bioprinted bone constructs with stromal vascular fraction derived cells

(2017) Mitchell A. Kuss et al.   RSC Advances

Engineering Photocrosslinkable Bicomponent Hydrogel Constructs for Creating 3D Vascularized Bone

(2017) Mehdi Kazemzadeh-Narbat et al.   Advanced Healthcare Materials

Recent Advances in Extrusion-Based 3D Printing for Biomedical Applications

(2017) Jesse K. Placone et al.   Advanced Healthcare Materials

Bioprinted Osteogenic and Vasculogenic Patterns for Engineering 3D Bone Tissue

(2017) Batzaya Byambaa et al.   Advanced Healthcare Materials

Bioprinting and Organ-on-Chip Applications Towards Personalized Medicine for Bone Diseases

(2017) Chiara Arrigoni et al.   Stem Cell Reviews and Reports

Interplay between materials and microfluidics

(2017) Xu Hou et al.   Nature Reviews Materials

3D bioprinting of methacrylated hyaluronic acid (MeHA) hydrogel with intrinsic osteogenicity

(2017) Michelle T. Poldervaart et al.   PLoS One

Scientometric and patentometric analyses to determine the knowledge landscape in innovative technologies: The case of 3D bioprinting

(2017) Marisela Rodríguez-Salvador et al.   PLoS One

Quadriwave lateral shearing interferometric microscopy with wideband sensitivity enhancement for quantitative phase imaging in real time

(2017) Tong Ling et al.   Scientific Reports

In situ printing of mesenchymal stromal cells, by laser-assisted bioprinting, for in vivo bone regeneration applications

(2017) Virginie Keriquel et al.   Scientific Reports

Controlled and Sequential Delivery of Fluorophores from 3D Printed Alginate-PLGA Tubes

(2016) Anh-Vu Do et al.   ANNALS OF BIOMEDICAL ENGINEERING

Effect of Chemistry on Osteogenesis and Angiogenesis Towards Bone Tissue Engineering Using 3D Printed Scaffolds

(2016) Susmita Bose et al.   ANNALS OF BIOMEDICAL ENGINEERING

Water-based polyurethane 3D printed scaffolds with controlled release function for customized cartilage tissue engineering

(2016) Kun-Che Hung et al.   BIOMATERIALS

Current advances and future perspectives in extrusion-based bioprinting

(2016) Ibrahim T. Ozbolat et al.   BIOMATERIALS

hiPSC-derived iMSCs: NextGen MSCs as an advanced therapeutically active cell resource for regenerative medicine

(2016) Vikram Sabapathy et al.   JOURNAL OF CELLULAR AND MOLECULAR MEDICINE

A synergistic approach to the design, fabrication and evaluation of 3D printed micro and nano featured scaffolds for vascularized bone tissue repair

(2016) Benjamin Holmes et al.   NANOTECHNOLOGY

A 3D bioprinting system to produce human-scale tissue constructs with structural integrity

(2016) Hyun-Wook Kang et al.   NATURE BIOTECHNOLOGY

Deterministic encapsulation of single cells in thin tunable microgels for niche modelling and therapeutic delivery

(2016) Angelo S. Mao et al.   NATURE MATERIALS

Biomimetic 4D printing

(2016) A. Sydney Gladman et al.   NATURE MATERIALS

Hyperelastic “bone”: A highly versatile, growth factor–free, osteoregenerative, scalable, and surgically friendly biomaterial

(2016) Adam E. Jakus et al.   Science Translational Medicine

Hierarchical Structures of Bone and Bioinspired Bone Tissue Engineering

(2016) Yan Liu et al.   Small

A Review of Three-Dimensional Printing in Tissue Engineering

(2016) Nick A. Sears et al.   TISSUE ENGINEERING PART B-REVIEWS

Gelatin-Methacryloyl Hydrogels: Towards Biofabrication-Based Tissue Repair

(2016) Barbara J. Klotz et al.   TRENDS IN BIOTECHNOLOGY

Design and Printing Strategies in 3D Bioprinting of Cell-Hydrogels: A Review

(2016) Jia Min Lee et al.   Advanced Healthcare Materials

Single Cell Microgel Based Modular Bioinks for Uncoupled Cellular Micro- and Macroenvironments

(2016) Tom Kamperman et al.   Advanced Healthcare Materials

Tuning Reaction and Diffusion Mediated Degradation of Enzyme-Sensitive Hydrogels

(2016) Stacey C. Skaalure et al.   Advanced Healthcare Materials

Bioprinting Organotypic Hydrogels with Improved Mesenchymal Stem Cell Remodeling and Mineralization Properties for Bone Tissue Engineering

(2016) Daniela Filipa Duarte Campos et al.   Advanced Healthcare Materials

Hierarchical Fabrication of Engineered Vascularized Bone Biphasic Constructs via Dual 3D Bioprinting: Integrating Regional Bioactive Factors into Architectural Design

(2016) Haitao Cui et al.   Advanced Healthcare Materials

Patterning of Endothelial Cells and Mesenchymal Stem Cells by Laser-Assisted Bioprinting to Study Cell Migration

(2016) Jean-Michel Bourget et al.   Biomed Research International

A simultaneous 3D printing process for the fabrication of bioceramic and cell-laden hydrogel core/shell scaffolds with potential application in bone tissue regeneration

(2016) Naren Raja et al.   Journal of Materials Chemistry B

3D-Bioprinting of Polylactic Acid (PLA) Nanofiber–Alginate Hydrogel Bioink Containing Human Adipose-Derived Stem Cells

(2016) Lokesh Karthik Narayanan et al.   ACS Biomaterials-Science & Engineering

Biologically Inspired Smart Release System Based on 3D Bioprinted Perfused Scaffold for Vascularized Tissue Regeneration

(2016) Haitao Cui et al.   Advanced Science

3D-Bioprinting of Polylactic Acid (PLA) Nanofiber–Alginate Hydrogel Bioink Containing Human Adipose-Derived Stem Cells

(2016) Lokesh Karthik Narayanan et al.   ACS Biomaterials Science & Engineering

Multimaterial 4D Printing with Tailorable Shape Memory Polymers

(2016) Qi Ge et al.   Scientific Reports

Bioprintable, cell-laden silk fibroin–gelatin hydrogel supporting multilineage differentiation of stem cells for fabrication of three-dimensional tissue constructs

(2015) Sanskrita Das et al.   Acta Biomaterialia

Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low-Viscosity Bioink

(2015) Cristina Colosi et al.   ADVANCED MATERIALS

Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks

(2015) James O. Hardin et al.   ADVANCED MATERIALS

Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels

(2015) Kan Yue et al.   BIOMATERIALS

Ornamenting 3D printed scaffolds with cell-laid extracellular matrix for bone tissue regeneration

(2015) Falguni Pati et al.   BIOMATERIALS

Inkjet-bioprinted acrylated peptides and PEG hydrogel with human mesenchymal stem cells promote robust bone and cartilage formation with minimal printhead clogging

(2015) Guifang Gao et al.   Biotechnology Journal

Three-dimensional bioprinting in tissue engineering and regenerative medicine

(2015) Guifang Gao et al.   BIOTECHNOLOGY LETTERS

Improved properties of bone and cartilage tissue from 3D inkjet-bioprinted human mesenchymal stem cells by simultaneous deposition and photocrosslinking in PEG-GelMA

(2015) Guifang Gao et al.   BIOTECHNOLOGY LETTERS

Bringing new life to damaged bone: The importance of angiogenesis in bone repair and regeneration

(2015) Steve Stegen et al.   BONE

Piezoelectric polymers as biomaterials for tissue engineering applications

(2015) Clarisse Ribeiro et al.   COLLOIDS AND SURFACES B-BIOINTERFACES

Three-Dimensional Bioprinting for Regenerative Dentistry and Craniofacial Tissue Engineering

(2015) F. Obregon et al.   JOURNAL OF DENTAL RESEARCH

3-Dimensional cell-laden nano-hydroxyapatite/protein hydrogels for bone regeneration applications

(2015) Mehdi Sadat-Shojai et al.   Materials Science & Engineering C-Materials for Biological Applications

Composite ECM–alginate microfibers produced by microfluidics as scaffolds with biomineralization potential

(2015) Marco Angelozzi et al.   Materials Science & Engineering C-Materials for Biological Applications

Active mixing of complex fluids at the microscale

(2015) Thomas J. Ober et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

The effect of low-frequency electromagnetic field on human bone marrow stem/progenitor cell differentiation

(2015) Christina L. Ross et al.   Stem Cell Research

Reinforcement of hydrogels using three-dimensionally printed microfibres

(2015) Jetze Visser et al.   Nature Communications

Decoupling the role of stiffness from other hydroxyapatite signalling cues in periosteal derived stem cell differentiation

(2015) Giorgio Mattei et al.   Scientific Reports

High-Resolution Projection Microstereolithography for Patterning of Neovasculature

(2015) Ritu Raman et al.   Advanced Healthcare Materials

Inkjet-bioprinted acrylated peptides and PEG hydrogel with human mesenchymal stem cells promote robust bone and cartilage formation with minimal printhead clogging

(2015) Guifang Gao et al.   Biotechnology Journal

Phage Nanofibers Induce Vascularized Osteogenesis in 3D Printed Bone Scaffolds

(2014) Jianglin Wang et al.   ADVANCED MATERIALS

3D Bioprinting of Vascularized, Heterogeneous Cell-Laden Tissue Constructs

(2014) David B. Kolesky et al.   ADVANCED MATERIALS

Engineering a morphogenetically active hydrogel for bioprinting of bioartificial tissue derived from human osteoblast-like SaOS-2 cells

(2014) Meik Neufurth et al.   BIOMATERIALS

Bioactive nanoparticles stimulate bone tissue formation in bioprinted three-dimensional scaffold and human mesenchymal stem cells

(2014) Guifang Gao et al.   Biotechnology Journal

Bioprinting Technology: A Current State-of-the-Art Review

(2014) Amer B. Dababneh et al.   JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME

3D bioprinting of tissues and organs

(2014) Sean V Murphy et al.   NATURE BIOTECHNOLOGY

Effect of Bioglass on Growth and Biomineralization of SaOS-2 Cells in Hydrogel after 3D Cell Bioprinting

(2014) Xiaohong Wang et al.   PLoS One

Hope versus hype: what can additive manufacturing realistically offer trauma and orthopedic surgery?

(2014) David MR Gibbs et al.   Regenerative Medicine

Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers

(2014) Riccardo Levato et al.   Biofabrication

Active Printed Materials for Complex Self-Evolving Deformations

(2014) Dan Raviv et al.   Scientific Reports

Bone regenerative medicine: classic options, novel strategies, and future directions

(2014) Ahmad Oryan et al.   Journal of Orthopaedic Surgery and Research

Rapid prototyping of chitosan-coated alginate scaffolds through the use of a 3D fiber deposition technique

(2014) Cristina Colosi et al.   Journal of Materials Chemistry B

Tunable hydrogel composite with two-step processing in combination with innovative hardware upgrade for cell-based three-dimensional bioprinting

(2013) Silke Wüst et al.   Acta Biomaterialia

25th Anniversary Article: Engineering Hydrogels for Biofabrication

(2013) Jos Malda et al.   ADVANCED MATERIALS

Effects of matrix elasticity and cell density on human mesenchymal stem cells differentiation

(2013) Ruyue Xue et al.   JOURNAL OF ORTHOPAEDIC RESEARCH

Plug and play: combining materials and technologies to improve bone regenerative strategies

(2013) Lorenzo Moroni et al.   Journal of Tissue Engineering and Regenerative Medicine

Virus activated artificial ECM induces the osteoblastic differentiation of mesenchymal stem cells without osteogenic supplements

(2013) Jianglin Wang et al.   Scientific Reports

Porous bioprinted constructs in BMP-2 non-viral gene therapy for bone tissue engineering

(2013) Loek D. Loozen et al.   Journal of Materials Chemistry B

Functional Human Vascular Network Generated in Photocrosslinkable Gelatin Methacrylate Hydrogels

(2012) Ying-Chieh Chen et al.   ADVANCED FUNCTIONAL MATERIALS

Precise Control of Osteogenesis for Craniofacial Defect Repair

(2012) Darren M. Smith et al.   ANNALS OF PLASTIC SURGERY

Cell(MC3T3-E1)-Printed Poly(ϵ-caprolactone)/Alginate Hybrid Scaffolds for Tissue Regeneration

(2012) HyeongJin Lee et al.   MACROMOLECULAR RAPID COMMUNICATIONS

Human Inferior Turbinate

(2012) Se Hwan Hwang et al.   OTOLARYNGOLOGY-HEAD AND NECK SURGERY

Engineering Complex Tissues

(2012) A. Atala et al.   Science Translational Medicine

Building Vascular Networks

(2012) H. Bae et al.   Science Translational Medicine

Hybrid Magnetic Hydrogel: A Potential System for Controlled Drug Delivery by Means of Alternating Magnetic Fields

(2012) Gabriele Giani et al.   Polymers

A Printable Photopolymerizable Thermosensitive p(HPMAm-lactate)-PEG Hydrogel for Tissue Engineering

(2011) Roberta Censi et al.   ADVANCED FUNCTIONAL MATERIALS

The influence of elasticity and surface roughness on myogenic and osteogenic-differentiation of cells on silk-elastin biomaterials

(2011) Xiao Hu et al.   BIOMATERIALS

Bioprinting of growth factors onto aligned sub-micron fibrous scaffolds for simultaneous control of cell differentiation and alignment

(2011) Elmer D.F. Ker et al.   BIOMATERIALS

Tuning polycaprolactone–carbon nanotube composites for bone tissue engineering scaffolds

(2011) Monica Mattioli-Belmonte et al.   Materials Science & Engineering C-Materials for Biological Applications

In Vitro Model of Vascularized Bone: Synergizing Vascular Development and Osteogenesis

(2011) Cristina Correia et al.   PLoS One

Nasal Septum-Derived Multipotent Progenitors: A Potent Source for Stem Cell-Based Regenerative Medicine

(2011) Abbas Shafiee et al.   STEM CELLS AND DEVELOPMENT

Distinct Tissue Formation by Heterogeneous Printing of Osteo- and Endothelial Progenitor Cells

(2011) Natalja E. Fedorovich et al.   TISSUE ENGINEERING PART A

Biofabrication of Osteochondral Tissue Equivalents by Printing Topologically Defined, Cell-Laden Hydrogel Scaffolds

(2011) Natalja E. Fedorovich et al.   TISSUE ENGINEERING PART C-METHODS

Organ engineering based on decellularized matrix scaffolds

(2011) Jeremy J. Song et al.   TRENDS IN MOLECULAR MEDICINE

Development of a hybrid scaffold with synthetic biomaterials and hydrogel using solid freeform fabrication technology

(2011) Jin-Hyung Shim et al.   Biofabrication

Dynamically Crosslinked Gold Nanoparticle - Hyaluronan Hydrogels

(2010) Aleksander Skardal et al.   ADVANCED MATERIALS

Cell damage evaluation of thermal inkjet printed Chinese hamster ovary cells

(2010) Xiaofeng Cui et al.   BIOTECHNOLOGY AND BIOENGINEERING

The Role of Endothelial Progenitor Cells in Prevascularized Bone Tissue Engineering: Development of Heterogeneous Constructs

(2010) Natalja E. Fedorovich et al.   TISSUE ENGINEERING PART A

Laser Printing of Stem Cells for Biofabrication of Scaffold-Free Autologous Grafts

(2010) Martin Gruene et al.   TISSUE ENGINEERING PART C-METHODS

Methods for Photocrosslinking Alginate Hydrogel Scaffolds with High Cell Viability

(2010) Andrew D. Rouillard et al.   TISSUE ENGINEERING PART C-METHODS

Crosstalk between osteoblasts and endothelial cells co-cultured on a polycaprolactone–starch scaffold and the in vitro development of vascularization

(2009) Marina I. Santos et al.   BIOMATERIALS

Inkjet-Based Biopatterning of Bone Morphogenetic Protein-2 to Spatially Control Calvarial Bone Formation

(2009) Gregory M. Cooper et al.   TISSUE ENGINEERING PART A

Layer by Layer Three-dimensional Tissue Epitaxy by Cell-Laden Hydrogel Droplets

(2009) SangJun Moon et al.   TISSUE ENGINEERING PART C-METHODS

The effect of photopolymerization on stem cells embedded in hydrogels

(2008) Natalja E. Fedorovich et al.   BIOMATERIALS

Temporal control of drug release from biodegradable polymer: Multicomponent diclofenac sodium releasing PLGA 80/20 rod

(2008) Lila Nikkola et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

Updates on stem cells and their applications in regenerative medicine

(2008) Stefan Bajada et al.   Journal of Tissue Engineering and Regenerative Medicine

Generation of alginate microfibers with a roller-assisted microfluidic system

(2008) Jing Su et al.   LAB ON A CHIP

Three-Dimensional Fiber Deposition of Cell-Laden, Viable, Patterned Constructs for Bone Tissue Printing

(2008) Natalja E. Fedorovich et al.   TISSUE ENGINEERING PART A

Effects of Dispensing Pressure and Nozzle Diameter on Cell Survival from Solid Freeform Fabrication–Based Direct Cell Writing

(2008) Robert Chang et al.   TISSUE ENGINEERING PART A