Performance evaluation of the minimum quantity lubrication with Al2O3- mixed vegetable-oil-based cutting fluid in drilling of AISI 321 stainless steel
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Performance evaluation of the minimum quantity lubrication with Al2O3- mixed vegetable-oil-based cutting fluid in drilling of AISI 321 stainless steel
Authors
Keywords
Minimum quantity lubrication, Al, 2, O, 3, nanoparticle, Stainless steel
Journal
Journal of Manufacturing Processes
Volume 66, Issue -, Pages 238-249
Publisher
Elsevier BV
Online
2021-04-19
DOI
10.1016/j.jmapro.2021.04.024
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Tribological characteristics and drilling performance of nano-MoS2-enhanced vegetable oil-based cutting fluid using eco-friendly MQL technique in drilling of AISI 321 stainless steel
- (2021) Amrit Pal et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Performance evaluation of minimum quantity lubrication technique in grinding of AISI 202 stainless steel using nano-MoS2 with vegetable-based cutting fluid
- (2020) Amrit Pal et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Delamination formation, evaluation and suppression during drilling of composite laminates: A review
- (2019) Daxi Geng et al. COMPOSITE STRUCTURES
- Effects of reinforced nanoparticles with surfactant on surface quality and chip formation morphology in MQL-turning of superalloys
- (2019) S.H. Musavi et al. Journal of Manufacturing Processes
- The coupling effect of micro-groove textures and nanofluids on cutting performance of uncoated cemented carbide tools in milling Ti-6Al-4V
- (2019) Chichi Zhou et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Tool wear and hole quality evaluation in cryogenic Drilling of Inconel 718 superalloy
- (2019) Navneet Khanna et al. TRIBOLOGY INTERNATIONAL
- Solid Lubricant-assisted Minimum Quantity Lubrication and Cooling strategies to improve Ti6Al4V machinability in finishing turning
- (2018) S. Sartori et al. TRIBOLOGY INTERNATIONAL
- The effects of cutting conditions on cutting temperature and hole quality in drilling of Inconel 718 using solid carbide drills
- (2018) Necati Uçak et al. Journal of Manufacturing Processes
- Tribological and machining characteristics of an electrostatic minimum quantity lubrication (EMQL) technology using graphene nano-lubricants as cutting fluids
- (2018) Tao Lv et al. Journal of Manufacturing Processes
- Drilling performance of micro textured tools under dry, wet and MQL condition
- (2018) Niketh S. et al. Journal of Manufacturing Processes
- Parameter optimization during minimum quantity lubrication milling of TC4 alloy with graphene-dispersed vegetable-oil-based cutting fluid
- (2018) Ming Li et al. JOURNAL OF CLEANER PRODUCTION
- Cutting temperature and resulting influence on machining performance in rotary ultrasonic elliptical machining of thick CFRP
- (2017) Daxi Geng et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Application of eco-friendly nanofluids during grinding of Inconel 718 through small quantity lubrication
- (2017) Manoj Kumar Sinha et al. JOURNAL OF CLEANER PRODUCTION
- Comparative evaluation of the lubricating properties of vegetable-oil-based nanofluids between frictional test and grinding experiment
- (2017) Yaogang Wang et al. Journal of Manufacturing Processes
- Performance and mechanisms of graphene oxide suspended cutting fluid in the drilling of titanium alloy Ti-6Al-4V
- (2017) Shuang Yi et al. Journal of Manufacturing Processes
- Finish turning of Ti-6Al-4V with the atomization-based cutting fluid (ACF) spray system
- (2017) Chandra Nath et al. Journal of Manufacturing Processes
- Enhancing lubricant properties by nanoparticle additives
- (2016) Sheida Shahnazar et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Performance of water-based TiO 2 nanofluid during the minimum quantity lubrication machining of aluminium alloy, AA6061-T6
- (2016) M.S. Najiha et al. JOURNAL OF CLEANER PRODUCTION
- Optimization of machining parameters and cutting fluids during nano-fluid based minimum quantity lubrication turning of titanium alloy by using evolutionary techniques
- (2016) Munish Kumar Gupta et al. JOURNAL OF CLEANER PRODUCTION
- Assessing the lubrication performance of vegetable oil-based nano-lubricants for environmentally conscious metal forming processes
- (2016) Behrooz Zareh-Desari et al. JOURNAL OF CLEANER PRODUCTION
- Performance evaluation of aluminium 6063 drilling under the influence of nanofluid minimum quantity lubrication
- (2016) Sukhpal Singh Chatha et al. JOURNAL OF CLEANER PRODUCTION
- Ultrasonic assisted grinding process with minimum quantity lubrication using oil-based nanofluids
- (2016) M.M. Molaie et al. JOURNAL OF CLEANER PRODUCTION
- Micro-drilling of Ti–6Al–4V alloy: The effects of cooling/lubricating
- (2016) M. Perçin et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Lubrication performance of MoS2 and SiO2 nanoparticles as lubricant additives in magnesium alloy-steel contacts
- (2016) Hongmei Xie et al. TRIBOLOGY INTERNATIONAL
- Effectiveness of vegetable oil based nanofluids as potential cutting fluids in turning AISI 1040 steel
- (2016) R. Padmini et al. TRIBOLOGY INTERNATIONAL
- Numerical optimization of the Minimum Quantity Lubrication parameters by inner canalizations and cutting conditions for milling finishing process with Taguchi method
- (2015) A. Duchosal et al. JOURNAL OF CLEANER PRODUCTION
- Analyzing effects of cooling and lubrication conditions in micromilling of Ti6Al4V
- (2015) Elisa Vazquez et al. JOURNAL OF CLEANER PRODUCTION
- Optimization of environmentally benign micro-drilling process with nanofluid minimum quantity lubrication using response surface methodology and genetic algorithm
- (2015) Jung Soo Nam et al. JOURNAL OF CLEANER PRODUCTION
- Application of sustainable techniques in metal cutting for enhanced machinability: a review
- (2015) Chetan et al. JOURNAL OF CLEANER PRODUCTION
- A review of recent developments of friction modifiers for liquid lubricants (2007–present)
- (2014) Zhenglin Tang et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- The tribological properties of nanofluid used in minimum quantity lubrication grinding
- (2014) Cong Mao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental investigation on removing cutting fluid from turning of Inconel 725 with coated carbide tools
- (2014) Ahmadreza Hosseini Tazehkandi et al. JOURNAL OF CLEANER PRODUCTION
- Environmental friendly cutting fluids and cooling techniques in machining: a review
- (2014) Sujan Debnath et al. JOURNAL OF CLEANER PRODUCTION
- Preparation and Tribological Properties of Dual-Coated TiO2Nanoparticles as Water-Based Lubricant Additives
- (2014) Yue Gu et al. Journal of Nanomaterials
- Experimental verification of nanoparticle jet minimum quantity lubrication effectiveness in grinding
- (2014) Dongzhou Jia et al. JOURNAL OF NANOPARTICLE RESEARCH
- Performance Evaluation of Nanographite-Based Cutting Fluid in Machining Process
- (2014) M. Amrita et al. MATERIALS AND MANUFACTURING PROCESSES
- Enhancement of surface finish using water-miscible nano-cutting fluid in ultra-precision turning
- (2013) C.Y. Chan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Minimum quantity lubrication-MQL turning of AISI 4140 steel alloy
- (2013) Mohammadjafar Hadad et al. JOURNAL OF CLEANER PRODUCTION
- Morphology of surface generated by end milling AL6061-T6 using molybdenum disulfide (MoS2) nanolubrication in end milling machining
- (2013) Bizhan Rahmati et al. JOURNAL OF CLEANER PRODUCTION
- Investigation on the morphology of the machined surface in end milling of aerospace AL6061-T6 for novel uses of SiO2 nanolubrication system
- (2013) Mohd Sayuti et al. JOURNAL OF CLEANER PRODUCTION
- Effect of machining parameters on cutting force and surface roughness of in situ Al–4.5%Cu/TiC metal matrix composites
- (2013) Anand Kumar et al. MEASUREMENT
- A critical assessment of lubrication techniques in machining processes: a case for minimum quantity lubrication using vegetable oil-based lubricant
- (2012) Sunday Albert Lawal et al. JOURNAL OF CLEANER PRODUCTION
- Experimental characterization of micro-drilling process using nanofluid minimum quantity lubrication
- (2011) Jung Soo Nam et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Evaluation of vegetable based cutting fluids with extreme pressure and cutting parameters in turning of AISI 304L by Taguchi method
- (2011) M. Huseyin Cetin et al. JOURNAL OF CLEANER PRODUCTION
- An experimental investigation of affected layers formed in grinding of AISI 52100 steel
- (2010) Cong Mao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Dry and minimum quantity lubrication drilling of cast magnesium alloy (AM60)
- (2010) Sukanta Bhowmick et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Experimental evaluation of minimum quantity lubrication in near micro-milling
- (2010) Kuan-Ming Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effects of minimum quantity lubrication on turning AISI 9310 alloy steel using vegetable oil-based cutting fluid
- (2009) M.M.A. Khan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Enhancement of heat transfer using nanofluids—An overview
- (2009) Lazarus Godson et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Minimum quantity lubrication drilling of aluminium–silicon alloys in water using diamond-like carbon coated drills
- (2008) Sukanta Bhowmick et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Tribological properties and lubricating mechanisms of Cu nanoparticles in lubricant
- (2008) He-long YU et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
Add your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload NowAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started