Tribological characteristics and drilling performance of nano-MoS2-enhanced vegetable oil-based cutting fluid using eco-friendly MQL technique in drilling of AISI 321 stainless steel
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Tribological characteristics and drilling performance of nano-MoS2-enhanced vegetable oil-based cutting fluid using eco-friendly MQL technique in drilling of AISI 321 stainless steel
Authors
Keywords
-
Journal
Journal of the Brazilian Society of Mechanical Sciences and Engineering
Volume 43, Issue 4, Pages -
Publisher
Springer Science and Business Media LLC
Online
2021-03-08
DOI
10.1007/s40430-021-02899-5
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Milling force and surface morphology of 45 steel under different Al2O3 nanofluid concentrations
- (2020) Zhenjing Duan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Performance evaluation of minimum quantity lubrication technique in grinding of AISI 202 stainless steel using nano-MoS2 with vegetable-based cutting fluid
- (2020) Amrit Pal et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Synergistic effect of silica and pure palm oil on the machining performances of Inconel 690: A study for promoting minimum quantity nano doped-green lubricants
- (2020) Binayak Sen et al. JOURNAL OF CLEANER PRODUCTION
- Investigation of the influence of MWCNTs mixed nanofluid on the machinability characteristics of PH 13-8 Mo stainless steel
- (2020) Oğuzhan Öndin et al. TRIBOLOGY INTERNATIONAL
- End milling of AISI 304 steel using Minimum Quantity Lubrication
- (2019) M. Naresh Babu et al. MEASUREMENT
- Capillary penetration mechanism and oil mist concentration of Al2O3 nanoparticle fluids in electrostatic minimum quantity lubrication (EMQL) milling
- (2019) Xuefeng Xu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Performances of different eco-friendly nanofluid lubricants in the milling of Inconel X-750 superalloy
- (2019) Şenol Şirin et al. TRIBOLOGY INTERNATIONAL
- An investigation of carbon nanofluid minimum quantity lubrication for grinding unidirectional carbon fibre-reinforced ceramic matrix composites
- (2019) Shuoshuo Qu et al. JOURNAL OF CLEANER PRODUCTION
- Tool wear and hole quality evaluation in cryogenic Drilling of Inconel 718 superalloy
- (2019) Navneet Khanna et al. TRIBOLOGY INTERNATIONAL
- Influence of water-based copper nanofluid on wheel loading and surface roughness during grinding of Inconel 738 superalloy
- (2018) Farzad Pashmforoush et al. JOURNAL OF CLEANER PRODUCTION
- Experimental assessment of an environmentally friendly grinding process using nanofluid minimum quantity lubrication with cryogenic air
- (2018) Jianchao Zhang et al. JOURNAL OF CLEANER PRODUCTION
- Friction and wear mechanisms of castor oil with addition of hexagonal boron nitride nanoparticles
- (2018) Yongnan Wang et al. TRIBOLOGY INTERNATIONAL
- Solid Lubricant-assisted Minimum Quantity Lubrication and Cooling strategies to improve Ti6Al4V machinability in finishing turning
- (2018) S. Sartori et al. TRIBOLOGY INTERNATIONAL
- The effects of cutting conditions on cutting temperature and hole quality in drilling of Inconel 718 using solid carbide drills
- (2018) Necati Uçak et al. Journal of Manufacturing Processes
- Tribological and machining characteristics of an electrostatic minimum quantity lubrication (EMQL) technology using graphene nano-lubricants as cutting fluids
- (2018) Tao Lv et al. Journal of Manufacturing Processes
- Drilling performance of micro textured tools under dry, wet and MQL condition
- (2018) Niketh S. et al. Journal of Manufacturing Processes
- Cutting temperature and resulting influence on machining performance in rotary ultrasonic elliptical machining of thick CFRP
- (2017) Daxi Geng et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Heat transfer performance of MQL grinding with different nanofluids for Ni-based alloys using vegetable oil
- (2017) Benkai Li et al. JOURNAL OF CLEANER PRODUCTION
- Application of eco-friendly nanofluids during grinding of Inconel 718 through small quantity lubrication
- (2017) Manoj Kumar Sinha et al. JOURNAL OF CLEANER PRODUCTION
- Experimental evaluation of the lubrication performance of mixtures of castor oil with other vegetable oils in MQL grinding of nickel-based alloy
- (2017) Shuming Guo et al. JOURNAL OF CLEANER PRODUCTION
- Biodegradation and hard machining performance comparison of eco-friendly cutting fluid and mineral oil using flood cooling and minimum quantity cutting fluid techniques
- (2017) Kishor Kumar Gajrani et al. JOURNAL OF CLEANER PRODUCTION
- Specific energy and surface roughness of minimum quantity lubrication grinding Ni-based alloy with mixed vegetable oil-based nanofluids
- (2017) Dongzhou Jia et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Performance of Al2O3 nanofluids in minimum quantity lubrication in hard milling of 60Si2Mn steel using cemented carbide tools
- (2017) Duc Tran Minh et al. Advances in Mechanical Engineering
- Effect of the physical properties of different vegetable oil-based nanofluids on MQLC grinding temperature of Ni-based alloy
- (2016) Benkai Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Performance of water-based TiO 2 nanofluid during the minimum quantity lubrication machining of aluminium alloy, AA6061-T6
- (2016) M.S. Najiha et al. JOURNAL OF CLEANER PRODUCTION
- Performance evaluation of aluminium 6063 drilling under the influence of nanofluid minimum quantity lubrication
- (2016) Sukhpal Singh Chatha et al. JOURNAL OF CLEANER PRODUCTION
- Ultrasonic assisted grinding process with minimum quantity lubrication using oil-based nanofluids
- (2016) M.M. Molaie et al. JOURNAL OF CLEANER PRODUCTION
- Experimental evaluation of cooling performance by friction coefficient and specific friction energy in nanofluid minimum quantity lubrication grinding with different types of vegetable oil
- (2016) Yanbin Zhang et al. JOURNAL OF CLEANER PRODUCTION
- Micro-drilling of Ti–6Al–4V alloy: The effects of cooling/lubricating
- (2016) M. Perçin et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Experimental evaluation of the lubrication properties of the wheel/workpiece interface in MQL grinding with different nanofluids
- (2016) Yaogang Wang et al. TRIBOLOGY INTERNATIONAL
- An investigation on the tribological properties of multilayer graphene and MoS 2 nanosheets as additives used in hydraulic applications
- (2016) Jun Zhao et al. TRIBOLOGY INTERNATIONAL
- Tribological Performance of Silver Nanoparticle–Enhanced Polyethylene Glycol Lubricants
- (2016) Hamed Ghaednia et al. TRIBOLOGY TRANSACTIONS
- Metalworking fluids—Mechanisms and performance
- (2015) E. Brinksmeier et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Tribological properties of polyalphaolefin oil modified with nanocarbon additives
- (2015) N. Nunn et al. DIAMOND AND RELATED MATERIALS
- Performance evaluation of nanofluid MQL with vegetable-based oil and ester oil as base fluids in turning
- (2015) Yu Su et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Assessment of spray quality from an external mix nozzle and its impact on SQL grinding performance
- (2015) S. Shiva Sai et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Analyzing effects of cooling and lubrication conditions in micromilling of Ti6Al4V
- (2015) Elisa Vazquez et al. JOURNAL OF CLEANER PRODUCTION
- Machining and ecological effects of a new developed cutting fluid in combination with different cooling techniques on turning operation
- (2015) Yousef Shokoohi et al. JOURNAL OF CLEANER PRODUCTION
- Application of sustainable techniques in metal cutting for enhanced machinability: a review
- (2015) Chetan et al. JOURNAL OF CLEANER PRODUCTION
- Experimental evaluation of MoS2 nanoparticles in jet MQL grinding with different types of vegetable oil as base oil
- (2015) Yanbin Zhang et al. JOURNAL OF CLEANER PRODUCTION
- Multi-response optimization of minimum quantity lubrication parameters using Taguchi-based grey relational analysis in turning of difficult-to-cut alloy Haynes 25
- (2015) Murat Sarıkaya et al. JOURNAL OF CLEANER PRODUCTION
- Experimental investigation on removing cutting fluid from turning of Inconel 725 with coated carbide tools
- (2014) Ahmadreza Hosseini Tazehkandi et al. JOURNAL OF CLEANER PRODUCTION
- Environmental friendly cutting fluids and cooling techniques in machining: a review
- (2014) Sujan Debnath et al. JOURNAL OF CLEANER PRODUCTION
- Experimental investigation and optimization of cutting parameters in dry and wet machining of aluminum alloy 5083 in order to remove cutting fluid
- (2014) Behnam Davoodi et al. JOURNAL OF CLEANER PRODUCTION
- Hard turning using HiPIMS-coated carbide tools: Wear behavior under dry and minimum quantity lubrication (MQL)
- (2014) Satish Chinchanikar et al. MEASUREMENT
- Environmentally friendly manufacturing: Behavior analysis of minimum quantity of lubricant - MQL in grinding process
- (2013) Leonardo R. Silva et al. JOURNAL OF CLEANER PRODUCTION
- Investigation on the morphology of the machined surface in end milling of aerospace AL6061-T6 for novel uses of SiO2 nanolubrication system
- (2013) Mohd Sayuti et al. JOURNAL OF CLEANER PRODUCTION
- Tribological behavior of vegetable oil-based lubricants with nanoparticles of oxides in boundary lubrication conditions
- (2013) S.M. Alves et al. TRIBOLOGY INTERNATIONAL
- Investigating the effects of liquid atomization and delivery parameters of minimum quantity lubrication on the grinding process of Al2O3 engineering ceramics
- (2013) M. Emami et al. Journal of Manufacturing Processes
- A critical assessment of lubrication techniques in machining processes: a case for minimum quantity lubrication using vegetable oil-based lubricant
- (2012) Sunday Albert Lawal et al. JOURNAL OF CLEANER PRODUCTION
- Experimental investigations on machinability aspects in finish hard turning of AISI 4340 steel using uncoated and multilayer coated carbide inserts
- (2012) Ashok Kumar Sahoo et al. MEASUREMENT
- Experimental investigations on cryogenic cooling by liquid nitrogen in the end milling of hardened steel
- (2011) S. Ravi et al. CRYOGENICS
- Experimental characterization of micro-drilling process using nanofluid minimum quantity lubrication
- (2011) Jung Soo Nam et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Tribological Properties of Lubricating Oil-Based Nanofluids with Metal/Carbon Nanoparticles
- (2011) Cheol Choi et al. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY
- CU nanoparticles effect on the tribological properties of hydrosilicate powders as lubricant additive for steel–steel contacts
- (2011) Bao-Sen Zhang et al. TRIBOLOGY INTERNATIONAL
- Study of dry and minimum quantity lubrication drilling of novel austempered ductile iron (ADI) for automotive applications
- (2011) A. Meena et al. WEAR
- A study of plane surface grinding under minimum quantity lubrication (MQL) conditions
- (2010) L.M. Barczak et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Development of electrostatic solid lubrication system for improvement in machining process performance
- (2010) Narala Suresh Kumar Reddy et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Dry and minimum quantity lubrication drilling of cast magnesium alloy (AM60)
- (2010) Sukanta Bhowmick et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effect of cooling and lubrication conditions on surface topography and turning process of C45 steel
- (2010) Tadeusz Leppert INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Experimental evaluation of minimum quantity lubrication in near micro-milling
- (2010) Kuan-Ming Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Tribological behavior of polyalphaolefin with the addition of nickel nanoparticles
- (2010) R. Chou et al. TRIBOLOGY INTERNATIONAL
- The Effect of Morphology on the Tribological Properties of MoS2 in Liquid Paraffin
- (2010) Kun Hong Hu et al. TRIBOLOGY LETTERS
- An experimental investigation of the effects of workpiece and grinding parameters on minimum quantity lubrication—MQL grinding
- (2009) T. Tawakoli et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
Add your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload NowCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now