Multimaterial bioprinting and combination of processing techniques towards the fabrication of biomimetic tissues and organs

Highly osteogenic and mechanically strong nanofibrous scaffolds based on functionalized multi-walled carbon nanotubes-reinforced electrospun keratin/poly(ε-caprolactone)

(2021) Mahboobeh Mahmoodi et al.   Materials Today Communications

Mechanics of bioinspired functionally graded soft-hard composites made by multi-material 3D printing

(2020) M.J. Mirzaali et al.   COMPOSITE STRUCTURES

Direct-write 3D printing and characterization of a GelMA-based biomaterial for intracorporeal tissue engineering

(2020) Ali Asghari Adib et al.   Biofabrication

Engineering Tough, Injectable, Naturally Derived, Bioadhesive Composite Hydrogels

(2020) Maryam Tavafoghi et al.   Advanced Healthcare Materials

Development of a Disposable Single-Nozzle Printhead for 3D Bioprinting of Continuous Multi-Material Constructs

(2020) Tiffany Cameron et al.   Micromachines

Extrusion and Microfluidic‐Based Bioprinting to Fabricate Biomimetic Tissues and Organs

(2020) Elham Davoodi et al.   Advanced Materials Technologies

Crosslinking Strategies for 3D Bioprinting of Polymeric Hydrogels

(2020) Amin GhavamiNejad et al.   Small

Noninvasive in vivo 3D bioprinting

(2020) Yuwen Chen et al.   Science Advances

Generation of model tissues with dendritic vascular networks via sacrificial laser-sintered carbohydrate templates

(2020) Ian S. Kinstlinger et al.   Nature Biomedical Engineering

Intravital three-dimensional bioprinting

(2020) Anna Urciuolo et al.   Nature Biomedical Engineering

Vascular bioprinting with enzymatically degradable bioinks via multi-material projection-based stereolithography

(2020) Alexander Thomas et al.   Acta Biomaterialia

Xolography for linear volumetric 3D printing

(2020) Martin Regehly et al.   NATURE

A smart scaffold composed of three-dimensional printing and electrospinning techniques and its application in rat abdominal wall defects

(2020) Zhi Yang et al.   Stem Cell Research & Therapy

Recent advances in 3D bioprinting of musculoskeletal tissues

(2020) Tyler Potyondy et al.   Biofabrication

Advancing Frontiers in Bone Bioprinting

(2019) Nureddin Ashammakhi et al.   Advanced Healthcare Materials

In situ three-dimensional printing for reparative and regenerative therapy

(2019) Nureddin Ashammakhi et al.   BIOMEDICAL MICRODEVICES

3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts

(2019) Nadav Noor et al.   Advanced Science

Advances in Controlled Oxygen Generating Biomaterials for Tissue Engineering and Regenerative Therapy

(2019) Nureddin Ashammakhi et al.   BIOMACROMOLECULES

Digital manufacturing of advanced materials: Challenges and perspective

(2019) Linhan Lin et al.   Materials Today

3D bioprinting of collagen to rebuild components of the human heart

(2019) A. Lee et al.   SCIENCE

Bioprinting: 3D Bioprinting: from Benches to Translational Applications (Small 23/2019)

(2019) Marcel Alexander Heinrich et al.   Small

3D bioprinted endometrial stem cells on melt electrospun poly ε-caprolactone mesh for pelvic floor application promote anti-inflammatory responses in mice

(2019) Kallyanashis Paul et al.   Acta Biomaterialia

3D printing electrospinning fiber-reinforced decellularized extracellular matrix for cartilage regeneration

(2019) Weiming Chen et al.   CHEMICAL ENGINEERING JOURNAL

Key components of engineering vascularized 3-dimensional bioprinted bone constructs

(2019) Fahimeh Shahabipour et al.   Translational Research

3D bioprinted functional and contractile cardiac tissue constructs

(2018) Zhan Wang et al.   Acta Biomaterialia

Microfluidics-Enabled Multimaterial Maskless Stereolithographic Bioprinting

(2018) Amir K. Miri et al.   ADVANCED MATERIALS

Silicon-doped hydroxyapatite prepared by a thermal technique for hard tissue engineering applications

(2018) Maryam Tavafoghi et al.   CERAMICS INTERNATIONAL

Advances and future perspectives in 4D bioprinting

(2018) Nureddin Ashammakhi et al.   Biotechnology Journal

Bioprinting: Inkjet-Spray Hybrid Printing for 3D Freeform Fabrication of Multilayered Hydrogel Structures (Adv. Healthcare Mater. 14/2018)

(2018) Sejeong Yoon et al.   Advanced Healthcare Materials

Minimally Invasive and Regenerative Therapeutics

(2018) Nureddin Ashammakhi et al.   ADVANCED MATERIALS

Three-Dimensional Bioprinting Can Help Bone

(2017) Nureddin Ashammakhi et al.   JOURNAL OF CRANIOFACIAL SURGERY

In situ handheld three-dimensional bioprinting for cartilage regeneration

(2017) Claudia Di Bella et al.   Journal of Tissue Engineering and Regenerative Medicine

Drop-On-Drop Multimaterial 3D Bioprinting Realized by Peroxidase-Mediated Cross-Linking

(2017) Shinji Sakai et al.   MACROMOLECULAR RAPID COMMUNICATIONS

Three-Dimensional Bioprinting Strategies for Tissue Engineering

(2017) Yu Shrike Zhang et al.   Cold Spring Harbor Perspectives in Medicine

Combinational processing of 3D printing and electrospinning of hierarchical poly(lactic acid)/gelatin-forsterite scaffolds as a biocomposite: Mechanical and biological assessment

(2017) Saman Naghieh et al.   MATERIALS & DESIGN

Interplay between materials and microfluidics

(2017) Xu Hou et al.   Nature Reviews Materials

Coaxial 3D bioprinting of self-assembled multicellular heterogeneous tumor fibers

(2017) Xingliang Dai et al.   Scientific Reports

Rapid Continuous Multimaterial Extrusion Bioprinting

(2016) Wanjun Liu et al.   ADVANCED MATERIALS

A novel approach for precisely controlled multiple cell patterning in microfluidic chips by inkjet printing and the detection of drug metabolism and diffusion

(2016) Jie Zhang et al.   ANALYST

Current advances and future perspectives in extrusion-based bioprinting

(2016) Ibrahim T. Ozbolat et al.   BIOMATERIALS

Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip

(2016) Yu Shrike Zhang et al.   BIOMATERIALS

The role of amino acids in hydroxyapatite mineralization

(2016) M. Tavafoghi et al.   Journal of the Royal Society Interface

Hydroxyapatite formation on graphene oxide modified with amino acids: arginine versus glutamic acid

(2016) M. Tavafoghi et al.   Journal of the Royal Society Interface

A synergistic approach to the design, fabrication and evaluation of 3D printed micro and nano featured scaffolds for vascularized bone tissue repair

(2016) Benjamin Holmes et al.   NANOTECHNOLOGY

A 3D bioprinting system to produce human-scale tissue constructs with structural integrity

(2016) Hyun-Wook Kang et al.   NATURE BIOTECHNOLOGY

Deterministic encapsulation of single cells in thin tunable microgels for niche modelling and therapeutic delivery

(2016) Angelo S. Mao et al.   NATURE MATERIALS

Hyperelastic “bone”: A highly versatile, growth factor–free, osteoregenerative, scalable, and surgically friendly biomaterial

(2016) Adam E. Jakus et al.   Science Translational Medicine

A Review of Three-Dimensional Printing in Tissue Engineering

(2016) Nick A. Sears et al.   TISSUE ENGINEERING PART B-REVIEWS

Fabrication and characterization of electrospinning/3D printing bone tissue engineering scaffold

(2016) Yinxian Yu et al.   RSC Advances

Hierarchical Fabrication of Engineered Vascularized Bone Biphasic Constructs via Dual 3D Bioprinting: Integrating Regional Bioactive Factors into Architectural Design

(2016) Haitao Cui et al.   Advanced Healthcare Materials

A simultaneous 3D printing process for the fabrication of bioceramic and cell-laden hydrogel core/shell scaffolds with potential application in bone tissue regeneration

(2016) Naren Raja et al.   Journal of Materials Chemistry B

Bioprinting of 3D Convoluted Renal Proximal Tubules on Perfusable Chips

(2016) Kimberly A. Homan et al.   Scientific Reports

Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low-Viscosity Bioink

(2015) Cristina Colosi et al.   ADVANCED MATERIALS

Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks

(2015) James O. Hardin et al.   ADVANCED MATERIALS

3D Bioprinting Human Chondrocytes with Nanocellulose–Alginate Bioink for Cartilage Tissue Engineering Applications

(2015) Kajsa Markstedt et al.   BIOMACROMOLECULES

Three-dimensional bioprinting in tissue engineering and regenerative medicine

(2015) Guifang Gao et al.   BIOTECHNOLOGY LETTERS

Amino Acid/Ion Aggregate Formation and Their Role in Hydroxyapatite Precipitation

(2015) M. Tavafoghi Jahromi et al.   CRYSTAL GROWTH & DESIGN

Integrating biologically inspired nanomaterials and table-top stereolithography for 3D printed biomimetic osteochondral scaffolds

(2015) Nathan J. Castro et al.   Nanoscale

Active mixing of complex fluids at the microscale

(2015) Thomas J. Ober et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

High-Resolution Projection Microstereolithography for Patterning of Neovasculature

(2015) Ritu Raman et al.   Advanced Healthcare Materials

Controlling Shear Stress in 3D Bioprinting is a Key Factor to Balance Printing Resolution and Stem Cell Integrity

(2015) Andreas Blaeser et al.   Advanced Healthcare Materials

3D Printing of Scaffolds for Tissue Regeneration Applications

(2015) Anh-Vu Do et al.   Advanced Healthcare Materials

3D Bioprinting of Vascularized, Heterogeneous Cell-Laden Tissue Constructs

(2014) David B. Kolesky et al.   ADVANCED MATERIALS

Biomaterials for Integration with 3-D Bioprinting

(2014) Aleksander Skardal et al.   ANNALS OF BIOMEDICAL ENGINEERING

Bioprinting Technology: A Current State-of-the-Art Review

(2014) Amer B. Dababneh et al.   JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME

3D bioprinting of tissues and organs

(2014) Sean V Murphy et al.   NATURE BIOTECHNOLOGY

Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink

(2014) Falguni Pati et al.   Nature Communications

Rapid prototyping of chitosan-coated alginate scaffolds through the use of a 3D fiber deposition technique

(2014) Cristina Colosi et al.   Journal of Materials Chemistry B

Advanced tissue engineering scaffold design for regeneration of the complex hierarchical periodontal structure

(2013) Pedro F. Costa et al.   JOURNAL OF CLINICAL PERIODONTOLOGY

An additive manufacturing-based PCL-alginate-chondrocyte bioprinted scaffold for cartilage tissue engineering

(2013) Joydip Kundu et al.   Journal of Tissue Engineering and Regenerative Medicine

3D Printed Bionic Ears

(2013) Manu S. Mannoor et al.   NANO LETTERS

Metre-long cell-laden microfibres exhibit tissue morphologies and functions

(2013) Hiroaki Onoe et al.   NATURE MATERIALS

Biofabrication of multi-material anatomically shaped tissue constructs

(2013) Jetze Visser et al.   Biofabrication

Microfabrication of complex porous tissue engineering scaffolds using 3D projection stereolithography

(2012) Robert Gauvin et al.   BIOMATERIALS

Controlled formation of heterotypic hepatic micro-organoids in anisotropic hydrogel microfibers for long-term preservation of liver-specific functions

(2012) Masumi Yamada et al.   BIOMATERIALS

Skin tissue generation by laser cell printing

(2012) Lothar Koch et al.   BIOTECHNOLOGY AND BIOENGINEERING

Evaluation of hydrogels for bio-printing applications

(2012) Sean V. Murphy et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Bioprinting of a mechanically enhanced three-dimensional dual cell-laden construct for osteochondral tissue engineering using a multi-head tissue/organ building system

(2012) Jin-Hyung Shim et al.   JOURNAL OF MICROMECHANICS AND MICROENGINEERING

The importance of amino acid interactions in the crystallization of hydroxyapatite

(2012) M. T. Jahromi et al.   Journal of the Royal Society Interface

Toward engineering functional organ modules by additive manufacturing

(2012) Francoise Marga et al.   Biofabrication

Patterning human stem cells and endothelial cells with laser printing for cardiac regeneration

(2011) Ralf Gaebel et al.   BIOMATERIALS

Risk of Prion Disease Transmission through Bovine-Derived Bone Substitutes: A Systematic Review

(2011) Yeoungsug Kim et al.   Clinical Implant Dentistry and Related Research

Organ printing: from bioprinter to organ biofabrication line

(2011) Vladimir Mironov et al.   CURRENT OPINION IN BIOTECHNOLOGY

Direct-write bioprinting three-dimensional biohybrid systems for future regenerative therapies

(2011) Carlos C. Chang et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

Skeletal Tissue Regeneration: Current Approaches, Challenges, and Novel Reconstructive Strategies for an Aging Population

(2011) James Oliver Smith et al.   TISSUE ENGINEERING PART B-REVIEWS

Laser assisted bioprinting of engineered tissue with high cell density and microscale organization

(2010) Bertrand Guillotin et al.   BIOMATERIALS

Vascularization of Engineered Tissues: Approaches to Promote Angiogenesis in Biomaterials

(2008) Jennifer West et al.   CURRENT TOPICS IN MEDICINAL CHEMISTRY

Projection Microfabrication of Three-Dimensional Scaffolds for Tissue Engineering

(2008) Li-Hsin Han et al.   JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME

Advancing tissue engineering by using electrospun nanofibers

(2008) Nureddin Ashammakhi et al.   Regenerative Medicine

Three-Dimensional Fiber Deposition of Cell-Laden, Viable, Patterned Constructs for Bone Tissue Printing

(2008) Natalja E. Fedorovich et al.   TISSUE ENGINEERING PART A