Variability in stem taper surface topography affects the degree of corrosion and fretting in total hip arthroplasty
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Variability in stem taper surface topography affects the degree of corrosion and fretting in total hip arthroplasty
Authors
Keywords
-
Journal
Scientific Reports
Volume 11, Issue 1, Pages -
Publisher
Springer Science and Business Media LLC
Online
2021-04-30
DOI
10.1038/s41598-021-88234-3
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Taper junctions in modular hip joint replacements: What affects their stability?
- (2021) Ulrike Mueller et al. Journal of the Mechanical Behavior of Biomedical Materials
- Contact conditions for total hip head-neck modular taper junctions with microgrooved stem tapers
- (2020) Maren Bechstedt et al. JOURNAL OF BIOMECHANICS
- Micromotion at the head-stem taper junction of total hip prostheses is influenced by prosthesis design-, patient- and surgeon-related factors
- (2019) Adrian Falkenberg et al. JOURNAL OF BIOMECHANICS
- Trunnion corrosion in metal-on-polyethylene hip arthroplasty
- (2018) P. F. Lachiewicz et al. Bone & Joint Journal
- Trunnion corrosion
- (2018) J. R. Berstock et al. Bone & Joint Journal
- Revision for adverse local tissue reaction following metal-on-polyethylene total hip arthroplasty is associated with a high risk of early major complications
- (2018) H. B. Waterson et al. Bone & Joint Journal
- Material loss at the femoral head taper
- (2018) D. J. Langton et al. Bone & Joint Journal
- Same Same but Different? 12/14 Stem and Head Tapers in Total Hip Arthroplasty
- (2017) Ulrike Mueller et al. JOURNAL OF ARTHROPLASTY
- Do Stem Taper Microgrooves Influence Taper Corrosion in Total Hip Arthroplasty? A Matched Cohort Retrieval Study
- (2017) Christina M. Arnholt et al. JOURNAL OF ARTHROPLASTY
- Does a micro-grooved trunnion stem surface finish improve fixation and reduce fretting wear at the taper junction of total hip replacements? A finite element evaluation
- (2017) Ariyan Ashkanfar et al. JOURNAL OF BIOMECHANICS
- A large taper mismatch is one of the key factors behind high wear rates and failure at the taper junction of total hip replacements: A finite element wear analysis
- (2017) Ariyan Ashkanfar et al. Journal of the Mechanical Behavior of Biomedical Materials
- Reconciling in vivo and in vitro kinetics of the polymorphic transformation in zirconia-toughened alumina for hip joints: I. Phenomenology
- (2017) B. Sonny Bal et al. Materials Science & Engineering C-Materials for Biological Applications
- Effect of trunnion roughness and length on the modular taper junction strength under typical intraoperative assembly forces
- (2017) S.Y. Jauch-Matt et al. MEDICAL ENGINEERING & PHYSICS
- Retrieval analysis of metal and ceramic femoral heads on a single CoCr stem design
- (2017) A. Di Laura et al. Bone & Joint Research
- Ceramic Heads Decrease Metal Release Caused by Head-taper Fretting and Corrosion
- (2016) Sevi B. Kocagoz et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- Does Surface Topography Play a Role in Taper Damage in Head-neck Modular Junctions?
- (2016) Robin Pourzal et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- Revision total hip arthroplasty in the United States: national trends and in-hospital outcomes
- (2016) Brian E. Schwartz et al. INTERNATIONAL ORTHOPAEDICS
- Does Taper Size Have an Effect on Taper Damage in Retrieved Metal-on-Polyethylene Total Hip Devices?
- (2016) Genymphas B. Higgs et al. JOURNAL OF ARTHROPLASTY
- The effect of different assembly loads on taper junction fretting wear in total hip replacements
- (2016) Russell English et al. TRIBOLOGY INTERNATIONAL
- Corrosion at the head-neck interface of current designs of modular femoral components
- (2016) K. Osman et al. Bone & Joint Journal
- Increased Mortality in Metal-on-Metal versus Non-Metal-on-Metal Primary Total Hip Arthroplasty at 10 Years and Longer Follow-Up: A Systematic Review and Meta-Analysis
- (2016) B. G. Pijls et al. PLoS One
- Otto Aufranc Award: Large Heads Do Not Increase Damage at the Head-neck Taper of Metal-on-polyethylene Total Hip Arthroplasties
- (2015) Georgios K. Triantafyllopoulos et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- Basic Principles and Uniform Terminology for the Head-Neck Junction in Hip Replacement
- (2015) Paul H. Werner et al. Hip International
- Shorter, rough trunnion surfaces are associated with higher taper wear rates than longer, smooth trunnion surfaces in a contemporary large head metal-on-metal total hip arthroplasty system
- (2015) Timothy M. Brock et al. JOURNAL OF ORTHOPAEDIC RESEARCH
- Quantification of the Contact Area at the Head-Stem Taper Interface of Modular Hip Prostheses
- (2015) Florian Witt et al. PLoS One
- Head-Neck Taper Corrosion in Hip Arthroplasty
- (2015) S. Hussenbocus et al. Biomed Research International
- Modern Trunnions Are More Flexible: A Mechanical Analysis of THA Taper Designs
- (2014) David A. Porter et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- Variations in the trunnion surface topography between different commercially available hip replacement stems
- (2014) Selin Munir et al. JOURNAL OF ORTHOPAEDIC RESEARCH
- Taper Design Affects Failure of Large-head Metal-on-metal Total Hip Replacements
- (2013) Nader A. Nassif et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- Do Ceramic Femoral Heads Reduce Taper Fretting Corrosion in Hip Arthroplasty? A Retrieval Study
- (2013) Steven M. Kurtz et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- The Influence of Head Size on Corrosion and Fretting Behaviour at the Head-Neck Interface of Artificial Hip Joints
- (2013) Richard M.R. Dyrkacz et al. JOURNAL OF ARTHROPLASTY
- Is Increased Modularity Associated With Increased Fretting and Corrosion Damage in Metal-On-Metal Total Hip Arthroplasty Devices?
- (2013) Genymphas B. Higgs et al. JOURNAL OF ARTHROPLASTY
- The Reliability of a Scoring System for Corrosion and Fretting, and Its Relationship to Material Loss of Tapered, Modular Junctions of Retrieved Hip Implants
- (2013) Harry S. Hothi et al. JOURNAL OF ARTHROPLASTY
- Enhanced wear and corrosion in modular tapers in total hip replacement is associated with the contact area and surface topography
- (2013) Anna Panagiotidou et al. JOURNAL OF ORTHOPAEDIC RESEARCH
- Influence of assembly procedure and material combination on the strength of the taper connection at the head–neck junction of modular hip endoprostheses
- (2011) Annelie Rehmer et al. CLINICAL BIOMECHANICS
- Proximal Component Modularity in THA—At What Cost?: An Implant Retrieval Study
- (2011) A. M. Kop et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- Accelerating failure rate of the ASR total hip replacement
- (2011) D. J. Langton et al. JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME
- Strength and reliability of alumina ceramic femoral heads: Review of design, testing, and retrieval analysis
- (2010) Roland Huet et al. Journal of the Mechanical Behavior of Biomedical Materials
- In vivosevere corrosion and hydrogen embrittlement of retrieved modular body titanium alloy hip-implants
- (2008) Danieli C. Rodrigues et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
- (2008) M. Geetha et al. PROGRESS IN MATERIALS SCIENCE
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started