Taper junctions in modular hip joint replacements: What affects their stability?

Contact conditions for total hip head-neck modular taper junctions with microgrooved stem tapers

(2020) Maren Bechstedt et al.   JOURNAL OF BIOMECHANICS

Micromotion at the head-stem taper junction of total hip prostheses is influenced by prosthesis design-, patient- and surgeon-related factors

(2019) Adrian Falkenberg et al.   JOURNAL OF BIOMECHANICS

Maximizing the fixation strength of modular components by impaction without tissue damage

(2018) A. Krull et al.   Bone & Joint Research

Same Same but Different? 12/14 Stem and Head Tapers in Total Hip Arthroplasty

(2017) Ulrike Mueller et al.   JOURNAL OF ARTHROPLASTY

Ten-Year Cross-Sectional Study of Mechanically Assisted Crevice Corrosion in 1352 Consecutive Patients With Metal-on-Polyethylene Total Hip Arthroplasty

(2017) Daniel K. Hussey et al.   JOURNAL OF ARTHROPLASTY

Trunnion Failure of the Recalled Low Friction Ion Treatment Cobalt Chromium Alloy Femoral Head

(2017) Kenneth L. Urish et al.   JOURNAL OF ARTHROPLASTY

Effect of impact assembly on the interface deformation and fretting corrosion of modular hip tapers: An in vitro study

(2017) Anna Panagiotidou et al.   JOURNAL OF ORTHOPAEDIC RESEARCH

An adaptive finite element simulation of fretting wear damage at the head-neck taper junction of total hip replacement: The role of taper angle mismatch

(2017) Khosro Fallahnezhad et al.   Journal of the Mechanical Behavior of Biomedical Materials

A large taper mismatch is one of the key factors behind high wear rates and failure at the taper junction of total hip replacements: A finite element wear analysis

(2017) Ariyan Ashkanfar et al.   Journal of the Mechanical Behavior of Biomedical Materials

Flexural Rigidity, Taper Angle, and Contact Length Affect Fretting of the Femoral Stem Trunnion in Total Hip Arthroplasty

(2016) Ying-Ying J. Kao et al.   JOURNAL OF ARTHROPLASTY

The effect of different assembly loads on taper junction fretting wear in total hip replacements

(2016) Russell English et al.   TRIBOLOGY INTERNATIONAL

Basic Principles and Uniform Terminology for the Head-Neck Junction in Hip Replacement

(2015) Paul H. Werner et al.   Hip International

The Taper Disaster - How Could it Happen?

(2015) Michael M. Morlock   Hip International

A High Prevalence of Corrosion at the Head–Neck Taper with Contemporary Zimmer Non-Cemented Femoral Hip Components

(2015) Brian J. McGrory et al.   JOURNAL OF ARTHROPLASTY

Shorter, rough trunnion surfaces are associated with higher taper wear rates than longer, smooth trunnion surfaces in a contemporary large head metal-on-metal total hip arthroplasty system

(2015) Timothy M. Brock et al.   JOURNAL OF ORTHOPAEDIC RESEARCH

Influence of stem type on material loss at the metal-on-metal pinnacle taper junction

(2015) Harry S Hothi et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE

Finite element analysis of the head–neck taper interface of modular hip prostheses

(2015) R.M.R. Dyrkacz et al.   TRIBOLOGY INTERNATIONAL

Taperosis

(2015) C. Del Balso et al.   Bone & Joint Journal

What is the Trouble With Trunnions?

(2014) Christina I. Esposito et al.   CLINICAL ORTHOPAEDICS AND RELATED RESEARCH

The Relation Between Titanium Taper Corrosion and Cobalt-Chromium Bearing Wear in Large-Head Metal-on-Metal Total Hip Prostheses

(2014) F Witt et al.   JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME

Variations in the trunnion surface topography between different commercially available hip replacement stems

(2014) Selin Munir et al.   JOURNAL OF ORTHOPAEDIC RESEARCH

Taper Design Affects Failure of Large-head Metal-on-metal Total Hip Replacements

(2013) Nader A. Nassif et al.   CLINICAL ORTHOPAEDICS AND RELATED RESEARCH

Do Ceramic Femoral Heads Reduce Taper Fretting Corrosion in Hip Arthroplasty? A Retrieval Study

(2013) Steven M. Kurtz et al.   CLINICAL ORTHOPAEDICS AND RELATED RESEARCH

One hundred and fifty years of history of the Morse taper: from Stephen A. Morse in 1864 to complications related to modularity in hip arthroplasty

(2013) Philippe Hernigou et al.   INTERNATIONAL ORTHOPAEDICS

Taper junction failure in large-diameter metal-on-metal bearings

(2013) D. J. Langton et al.   Bone & Joint Research

Fretting corrosion of CoCrMo and Ti6Al4V interfaces

(2012) Viswanathan Swaminathan et al.   BIOMATERIALS

Corrosion at the Cone/Taper Interface Leads to Failure of Large-diameter Metal-on-metal Total Hip Arthroplasties

(2012) Heiko Meyer et al.   CLINICAL ORTHOPAEDICS AND RELATED RESEARCH

Corrosion at the Head-Neck Taper as a Cause for Adverse Local Tissue Reactions After Total Hip Arthroplasty

(2012) H John Cooper et al.   JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME

The tribological difference between biomedical steels and CoCrMo-alloys

(2012) Alfons Fischer et al.   Journal of the Mechanical Behavior of Biomedical Materials

Influence of assembly procedure and material combination on the strength of the taper connection at the head–neck junction of modular hip endoprostheses

(2011) Annelie Rehmer et al.   CLINICAL BIOMECHANICS

Femoral Stem Fracture and In Vivo Corrosion of Retrieved Modular Femoral Hips

(2011) J. Caitlin Huot Carlson et al.   JOURNAL OF ARTHROPLASTY

Accelerating failure rate of the ASR total hip replacement

(2011) D. J. Langton et al.   JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME

“Asymptomatic” Pseudotumors After Metal-on-Metal Hip Resurfacing Arthroplasty

(2010) Young-Min Kwon et al.   JOURNAL OF ARTHROPLASTY

Impact magnitudes applied by surgeons and their importance when applying the femoral head onto the Morse taper for total hip arthroplasty

(2008) Jake P. Heiney et al.   ARCHIVES OF ORTHOPAEDIC AND TRAUMA SURGERY