Variability in stem taper surface topography affects the degree of corrosion and fretting in total hip arthroplasty
出版年份 2021 全文链接
标题
Variability in stem taper surface topography affects the degree of corrosion and fretting in total hip arthroplasty
作者
关键词
-
出版物
Scientific Reports
Volume 11, Issue 1, Pages -
出版商
Springer Science and Business Media LLC
发表日期
2021-04-30
DOI
10.1038/s41598-021-88234-3
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Taper junctions in modular hip joint replacements: What affects their stability?
- (2021) Ulrike Mueller et al. Journal of the Mechanical Behavior of Biomedical Materials
- Contact conditions for total hip head-neck modular taper junctions with microgrooved stem tapers
- (2020) Maren Bechstedt et al. JOURNAL OF BIOMECHANICS
- Micromotion at the head-stem taper junction of total hip prostheses is influenced by prosthesis design-, patient- and surgeon-related factors
- (2019) Adrian Falkenberg et al. JOURNAL OF BIOMECHANICS
- Trunnion corrosion in metal-on-polyethylene hip arthroplasty
- (2018) P. F. Lachiewicz et al. Bone & Joint Journal
- Trunnion corrosion
- (2018) J. R. Berstock et al. Bone & Joint Journal
- Revision for adverse local tissue reaction following metal-on-polyethylene total hip arthroplasty is associated with a high risk of early major complications
- (2018) H. B. Waterson et al. Bone & Joint Journal
- Material loss at the femoral head taper
- (2018) D. J. Langton et al. Bone & Joint Journal
- Same Same but Different? 12/14 Stem and Head Tapers in Total Hip Arthroplasty
- (2017) Ulrike Mueller et al. JOURNAL OF ARTHROPLASTY
- Do Stem Taper Microgrooves Influence Taper Corrosion in Total Hip Arthroplasty? A Matched Cohort Retrieval Study
- (2017) Christina M. Arnholt et al. JOURNAL OF ARTHROPLASTY
- Does a micro-grooved trunnion stem surface finish improve fixation and reduce fretting wear at the taper junction of total hip replacements? A finite element evaluation
- (2017) Ariyan Ashkanfar et al. JOURNAL OF BIOMECHANICS
- A large taper mismatch is one of the key factors behind high wear rates and failure at the taper junction of total hip replacements: A finite element wear analysis
- (2017) Ariyan Ashkanfar et al. Journal of the Mechanical Behavior of Biomedical Materials
- Reconciling in vivo and in vitro kinetics of the polymorphic transformation in zirconia-toughened alumina for hip joints: I. Phenomenology
- (2017) B. Sonny Bal et al. Materials Science & Engineering C-Materials for Biological Applications
- Effect of trunnion roughness and length on the modular taper junction strength under typical intraoperative assembly forces
- (2017) S.Y. Jauch-Matt et al. MEDICAL ENGINEERING & PHYSICS
- Retrieval analysis of metal and ceramic femoral heads on a single CoCr stem design
- (2017) A. Di Laura et al. Bone & Joint Research
- Ceramic Heads Decrease Metal Release Caused by Head-taper Fretting and Corrosion
- (2016) Sevi B. Kocagoz et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- Does Surface Topography Play a Role in Taper Damage in Head-neck Modular Junctions?
- (2016) Robin Pourzal et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- Revision total hip arthroplasty in the United States: national trends and in-hospital outcomes
- (2016) Brian E. Schwartz et al. INTERNATIONAL ORTHOPAEDICS
- Does Taper Size Have an Effect on Taper Damage in Retrieved Metal-on-Polyethylene Total Hip Devices?
- (2016) Genymphas B. Higgs et al. JOURNAL OF ARTHROPLASTY
- The effect of different assembly loads on taper junction fretting wear in total hip replacements
- (2016) Russell English et al. TRIBOLOGY INTERNATIONAL
- Corrosion at the head-neck interface of current designs of modular femoral components
- (2016) K. Osman et al. Bone & Joint Journal
- Increased Mortality in Metal-on-Metal versus Non-Metal-on-Metal Primary Total Hip Arthroplasty at 10 Years and Longer Follow-Up: A Systematic Review and Meta-Analysis
- (2016) B. G. Pijls et al. PLoS One
- Otto Aufranc Award: Large Heads Do Not Increase Damage at the Head-neck Taper of Metal-on-polyethylene Total Hip Arthroplasties
- (2015) Georgios K. Triantafyllopoulos et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- Basic Principles and Uniform Terminology for the Head-Neck Junction in Hip Replacement
- (2015) Paul H. Werner et al. Hip International
- Shorter, rough trunnion surfaces are associated with higher taper wear rates than longer, smooth trunnion surfaces in a contemporary large head metal-on-metal total hip arthroplasty system
- (2015) Timothy M. Brock et al. JOURNAL OF ORTHOPAEDIC RESEARCH
- Quantification of the Contact Area at the Head-Stem Taper Interface of Modular Hip Prostheses
- (2015) Florian Witt et al. PLoS One
- Head-Neck Taper Corrosion in Hip Arthroplasty
- (2015) S. Hussenbocus et al. Biomed Research International
- Modern Trunnions Are More Flexible: A Mechanical Analysis of THA Taper Designs
- (2014) David A. Porter et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- Variations in the trunnion surface topography between different commercially available hip replacement stems
- (2014) Selin Munir et al. JOURNAL OF ORTHOPAEDIC RESEARCH
- Taper Design Affects Failure of Large-head Metal-on-metal Total Hip Replacements
- (2013) Nader A. Nassif et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- Do Ceramic Femoral Heads Reduce Taper Fretting Corrosion in Hip Arthroplasty? A Retrieval Study
- (2013) Steven M. Kurtz et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- The Influence of Head Size on Corrosion and Fretting Behaviour at the Head-Neck Interface of Artificial Hip Joints
- (2013) Richard M.R. Dyrkacz et al. JOURNAL OF ARTHROPLASTY
- Is Increased Modularity Associated With Increased Fretting and Corrosion Damage in Metal-On-Metal Total Hip Arthroplasty Devices?
- (2013) Genymphas B. Higgs et al. JOURNAL OF ARTHROPLASTY
- The Reliability of a Scoring System for Corrosion and Fretting, and Its Relationship to Material Loss of Tapered, Modular Junctions of Retrieved Hip Implants
- (2013) Harry S. Hothi et al. JOURNAL OF ARTHROPLASTY
- Enhanced wear and corrosion in modular tapers in total hip replacement is associated with the contact area and surface topography
- (2013) Anna Panagiotidou et al. JOURNAL OF ORTHOPAEDIC RESEARCH
- Influence of assembly procedure and material combination on the strength of the taper connection at the head–neck junction of modular hip endoprostheses
- (2011) Annelie Rehmer et al. CLINICAL BIOMECHANICS
- Proximal Component Modularity in THA—At What Cost?: An Implant Retrieval Study
- (2011) A. M. Kop et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- Accelerating failure rate of the ASR total hip replacement
- (2011) D. J. Langton et al. JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME
- Strength and reliability of alumina ceramic femoral heads: Review of design, testing, and retrieval analysis
- (2010) Roland Huet et al. Journal of the Mechanical Behavior of Biomedical Materials
- In vivosevere corrosion and hydrogen embrittlement of retrieved modular body titanium alloy hip-implants
- (2008) Danieli C. Rodrigues et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
- (2008) M. Geetha et al. PROGRESS IN MATERIALS SCIENCE
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started