Machinability of Inconel 718: A critical review on the impact of cutting temperatures
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Machinability of Inconel 718: A critical review on the impact of cutting temperatures
Authors
Keywords
-
Journal
MATERIALS AND MANUFACTURING PROCESSES
Volume 36, Issue 7, Pages 753-791
Publisher
Informa UK Limited
Online
2021-03-22
DOI
10.1080/10426914.2020.1843671
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Metal cutting lubricants and cutting tools: a review on the performance improvement and sustainability assessment
- (2020) Ali H. Abdelrazek et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Inconel 718 machining performance evaluation using indigenously developed hybrid machining facilities: experimental investigation and sustainability assessment
- (2020) Navneet Khanna et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Study of the effect of surface laser texture on tribological properties of cemented carbide materials
- (2020) Na Zhang et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Tribological Behavior and Abrasion Resistant Mechanism of Laser Micro-Bulge Texturing Surface under Full Oil Lubrication
- (2020) Xijun Hua et al. TRIBOLOGY TRANSACTIONS
- Surface Quality and Free Energy Evaluation of s275 Steel by Shot Blasting, Abrasive Water Jet Texturing and Laser Surface Texturing
- (2020) Fermin Bañon et al. Metals
- Evaluation of tool wear, surface roughness/topography and chip morphology when machining of Ni-based alloy 625 under MQL, cryogenic cooling and CryoMQL
- (2020) Çağrı Vakkas Yıldırım et al. Journal of Materials Research and Technology-JMR&T
- Optimization of Performance Parameters and Mechanism of Bionic Texture on Friction Surface
- (2020) Qimin Hou et al. Coatings
- Comparative evaluation of soybean oil–based MQL flow rates and emulsion flood cooling strategy in high-speed face milling of Inconel 718
- (2020) Anthony Chukwujekwu Okafor et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Machining performance evaluation of Ti6Al4V alloy with laser textured tools under MQL and nano-MQL environments
- (2020) Sarvesh Kumar Mishra et al. Journal of Manufacturing Processes
- Laser surface texturing and related techniques for enhancing tribological performance of engineering materials: A review
- (2020) Bo Mao et al. Journal of Manufacturing Processes
- Evaluation of tool wear, energy consumption, and surface roughness during turning of inconel 718 using sustainable machining technique
- (2020) Navneet Khanna et al. Journal of Materials Research and Technology-JMR&T
- Study on the performances of the drilling process of nickel-based superalloy Inconel 718 with differently micro-textured drilling tools
- (2020) Kang Pang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Investigation of micro-textured cutting tools used for face turning of alloy 718 with high-pressure cooling
- (2019) Nageswaran Tamil Alagan et al. Journal of Manufacturing Processes
- Performance of Microtextured Tools Fabricated by Inductively Coupled Plasma Etching in Dry Cutting Tests on Medium Carbon Steel Workpieces
- (2019) Yunsong Lian et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Machinability analysis of high strength materials with Cryo-Treated textured tungsten carbide inserts
- (2019) D. Palanisamy et al. MATERIALS AND MANUFACTURING PROCESSES
- Machinability improvement in Inconel-718 by enhanced tribological and thermal environment using textured tool
- (2019) Chetan Darshan et al. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
- Cutting performance and crack self-healing mechanism of a novel ceramic cutting tool in dry and high-speed machining of Inconel 718
- (2019) Bin Zhao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A thermomechanical analysis leading to a novel flank face design providing longer tool lives for tools used in the drilling of Inconel 718
- (2019) Ekrem Oezkaya et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Performance parameters studies in machining of AISI D2 steel with dot-textured, groove-textured & non-textured cutting tool at the flank face
- (2019) Sanjib Kr Rajbongshi et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Study of saw-tooth chip in machining of Inconel 718 by metallographic technique
- (2019) Bikash Chandra Behera et al. MACHINING SCIENCE AND TECHNOLOGY
- Influence of dry and solid lubricant-assisted MQL cooling conditions on the machinability of Inconel 718 alloy with textured tool
- (2019) Chetan Darshan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of process parameters on the cutting performance of SiAlON ceramic tools during high-speed dry face milling of hardened Inconel 718
- (2019) F. Molaiekiya et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Modulated ultrasonic elliptical vibration cutting for ductile-regime texturing of brittle materials with 2-D combined resonant and non-resonant vibrations
- (2019) Jianjian Wang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Continuous and ordered surface microtexturing on Cu and Ni-based alloys by novel electrochemical dissolution
- (2019) H.S. Maharana et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of novel hybrid texture tool on turning process performance in MQL machining of Inconel 718 superalloy
- (2019) P. Sivaiah et al. MATERIALS AND MANUFACTURING PROCESSES
- Fractal characterization of surface microtexture of Ti6Al4V subjected to ultrasonic vibration assisted milling
- (2019) Bo Zhao et al. ULTRASONICS
- A study on machinability of nickel based superalloy using micro-textured tungsten carbide cutting tools
- (2019) M Adam Khan et al. Materials Research Express
- Effects of cutting parameters and tool nose radius on surface roughness and work hardening during dry turning Inconel 718
- (2018) Yang Hua et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Modeling of plastic deformation induced by thermo-mechanical stresses considering tool flank wear in high-speed machining Ti-6Al-4V
- (2018) Xiaoliang Liang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- 3D finite element investigations on textured tools with different geometrical shapes for dry machining of titanium alloys
- (2018) Sarvesh Kumar Mishra et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Experimental and numerical investigation of thermal loads in Inocnel 718 machining
- (2018) Farshid Jafarian et al. MATERIALS AND MANUFACTURING PROCESSES
- Characterization and machining performance of laser-textured chevron shaped tools coated with AlTiN and AlCrN coatings
- (2018) Sarvesh Kumar Mishra et al. SURFACE & COATINGS TECHNOLOGY
- Investigation of tool wear in the turning of Inconel 718 superalloy in terms of process performance and productivity enhancement
- (2018) W. Grzesik et al. TRIBOLOGY INTERNATIONAL
- The effects of cutting conditions on cutting temperature and hole quality in drilling of Inconel 718 using solid carbide drills
- (2018) Necati Uçak et al. Journal of Manufacturing Processes
- Surface residual stress in high speed cutting of superalloy Inconel718 based on multiscale simulation
- (2018) YiHang Fan et al. Journal of Manufacturing Processes
- Experimental Evaluation on Grinding Texture on Flank Face in Chamfer Milling of Stainless Steel
- (2018) Xian-Li Liu et al. Chinese Journal of Mechanical Engineering
- Performance of surface-textured end-mill insert on AISI 1045 steel
- (2018) Veerasimman Arumugaprabu et al. MATERIALS AND MANUFACTURING PROCESSES
- Investigation of Cutting Temperature during Turning Inconel 718 with (Ti,Al)N PVD Coated Cemented Carbide Tools
- (2018) Jinfu Zhao et al. Materials
- Performance of alumina-based ceramic inserts in high-speed machining of nimonic 80A
- (2018) Vishwanath Chavan et al. MATERIALS AND MANUFACTURING PROCESSES
- Influence of wire-EDM textured conventional tungsten carbide inserts in machining of aerospace materials (Ti–6Al–4V alloy)
- (2018) Natarajan Manikandan et al. MATERIALS AND MANUFACTURING PROCESSES
- Experimental Investigation of Concave and Convex Micro-Textures for Improving Anti-Adhesion Property of Cutting Tool in Dry Finish Cutting
- (2018) Zhengyang Kang et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Experimental study on the cutting temperature of textured carbide tool embedded with graphite
- (2017) Wenlong Song et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Wear mechanisms during dry and wet turning of Inconel 718 with ceramic tools
- (2017) Rodrigo P. Zeilmann et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental investigations on effects of tool flank wear on surface integrity during orthogonal dry cutting of Ti-6Al-4V
- (2017) Xiaoliang Liang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Sustainability in machining: “Eco-friendly” turning of Inconel 718. Surface characterisation and economic analysis
- (2017) Vincenzo Tebaldo et al. JOURNAL OF CLEANER PRODUCTION
- Sustainability analysis of lubricant oils for minimum quantity lubrication based on their tribo-rheological performance
- (2017) O. Pereira et al. JOURNAL OF CLEANER PRODUCTION
- Characterization of tool wear when machining alloy 718 with high-pressure cooling using conventional and surface-modified WC–Co tools
- (2017) P. Hoier et al. Journal of Superhard Materials
- Experimental investigation on high-efficiency grinding of Inconel 718 with heat pipe grinding wheel
- (2017) Jiajia Chen et al. MACHINING SCIENCE AND TECHNOLOGY
- Modeling subsurface deformation induced by machining of Inconel 718
- (2017) M. Agmell et al. MACHINING SCIENCE AND TECHNOLOGY
- Development of a novel cubic boron nitride cutting tool with a textured flank face for high-speed machining of Inconel 718
- (2017) Tatsuya Sugihara et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Temperature Measurement and Numerical Prediction in Machining Inconel 718
- (2017) José Díaz-Álvarez et al. SENSORS
- Effects of micro textured sapphire tool regarding cutting forces in turning operations
- (2017) Yuan Wei et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Effect on friction reduction of micro/nano hierarchical patterns on sapphire wafers
- (2017) Miru Kim et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- The thermal modeling of deep-hole drilling process under MQL condition
- (2017) A.T. Kuzu et al. Journal of Manufacturing Processes
- A comparative study of recent lubri-coolant strategies for turning of Ni-based superalloy
- (2017) Bikash Chandra Behera et al. Journal of Manufacturing Processes
- Influence of a High-Pressure Lubricoolant Supply on Thermo-Mechanical Tool Load and Tool Wear Behaviour in the Turning of Aerospace Materials
- (2017) F Klocke et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Surface Texture Manufacturing Techniques and Tribological Effect of Surface Texturing on Cutting Tool Performance: A Review
- (2016) A. Arslan et al. CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES
- Tool wear appearance and failure mechanism of coated carbide tools in micro-milling of Inconel 718 super alloy
- (2016) Xiaohong Lu et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Accurate determination of damaged subsurface layers in machined Inconel 718
- (2016) Heithem Touazine et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Potential of alternative lubrication strategies for metal cutting processes: a review
- (2016) Muhammed Nadeem Sharif et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A review on the progress towards improvement in surface integrity of Inconel 718 under high pressure and flood cooling conditions
- (2016) Aziz UI Hassan Mohsan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of cutting parameters on work hardening behavior of surface layer during turning superalloy Inconel 718
- (2016) Xiaoping Ren et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- State-of-the-art in surface integrity in machining of nickel-based super alloys
- (2016) A. Thakur et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Recent advances in turning with textured cutting tools: A review
- (2016) Varun Sharma et al. JOURNAL OF CLEANER PRODUCTION
- Finite element modeling of micro-milling: Numerical simulation and experimental validation
- (2016) İrfan Ucun et al. MACHINING SCIENCE AND TECHNOLOGY
- Magnetorheological fluid-based nanotexturing of tool inserts for turning of duplex stainless steel
- (2016) M. Thiyagu et al. MATERIALS AND MANUFACTURING PROCESSES
- Effects of high-pressure cooling on the wear patterns on turning inserts used on alloy IN718
- (2016) A. Suárez et al. MATERIALS AND MANUFACTURING PROCESSES
- Surface Integrity and Structural Stability of Broached Inconel 718 at High Temperatures
- (2016) Z. Chen et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Enhancing material performance through laser surface texturing: a review
- (2016) J. A. Wahab et al. TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING
- Study of electrically-assisted indentation for surface texturing
- (2016) Hyun-Seok Oh et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- An investigation on surface burn during grinding of Inconel 718
- (2016) Manoj Kumar Sinha et al. Journal of Manufacturing Processes
- Effect of microscale texture on cutting performance of WC/Co-based TiAlN coated tools under different lubrication conditions
- (2015) Kedong Zhang et al. APPLIED SURFACE SCIENCE
- High performance cutting of advanced aerospace alloys and composite materials
- (2015) Rachid M'Saoubi et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Fabrication of texturing tool to produce array of square holes for EDM by abrasive water jet machining
- (2015) Vijay Kumar Pal et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Application of sustainable techniques in metal cutting for enhanced machinability: a review
- (2015) Chetan et al. JOURNAL OF CLEANER PRODUCTION
- Modified microscale pattern transfer without photolithography of substrates
- (2015) N.S. Qu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Study on surface defects in milling Inconel 718 super alloy
- (2015) Chang Liu et al. Journal of Mechanical Science and Technology
- Evaluation of machining performance in cryogenic machining of Inconel 718 and comparison with dry and MQL machining
- (2014) Yusuf Kaynak INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Temperature variation in the workpiece and in the cutting tool when dry milling Inconel 718
- (2014) G. Le Coz et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Finite element simulation of machining Inconel 718 alloy including microstructure changes
- (2014) F. Jafarian et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Performance of the micro-texture self-lubricating and pulsating heat pipe self-cooling tools in dry cutting process
- (2014) Ze Wu et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- EXPERIMENTAL INVESTIGATION ON SURFACE INTEGRITY OF END MILLING NICKEL-BASED ALLOY—INCONEL 718
- (2014) Xiaojiang Cai et al. MACHINING SCIENCE AND TECHNOLOGY
- Material Response at Tool–Chip Interface and Its Effects on Tool Wear in Turning Inconel718
- (2014) Yi Hang Fan et al. MATERIALS AND MANUFACTURING PROCESSES
- Investigation on Some Machinability Aspects of Inconel 825 During Dry Turning
- (2014) A. Thakur et al. MATERIALS AND MANUFACTURING PROCESSES
- Machining Characteristics of Inconel 718 by Sinking-EDM and Wire-EDM
- (2014) L. Li et al. MATERIALS AND MANUFACTURING PROCESSES
- Effect of Machining Parameters on Surface Integrity in High Speed Milling of Super Alloy GH4169/Inconel 718
- (2014) Waseem Akhtar et al. MATERIALS AND MANUFACTURING PROCESSES
- Improving the Localization of Surface Texture by Electrochemical Machining with Auxiliary Anode
- (2014) Shuangqing Qian et al. MATERIALS AND MANUFACTURING PROCESSES
- Influence of Tool Materials on Machinability of Titanium- and Nickel-Based Alloys: A Review
- (2014) Salman Pervaiz et al. MATERIALS AND MANUFACTURING PROCESSES
- Effect of cutting speed and CVD multilayer coating on machinability of Inconel 825
- (2014) A. Thakur et al. SURFACE ENGINEERING
- Cutting performance and wear characteristics of Al2O3/TiC ceramic cutting tools with WS2/Zr soft-coatings and nano-textures in dry cutting
- (2014) Youqiang Xing et al. WEAR
- Study on the cutting force of cylindrical turning with novel restricted contact tools
- (2013) W. J. Deng et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Investigation of surface integrity in dry machining of Inconel 718
- (2013) Domenico Umbrello INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of cutting speed on cutting forces and wear mechanisms in high-speed face milling of Inconel 718 with Sialon ceramic tools
- (2013) Xianhua Tian et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Comparison of tool wear mechanisms and surface integrity for dry and wet micro-drilling of nickel-base superalloys
- (2013) Muhammad Imran et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Sustainable machining through increasing the cutting tool utilization
- (2013) Fredrik Schultheiss et al. JOURNAL OF CLEANER PRODUCTION
- EFFECTS OF CUTTING SPEED WHEN TURNING AGE HARDENEDINCONEL 718WITH PCBN TOOLS OF BINDERLESS AND LOW-CBN GRADES
- (2013) Volodymyr Bushlya et al. MACHINING SCIENCE AND TECHNOLOGY
- Experiment investigation of superfine deep hole drilling mechanism for high temperature alloy 718
- (2013) Z. F. Liu et al. MATERIALS RESEARCH INNOVATIONS
- Crater and flank wear resistance of cutting tools having micro textured surfaces
- (2013) Tatsuya Sugihara et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- An experimental investigation of tribological performance of triangular textures in water lubrication regime
- (2013) Yi Xie et al. Science China-Physics Mechanics & Astronomy
- Performance of the self-lubricating textured tools in dry cutting of Ti-6Al-4V
- (2012) Wu Ze et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Research on surface integrity of grinding Inconel718
- (2012) C. F. Yao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids
- (2012) A. Shokrani et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions
- (2012) S. Zhang et al. JOURNAL OF CLEANER PRODUCTION
- Some Investigations on High Speed Dry Machining of Aerospace Material Inconel 718 Using Multicoated Carbide Inserts
- (2012) D. G. Thakur et al. MATERIALS AND MANUFACTURING PROCESSES
- Cutting Parameter Optimization Based on Optimal Cutting Temperature in Machining Inconel718
- (2012) Zhao-Peng Hao et al. MATERIALS AND MANUFACTURING PROCESSES
- Friction characteristics of microtextured surfaces under mixed and hydrodynamic lubrication
- (2012) Ashwin Ramesh et al. TRIBOLOGY INTERNATIONAL
- New observations on tool wear mechanism in dry machining Inconel718
- (2011) Zhaopeng Hao et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Application of vegetable oil-based metalworking fluids in machining ferrous metals—A review
- (2011) S.A. Lawal et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Performance of carbide tools with textured rake-face filled with solid lubricants in dry cutting processes
- (2011) Deng Jianxin et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Investigation of machining performance in high pressure jet assisted turning of Inconel 718: A numerical model
- (2011) C. Courbon et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Dry machining of Inconel 718, workpiece surface integrity
- (2011) A. Devillez et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Tool life and surface integrity when milling inconel 718 with coated cemented carbide tools
- (2011) Chun‐Pao Kuo et al. JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS
- MECHANISM OF CHIP FORMATION IN HIGH-SPEED TURNING OF INCONEL 718
- (2011) R. S. Pawade et al. MACHINING SCIENCE AND TECHNOLOGY
- Performance of PVD-Coated Carbide Tools When Turning Inconel 718 in Dry Machining
- (2011) Gusri Akhyar Ibrahim et al. Advances in Mechanical Engineering
- Investigation and optimization of lubrication parameters in high speed turning of superalloy Inconel 718
- (2010) Dinesh G. Thakur et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Evaluation of surface integrity in micro drilling process for nickel-based superalloy
- (2010) Muhammad Imran et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of high-pressure cooling on life of SiAlON tools in machining of Inconel 718
- (2010) Zydrunas Vagnorius et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Machining induced surface integrity in titanium and nickel alloys: A review
- (2010) Durul Ulutan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Tool wear, chip formation and workpiece surface issues in CBN hard turning: A review
- (2010) Manu Dogra et al. International Journal of Precision Engineering and Manufacturing
- Transitioning to sustainable production – part II: evaluation of sustainable machining technologies
- (2010) Franci Pusavec et al. JOURNAL OF CLEANER PRODUCTION
- Effect of geometrical parameters in micro-grooved crosshatch pattern under lubricated sliding friction
- (2010) Min-soo Suh et al. TRIBOLOGY INTERNATIONAL
- Minor cutting edge–workpiece interactions in drilling of an advanced nickel-based superalloy
- (2009) J. Kwong et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Investigation of machining performance in high-pressure jet assisted turning of Inconel 718: An experimental study
- (2009) C. Courbon et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Residual stresses in face finish turning of high strength nickel-based superalloy
- (2009) W. Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Casting metal microstructures from a flexible and reusable mold
- (2009) Andrew H Cannon et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING
- RESIDUAL STRESSES ON INCONEL 718 TURBINE SHAFT SAMPLES AFTER TURNING
- (2009) T. Berruti et al. MACHINING SCIENCE AND TECHNOLOGY
- SURFACE INTEGRITY CHARACTERIZATION AND PREDICTION IN MACHINING OF HARDENED AND DIFFICULT-TO-MACHINE ALLOYS: A STATE-OF-ART RESEARCH REVIEW AND ANALYSIS
- (2009) Y. B. Guo et al. MACHINING SCIENCE AND TECHNOLOGY
- A Study on the Parameters in High-Speed Turning of Superalloy Inconel 718
- (2009) D. G. Thakur et al. MATERIALS AND MANUFACTURING PROCESSES
- Wear mechanisms of WC coated and uncoated tools in finish turning of Inconel 718
- (2009) Abhay Bhatt et al. TRIBOLOGY INTERNATIONAL
- Analysis of residual stresses induced by dry turning of difficult-to-machine materials
- (2008) J.C. Outeiro et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- A comparative study of the cutting forces in high speed machining of Ti–6Al–4V and Inconel 718 with a round cutting edge tool
- (2008) N. Fang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Study on the machinability characteristics of superalloy Inconel 718 during high speed turning
- (2008) D.G. Thakur et al. MATERIALS & DESIGN
- Development of cutting tools with microscale and nanoscale textures to improve frictional behavior
- (2008) Noritaka Kawasegi et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Surface integrity and tool life when turning Inconel 718 using ultra-high pressure and flood coolant systems
- (2008) A R C Sharman et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Effect of machining parameters and cutting edge geometry on surface integrity of high-speed turned Inconel 718
- (2007) R.S. Pawade et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Tool life and surface integrity aspects when drilling and hole making in Inconel 718
- (2007) A.R.C. Sharman et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Behaviors of end milling Inconel 718 superalloy by cemented carbide tools
- (2007) Y.S. Liao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now