Machinability of Inconel 718: A critical review on the impact of cutting temperatures
出版年份 2021 全文链接
标题
Machinability of Inconel 718: A critical review on the impact of cutting temperatures
作者
关键词
-
出版物
MATERIALS AND MANUFACTURING PROCESSES
Volume 36, Issue 7, Pages 753-791
出版商
Informa UK Limited
发表日期
2021-03-22
DOI
10.1080/10426914.2020.1843671
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Metal cutting lubricants and cutting tools: a review on the performance improvement and sustainability assessment
- (2020) Ali H. Abdelrazek et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Inconel 718 machining performance evaluation using indigenously developed hybrid machining facilities: experimental investigation and sustainability assessment
- (2020) Navneet Khanna et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Study of the effect of surface laser texture on tribological properties of cemented carbide materials
- (2020) Na Zhang et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Tribological Behavior and Abrasion Resistant Mechanism of Laser Micro-Bulge Texturing Surface under Full Oil Lubrication
- (2020) Xijun Hua et al. TRIBOLOGY TRANSACTIONS
- Surface Quality and Free Energy Evaluation of s275 Steel by Shot Blasting, Abrasive Water Jet Texturing and Laser Surface Texturing
- (2020) Fermin Bañon et al. Metals
- Evaluation of tool wear, surface roughness/topography and chip morphology when machining of Ni-based alloy 625 under MQL, cryogenic cooling and CryoMQL
- (2020) Çağrı Vakkas Yıldırım et al. Journal of Materials Research and Technology-JMR&T
- Optimization of Performance Parameters and Mechanism of Bionic Texture on Friction Surface
- (2020) Qimin Hou et al. Coatings
- Comparative evaluation of soybean oil–based MQL flow rates and emulsion flood cooling strategy in high-speed face milling of Inconel 718
- (2020) Anthony Chukwujekwu Okafor et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Machining performance evaluation of Ti6Al4V alloy with laser textured tools under MQL and nano-MQL environments
- (2020) Sarvesh Kumar Mishra et al. Journal of Manufacturing Processes
- Laser surface texturing and related techniques for enhancing tribological performance of engineering materials: A review
- (2020) Bo Mao et al. Journal of Manufacturing Processes
- Evaluation of tool wear, energy consumption, and surface roughness during turning of inconel 718 using sustainable machining technique
- (2020) Navneet Khanna et al. Journal of Materials Research and Technology-JMR&T
- Study on the performances of the drilling process of nickel-based superalloy Inconel 718 with differently micro-textured drilling tools
- (2020) Kang Pang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Investigation of micro-textured cutting tools used for face turning of alloy 718 with high-pressure cooling
- (2019) Nageswaran Tamil Alagan et al. Journal of Manufacturing Processes
- Performance of Microtextured Tools Fabricated by Inductively Coupled Plasma Etching in Dry Cutting Tests on Medium Carbon Steel Workpieces
- (2019) Yunsong Lian et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Machinability analysis of high strength materials with Cryo-Treated textured tungsten carbide inserts
- (2019) D. Palanisamy et al. MATERIALS AND MANUFACTURING PROCESSES
- Machinability improvement in Inconel-718 by enhanced tribological and thermal environment using textured tool
- (2019) Chetan Darshan et al. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
- Cutting performance and crack self-healing mechanism of a novel ceramic cutting tool in dry and high-speed machining of Inconel 718
- (2019) Bin Zhao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A thermomechanical analysis leading to a novel flank face design providing longer tool lives for tools used in the drilling of Inconel 718
- (2019) Ekrem Oezkaya et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Performance parameters studies in machining of AISI D2 steel with dot-textured, groove-textured & non-textured cutting tool at the flank face
- (2019) Sanjib Kr Rajbongshi et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Study of saw-tooth chip in machining of Inconel 718 by metallographic technique
- (2019) Bikash Chandra Behera et al. MACHINING SCIENCE AND TECHNOLOGY
- Influence of dry and solid lubricant-assisted MQL cooling conditions on the machinability of Inconel 718 alloy with textured tool
- (2019) Chetan Darshan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of process parameters on the cutting performance of SiAlON ceramic tools during high-speed dry face milling of hardened Inconel 718
- (2019) F. Molaiekiya et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Modulated ultrasonic elliptical vibration cutting for ductile-regime texturing of brittle materials with 2-D combined resonant and non-resonant vibrations
- (2019) Jianjian Wang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Continuous and ordered surface microtexturing on Cu and Ni-based alloys by novel electrochemical dissolution
- (2019) H.S. Maharana et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of novel hybrid texture tool on turning process performance in MQL machining of Inconel 718 superalloy
- (2019) P. Sivaiah et al. MATERIALS AND MANUFACTURING PROCESSES
- Fractal characterization of surface microtexture of Ti6Al4V subjected to ultrasonic vibration assisted milling
- (2019) Bo Zhao et al. ULTRASONICS
- A study on machinability of nickel based superalloy using micro-textured tungsten carbide cutting tools
- (2019) M Adam Khan et al. Materials Research Express
- Effects of cutting parameters and tool nose radius on surface roughness and work hardening during dry turning Inconel 718
- (2018) Yang Hua et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Modeling of plastic deformation induced by thermo-mechanical stresses considering tool flank wear in high-speed machining Ti-6Al-4V
- (2018) Xiaoliang Liang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- 3D finite element investigations on textured tools with different geometrical shapes for dry machining of titanium alloys
- (2018) Sarvesh Kumar Mishra et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Experimental and numerical investigation of thermal loads in Inocnel 718 machining
- (2018) Farshid Jafarian et al. MATERIALS AND MANUFACTURING PROCESSES
- Characterization and machining performance of laser-textured chevron shaped tools coated with AlTiN and AlCrN coatings
- (2018) Sarvesh Kumar Mishra et al. SURFACE & COATINGS TECHNOLOGY
- Investigation of tool wear in the turning of Inconel 718 superalloy in terms of process performance and productivity enhancement
- (2018) W. Grzesik et al. TRIBOLOGY INTERNATIONAL
- The effects of cutting conditions on cutting temperature and hole quality in drilling of Inconel 718 using solid carbide drills
- (2018) Necati Uçak et al. Journal of Manufacturing Processes
- Surface residual stress in high speed cutting of superalloy Inconel718 based on multiscale simulation
- (2018) YiHang Fan et al. Journal of Manufacturing Processes
- Experimental Evaluation on Grinding Texture on Flank Face in Chamfer Milling of Stainless Steel
- (2018) Xian-Li Liu et al. Chinese Journal of Mechanical Engineering
- Performance of surface-textured end-mill insert on AISI 1045 steel
- (2018) Veerasimman Arumugaprabu et al. MATERIALS AND MANUFACTURING PROCESSES
- Investigation of Cutting Temperature during Turning Inconel 718 with (Ti,Al)N PVD Coated Cemented Carbide Tools
- (2018) Jinfu Zhao et al. Materials
- Performance of alumina-based ceramic inserts in high-speed machining of nimonic 80A
- (2018) Vishwanath Chavan et al. MATERIALS AND MANUFACTURING PROCESSES
- Influence of wire-EDM textured conventional tungsten carbide inserts in machining of aerospace materials (Ti–6Al–4V alloy)
- (2018) Natarajan Manikandan et al. MATERIALS AND MANUFACTURING PROCESSES
- Experimental Investigation of Concave and Convex Micro-Textures for Improving Anti-Adhesion Property of Cutting Tool in Dry Finish Cutting
- (2018) Zhengyang Kang et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Experimental study on the cutting temperature of textured carbide tool embedded with graphite
- (2017) Wenlong Song et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Wear mechanisms during dry and wet turning of Inconel 718 with ceramic tools
- (2017) Rodrigo P. Zeilmann et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental investigations on effects of tool flank wear on surface integrity during orthogonal dry cutting of Ti-6Al-4V
- (2017) Xiaoliang Liang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Sustainability in machining: “Eco-friendly” turning of Inconel 718. Surface characterisation and economic analysis
- (2017) Vincenzo Tebaldo et al. JOURNAL OF CLEANER PRODUCTION
- Sustainability analysis of lubricant oils for minimum quantity lubrication based on their tribo-rheological performance
- (2017) O. Pereira et al. JOURNAL OF CLEANER PRODUCTION
- Characterization of tool wear when machining alloy 718 with high-pressure cooling using conventional and surface-modified WC–Co tools
- (2017) P. Hoier et al. Journal of Superhard Materials
- Experimental investigation on high-efficiency grinding of Inconel 718 with heat pipe grinding wheel
- (2017) Jiajia Chen et al. MACHINING SCIENCE AND TECHNOLOGY
- Modeling subsurface deformation induced by machining of Inconel 718
- (2017) M. Agmell et al. MACHINING SCIENCE AND TECHNOLOGY
- Development of a novel cubic boron nitride cutting tool with a textured flank face for high-speed machining of Inconel 718
- (2017) Tatsuya Sugihara et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Temperature Measurement and Numerical Prediction in Machining Inconel 718
- (2017) José Díaz-Álvarez et al. SENSORS
- Effects of micro textured sapphire tool regarding cutting forces in turning operations
- (2017) Yuan Wei et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Effect on friction reduction of micro/nano hierarchical patterns on sapphire wafers
- (2017) Miru Kim et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- The thermal modeling of deep-hole drilling process under MQL condition
- (2017) A.T. Kuzu et al. Journal of Manufacturing Processes
- A comparative study of recent lubri-coolant strategies for turning of Ni-based superalloy
- (2017) Bikash Chandra Behera et al. Journal of Manufacturing Processes
- Influence of a High-Pressure Lubricoolant Supply on Thermo-Mechanical Tool Load and Tool Wear Behaviour in the Turning of Aerospace Materials
- (2017) F Klocke et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Surface Texture Manufacturing Techniques and Tribological Effect of Surface Texturing on Cutting Tool Performance: A Review
- (2016) A. Arslan et al. CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES
- Tool wear appearance and failure mechanism of coated carbide tools in micro-milling of Inconel 718 super alloy
- (2016) Xiaohong Lu et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Accurate determination of damaged subsurface layers in machined Inconel 718
- (2016) Heithem Touazine et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Potential of alternative lubrication strategies for metal cutting processes: a review
- (2016) Muhammed Nadeem Sharif et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A review on the progress towards improvement in surface integrity of Inconel 718 under high pressure and flood cooling conditions
- (2016) Aziz UI Hassan Mohsan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of cutting parameters on work hardening behavior of surface layer during turning superalloy Inconel 718
- (2016) Xiaoping Ren et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- State-of-the-art in surface integrity in machining of nickel-based super alloys
- (2016) A. Thakur et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Recent advances in turning with textured cutting tools: A review
- (2016) Varun Sharma et al. JOURNAL OF CLEANER PRODUCTION
- Finite element modeling of micro-milling: Numerical simulation and experimental validation
- (2016) İrfan Ucun et al. MACHINING SCIENCE AND TECHNOLOGY
- Magnetorheological fluid-based nanotexturing of tool inserts for turning of duplex stainless steel
- (2016) M. Thiyagu et al. MATERIALS AND MANUFACTURING PROCESSES
- Effects of high-pressure cooling on the wear patterns on turning inserts used on alloy IN718
- (2016) A. Suárez et al. MATERIALS AND MANUFACTURING PROCESSES
- Surface Integrity and Structural Stability of Broached Inconel 718 at High Temperatures
- (2016) Z. Chen et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Enhancing material performance through laser surface texturing: a review
- (2016) J. A. Wahab et al. TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING
- Study of electrically-assisted indentation for surface texturing
- (2016) Hyun-Seok Oh et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- An investigation on surface burn during grinding of Inconel 718
- (2016) Manoj Kumar Sinha et al. Journal of Manufacturing Processes
- Effect of microscale texture on cutting performance of WC/Co-based TiAlN coated tools under different lubrication conditions
- (2015) Kedong Zhang et al. APPLIED SURFACE SCIENCE
- High performance cutting of advanced aerospace alloys and composite materials
- (2015) Rachid M'Saoubi et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Fabrication of texturing tool to produce array of square holes for EDM by abrasive water jet machining
- (2015) Vijay Kumar Pal et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Application of sustainable techniques in metal cutting for enhanced machinability: a review
- (2015) Chetan et al. JOURNAL OF CLEANER PRODUCTION
- Modified microscale pattern transfer without photolithography of substrates
- (2015) N.S. Qu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Study on surface defects in milling Inconel 718 super alloy
- (2015) Chang Liu et al. Journal of Mechanical Science and Technology
- Evaluation of machining performance in cryogenic machining of Inconel 718 and comparison with dry and MQL machining
- (2014) Yusuf Kaynak INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Temperature variation in the workpiece and in the cutting tool when dry milling Inconel 718
- (2014) G. Le Coz et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Finite element simulation of machining Inconel 718 alloy including microstructure changes
- (2014) F. Jafarian et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Performance of the micro-texture self-lubricating and pulsating heat pipe self-cooling tools in dry cutting process
- (2014) Ze Wu et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- EXPERIMENTAL INVESTIGATION ON SURFACE INTEGRITY OF END MILLING NICKEL-BASED ALLOY—INCONEL 718
- (2014) Xiaojiang Cai et al. MACHINING SCIENCE AND TECHNOLOGY
- Material Response at Tool–Chip Interface and Its Effects on Tool Wear in Turning Inconel718
- (2014) Yi Hang Fan et al. MATERIALS AND MANUFACTURING PROCESSES
- Investigation on Some Machinability Aspects of Inconel 825 During Dry Turning
- (2014) A. Thakur et al. MATERIALS AND MANUFACTURING PROCESSES
- Machining Characteristics of Inconel 718 by Sinking-EDM and Wire-EDM
- (2014) L. Li et al. MATERIALS AND MANUFACTURING PROCESSES
- Effect of Machining Parameters on Surface Integrity in High Speed Milling of Super Alloy GH4169/Inconel 718
- (2014) Waseem Akhtar et al. MATERIALS AND MANUFACTURING PROCESSES
- Improving the Localization of Surface Texture by Electrochemical Machining with Auxiliary Anode
- (2014) Shuangqing Qian et al. MATERIALS AND MANUFACTURING PROCESSES
- Influence of Tool Materials on Machinability of Titanium- and Nickel-Based Alloys: A Review
- (2014) Salman Pervaiz et al. MATERIALS AND MANUFACTURING PROCESSES
- Effect of cutting speed and CVD multilayer coating on machinability of Inconel 825
- (2014) A. Thakur et al. SURFACE ENGINEERING
- Cutting performance and wear characteristics of Al2O3/TiC ceramic cutting tools with WS2/Zr soft-coatings and nano-textures in dry cutting
- (2014) Youqiang Xing et al. WEAR
- Study on the cutting force of cylindrical turning with novel restricted contact tools
- (2013) W. J. Deng et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Investigation of surface integrity in dry machining of Inconel 718
- (2013) Domenico Umbrello INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of cutting speed on cutting forces and wear mechanisms in high-speed face milling of Inconel 718 with Sialon ceramic tools
- (2013) Xianhua Tian et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Comparison of tool wear mechanisms and surface integrity for dry and wet micro-drilling of nickel-base superalloys
- (2013) Muhammad Imran et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Sustainable machining through increasing the cutting tool utilization
- (2013) Fredrik Schultheiss et al. JOURNAL OF CLEANER PRODUCTION
- EFFECTS OF CUTTING SPEED WHEN TURNING AGE HARDENEDINCONEL 718WITH PCBN TOOLS OF BINDERLESS AND LOW-CBN GRADES
- (2013) Volodymyr Bushlya et al. MACHINING SCIENCE AND TECHNOLOGY
- Experiment investigation of superfine deep hole drilling mechanism for high temperature alloy 718
- (2013) Z. F. Liu et al. MATERIALS RESEARCH INNOVATIONS
- Crater and flank wear resistance of cutting tools having micro textured surfaces
- (2013) Tatsuya Sugihara et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- An experimental investigation of tribological performance of triangular textures in water lubrication regime
- (2013) Yi Xie et al. Science China-Physics Mechanics & Astronomy
- Performance of the self-lubricating textured tools in dry cutting of Ti-6Al-4V
- (2012) Wu Ze et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Research on surface integrity of grinding Inconel718
- (2012) C. F. Yao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids
- (2012) A. Shokrani et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions
- (2012) S. Zhang et al. JOURNAL OF CLEANER PRODUCTION
- Some Investigations on High Speed Dry Machining of Aerospace Material Inconel 718 Using Multicoated Carbide Inserts
- (2012) D. G. Thakur et al. MATERIALS AND MANUFACTURING PROCESSES
- Cutting Parameter Optimization Based on Optimal Cutting Temperature in Machining Inconel718
- (2012) Zhao-Peng Hao et al. MATERIALS AND MANUFACTURING PROCESSES
- Friction characteristics of microtextured surfaces under mixed and hydrodynamic lubrication
- (2012) Ashwin Ramesh et al. TRIBOLOGY INTERNATIONAL
- New observations on tool wear mechanism in dry machining Inconel718
- (2011) Zhaopeng Hao et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Application of vegetable oil-based metalworking fluids in machining ferrous metals—A review
- (2011) S.A. Lawal et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Performance of carbide tools with textured rake-face filled with solid lubricants in dry cutting processes
- (2011) Deng Jianxin et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Investigation of machining performance in high pressure jet assisted turning of Inconel 718: A numerical model
- (2011) C. Courbon et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Dry machining of Inconel 718, workpiece surface integrity
- (2011) A. Devillez et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Tool life and surface integrity when milling inconel 718 with coated cemented carbide tools
- (2011) Chun‐Pao Kuo et al. JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS
- MECHANISM OF CHIP FORMATION IN HIGH-SPEED TURNING OF INCONEL 718
- (2011) R. S. Pawade et al. MACHINING SCIENCE AND TECHNOLOGY
- Performance of PVD-Coated Carbide Tools When Turning Inconel 718 in Dry Machining
- (2011) Gusri Akhyar Ibrahim et al. Advances in Mechanical Engineering
- Investigation and optimization of lubrication parameters in high speed turning of superalloy Inconel 718
- (2010) Dinesh G. Thakur et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Evaluation of surface integrity in micro drilling process for nickel-based superalloy
- (2010) Muhammad Imran et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of high-pressure cooling on life of SiAlON tools in machining of Inconel 718
- (2010) Zydrunas Vagnorius et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Machining induced surface integrity in titanium and nickel alloys: A review
- (2010) Durul Ulutan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Tool wear, chip formation and workpiece surface issues in CBN hard turning: A review
- (2010) Manu Dogra et al. International Journal of Precision Engineering and Manufacturing
- Transitioning to sustainable production – part II: evaluation of sustainable machining technologies
- (2010) Franci Pusavec et al. JOURNAL OF CLEANER PRODUCTION
- Effect of geometrical parameters in micro-grooved crosshatch pattern under lubricated sliding friction
- (2010) Min-soo Suh et al. TRIBOLOGY INTERNATIONAL
- Minor cutting edge–workpiece interactions in drilling of an advanced nickel-based superalloy
- (2009) J. Kwong et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Investigation of machining performance in high-pressure jet assisted turning of Inconel 718: An experimental study
- (2009) C. Courbon et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Residual stresses in face finish turning of high strength nickel-based superalloy
- (2009) W. Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Casting metal microstructures from a flexible and reusable mold
- (2009) Andrew H Cannon et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING
- RESIDUAL STRESSES ON INCONEL 718 TURBINE SHAFT SAMPLES AFTER TURNING
- (2009) T. Berruti et al. MACHINING SCIENCE AND TECHNOLOGY
- SURFACE INTEGRITY CHARACTERIZATION AND PREDICTION IN MACHINING OF HARDENED AND DIFFICULT-TO-MACHINE ALLOYS: A STATE-OF-ART RESEARCH REVIEW AND ANALYSIS
- (2009) Y. B. Guo et al. MACHINING SCIENCE AND TECHNOLOGY
- A Study on the Parameters in High-Speed Turning of Superalloy Inconel 718
- (2009) D. G. Thakur et al. MATERIALS AND MANUFACTURING PROCESSES
- Wear mechanisms of WC coated and uncoated tools in finish turning of Inconel 718
- (2009) Abhay Bhatt et al. TRIBOLOGY INTERNATIONAL
- Analysis of residual stresses induced by dry turning of difficult-to-machine materials
- (2008) J.C. Outeiro et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- A comparative study of the cutting forces in high speed machining of Ti–6Al–4V and Inconel 718 with a round cutting edge tool
- (2008) N. Fang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Study on the machinability characteristics of superalloy Inconel 718 during high speed turning
- (2008) D.G. Thakur et al. MATERIALS & DESIGN
- Development of cutting tools with microscale and nanoscale textures to improve frictional behavior
- (2008) Noritaka Kawasegi et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Surface integrity and tool life when turning Inconel 718 using ultra-high pressure and flood coolant systems
- (2008) A R C Sharman et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Effect of machining parameters and cutting edge geometry on surface integrity of high-speed turned Inconel 718
- (2007) R.S. Pawade et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Tool life and surface integrity aspects when drilling and hole making in Inconel 718
- (2007) A.R.C. Sharman et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Behaviors of end milling Inconel 718 superalloy by cemented carbide tools
- (2007) Y.S. Liao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search