Transient Cavitation and Friction-Induced Heating Effects of Diesel Fuel during the Needle Valve Early Opening Stages for Discharge Pressures up to 450 MPa
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Transient Cavitation and Friction-Induced Heating Effects of Diesel Fuel during the Needle Valve Early Opening Stages for Discharge Pressures up to 450 MPa
Authors
Keywords
-
Journal
Energies
Volume 14, Issue 10, Pages 2923
Publisher
MDPI AG
Online
2021-05-19
DOI
10.3390/en14102923
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Numerical simulation of fuel dribbling and nozzle wall wetting
- (2021) Manolis Gavaises et al. International Journal of Engine Research
- An analytical model of diesel injector’s needle valve eccentric motion
- (2021) Chuqiao Wang et al. International Journal of Engine Research
- Influence of Diesel Fuel Viscosity on Cavitating Throttle Flow Simulations under Erosive Operation Conditions
- (2020) Marco Cristofaro et al. ACS Omega
- An experimental study of a very high-pressure diesel injector (up to 5000 bar) by means of optical diagnostics
- (2020) W. Vera-Tudela et al. FUEL
- High pressure/high temperature multiphase simulations of dodecane injection to nitrogen: Application on ECN Spray-A
- (2020) Phoevos Koukouvinis et al. FUEL
- Preferential cavitation and friction-induced heating of multi-component Diesel fuel surrogates up to 450MPa
- (2020) Alvaro Vidal et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Modelling and prediction of cavitation erosion in GDi injectors operated with E100 fuel
- (2020) Eduardo Gomez Santos et al. FUEL
- The effects of fuel–air mixing and injector dribble on diesel unburned hydrocarbon emissions
- (2019) Chad P Koci et al. International Journal of Engine Research
- High-Temperature, High-Pressure Viscosities and Densities of n-Hexadecane, 2,2,4,4,6,8,8-Heptamethylnonane, and Squalane Measured Using a Universal Calibration for a Rolling-Ball Viscometer/Densimeter
- (2019) Aaron J. Rowane et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Entropy scaling based viscosity predictions for hydrocarbon mixtures and diesel fuels up to extreme conditions
- (2019) Houman B. Rokni et al. FUEL
- Cavitation induction by projectile impacting on a water jet
- (2019) E. Stavropoulos Vasilakis et al. INTERNATIONAL JOURNAL OF MULTIPHASE FLOW
- General method for prediction of thermal conductivity for well-characterized hydrocarbon mixtures and fuels up to extreme conditions using entropy scaling
- (2019) Houman B. Rokni et al. FUEL
- A numerical study on the effect of cavitation erosion in a Diesel injector
- (2019) Marco Cristofaro et al. APPLIED MATHEMATICAL MODELLING
- Effect of injection pressure and ambient density on spray characteristics of diesel and biodiesel surrogate fuels
- (2019) Meshack Hawi et al. FUEL
- Effect of Composition, Temperature, and Pressure on the Viscosities and Densities of Three Diesel Fuels
- (2019) Aaron J. Rowane et al. JOURNAL OF CHEMICAL AND ENGINEERING DATA
- Complex multicomponent real-fluid thermodynamic model for high-pressure Diesel fuel injection
- (2019) C. Rodriguez et al. FUEL
- Investigation of cavitation and air entrainment during pilot injection in real-size multi-hole diesel nozzles
- (2019) Eduardo Gomez Santos et al. FUEL
- Simulations on the cavitating flow and corresponding risk of erosion in diesel injector nozzles with double array holes
- (2018) Liang Zhang et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Parametric Investigations of the Induced Shear Stress by a Laser-Generated Bubble
- (2018) Phoevos Koukouvinis et al. LANGMUIR
- Modelling cavitation during drop impact on solid surfaces
- (2018) Nikolaos Kyriazis et al. ADVANCES IN COLLOID AND INTERFACE SCIENCE
- Modelling of Diesel fuel properties through its surrogates using Perturbed-Chain, Statistical Associating Fluid Theory
- (2018) Alvaro Vidal et al. International Journal of Engine Research
- Purely predictive method for density, compressibility, and expansivity for hydrocarbon mixtures and diesel and jet fuels up to high temperatures and pressures
- (2018) Houman B. Rokni et al. FUEL
- A Study of the Organized in-Cylinder Motion by a Dynamic Adaptive Scale-Resolving Turbulence Model
- (2017) Y. Wu et al. FLOW TURBULENCE AND COMBUSTION
- An arbitrary Lagrangian-Eulerian framework with exact mass conservation for the numerical simulation of 2D rising bubble problem
- (2017) Cagatay Guventurk et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Prediction of cavitation and induced erosion inside a high-pressure fuel pump
- (2017) Phoevos Koukouvinis et al. International Journal of Engine Research
- Effects of micro-hole nozzle and ultra-high injection pressure on air entrainment, liquid penetration, flame lift-off and soot formation of diesel spray flame
- (2017) Keiya Nishida et al. International Journal of Engine Research
- Numerical investigation of bubble dynamics using tabulated data
- (2017) Nikolaos Kyriazis et al. INTERNATIONAL JOURNAL OF MULTIPHASE FLOW
- Large Eddy Simulation of Diesel injector including cavitation effects and correlation to erosion damage
- (2016) Phoevos Koukouvinis et al. FUEL
- Large-Eddy Simulation of turbulent, cavitating fuel flow inside a 9-hole Diesel injector including needle movement
- (2016) Felix Örley et al. International Journal of Engine Research
- Modeling of surface cleaning by cavitation bubble dynamics and collapse
- (2016) Georges L. Chahine et al. ULTRASONICS SONOCHEMISTRY
- Experimental and numerical study of lift-off length and ignition delay of a two-component diesel surrogate
- (2015) Raúl Payri et al. FUEL
- Transient heating effects in high pressure Diesel injector nozzles
- (2015) George Strotos et al. INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW
- Friction-induced heating in nozzle hole micro-channels under extreme fuel pressurisation
- (2014) Andreas Theodorakakos et al. FUEL
- An investigation of transient nature of the cavitating flow in injector nozzles
- (2013) Zhixia He et al. APPLIED THERMAL ENGINEERING
- Numerical analysis of injector flow and spray characteristics from diesel injectors using fossil and biodiesel fuels
- (2011) Michele Battistoni et al. APPLIED ENERGY
- Liquid length and vapor penetration of conventional, Fischer–Tropsch, coal-derived, and surrogate fuel sprays at high-temperature and high-pressure ambient conditions
- (2011) Sanghoon Kook et al. FUEL
- Flame lift-off length and soot production of oxygenated fuels in relation with ignition delay in a DI heavy-duty diesel engine
- (2010) A.J. Donkerbroek et al. COMBUSTION AND FLAME
- A moving mesh generation strategy for solving an injector internal flow problem
- (2010) Xandra Margot et al. MATHEMATICAL AND COMPUTER MODELLING
- Flow in valve covered orifice nozzles with cylindrical and tapered holes and link to cavitation erosion and engine exhaust emissions
- (2008) M Gavaises International Journal of Engine Research
- Experimental comparison of soot formation in turbulent flames of Diesel and surrogate Diesel fuels
- (2008) R. Lemaire et al. PROCEEDINGS OF THE COMBUSTION INSTITUTE
- Diesel nozzle geometry influence on spray liquid-phase fuel penetration in evaporative conditions
- (2007) R. Payri et al. FUEL
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started