Numerical simulation of fuel dribbling and nozzle wall wetting

Influence of Diesel Fuel Viscosity on Cavitating Throttle Flow Simulations under Erosive Operation Conditions

(2020) Marco Cristofaro et al.   ACS Omega

High pressure/high temperature multiphase simulations of dodecane injection to nitrogen: Application on ECN Spray-A

(2020) Phoevos Koukouvinis et al.   FUEL

Entropy scaling based viscosity predictions for hydrocarbon mixtures and diesel fuels up to extreme conditions

(2019) Houman B. Rokni et al.   FUEL

The process of tip wetting at the spray injection end

(2019) Jérôme Hélie et al.   International Journal of Engine Research

First observation and characterization of vortex flow in steel micronozzles for high-pressure diesel injection

(2019) Seoksu Moon et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

General method for prediction of thermal conductivity for well-characterized hydrocarbon mixtures and fuels up to extreme conditions using entropy scaling

(2019) Houman B. Rokni et al.   FUEL

Quantitative analysis of dribble volumes and rates using three-dimensional reconstruction of X-ray and diffused back-illumination images of diesel sprays

(2019) Vitaliy Sechenyh et al.   International Journal of Engine Research

Numerical simulation of three-phase flow in an external gear pump using immersed boundary approach

(2019) Murali-Girija Mithun et al.   APPLIED MATHEMATICAL MODELLING

IJER editorial: The future of the internal combustion engine

(2019) R D Reitz et al.   International Journal of Engine Research

Investigation of cavitation and air entrainment during pilot injection in real-size multi-hole diesel nozzles

(2019) Eduardo Gomez Santos et al.   FUEL

High-speed visualization of vortical cavitation using synchrotron radiation

(2018) Ioannis K. Karathanassis et al.   JOURNAL OF FLUID MECHANICS

Turbulence and Cavitation Suppression by Quaternary Ammonium Salt Additives

(2018) Homa Naseri et al.   Scientific Reports

Numerical simulation of cavitation and atomization using a fully compressible three-phase model

(2018) Murali-Girija Mithun et al.   Physical Review Fluids

Illustrating the effect of viscoelastic additives on cavitation and turbulence with X-ray imaging

(2018) I. K. Karathanassis et al.   Scientific Reports

Purely predictive method for density, compressibility, and expansivity for hydrocarbon mixtures and diesel and jet fuels up to high temperatures and pressures

(2018) Houman B. Rokni et al.   FUEL

Hole number effect on spray dynamics of multi-hole diesel nozzles: An observation from three- to nine-hole nozzles

(2018) Weidi Huang et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Eccentric needle motion effect on near-nozzle dynamics of diesel spray

(2017) Weidi Huang et al.   FUEL

Experimental Study of Diesel-Fuel Droplet Impact on a Similarly Sized Polished Spherical Heated Solid Particle

(2017) Hesamaldin Jadidbonab et al.   LANGMUIR

Unveiling the physical mechanism behind pistol shrimp cavitation

(2017) Phoevos Koukouvinis et al.   Scientific Reports

End-of-injection fuel dribble of multi-hole diesel injector: Comprehensive investigation of phenomenon and discussion on control strategy

(2016) Seoksu Moon et al.   APPLIED ENERGY

Large Eddy Simulation of Diesel injector including cavitation effects and correlation to erosion damage

(2016) Phoevos Koukouvinis et al.   FUEL

Large-Eddy Simulation of turbulent, cavitating fuel flow inside a 9-hole Diesel injector including needle movement

(2016) Felix Örley et al.   International Journal of Engine Research

Performance of turbulence and cavitation models in prediction of incipient and developed cavitation

(2016) Phoevos Koukouvinis et al.   International Journal of Engine Research

Predicting the evaporation rate of stationary droplets with the VOF methodology for a wide range of ambient temperature conditions

(2016) George Strotos et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Transient heating effects in high pressure Diesel injector nozzles

(2015) George Strotos et al.   INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW

VOF simulations of the contact angle dynamics during the drop spreading: Standard models and a new wetting force model

(2014) Ilias Malgarinos et al.   ADVANCES IN COLLOID AND INTERFACE SCIENCE

A computational investigation on the influence of the use of elliptical orifices on the inner nozzle flow and cavitation development in diesel injector nozzles

(2014) S. Molina et al.   ENERGY CONVERSION AND MANAGEMENT

Friction-induced heating in nozzle hole micro-channels under extreme fuel pressurisation

(2014) Andreas Theodorakakos et al.   FUEL

Instantaneous and ensemble average cavitation structures in Diesel micro-channel flow orifices

(2013) Nicholas Mitroglou et al.   FUEL

Non-dimensionalisation parameters for predicting the cooling effectiveness of droplets impinging on moderate temperature solid surfaces

(2011) George Strotos et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Comparative Study on Ejection Phenomena of Droplets from Electro-Hydrodynamic Jet by Hydrophobic and Hydrophilic Coatings of Nozzles

(2010) Yong-Jae Kim et al.   JAPANESE JOURNAL OF APPLIED PHYSICS

Characterization of string cavitation in large-scale Diesel nozzles with tapered holes

(2009) M. Gavaises et al.   PHYSICS OF FLUIDS

Flow in valve covered orifice nozzles with cylindrical and tapered holes and link to cavitation erosion and engine exhaust emissions

(2008) M Gavaises   International Journal of Engine Research

Simulation of cavitation in outward-opening piezo-type pintle injector nozzles

(2008) E Giannadakis et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING

Influence of injection timing on the exhaust emissions of a dual-fuel CI engine

(2007) Cenk Sayin et al.   RENEWABLE ENERGY