Biodegradable Poly(Lactic Acid) Nanocomposites for Fused Deposition Modeling 3D Printing
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Biodegradable Poly(Lactic Acid) Nanocomposites for Fused Deposition Modeling 3D Printing
Authors
Keywords
-
Journal
Nanomaterials
Volume 10, Issue 12, Pages 2567
Publisher
MDPI AG
Online
2020-12-21
DOI
10.3390/nano10122567
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- 3D printing biocompatible l-Arg/GNPs/PLA nanocomposites with enhanced mechanical property and thermal stability
- (2020) Yanen Wang et al. JOURNAL OF MATERIALS SCIENCE
- Tensile failure strength and separation angle of FDM 3D printing PLA material: Experimental and theoretical analyses
- (2020) Tianyun Yao et al. COMPOSITES PART B-ENGINEERING
- Lignocellulosic fillers and graphene nanoplatelets as hybrid reinforcement for polylactic acid: Effect on mechanical properties and degradability
- (2020) Roberto Scaffaro et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Investigate the effects of process parameters on material properties and microstructural changes of 3D-printed specimens using fused deposition modelling (FDM)
- (2020) N. Naveed MATERIALS TECHNOLOGY
- Effect of surface texturing on friction behaviour of 3D printed polylactic acid (PLA)
- (2020) Ruttba Aziz et al. POLYMER TESTING
- Three-Dimensional Printing of Continuous Flax Fiber-Reinforced Thermoplastic Composites by Five-Axis Machine
- (2020) Haiguang Zhang et al. Materials
- Micrometer Copper-Zinc Alloy Particles-Reinforced Wood Plastic Composites with High Gloss and Antibacterial Properties for 3D Printing
- (2020) Feiwen Yang et al. Polymers
- Effects of Magnesium Oxide (MgO) Shapes on In Vitro and In Vivo Degradation Behaviors of PLA/MgO Composites in Long Term
- (2020) Yun Zhao et al. Polymers
- Essential Nanostructure Parameters to Govern Reinforcement and Functionality of Poly(lactic) Acid Nanocomposites with Graphene and Carbon Nanotubes for 3D Printing Application
- (2020) Rumiana Kotsilkova et al. Polymers
- The Effect of Printing Parameters on Electrical Conductivity and Mechanical Properties of PLA and ABS Based Carbon Composites in Additive Manufacturing of Upper Limb Prosthetics
- (2020) Attila Pentek et al. Crystals
- Study of the matrix-filler interface in PLA/Mg composites manufactured by Material Extrusion using a colloidal feedstock
- (2020) A. Ferrández-Montero et al. Additive Manufacturing
- 3D‐Printed Wood‐Fiber Reinforced Architected Cellular Composites
- (2020) Ehsan Estakhrianhaghighi et al. ADVANCED ENGINEERING MATERIALS
- Properties investigation of 3D printed continuous pineapple leaf fiber-reinforced PLA composite
- (2020) Jaya Suteja et al. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
- Preparation of antimicrobial 3D printing filament: In situ thermal formation of silver nanoparticles during the material extrusion
- (2020) Daria Podstawczyk et al. POLYMER COMPOSITES
- Enhancing the mechanical properties of 3D printed polylactic acid using nanocellulose
- (2020) Tushar Ambone et al. POLYMER ENGINEERING AND SCIENCE
- CNC dispersion in PLA and PBAT using two solvents: morphological and rheological properties
- (2020) Mojtaba Mohammadi et al. CELLULOSE
- Effect of Process Parameters on Tensile Mechanical Properties of 3D Printing Continuous Carbon Fiber-Reinforced PLA Composites
- (2020) Hao Dou et al. Materials
- Tailoring the mechanical properties of 3D-printed continuous flax/PLA biocomposites by controlling the slicing parameters
- (2020) A. Le Duigou et al. COMPOSITES PART B-ENGINEERING
- Additive manufacturing of CNTs/PLA composites and the correlation between microstructure and functional properties
- (2020) Xing Zhou et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Magnesium Filled Polylactic Acid (PLA) Material for Filament Based 3D Printing
- (2019) Iulian Antoniac et al. Materials
- Mechanical properties of CF-reinforced PLA parts manufactured by fused deposition modeling
- (2019) Anouar El Magri et al. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
- Optimizing 3D printing performance of acrylonitrile‐butadiene‐styrene composites with cellulose nanocrystals/silica nanohybrids
- (2019) Bai Huang et al. POLYMER INTERNATIONAL
- PLA/Graphene/MWCNT Composites with Improved Electrical and Thermal Properties Suitable for FDM 3D Printing Applications
- (2019) Evgeni Ivanov et al. Applied Sciences-Basel
- Mechanical properties of PLA-graphene filament for FDM 3D printing
- (2019) José C. Camargo et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Statistical analysis of mechanical properties of wood-PLA composites prepared via additive manufacturing
- (2019) K. Vigneshwaran et al. INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION
- Effects of carbon nanotube on the thermal, mechanical, and electrical properties of PLA/CNT printed parts in the FDM process
- (2019) Leipeng Yang et al. SYNTHETIC METALS
- Nanocarbon/Poly(Lactic) Acid for 3D Printing: Effect of Fillers Content on Electromagnetic and Thermal Properties
- (2019) Giovanni Spinelli et al. Materials
- Fabrication, Crystalline Behavior, Mechanical Property and In-Vivo Degradation of Poly(l–lactide) (PLLA)–Magnesium Oxide Whiskers (MgO) Nano Composites Prepared by In-Situ Polymerization
- (2019) Hui Liang et al. Polymers
- 3D printed antibacterial silver nanowire/polylactide nanocomposites
- (2019) Ipek Bayraktar et al. COMPOSITES PART B-ENGINEERING
- Effect of Porosity and Crystallinity on 3D Printed PLA Properties
- (2019) Yuhan Liao et al. Polymers
- Modification the surface quality and mechanical properties by laser polishing of Al/PLA part manufactured by fused deposition modeling
- (2019) Lan Chen et al. APPLIED SURFACE SCIENCE
- Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites
- (2019) M. Heidari-Rarani et al. COMPOSITES PART B-ENGINEERING
- Recycling of fiberglass wind turbine blades into reinforced filaments for use in Additive Manufacturing
- (2019) Amirmohammad Rahimizadeh et al. COMPOSITES PART B-ENGINEERING
- Polylactide/hemp hurd biocomposites as sustainable 3D printing feedstock
- (2019) Xianglian Xiao et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Laser polishing of Cu/PLA composite parts fabricated by fused deposition modeling: Analysis of surface finish and mechanical properties
- (2019) Lan Chen et al. POLYMER COMPOSITES
- Microstructure and Mechanical Performance of 3D Printed Wood-PLA/PHA Using Fused Deposition Modelling: Effect of Printing Temperature
- (2019) Guessasma et al. Polymers
- 3D printing of continuous flax fibre reinforced biocomposites for structural applications
- (2019) A. Le Duigou et al. MATERIALS & DESIGN
- Crystallization kinetics and morphology of small concentrations of cellulose nanofibrils (CNFs) and cellulose nanocrystals (CNCs) melt-compounded into poly(lactic acid) (PLA) with plasticizer
- (2019) Caitlyn M. Clarkson et al. POLYMER
- Morpho-Structural, Thermal and Mechanical Properties of PLA/PHB/Cellulose Biodegradable Nanocomposites Obtained by Compression Molding, Extrusion, and 3D Printing
- (2019) Adriana Nicoleta Frone et al. Nanomaterials
- Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling
- (2018) M.A. Caminero et al. COMPOSITES PART B-ENGINEERING
- PLA based biocomposites reinforced with Posidonia oceanica leaves
- (2018) Roberto Scaffaro et al. COMPOSITES PART B-ENGINEERING
- Current research trends on plastic pollution and ecological impacts on the soil ecosystem: A review
- (2018) Yooeun Chae et al. ENVIRONMENTAL POLLUTION
- Improved properties of PLA biocomposites toughened with bamboo cellulose nanowhiskers through silane modification
- (2018) Shaoping Qian et al. JOURNAL OF MATERIALS SCIENCE
- Interlayer diffusion of surface segregating additives to improve the isotropy of fused deposition modeling products
- (2018) Neiko P. Levenhagen et al. POLYMER
- FDM process parameters influence over the mechanical properties of polymer specimens: A review
- (2018) Diana Popescu et al. POLYMER TESTING
- Crystallization behaviors of poly(lactic acid) composites fabricated using functionalized eggshell powder and poly(ethylene glycol)
- (2018) Yi Li et al. THERMOCHIMICA ACTA
- Polylactide (PLA) Filaments a Biobased Solution for Additive Manufacturing: Correlating Rheology and Thermomechanical Properties with Printing Quality
- (2018) Gianluca Cicala et al. Materials
- The Degradation Properties of MgO Whiskers/PLLA Composite In Vitro
- (2018) Yun Zhao et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- Determination of geometrical and viscoelastic properties of PLA/PHB samples made by additive manufacturing for urethral substitution
- (2018) Alena Findrik Balogová et al. JOURNAL OF BIOTECHNOLOGY
- Influence of PLA Filament Conditions on Characteristics of FDM Parts
- (2018) Ana Valerga et al. Materials
- The Influence of Manufacturing Parameters on the Mechanical Behaviour of PLA and ABS Pieces Manufactured by FDM: A Comparative Analysis
- (2018) Adrián Rodríguez-Panes et al. Materials
- Nanoindentation analysis of 3D printed poly(lactic acid)-based composites reinforced with graphene and multiwall carbon nanotubes
- (2018) Todor Batakliev et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Mechanical and thermal properties of bamboo fiber reinforced polypropylene/polylactic acid composites for 3D printing
- (2018) Haibo Long et al. POLYMER ENGINEERING AND SCIENCE
- Effect of process parameters on tensile strength of FDM printed PLA part
- (2018) Shilpesh R. Rajpurohit et al. RAPID PROTOTYPING JOURNAL
- Morphological, Rheological and Electromagnetic Properties of Nanocarbon/Poly(lactic) Acid for 3D Printing: Solution Blending vs. Melt Mixing
- (2018) Giovanni Spinelli et al. Materials
- 3D Printing of PLA/clay Nanocomposites: Influence of Printing Temperature on Printed Samples Properties
- (2018) Bartolomeo Coppola et al. Materials
- Release of Graphene and Carbon Nanotubes from Biodegradable Poly(Lactic Acid) Films during Degradation and Combustion: Risk Associated with the End-of-Life of Nanocomposite Food Packaging Materials
- (2018) Stanislav Kotsilkov et al. Materials
- Microplastic pollution, a threat to marine ecosystem and human health: a short review
- (2017) Shivika Sharma et al. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
- Release of carbon nanoparticles of different size and shape from nanocomposite poly(lactic) acid film into food simulants
- (2017) Hristiana Velichkova et al. Food Additives and Contaminants Part A-Chemistry Analysis Control Exposure & Risk Assessment
- Influence of polymer swelling and dissolution into food simulants on the release of graphene nanoplates and carbon nanotubes from poly(lactic) acid and polypropylene composite films
- (2017) Hristiana Velichkova et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites
- (2017) Xiaoyong Tian et al. JOURNAL OF CLEANER PRODUCTION
- Magnesium Catalyzed Polymerization of End Functionalized Poly(propylene maleate) and Poly(propylene fumarate) for 3D Printing of Bioactive Scaffolds
- (2017) James A. Wilson et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- PDLLA honeycomb-like scaffolds with a high loading of superhydrophilic graphene/multi-walled carbon nanotubes promote osteoblast in vitro functions and guided in vivo bone regeneration
- (2017) Edmundo Silva et al. Materials Science & Engineering C-Materials for Biological Applications
- Improving the impact strength of Poly(lactic acid) (PLA) in fused layer modeling (FLM)
- (2017) Lu Wang et al. POLYMER
- The microstructure and mechanical properties of 3D printed carbon nanotube-polylactic acid composites
- (2017) Huseini S. Patanwala et al. POLYMER COMPOSITES
- Integration of graphene in poly(lactic) acid by 3D printing to develop creep and wear-resistant hierarchical nanocomposites
- (2017) Jenniffer Bustillos et al. POLYMER COMPOSITES
- Hydrolytic degradation of polylactic acid (PLA) and its composites
- (2017) Moataz A. Elsawy et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Impact of the Fused Deposition (FDM) Printing Process on Polylactic Acid (PLA) Chemistry and Structure
- (2017) Michael Arthur Cuiffo et al. Applied Sciences-Basel
- Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection
- (2017) J.M. Chacón et al. MATERIALS & DESIGN
- Welding of 3D-printed carbon nanotube–polymer composites by locally induced microwave heating
- (2017) Charles B. Sweeney et al. Science Advances
- In vitro degradation of biodegradable polylactic acid/magnesium composites: Relevance of Mg particle shape
- (2016) S.C. Cifuentes et al. Acta Biomaterialia
- Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive review
- (2016) Shady Farah et al. ADVANCED DRUG DELIVERY REVIEWS
- Effects of modifying agents on surface modifications of magnesium oxide whiskers
- (2016) Yun Zhao et al. APPLIED SURFACE SCIENCE
- Cellulose Nanowhiskers from Moso Bamboo Residues: Extraction and Characterization
- (2016) Shaoping Qian et al. BioResources
- Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
- (2016) Xiaoyong Tian et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Hot-melt extruded filaments based on pharmaceutical grade polymers for 3D printing by fused deposition modeling
- (2016) Alice Melocchi et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Plastic waste in the marine environment: A review of sources, occurrence and effects
- (2016) W.C. LI et al. SCIENCE OF THE TOTAL ENVIRONMENT
- Effects of MgO whiskers on mechanical properties and crystallization behavior of PLLA/MgO composites
- (2016) Yun Zhao et al. MATERIALS & DESIGN
- The status, challenges, and future of additive manufacturing in engineering
- (2015) Wei Gao et al. COMPUTER-AIDED DESIGN
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started