- Home
- Publications
- Publication Search
- Publication Details
Title
A review on micro-milling: recent advances and future trends
Authors
Keywords
-
Journal
The International Journal of Advanced Manufacturing Technology
Volume 112, Issue 3-4, Pages 655-684
Publisher
Springer Science and Business Media LLC
Online
2020-12-29
DOI
10.1007/s00170-020-06445-w
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Experimental investigation and optimisation of the micro milling process of hardened hot-work tool steel
- (2020) B. Z. Balázs et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Determination of minimum uncut chip thickness and size effects in micro-milling of P-20 die steel using surface quality and process signal parameters
- (2020) Priyabrata Sahoo et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Comparative analysis of wobble milling, helical milling and conventional drilling of CFRPs
- (2020) Csongor Pereszlai et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Deep reactive ion etching of ‘grass-free’ widely-spaced periodic 2D arrays, using sacrificial structures
- (2020) Chantal M. Silvestre et al. MICROELECTRONIC ENGINEERING
- Off-line Geometrical and Microscopic & On-line Vibration Based Cutting Tool Wear Analysis for Micro-Milling of Ceramics
- (2020) László Móricz et al. MEASUREMENT
- Experimental investigation on CO2 laser-assisted micro-slot milling characteristics of borosilicate glass
- (2020) Taekyum Kim et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Experimental Investigation of Cutting Vibration during Micro-End-Milling of the Straight Groove
- (2020) Lijie Ma et al. Micromachines
- Structural design and fabrication of polycrystalline diamond micro ball-end mill
- (2020) Hao Yuan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Micromachining of hardened hot-work tool steel: effects of milling strategies
- (2020) Barnabás Zoltán Balázs et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Energy consumption considering tool wear and optimization of cutting parameters in micro milling process
- (2020) Xuewei Zhang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Modelling and experimental analysis of the effects of run out, minimum chip thickness and elastic recovery on the cutting force in micro-end-milling
- (2020) Xiubing Jing et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- MICRO/MESO-SCALE MECHANICAL MACHINING 2020: A TWO DECADE STATE-OF-THE-FIELD REVIEW
- (2020) Johnson Samuel et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- IN100 Ni-based superalloy fabricated by micro-laser aided additive manufacturing: Correlation of the microstructure and fracture mechanism
- (2020) Fei Weng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Surface flatness and roughness evolution after magnetic assisted ball burnishing of magnetizable and non-magnetizable materials
- (2020) Zsolt F. Kovács et al. MEASUREMENT
- Design, optimization and manufacturing of polycrystalline diamond micro-end-mill for micro-milling of GH4169
- (2020) Ni Chen et al. DIAMOND AND RELATED MATERIALS
- Fabrication of Large Aspect Ratio PCD Micro-milling Tool with Pulsed Lasers and Grinding
- (2020) Xiuqing Hao et al. Journal of Manufacturing Processes
- Study on the surface damage mechanism of monocrystalline silicon in micro ball-end milling
- (2019) Minghui Yang et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Micro-machinability and edge chipping mechanism studies on diamond micro-milling of monocrystalline silicon
- (2019) Zi Jie Choong et al. Journal of Manufacturing Processes
- Evaluation of scale effect of micro electrical discharge machining system
- (2019) Kan Wang et al. Journal of Manufacturing Processes
- The Effect of Cutting Parameters on Micro-hardness and the Prediction of Vickers Hardness Based on a Response Surface Methodology for Micro-milling Inconel 718
- (2019) Xiaohong Lu et al. MEASUREMENT
- Tailored laser vector fields for high-precision micro-manufacturing
- (2019) Olivier J. Allegre et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Feasibility study of the Ti(C7N3)-based cermet micro-mill based on dynamic fatigue behavior and modeling of the contact stress distribution on the round cutting edge
- (2019) Yishun Wang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Research on the ploughing force in micro milling of soft-brittle crystals
- (2019) Ni Chen et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Tool wear analysis in micromilling of titanium alloy
- (2019) Alessandro Colpani et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- The effect of radial rake angle on chip thickness in the case of face milling
- (2019) György Póka et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Wear behavior of TiAlN coated WC tool during micro end milling of Ti-6Al-4V and analysis of surface roughness
- (2019) Vipindas K et al. WEAR
- Size dependent vibration analysis of micro-milling operations with process damping and structural nonlinearities
- (2019) Ali Mokhtari et al. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
- Measurement and uncertainty analysis of surface roughness and material removal rate in micro turning operation and process parameters optimization
- (2019) S.P. Leo Kumar MEASUREMENT
- In-plane silicon microneedles with open capillary microfluidic networks by deep reactive ion etching and sacrificial layer based sharpening
- (2019) Yan Li et al. SENSORS AND ACTUATORS A-PHYSICAL
- Study on micro-grinding quality in micro-grinding tool for single crystal silicon
- (2019) Yinghui Ren et al. Journal of Manufacturing Processes
- Wear mechanisms of Ti(C7N3)-based cermet micro-drill and machining quality during ultra-high speed micro-drilling multi-layered PCB consisting of copper foil and glass fiber reinforced plastics
- (2019) Yishun Wang et al. CERAMICS INTERNATIONAL
- The coupling effect of micro-groove textures and nanofluids on cutting performance of uncoated cemented carbide tools in milling Ti-6Al-4V
- (2019) Chichi Zhou et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Time varying and condition adaptive hidden Markov model for tool wear state estimation and remaining useful life prediction in micro-milling
- (2019) Weijian Li et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- A molecular dynamic study of nano-grinding of a monocrystalline copper-silicon substrate
- (2019) Yixin Xu et al. APPLIED SURFACE SCIENCE
- Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: A review
- (2019) Norbert Geier et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Tool wear modelling using micro tool diameter reduction for micro-end-milling of tool steel H13
- (2019) C. S. Manso et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Non-traditional and hybrid processes for micro and nano manufacturing
- (2019) Atanas Ivanov et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Tool condition monitoring techniques in milling process — a review
- (2019) T. Mohanraj et al. Journal of Materials Research and Technology-JMR&T
- Prediction of cutting forces during micro end milling considering chip thickness accumulation
- (2019) S. Wojciechowski et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Semi-analytic modelling of cutting forces in micro ball-end milling of NAK80 steel with wear-varying cutting edge and associated nonlinear process characteristics
- (2019) Lin Zhou et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Effect of process parameters on micro-textured surface generation in feed direction vibration assisted milling
- (2019) X.H. Shen et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Surface generation modeling of micro milling process with stochastic tool wear
- (2019) Xuewei Zhang et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Investigation on micro-milling of micro-grooves with high aspect ratio and laser deburring
- (2019) Yinfei Yang et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Effect of the progressive tool wear on surface topography and chip formation in micro-milling of Ti–6Al–4V using Ti(C7N3)-based cermet micro-mill
- (2019) Yishun Wang et al. TRIBOLOGY INTERNATIONAL
- Laser-assisted micro-milling of austenitic stainless steel X5CrNi18-10
- (2019) Mohammadali Kadivar et al. Journal of Manufacturing Processes
- Influences of TiAlN coating and limiting angles of flutes on prediction of cutting forces and dynamic stability in micro milling of die steel (P-20)
- (2019) Priyabrata Sahoo et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of cutting edge radius on micro end milling: force analysis, surface roughness, and chip formation
- (2018) K. Vipindas et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Theoretical and experimental investigation into non-uniformity of surface generation in micro-milling
- (2018) Zhanwen Sun et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Characterization of lubrication sensitivity on dynamic stability in high-speed micromilling of Ti–6Al–4V via a novel numerical scheme
- (2018) Rinku K. Mittal et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Prediction of cutting forces and instantaneous tool deflection in micro end milling by considering tool run-out
- (2018) Xuewei Zhang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Microstructure effects on process outputs in micro scale milling of heat treated Ti6Al4V titanium alloys
- (2018) Masoud Ahmadi et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Operational stability prediction in milling based on impact tests
- (2018) Adam K. Kiss et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Application of Hilbert–Huang transform for vibration signal analysis in end-milling
- (2018) Agus Susanto et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- A machine vision system for micro-milling tool condition monitoring
- (2018) Yiquan Dai et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Minimum chip thickness determination by means of cutting force signal in micro endmilling
- (2018) M.H.M. Dib et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Flattening of surface roughness in ultrashort pulsed laser micro-milling
- (2018) L. Romoli PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Polycrystalline diamond end mill cutting edge design to improve ductile-mode machining of silicon
- (2018) S.N.B. Oliaei et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Frequency and Time-Frequency Analysis of Cutting Force and Vibration Signals for Tool Condition Monitoring
- (2018) Juan C. Jauregui et al. IEEE Access
- An innovative investigation on chip formation mechanisms in micro-milling using natural diamond and tungsten carbide tools
- (2018) Zhichao Niu et al. Journal of Manufacturing Processes
- Modeling of cutting forces in micro end-milling
- (2018) Yanjie Yuan et al. Journal of Manufacturing Processes
- Chatter stability prediction in high-speed micromilling of Ti6Al4V via finite element based microend mill dynamics
- (2018) Kundan K. Singh et al. Advances in Manufacturing
- Study on the tool wear and its effect of PCD tool in micro milling of tungsten carbide
- (2018) Xian Wu et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Tool-life criteria and wear behavior of single-edge ultra-small micro end mills
- (2018) Ingo G. Reichenbach et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Novel method for burrs quantitative evaluation in micro-milling
- (2018) Fabrizio Medeossi et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Nanoindentation of crystalline silicon pillars fabricated by soft UV nanoimprint lithography and cryogenic deep reactive ion etching
- (2018) Gerry Hamdana et al. SENSORS AND ACTUATORS A-PHYSICAL
- Analysis of thrust force and characteristics of uncut fibres at non-conventional oriented drilling of unidirectional carbon fibre-reinforced plastic (UD-CFRP) composite laminates
- (2018) Norbert Geier et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A hybrid modelling approach towards prediction of cutting forces in micro end milling of Ti-6Al-4V titanium alloy
- (2018) Priyabrata Sahoo et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Investigation on the surface formation mechanism in micro milling of cemented carbide
- (2018) Xian Wu et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Power consumption optimization strategy in micro ball-end milling of D2 steel via TLBO coupled with 3D FEM simulation
- (2018) K. Venkata Rao MEASUREMENT
- Protocol for tool wear measurement in micro-milling
- (2018) L.L. Alhadeff et al. WEAR
- Improved analytical prediction of burr formation in micro end milling
- (2018) Xuewei Zhang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Modelling and experimental investigation on textured surface generation in vibration-assisted micro-milling
- (2018) Wanqun Chen et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- An improved cutting force model for micro milling considering machining dynamics
- (2017) Wanqun Chen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A modified analytical cutting force prediction model under the tool flank wear effect in micro-milling nickel-based superalloy
- (2017) Xiaohong Lu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Predicting the surface hardness of micro-milled nickel-base superalloy Inconel 718
- (2017) Xiaohong Lu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Model for the prediction of 3D surface topography and surface roughness in micro-milling Inconel 718
- (2017) Xiaohong Lu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental and simulation research on micro-milling temperature and cutting deformation of heat-resistance stainless steel
- (2017) Zhenxin Peng et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental characterization on micro-end milling of titanium alloy using nanofluid minimum quantity lubrication with chilly gas
- (2017) Jung Sub Kim et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A review of micro-mechanical cutting
- (2017) Brian Boswell et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Micro ball-end milling—an emerging manufacturing technology for micro-feature patterns
- (2017) Tej Pratap et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Improved analytical prediction of chip formation in orthogonal cutting of titanium alloy Ti6Al4V
- (2017) Wei Bai et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Research in minimum undeformed chip thickness and size effect in micro end-milling of potassium dihydrogen phosphate crystal
- (2017) Ni Chen et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Experimental study of micro-milling mechanism and surface quality of a nickel-based single crystal superalloy
- (2017) Qi Gao et al. Journal of Mechanical Science and Technology
- Milling properties of low temperature sintered zirconia blocks for dental use
- (2017) Ting-Hsun Lan et al. Materials Science & Engineering C-Materials for Biological Applications
- Optimisation of process parameters for the orbital and conventional drilling of uni-directional carbon fibre-reinforced polymers (UD-CFRP)
- (2017) Norbert Geier et al. MEASUREMENT
- Modeling and optimization in dry face milling of X2CrNi18-9 austenitic stainless steel using RMS and desirability approach
- (2017) Abdel-Ali Selaimia et al. MEASUREMENT
- The monitoring of micro milling tool wear conditions by wear area estimation
- (2017) Kunpeng Zhu et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Investigation on the burr formation mechanism in micro cutting
- (2017) Xian Wu et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Built-up edge effects on process outputs of titanium alloy micro milling
- (2017) Samad Nadimi Bavil Oliaei et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- FE modeling of burr size in high- speed micro-milling of Ti6Al4V
- (2017) Amrendra K. Yadav et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Effect of lubrication on machining response and dynamic instability in high-speed micromilling of Ti-6Al-4V
- (2017) Rinku K. Mittal et al. Journal of Manufacturing Processes
- Critical depth of cut and asymptotic spindle speed for chatter in micro milling with process damping
- (2016) J.J. Wang et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Cyber-physical systems in manufacturing
- (2016) L. Monostori et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Chatter suppression techniques in metal cutting
- (2016) J. Munoa et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Analytical modeling and experimental validation of residual stress in micro-end-milling
- (2016) F. Y. Peng et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Extension of empirical specific cutting force model for the process of fine chip-removing milling
- (2016) István Biró et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A study on process parameters in end milling of AISI-304 stainless steel under electrostatic minimum quantity lubrication conditions
- (2016) Xuefeng Xu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- An evaluation of micro milling chip thickness models for the process mechanics
- (2016) Ali Mamedov et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Research on specific cutting energy and parameter optimization in micro-milling of heat-resistant stainless steel
- (2016) Shoufeng Gao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Robust stability analysis of machining operations
- (2016) David Hajdu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A generic instantaneous undeformed chip thickness model for the cutting force modeling in micromilling
- (2016) Kexuan Li et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Continuous trench, pulsed laser ablation for micro-machining applications
- (2016) G.B.J. Cadot et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Chatter prediction for the peripheral milling of thin-walled workpieces with curved surfaces
- (2016) Yun Yang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Cutting forces in micro-end-milling processes
- (2016) Xuewei Zhang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Investigation on the edge forces in ball end milling of inclined surfaces
- (2016) Szymon Wojciechowski et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Thermal analysis of micro milling titanium alloy Ti–6Al–4V
- (2016) Ali Mamedov et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- An experimental investigation of micro-machinability of aluminum alloy 2024 using Ti(C7N3)-based cermet micro end-mill tools
- (2016) Kaitao Xu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- On monitoring chip formation, penetration depth and cutting malfunctions in bone micro-drilling via acoustic emission
- (2016) Zhirong Liao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Diamond micro-milling of lithium niobate for sensing applications
- (2016) Dehong Huo et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING
- Surface roughness modeling and optimization of tungsten–copper alloys in micro-milling processes
- (2016) Gerardo Beruvides et al. MEASUREMENT
- Optimization of micro milling of hardened steel with different grain sizes using multi-objective evolutionary algorithm
- (2016) Carlos Henrique Lauro et al. MEASUREMENT
- Influence of the cutting edge radius and the material grain size on the cutting force in micro cutting
- (2016) Xian Wu et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Cutting performance of nano-crystalline diamond (NCD) coating in micro-milling of Ti 6 Al 4 V alloy
- (2016) K. Aslantas et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Micromachining of a High-Density Current-Conducting Ceramic With the Use of Electrical-Discharge Machining. Part 1
- (2016) V. V. Kuzin et al. REFRACTORIES AND INDUSTRIAL CERAMICS
- Micromachining of a High-Density Current-Conducting Ceramic with the Use of Electrical-Discharge Machining. Part 2
- (2016) V. V. Kuzin et al. REFRACTORIES AND INDUSTRIAL CERAMICS
- Surface and subsurface characterisation in micro-milling of monocrystalline silicon
- (2015) Dehong Huo et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of tool paths and machining parameters on the performance in micro-milling of Ti6Al4V titanium with high-speed spindle attachment
- (2015) Emel Kuram et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Three-dimensional dynamic cutting forces prediction model during micro-milling nickel-based superalloy
- (2015) Xiaohong Lu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental research of milling force and surface quality for TC4 titanium alloy of micro-milling
- (2015) Haitao Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Instantaneous tool deflection model for micro milling
- (2015) Ali Mamedov et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Molecular dynamics modelling of brittle–ductile cutting mode transition: Case study on silicon carbide
- (2015) Gaobo Xiao et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Size effect and minimum chip thickness in micromilling
- (2015) Fernando Brandão de Oliveira et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Analytical modeling and experimental validation of micro end-milling cutting forces considering edge radius and material strengthening effects
- (2015) L. Zhou et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Modeling dynamic stability in high-speed micromilling of Ti–6Al–4V via velocity and chip load dependent cutting coefficients
- (2015) Kundan K. Singh et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Evaluation of minimum quantity lubrication effects by cutting force signals in face milling of Inconel 182 overlays
- (2015) Chengdong Wang et al. JOURNAL OF CLEANER PRODUCTION
- Analyzing effects of cooling and lubrication conditions in micromilling of Ti6Al4V
- (2015) Elisa Vazquez et al. JOURNAL OF CLEANER PRODUCTION
- Investigating material removal rate and surface roughness using multi-objective optimization for focused ion beam (FIB) micro-milling of cemented carbide
- (2015) Sanket N. Bhavsar et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Hybrid micro-machining processes: A review
- (2015) Saeed Zare Chavoshi et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Bio-inspired self-sharpening cutting tool surface for finish hard turning of steel
- (2014) Wenping Jiang CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Chatter stability for micromilling processes with flat end mill
- (2014) Qinghua Song et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- An experimental investigation on micro machining of fine-grained graphite
- (2014) Dehong Huo et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Micro-milling performance of AISI 304 stainless steel using Taguchi method and fuzzy logic modelling
- (2014) Emel Kuram et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Modeling and Simulation of Mechanical Micro-Machining—A Review
- (2014) Ravi Shankar Anand et al. MACHINING SCIENCE AND TECHNOLOGY
- The effect of spindle speed, feed-rate and machining time to the surface roughness and burr formation of Aluminum Alloy 1100 in micro-milling operation
- (2014) G. Kiswanto et al. Journal of Manufacturing Processes
- Analysis of the Forces in Micromilling of Hardened AISI H13 Steel with Different Grain Sizes Using the Taguchi Methodology
- (2014) Carlos Henrique Lauro et al. Advances in Mechanical Engineering
- FE/SPH modelling of orthogonal micro-machining of f.c.c. single crystal
- (2013) S. Abolfazl Zahedi et al. COMPUTATIONAL MATERIALS SCIENCE
- Type-2 fuzzy tool condition monitoring system based on acoustic emission in micromilling
- (2013) Qun Ren et al. INFORMATION SCIENCES
- The optimal design of micro end mill for milling SKD61 tool steel
- (2013) Chen Chi-Hsiang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of size effect on burr formation in micro cutting
- (2013) Tao Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Chatter Stability Model of Micro-Milling With Process Damping
- (2013) Xiaoliang Jin et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Micro-end milling of NiTi biomedical alloys, burr formation and phase transformation
- (2013) R. Piquard et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Characteristics and mechanism of top burr formation in slotting microchannels using arrayed thin slotting cutters
- (2013) Zhenping Wan et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- An experimental investigation on micro-milling of polymethyl methacrylate components with nanometric surface roughness
- (2013) Feifei Jiao et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Research on the modeling of burr formation process in micro-ball end milling operation on Ti–6Al–4V
- (2012) M. J. Chen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- High-speed micro-milling: Novel coatings for tool wear reduction
- (2012) S. De Cristofaro et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Chatter modelling in micro-milling by considering process nonlinearities
- (2012) S.M. Afazov et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions
- (2012) S. Zhang et al. JOURNAL OF CLEANER PRODUCTION
- A new model for the prediction of cutting forces in micro-end-milling operations
- (2012) P. Rodríguez et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effects of micro-milling conditions on the cutting forces and process stability
- (2012) S.M. Afazov et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Experimental and finite element simulation based investigations on micro-milling Ti-6Al-4V titanium alloy: Effects of cBN coating on tool wear
- (2012) Thanongsak Thepsonthi et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- State of the Art on Micromilling of Materials, a Review
- (2012) M.A. Câmara et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effect of side edge angle and effective rake angle on top burrs in micro-milling
- (2012) Kushendarsyah Saptaji et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Application of backpropagation neural network for spindle vibration-based tool wear monitoring in micro-milling
- (2011) Wan-Hao Hsieh et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Prediction and experimental validation of micro-milling cutting forces of AISI H13 steel at hardness between 35 and 60 HRC
- (2011) S. M. Afazov et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Ploughing detection in micromilling processes using the cutting force signal
- (2011) Hui Taek Yun et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Identification of factors that dominate size effect in micro-machining
- (2011) A.J Mian et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Chatter in machining processes: A review
- (2011) Guillem Quintana et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Chatter frequencies of micromilling processes: Influencing factors and online detection via piezoactuators
- (2011) Yinuo Shi et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Thermal and mechanical modeling analysis of laser-assisted micro-milling of difficult-to-machine alloys
- (2011) Hongtao Ding et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Characterization of the transition from ploughing to cutting in micro machining and evaluation of the minimum thickness of cut
- (2011) A. Cuba Ramos et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Prediction of micro-milling forces with finite element method
- (2011) Xiaoliang Jin et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Modeling of minimum uncut chip thickness in micro machining of aluminum
- (2011) M. Malekian et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Characterization and modeling of burr formation in micro-end milling
- (2011) Ravi Lekkala et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- An experimental investigation into micro ball end-milling of silicon
- (2011) Muhammad Arif et al. Journal of Manufacturing Processes
- An experimental analysis of process parameters to manufacture metallic micro-channels by micro-milling
- (2010) Elisa Vázquez et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Dynamic surface generation modeling of two-dimensional vibration-assisted micro-end-milling
- (2010) Hui Ding et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Tool edge radius effect on cutting temperature in micro-end-milling process
- (2010) Kai Yang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Investigation of micro-milling process parameters for surface roughness and milling depth
- (2010) Ibrahim Etem Saklakoglu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Modelling and simulation of micro-milling cutting forces
- (2010) S.M. Afazov et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Experimental evaluation of minimum quantity lubrication in near micro-milling
- (2010) Kuan-Ming Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Investigation of cutting force behaviour considering the effect of cutting edge radius in the micro-scale milling of AISI 1045 steel
- (2010) I-S Kang et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- An experimental technique to detect tool–workpiece contact in micromilling
- (2010) Mukund Kumar et al. Journal of Manufacturing Processes
- Ultraprecision ductile mode machining of glass by micromilling process
- (2010) Muhammad Arif et al. Journal of Manufacturing Processes
- Mechanistic modeling and accurate measurement of micro end milling forces
- (2009) S.S. Park et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Burrs—Analysis, control and removal
- (2009) J.C. Aurich et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Prediction of surface roughness in the end milling machining using Artificial Neural Network
- (2009) Azlan Mohd Zain et al. EXPERT SYSTEMS WITH APPLICATIONS
- Design of a five-axis ultra-precision micro-milling machine—UltraMill. Part 1: holistic design approach, design considerations and specifications
- (2009) Dehong Huo et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Modeling of dynamic micro-milling cutting forces
- (2009) Mohammad Malekian et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Chatter suppression in micro end milling with process damping
- (2009) Ramin Rahnama et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Tool wear monitoring of micro-milling operations
- (2009) Mohammad Malekian et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Micro end mill tool temperature measurement and prediction
- (2009) Derek L. Wissmiller et al. Journal of Manufacturing Processes
- Modelling the cutting edge radius size effect for force prediction in micro milling
- (2008) G. Bissacco et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Tool condition monitoring in micromilling based on hierarchical integration of signal measures
- (2008) K. Jemielniak et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Evaluation and selection of hard coatings for micro milling of hardened tool steel
- (2008) A. Aramcharoen et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Surface integrity of dry machined titanium alloys
- (2008) A. Ginting et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Multi-category micro-milling tool wear monitoring with continuous hidden Markov models
- (2008) Kunpeng Zhu et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Size effect and tool geometry in micromilling of tool steel
- (2008) A. Aramcharoen et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Modelling and analysis of micro scale milling considering size effect, micro cutter edge radius and minimum chip thickness
- (2007) Xinmin Lai et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Investigations of tool edge radius effect in micromachining: A FEM simulation approach
- (2007) K.S. Woon et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now