The Critical Raw Materials in Cutting Tools for Machining Applications: A Review
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
The Critical Raw Materials in Cutting Tools for Machining Applications: A Review
Authors
Keywords
-
Journal
Materials
Volume 13, Issue 6, Pages 1377
Publisher
MDPI AG
Online
2020-03-19
DOI
10.3390/ma13061377
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Nanocomposite Multilayer Binary Nitride Coatings Based on Transition and Refractory Metals: Structure and Properties
- (2019) Alexander Pogrebnjak et al. Coatings
- Effect of Graphene and Carbon Nanotubes on the Thermal Conductivity of WC–Co Cemented Carbide
- (2019) Kui Chen et al. Metals
- Enhancing the machining performance by cutting tool surface modifications: a focused review
- (2019) Yuhan Chen et al. MACHINING SCIENCE AND TECHNOLOGY
- Characterization of the mechanism of cryogenic treatment on the microstructural changes in tungsten carbide cutting tools
- (2019) Abdullah Sert et al. MATERIALS CHARACTERIZATION
- Wear performance of nano-engineered boron doped graded layer CVD diamond coated cutting tool for machining of Al-SiC MMC
- (2019) K. Ramasubramanian et al. WEAR
- Oxidation Behavior of Fe–Al, Fe–Si and Fe–Al–Si Intermetallics
- (2019) Pavel Novák et al. Materials
- Toughness enhancement in TiN/WN superlattice thin films
- (2019) Julian Buchinger et al. ACTA MATERIALIA
- A Review on High Entropy Alloys Coatings: Fabrication Processes and Property Assessment
- (2019) Junchen Li et al. ADVANCED ENGINEERING MATERIALS
- Tribological behavior of diamond-like carbon in-situ formed on Fe3C-containing carburized layer by plasma carburizing
- (2019) Yang Yang et al. APPLIED SURFACE SCIENCE
- Prediction of the Phase Composition of High-Entropy Аlloys Based on Cr–Nb–Ti–V–Zr Using the Calphad Method
- (2019) I. I. Gorbachev et al. PHYSICS OF METALS AND METALLOGRAPHY
- Investigation on the performance of AlCrN and AlTiN coated cemented carbide inserts during end milling of maraging steel under dry, wet and cryogenic environments
- (2019) Vinay Varghese et al. Journal of Manufacturing Processes
- Experimental comparison of the performance of nanofluids, cryogenic and hybrid cooling in turning of Inconel 625
- (2019) Çağrı Vakkas Yıldırım TRIBOLOGY INTERNATIONAL
- Worker Safety in the Rare Earth Elements Recycling Process From the Review of Toxicity and Issues
- (2019) Seo-Ho Shin et al. Safety and Health at Work
- Bayesian Machine Learning in Metamaterial Design: Fragile Becomes Supercompressible
- (2019) Miguel A. Bessa et al. ADVANCED MATERIALS
- Correlation between Microstructural Alteration, Mechanical Properties and Manufacturability after Cryogenic Treatment: A Review
- (2019) Abbas Razavykia et al. Materials
- Successful control of the reaction mechanism for semi-direct recycling of hard metals
- (2019) Gregor Kücher et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- A Review on Binderless Tungsten Carbide: Development and Application
- (2019) Jialin Sun et al. Nano-Micro Letters
- Efficient exploration of the High Entropy Alloy composition-phase space
- (2018) A. Abu-Odeh et al. ACTA MATERIALIA
- Tribological performance of alumina matrix composites reinforced with nickel-coated graphene
- (2018) J. Wozniak et al. CERAMICS INTERNATIONAL
- TiB 2 barrier interlayer approach for HFCVD diamond deposition onto cemented carbide tools
- (2018) Tao Wang et al. DIAMOND AND RELATED MATERIALS
- Improvement of cutting performance of carbide cutting tools in milling of the Inconel 718 superalloy using multilayer nanocomposite hard coating and cryogenic heat treatment
- (2018) Bilal Kursuncu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Application of surface modification techniques during hard turning: Present work and future prospects
- (2018) Ch. Sateesh Kumar et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Binderless tungsten carbide carbon control with pressureless sintering
- (2018) R.T. Fox et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Combination of reaction synthesis and Spark Plasma Sintering in production of Ti-Al-Si alloys
- (2018) A. Knaislová et al. JOURNAL OF ALLOYS AND COMPOUNDS
- TOOL WEAR OF ADVANCED COATED TOOLS IN DRILLING OF CFRP
- (2018) Samuel Swan et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- New Tungsten Borides, Their Stability and Outstanding Mechanical Properties
- (2018) Alexander G. Kvashnin et al. Journal of Physical Chemistry Letters
- Processing of materials at cryogenic temperature and its implications in manufacturing: A review
- (2018) Anil Kumar Singla et al. MATERIALS AND MANUFACTURING PROCESSES
- Ab initio phase stabilities and mechanical properties of multicomponent alloys: A comprehensive review for high entropy alloys and compositionally complex alloys
- (2018) Yuji Ikeda et al. MATERIALS CHARACTERIZATION
- Structural and mechanical characterization of (TiZrNbHfTa)N/WN multilayered nitride coatings
- (2018) A.A. Bagdasaryan et al. MATERIALS LETTERS
- Synthesis and application of nano-structured metal nitrides and carbides: A review
- (2018) Sefiu Abolaji Rasaki et al. PROGRESS IN SOLID STATE CHEMISTRY
- Structural Features and Tribological Properties of Multilayer Coatings Based on Refractory Metals
- (2018) A. D. Pogrebnjak et al. Protection of Metals and Physical Chemistry of Surfaces
- Mechanical properties and oxidation resistance of Al-Cr-N/Ti-Al-Ta-N multilayer coatings
- (2018) W.M. Seidl et al. SURFACE & COATINGS TECHNOLOGY
- Enhancement of toughness and wear resistance by CrN/CrCN multilayered coatings for wood processing
- (2018) Ying Kong et al. SURFACE & COATINGS TECHNOLOGY
- Investigating the high frequency fatigue failure mechanisms of mono and multilayer PVD coatings by the cyclic impact tests
- (2018) Xuming Zha et al. SURFACE & COATINGS TECHNOLOGY
- Tribological and mechanical properties of multilayered TiVN/TiSiN coatings synthesized by cathodic arc evaporation
- (2018) Yin-Yu Chang et al. SURFACE & COATINGS TECHNOLOGY
- Thermal stability of nanocomposite Mo 2 BC hard coatings deposited by magnetron sputtering
- (2018) Stephan Gleich et al. SURFACE & COATINGS TECHNOLOGY
- Improvement to the adhesion of polycrystalline diamond films on WC-Co cemented carbides through ion etching of loosely bound growth centers
- (2018) S.A. Linnik et al. SURFACE & COATINGS TECHNOLOGY
- Microstructure, phase composition and mechanical properties of novel nanocomposite (TiAlSiY)N and nano-scale (TiAlSiY)N/MoN multifunctional heterostructures
- (2018) Aleksandr V. Pshyk et al. SURFACE & COATINGS TECHNOLOGY
- Tribological and cutting performance of TiAlCrN films with different Cr contents deposited with multilayered structure
- (2018) F. Fernandes et al. TRIBOLOGY INTERNATIONAL
- Wear and Tribological Performance of Different Ceramic Tools in Dry High Speed Machining of Ni-Co-Cr Precipitation Hardenable Aerospace Superalloy
- (2018) Mohamed A. Shalaby et al. TRIBOLOGY TRANSACTIONS
- Ex situ and in situ nanoscale wear mechanisms characterization of Zr/Zr x N tribological coatings
- (2018) L. Major et al. WEAR
- Wear behaviour of CVD diamond-coated tools in the drilling of woven CFRP composites
- (2018) Chunliang Kuo et al. WEAR
- Superhard CrN/MoN coatings with multilayer architecture
- (2018) A.D. Pogrebnjak et al. MATERIALS & DESIGN
- Influence of Thickness of Multilayered Nano-Structured Coatings Ti-TiN-(TiCrAl)N and Zr-ZrN-(ZrCrNbAl)N on Tool Life of Metal Cutting Tools at Various Cutting Speeds
- (2018) Alexey Vereschaka et al. Coatings
- Improvement of Wear Performance of Nano-Multilayer PVD Coatings under Dry Hard End Milling Conditions Based on Their Architectural Development
- (2018) Shahereen Chowdhury et al. Coatings
- Fabrication of functionally graded Fe-TiC wear resistant coating on CK45 steel substrate by plasma spray and evaluation of mechanical properties
- (2018) M. Rezapoor et al. CERAMICS INTERNATIONAL
- Effects of Ni content on microstructure, mechanical properties and Inconel 718 cutting performance of AlTiN-Ni nanocomposite coatings
- (2018) Jiyong Yi et al. CERAMICS INTERNATIONAL
- Breakthrough applications of high-entropy materials
- (2018) Jien-Wei Yeh et al. JOURNAL OF MATERIALS RESEARCH
- Microstructure, tribological and cutting performance of Ti-DLC/α-C:H multilayer film on cemented carbide
- (2018) Lei Huang et al. SURFACE & COATINGS TECHNOLOGY
- PCBN Performance in High Speed Finishing Turning of Inconel 718
- (2018) José Díaz-Álvarez et al. Metals
- The Role of Thin-Film Vacuum-Plasma Coatings and Their Influence on the Efficiency of Ceramic Cutting Inserts
- (2018) Marina Volosova et al. Coatings
- Synthesis and microstructural characterization of nanoscale multilayer TiAlN/TaN coatings deposited by DC magnetron sputtering
- (2018) Elbert Contreras et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of functionally graded TiN layer and deposition temperature on the structure and surface properties of TiCN coating deposited on plasma nitrided H13 steel by PACVD method
- (2018) Elyad Damerchi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Study the machinability characteristics of Nicked based Hastelloy C-276 under cryogenic cooling
- (2018) M. Dhananchezian MEASUREMENT
- Effect of Silicon Content on the Microstructure and Mechanical Properties of Ti-Si-B-C Nanocomposite Hard Coatings
- (2018) Divya Verma et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Micro tool design and fabrication: A review
- (2018) S.N.B. Oliaei et al. Journal of Manufacturing Processes
- Comparative study of CrAlSiN monolayer and CrN/AlSiN superlattice multilayer coatings: Behavior at high temperature in steam atmosphere
- (2018) A. Illana et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Mechanical properties and oxidation resistance of chemically vapor deposited TiSiN nanocomposite coating with thermodynamically designed compositions
- (2018) Lianchang Qiu et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Cutting temperature analysis and experiment of Ti–MoS2/Zr-coated cemented carbide tool
- (2017) Wenlong Song et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Comparison of the wear behavior of WC/(FeAl-B) and WC-Co composites at high temperatures
- (2017) M. Mottaghi et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Feasibility study of high-speed ultrasonic vibration cutting titanium alloy
- (2017) He Sui et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Diamond-CaCO 3 and diamond-Li 2 CO 3 materials sintered using the HPHT method
- (2017) A.S. Osipov et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Review of Relationship Between Particle Deformation, Coating Microstructure, and Properties in High-Pressure Cold Spray
- (2017) M. R. Rokni et al. JOURNAL OF THERMAL SPRAY TECHNOLOGY
- Multilayered vacuum-arc nanocomposite TiN/ZrN coatings before and after annealing: Structure, properties, first-principles calculations
- (2017) Alexander Pogrebnjak et al. MATERIALS CHARACTERIZATION
- Adaptive multicomponent nanocomposite coatings in surface engineering
- (2017) A D Pogrebnjak et al. PHYSICS-USPEKHI
- Direct selective laser sintering and melting of ceramics: a review
- (2017) Swee Leong Sing et al. RAPID PROTOTYPING JOURNAL
- Materials selection considerations for high entropy alloys
- (2017) X. Fu et al. SCRIPTA MATERIALIA
- Nanostructure reactive plasma sprayed TiCN coating
- (2017) Pengbo Mi et al. SURFACE & COATINGS TECHNOLOGY
- Development of diamond-like carbon (DLC) coatings with alternate soft and hard multilayer architecture for enhancing wear performance at high contact stress
- (2017) Yanyan Lin et al. SURFACE & COATINGS TECHNOLOGY
- Influence of microstructures on mechanical properties and tribology behaviors of TiN/Ti X Al 1−X N multilayer coatings
- (2017) Jingxian Wang et al. SURFACE & COATINGS TECHNOLOGY
- Working efficiency of cutting tools with multilayer nano-structured Ti-TiCN-(Ti,Al)CN and Ti-TiCN-(Ti,Al,Cr)CN coatings: Analysis of cutting properties, wear mechanism and diffusion processes
- (2017) Alexey A. Vereschaka et al. SURFACE & COATINGS TECHNOLOGY
- Structural and mechanical studies of W2N embedded Si3N4 nanocomposite hard coating prepared by reactive magnetron sputtering
- (2017) Sharmistha Anwar et al. SURFACE & COATINGS TECHNOLOGY
- Thermal stability and oxidation resistance of ZrSiN nanocomposite and ZrN/SiN x multilayered coatings: A comparative study
- (2017) I.A. Saladukhin et al. SURFACE & COATINGS TECHNOLOGY
- High temperature oxidation and cutting performance of AlCrN, TiVN and multilayered AlCrN/TiVN hard coatings
- (2017) Yin-Yu Chang et al. SURFACE & COATINGS TECHNOLOGY
- Influence of Cr additions on the structure and oxidation resistance of multilayered TiAlCrN films
- (2017) M. Danek et al. SURFACE & COATINGS TECHNOLOGY
- CHARACTERIZATION OF TiCN COATING SYNTHESIZED BY THE PLASMA ENHANCED PHYSICAL VAPOUR DEPOSITION PROCESS ON A CEMENTED CARBIDE TOOL
- (2017) T. SAMPATH KUMAR et al. SURFACE REVIEW AND LETTERS
- Oxidation-enhanced wear behavior of WC-FeAl cutting tools used in dry machining oxygen-free copper bars
- (2017) R. Furushima et al. WEAR
- A New Recycling Process for Tungsten Carbide Soft Scrap That Employs a Mechanochemical Reaction with Sodium Hydroxide
- (2017) et al. Metals
- Tribology of multilayer coatings for wear reduction: A review
- (2017) Mahdi Khadem et al. Friction
- Research into preparation and properties of graded cemented carbides with face center cubic-rich surface layer
- (2016) Jian Chen et al. APPLIED SURFACE SCIENCE
- Self-lubricating ceramic cutting tool material with the addition of nickel coated CaF2 solid lubricant powders
- (2016) Guangyong Wu et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Nanocomposite TiSiBC Hard Coatings with High Resistance to Wear, Fracture and Scratching
- (2016) P. Mahato et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Al 2 O 3 –cBN composites sintered by SPS and HPHT methods
- (2016) P. Klimczyk et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- High-entropy alloy: challenges and prospects
- (2016) Y.F. Ye et al. Materials Today
- Structural Investigation of AlN/SiOx Nanocomposite Hard Coatings Fabricated by Differential Pumping Cosputtering
- (2016) Masahiro Kawasaki et al. MICROSCOPY AND MICROANALYSIS
- Mechanical properties and high temperature oxidation of CrAlSiN/TiVN hard coatings synthesized by cathodic arc evaporation
- (2016) Yin-Yu Chang et al. SURFACE & COATINGS TECHNOLOGY
- CVD diamond coating on WC-Co substrate with Al-based interlayer
- (2016) Fan Ye et al. SURFACE & COATINGS TECHNOLOGY
- Nanocomposite Ti–Si–B–C hard coatings deposited by magnetron sputtering: Oxidation and mechanical behaviour with temperature and duration of oxidation
- (2016) P. Mahato et al. SURFACE & COATINGS TECHNOLOGY
- Effect of nitrogen on mechanical, oxidation and structural behaviour of Ti-Si-B-C-N nanocomposite hard coatings deposited by DC sputtering
- (2016) P. Mahato et al. SURFACE AND INTERFACE ANALYSIS
- Advances in the surface defect machining (SDM) of hard steels
- (2016) Waleed Bin Rashid et al. Journal of Manufacturing Processes
- Investigation of Nanoscale TiN/MoN Multilayered Systems, Fabricated Using Arc Evaporation
- (2015) A.D. Pogrebnjak et al. ACTA PHYSICA POLONICA A
- Fabrication and Research of Superhard (Zr-Ti-Cr-Nb)N Coatings
- (2015) O.V. Bondar et al. ACTA PHYSICA POLONICA A
- A multilayer innovative solution to improve the adhesion of nanocrystalline diamond coatings
- (2015) A. Poulon-Quintin et al. APPLIED SURFACE SCIENCE
- Al2O3–V cutting tools for machining hardened stainless steel
- (2015) K. Broniszewski et al. CERAMICS INTERNATIONAL
- Mechanics and mechanisms of fatigue in a WC–Ni hardmetal and a comparative study with respect to WC–Co hardmetals
- (2015) J.M. Tarragó et al. INTERNATIONAL JOURNAL OF FATIGUE
- Diamond machining of silicon: A review of advances in molecular dynamics simulation
- (2015) Saurav Goel et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Aspects of sintering of cemented carbides with Fe-based binders
- (2015) W.D. Schubert et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Microstructural Characterization of Chip Segmentation Under Different Machining Environments in Orthogonal Machining of Ti6Al4V
- (2015) Shashikant Joshi et al. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
- Structure and properties of (Zr-Ti-Cr-Nb)N multielement superhard coatings
- (2015) A. D. Pogrebnjak et al. Journal of Superhard Materials
- Fabrication of diamond–SiC–TiC composite by a spark plasma sintering-reactive synthesis method
- (2015) Xiaolin Zhou et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Dense pure binderless WC bulk material prepared by spark plasma sintering
- (2015) S. K. Li et al. MATERIALS SCIENCE AND TECHNOLOGY
- H trapping and mobility in nanostructured tungsten grain boundaries: a combined experimental and theoretical approach
- (2015) C. González et al. NUCLEAR FUSION
- Investigation of multilayered TiSiC/NiC protective coatings
- (2015) M. Braic et al. VACUUM
- Grand Challenges in Structural Materials
- (2015) John L. Provis Frontiers in Materials
- An updated overview of diamond-like carbon coating in tribology
- (2014) K. A. H. Al Mahmud et al. CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES
- Microstructure and mechanical properties of cBN-WC-Co composites used for cutting tools
- (2014) Cong Mao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructure and performance of functionally graded Ti(C,N)-based cermets prepared by double-glow plasma carburization
- (2014) Yong Zheng et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Oxidation, graphitization and thermal resistance of PCD materials with the various bonding phases of up to 800°C
- (2014) Lucyna Jaworska et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Architecture of PVD coatings for metalcutting applications: A review
- (2014) Aharon Inspektor et al. SURFACE & COATINGS TECHNOLOGY
- Titanium carbide/carbon nanocomposite hard coatings: A comparative study between various chemical analysis tools
- (2014) A.A. El Mel et al. SURFACE & COATINGS TECHNOLOGY
- Progress in high temperature nanomechanical testing of coatings for optimising their performance in high speed machining
- (2014) B.D. Beake et al. SURFACE & COATINGS TECHNOLOGY
- Structure and properties of Ti–Al–Si-X alloys produced by SHS method
- (2013) Pavel Novák et al. INTERMETALLICS
- State-of-the-art cryogenic machining and processing
- (2013) A. Shokrani et al. INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING
- Enhancement of the machinability of silicon by hydrogen ion implantation for ultra-precision micro-cutting
- (2013) S. To et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Recent development in reactive synthesis of nanostructured bulk materials by spark plasma sintering
- (2013) Lianjun Wang et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Hot pressing of tungsten carbide with and without sintering additives
- (2013) Agnieszka Gubernat et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- A Theoretical Assessment of Surface Defect Machining and Hot Machining of Nanocrystalline Silicon Carbide
- (2013) Saurav Goel et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Analysis of a free machining α+β titanium alloy using conventional and ultrasonically assisted turning
- (2013) Riaz Muhammad et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Recent search for new superhard materials: Go nano!
- (2013) Stan Veprek JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A
- An experimental investigation for the improvement of attainable surface roughness during hard turning process
- (2013) Waleed B Rashid et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- On the materials basis of modern society
- (2013) T. E. Graedel et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- nc-AlTiN/a-Si3N4 and nc-AlCrN/a-Si3N4 nanocomposite coatings as protection layer for PCBN tools in hard machining
- (2013) E. Uhlmann et al. SURFACE & COATINGS TECHNOLOGY
- Modelling and simulation of effect of ultrasonic vibrations on machining of Ti6Al4V
- (2013) Sandip Patil et al. ULTRASONICS
- The development of a surface defect machining method for hard turning processes
- (2013) Waleed Bin Rashid et al. WEAR
- Commentary: The Materials Project: A materials genome approach to accelerating materials innovation
- (2013) Anubhav Jain et al. APL Materials
- Cutting with coated tools: Coating technologies, characterization methods and performance optimization
- (2012) Konstantinos-Dionysios Bouzakis et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- The reciprocating wear behaviour of TiC–Ni3Al cermets
- (2012) S. Buchholz et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Investigation on microstructure and wear behavior of the NiAl–TiC–Al2O3 composite fabricated by self-propagation high-temperature synthesis with extrusion
- (2012) L.Y. Sheng et al. JOURNAL OF ALLOYS AND COMPOUNDS
- WCCo/cBN composites produced by pulse plasma sintering method
- (2012) Marcin Rosinski et al. JOURNAL OF MATERIALS SCIENCE
- Hard nanocomposite coatings: Thermal stability, oxidation resistance and toughness
- (2012) J. Musil SURFACE & COATINGS TECHNOLOGY
- Limits to the preparation of superhard nanocomposites: Impurities, deposition and annealing temperature
- (2012) S. Veprek et al. THIN SOLID FILMS
- Recent Advances in the Deposition of Diamond Coatings on Co-Cemented Tungsten Carbides
- (2012) R. Polini et al. Advances in Materials Science and Engineering
- Micro cutting of ferrous materials using diamond tool under ionized coolant with carbon particles
- (2011) A. Inada et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Nanometric cutting of single crystal silicon surfaces modified by ion implantation
- (2011) F.Z. Fang et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Microstructure and mechanical properties of ultrafine WC–Ni–VC–TaC–cBN cemented carbides fabricated by spark plasma sintering
- (2011) Huiyong Rong et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Functionally graded WC–Ti(C,N)–(Ta,Nb)C–Co hardmetals: Metallurgy and performance
- (2011) J. Glühmann et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- The role of cemented carbide functionally graded outer-layers on the wear performance of coated cutting tools
- (2011) José Garcia et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Mechanical fatigue and fracture of Nitinol
- (2011) S W Robertson et al. INTERNATIONAL MATERIALS REVIEWS
- Tool wear mechanisms and tool life enhancement in ultra-precision machining of titanium
- (2011) A.R. Zareena et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Spark Plasma Sintering of Diamond Binderless WC Composites
- (2011) Salvatore Grasso et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Porosity and cutting forces: from macroscale to microscale machining correlations
- (2011) O R Tutunea-Fatan et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Thermal conductivity of high-temperature Si–B–C–N thin films
- (2011) Jamie J. Gengler et al. SURFACE & COATINGS TECHNOLOGY
- Investigation of microstructured milling tool for deferring tool wear
- (2011) Wenlong Chang et al. WEAR
- Investigation on wear behaviour of cryogenically treated TiAlN coated tungsten carbide inserts in turning
- (2010) Simranpreet Singh Gill et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Tribological and mechanical properties of nanocrystalline-TiC/a-C nanocomposite thin films
- (2010) J. Musil et al. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A
- Cryogenic Treatment of Tool Materials: A Review
- (2010) Nirmal S. Kalsi et al. MATERIALS AND MANUFACTURING PROCESSES
- Production of NiAl–matrix composites by reactive sintering
- (2010) P Novák et al. POWDER METALLURGY
- Development of ultra-fine-grain binderless cBN tool for precision cutting of ferrous materials
- (2009) Kazuhiro Fujisaki et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Structures and properties of hard and superhard nanocomposite coatings
- (2009) Alexander D Pogrebnyak et al. PHYSICS-USPEKHI
- Superhard nanocomposites: Origin of hardness enhancement, properties and applications
- (2009) S. Veprek et al. SURFACE & COATINGS TECHNOLOGY
- Machining performance of low temperature treated P-30 tungsten carbide cutting tool inserts
- (2008) T.V. SreeramaReddy et al. CRYOGENICS
- Performance analysis of cryogenically treated coated carbide inserts
- (2008) K. Vadivel et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A review of cryogenic cooling in machining processes
- (2008) Yakup Yildiz et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Machinability of C45 steel with deep cryogenic treated tungsten carbide cutting tool inserts
- (2008) T.V. SreeramaReddy et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Influence of different post treatments on tungsten carbide–cobalt inserts
- (2008) Dinesh Thakur et al. MATERIALS LETTERS
- Duplex treatment of 304 AISI stainless steel using rf plasma nitriding and carbonitriding
- (2008) F.M. El-Hossary et al. Materials Science & Engineering C-Materials for Biological Applications
- Development of cutting tools with microscale and nanoscale textures to improve frictional behavior
- (2008) Noritaka Kawasegi et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started