Extrusion bioprinting of soft materials: An emerging technique for biological model fabrication

Nanoengineered Ionic–Covalent Entanglement (NICE) Bioinks for 3D Bioprinting

(2018) David Chimene et al.   ACS Applied Materials & Interfaces

Cell reprogramming by 3D bioprinting of human fibroblasts in polyurethane hydrogel for fabrication of neural-like constructs

(2018) Lin Ho et al.   Acta Biomaterialia

3D cell printing of in vitro stabilized skin model and in vivo pre-vascularized skin patch using tissue-specific extracellular matrix bioink: A step towards advanced skin tissue engineering

(2018) Byoung Soo Kim et al.   BIOMATERIALS

3D printed microchannel networks to direct vascularisation during endochondral bone repair

(2018) Andrew C. Daly et al.   BIOMATERIALS

A novel 3D bioprinted flexible and biocompatible hydrogel bioelectronic platform

(2018) Shweta Agarwala et al.   BIOSENSORS & BIOELECTRONICS

An innovative cell-printed microscale collagen model for mimicking intestinal villus epithelium

(2018) WonJin Kim et al.   CHEMICAL ENGINEERING JOURNAL

Epigenetic interplay between immune, stromal and cancer cells in the tumor microenvironment

(2018) Antonio Garcia-Gomez et al.   CLINICAL IMMUNOLOGY

Hydrogel matrices based on elastin and alginate for tissue engineering applications

(2018) Raquel Silva et al.   INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES

Mechanical behaviour of alginate-gelatin hydrogels for 3D bioprinting

(2018) Michael Di Giuseppe et al.   Journal of the Mechanical Behavior of Biomedical Materials

Handheld skin printer: in situ formation of planar biomaterials and tissues

(2018) Navid Hakimi et al.   LAB ON A CHIP

Collagen-alginate as bioink for three-dimensional (3D) cell printing based cartilage tissue engineering

(2018) Xingchen Yang et al.   Materials Science & Engineering C-Materials for Biological Applications

Patient-Specific Bioinks for 3D Bioprinting of Tissue Engineering Scaffolds

(2018) Negar Faramarzi et al.   Advanced Healthcare Materials

3D printing of concentrated alginate/gelatin scaffolds with homogeneous nano apatite coating for bone tissue engineering

(2018) Yongxiang Luo et al.   MATERIALS & DESIGN

3D Bioprinting of Breast Cancer Models for Drug Resistance Study

(2018) Ying Wang et al.   ACS Biomaterials-Science & Engineering

Development of a novel alginate-polyvinyl alcohol-hydroxyapatite hydrogel for 3D bioprinting bone tissue engineered scaffolds

(2017) Stephanie T. Bendtsen et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Modeling the Flow Behavior and Flow Rate of Medium Viscosity Alginate for Scaffold Fabrication With a Three-Dimensional Bioplotter

(2017) Md. Sarker et al.   JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME

3D bioprint me: a socioethical view of bioprinting human organs and tissues

(2017) Niki Vermeulen et al.   JOURNAL OF MEDICAL ETHICS

Printability study of hydrogel solution extrusion in nanoclay yield-stress bath during printing-then-gelation biofabrication

(2017) Yifei Jin et al.   Materials Science & Engineering C-Materials for Biological Applications

Print Me an Organ? Ethical and Regulatory Issues Emerging from 3D Bioprinting in Medicine

(2017) Frederic Gilbert et al.   SCIENCE AND ENGINEERING ETHICS

Mechanotransduction of matrix stiffness in regulation of focal adhesion size and number: reciprocal regulation of caveolin-1 and β1 integrin

(2017) Yi-Chun Yeh et al.   Scientific Reports

3D Bioprinting Human Induced Pluripotent Stem Cell Constructs for In Situ Cell Proliferation and Successive Multilineage Differentiation

(2017) Qi Gu et al.   Advanced Healthcare Materials

Bioprinted Osteogenic and Vasculogenic Patterns for Engineering 3D Bone Tissue

(2017) Batzaya Byambaa et al.   Advanced Healthcare Materials

‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State-of-the-Art

(2017) Stuart Kyle et al.   Advanced Healthcare Materials

Extracellular Matrix Scaffolds for Tissue Engineering and Regenerative Medicine

(2017) Sheng Yi et al.   Current Stem Cell Research & Therapy

Effects of Macromolecular Crowding on Human Adipose Stem Cell Culture in Fetal Bovine Serum, Human Serum, and Defined Xeno-Free/Serum-Free Conditions

(2017) Mimmi Patrikoski et al.   Stem Cells International

Scientometric and patentometric analyses to determine the knowledge landscape in innovative technologies: The case of 3D bioprinting

(2017) Marisela Rodríguez-Salvador et al.   PLoS One

Coaxial 3D bioprinting of self-assembled multicellular heterogeneous tumor fibers

(2017) Xingliang Dai et al.   Scientific Reports

In situ repair of bone and cartilage defects using 3D scanning and 3D printing

(2017) Lan Li et al.   Scientific Reports

Directing the Self-assembly of Tumour Spheroids by Bioprinting Cellular Heterogeneous Models within Alginate/Gelatin Hydrogels

(2017) Tao Jiang et al.   Scientific Reports

Strategy to Achieve Highly Porous/Biocompatible Macroscale Cell Blocks, Using a Collagen/Genipin-bioink and an Optimal 3D Printing Process

(2016) Yong Bok Kim et al.   ACS Applied Materials & Interfaces

3D Bioprinting a Cell-Laden Bone Matrix for Breast Cancer Metastasis Study

(2016) Xuan Zhou et al.   ACS Applied Materials & Interfaces

3D extracellular matrix interactions modulate tumour cell growth, invasion and angiogenesis in engineered tumour microenvironments

(2016) Anna V. Taubenberger et al.   Acta Biomaterialia

3D bioprinted extracellular matrix mimics facilitate directed differentiation of epithelial progenitors for sweat gland regeneration

(2016) Sha Huang et al.   Acta Biomaterialia

ECM and ECM-like materials — Biomaterials for applications in regenerative medicine and cancer therapy

(2016) Svenja Hinderer et al.   ADVANCED DRUG DELIVERY REVIEWS

Extracellular matrix structure

(2016) Achilleas D. Theocharis et al.   ADVANCED DRUG DELIVERY REVIEWS

A Generalizable Strategy for the 3D Bioprinting of Hydrogels from Nonviscous Photo-crosslinkable Inks

(2016) Liliang Ouyang et al.   ADVANCED MATERIALS

Alginate Sulfate–Nanocellulose Bioinks for Cartilage Bioprinting Applications

(2016) Michael Müller et al.   ANNALS OF BIOMEDICAL ENGINEERING

Direct 3D bioprinting of perfusable vascular constructs using a blend bioink

(2016) Weitao Jia et al.   BIOMATERIALS

Extracellular matrix-based biomaterial scaffolds and the host response

(2016) Joseph M. Aamodt et al.   BIOMATERIALS

Mechanistic aspects of mammalian cell size control

(2016) Kazuo Yamamoto et al.   DEVELOPMENT GROWTH & DIFFERENTIATION

Extracellular matrix bioscaffolds in tissue remodeling and morphogenesis

(2016) Ilea T. Swinehart et al.   DEVELOPMENTAL DYNAMICS

A 3D-printed local drug delivery patch for pancreatic cancer growth suppression

(2016) Hee-Gyeong Yi et al.   JOURNAL OF CONTROLLED RELEASE

3D Bioplotting of Gelatin/Alginate Scaffolds for Tissue Engineering: Influence of Crosslinking Degree and Pore Architecture on Physicochemical Properties

(2016) Ting Pan et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Stiffness of hyaluronic acid gels containing liver extracellular matrix supports human hepatocyte function and alters cell morphology

(2016) Daniel B. Deegan et al.   Journal of the Mechanical Behavior of Biomedical Materials

Bioprinted thrombosis-on-a-chip

(2016) Yu Shrike Zhang et al.   LAB ON A CHIP

Culturing on decellularized extracellular matrix enhances antioxidant properties of human umbilical cord-derived mesenchymal stem cells

(2016) Xiaozhen Liu et al.   Materials Science & Engineering C-Materials for Biological Applications

A 3D printed nano bone matrix for characterization of breast cancer cell and osteoblast interactions

(2016) Wei Zhu et al.   NANOTECHNOLOGY

Biomimetic 4D printing

(2016) A. Sydney Gladman et al.   NATURE MATERIALS

Three-dimensional bioprinting of thick vascularized tissues

(2016) David B. Kolesky et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Nano hydroxyapatite particles promote osteogenesis in a three-dimensional bio-printing construct consisting of alginate/gelatin/hASCs

(2016) Xiao-Fei Wang et al.   RSC Advances

3D Bioprinting Using a Templated Porous Bioink

(2016) James P. K. Armstrong et al.   Advanced Healthcare Materials

Functional 3D Neural Mini-Tissues from Printed Gel-Based Bioink and Human Neural Stem Cells

(2016) Qi Gu et al.   Advanced Healthcare Materials

Extrusion-Based 3D Printing of Poly(propylene fumarate) in a Full-Factorial Design

(2016) Jordan E. Trachtenberg et al.   ACS Biomaterials-Science & Engineering

Bioprinting the Cancer Microenvironment

(2016) Yu Shrike Zhang et al.   ACS Biomaterials-Science & Engineering

Extrusion-Based 3D Printing of Poly(propylene fumarate) in a Full-Factorial Design

(2016) Jordan E. Trachtenberg et al.   ACS Biomaterials Science & Engineering

Bioprinting the Cancer Microenvironment

(2016) Yu Shrike Zhang et al.   ACS Biomaterials Science & Engineering

Bioprinted 3D Primary Liver Tissues Allow Assessment of Organ-Level Response to Clinical Drug Induced Toxicity In Vitro

(2016) Deborah G. Nguyen et al.   PLoS One

How can macromolecular crowding inhibit biological reactions? The enhanced formation of DNA nanoparticles

(2016) Sen Hou et al.   Scientific Reports

Three-dimensional bioprinting using self-assembling scalable scaffold-free “tissue strands” as a new bioink

(2016) Yin Yu et al.   Scientific Reports

Research on the printability of hydrogels in 3D bioprinting

(2016) Yong He et al.   Scientific Reports

Three-Dimensional Printing of Hollow-Struts-Packed Bioceramic Scaffolds for Bone Regeneration

(2015) Yongxiang Luo et al.   ACS Applied Materials & Interfaces

A hydrogel bioink toolkit for mimicking native tissue biochemical and mechanical properties in bioprinted tissue constructs

(2015) Aleksander Skardal et al.   Acta Biomaterialia

Bioprintable, cell-laden silk fibroin–gelatin hydrogel supporting multilineage differentiation of stem cells for fabrication of three-dimensional tissue constructs

(2015) Sanskrita Das et al.   Acta Biomaterialia

Rapid 3D Extrusion of Synthetic Tumor Microenvironments

(2015) Joshua M. Grolman et al.   ADVANCED MATERIALS

Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low-Viscosity Bioink

(2015) Cristina Colosi et al.   ADVANCED MATERIALS

Direct 3D Printing of Shear-Thinning Hydrogels into Self-Healing Hydrogels

(2015) Christopher B. Highley et al.   ADVANCED MATERIALS

A Multimaterial Bioink Method for 3D Printing Tunable, Cell-Compatible Hydrogels

(2015) Alexandra L. Rutz et al.   ADVANCED MATERIALS

3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures

(2015) Sungmin Hong et al.   ADVANCED MATERIALS

3D Bioprinting Human Chondrocytes with Nanocellulose–Alginate Bioink for Cartilage Tissue Engineering Applications

(2015) Kajsa Markstedt et al.   BIOMACROMOLECULES

A bio-inspired, microchanneled hydrogel with controlled spacing of cell adhesion ligands regulates 3D spatial organization of cells and tissue

(2015) Min Kyung Lee et al.   BIOMATERIALS

Extracellular matrix deposition of bone marrow stroma enhanced by macromolecular crowding

(2015) Marina C. Prewitz et al.   BIOMATERIALS

3D bioprinting of neural stem cell-laden thermoresponsive biodegradable polyurethane hydrogel and potential in central nervous system repair

(2015) Fu-Yu Hsieh et al.   BIOMATERIALS

3D printing of layered brain-like structures using peptide modified gellan gum substrates

(2015) Rodrigo Lozano et al.   BIOMATERIALS

Direct laser writing: Principles and materials for scaffold 3D printing

(2015) Alexandros Selimis et al.   MICROELECTRONIC ENGINEERING

Dynamic phototuning of 3D hydrogel stiffness

(2015) Ryan S. Stowers et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

A 3D bioprinting exemplar of the consequences of the regulatory requirements on customized processes

(2015) Paul Hourd et al.   Regenerative Medicine

Three-dimensional cage-like microscaffolds for cell invasion studies

(2015) Barbara Spagnolo et al.   Scientific Reports

Controlling Shear Stress in 3D Bioprinting is a Key Factor to Balance Printing Resolution and Stem Cell Integrity

(2015) Andreas Blaeser et al.   Advanced Healthcare Materials

3D printing technology to control BMP-2 and VEGF delivery spatially and temporally to promote large-volume bone regeneration

(2015) Ju Young Park et al.   Journal of Materials Chemistry B

An overview of the suitability of hydrogel-forming polymers for extrusion-based 3D-printing

(2015) D. M. Kirchmajer et al.   Journal of Materials Chemistry B

Writing in the granular gel medium

(2015) T. Bhattacharjee et al.   Science Advances

Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels

(2015) T. J. Hinton et al.   Science Advances

Hydrogel: Preparation, characterization, and applications: A review

(2015) Enas M. Ahmed   Journal of Advanced Research

Bioprinting-Based High-Throughput Fabrication of Three-Dimensional MCF-7 Human Breast Cancer Cellular Spheroids

(2015) Kai Ling et al.   Engineering

Optimum 3D Matrix Stiffness for Maintenance of Cancer Stem Cells Is Dependent on Tissue Origin of Cancer Cells

(2015) Esmaiel Jabbari et al.   PLoS One

Tuning the architecture of three-dimensional collagen hydrogels by physiological macromolecular crowding

(2014) Jean-Yves Dewavrin et al.   Acta Biomaterialia

Self-crosslinked oxidized alginate/gelatin hydrogel as injectable, adhesive biomimetic scaffolds for cartilage regeneration

(2014) Biji Balakrishnan et al.   Acta Biomaterialia

The need for complex 3D culture models to unravel novel pathways and identify accurate biomarkers in breast cancer

(2014) Britta Weigelt et al.   ADVANCED DRUG DELIVERY REVIEWS

3D Bioprinting of Vascularized, Heterogeneous Cell-Laden Tissue Constructs

(2014) David B. Kolesky et al.   ADVANCED MATERIALS

Biomaterials for Integration with 3-D Bioprinting

(2014) Aleksander Skardal et al.   ANNALS OF BIOMEDICAL ENGINEERING

Quantitative exploitation of PFG NMR and MRI velocimetry data for the rheological study of yield stress fluid flows at macro- and micro-scales in complex geometries

(2014) T. Chevalier et al.   EXPERIMENTS IN FLUIDS

Engineering anatomically shaped vascularized bone grafts with hASCs and 3D-printed PCL scaffolds

(2014) Joshua P. Temple et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

In vitroevaluation of carbon-nanotube-reinforced bioprintable vascular conduits

(2014) Farzaneh Dolati et al.   NANOTECHNOLOGY

3D bioprinting of tissues and organs

(2014) Sean V Murphy et al.   NATURE BIOTECHNOLOGY

Fixing problems with cell lines

(2014) Jon R. Lorsch et al.   SCIENCE

Three-dimensional printing of Hela cells for cervical tumor modelin vitro

(2014) Yu Zhao et al.   Biofabrication

Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels

(2014) Luiz E Bertassoni et al.   Biofabrication

Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink

(2014) Falguni Pati et al.   Nature Communications

Integrated bioprinting and imaging for scalable, networkable desktop experimentation

(2014) Nathan D. Orloff et al.   RSC Advances

Sintering of inkjet printed silver tracks with boiling salt water

(2014) Juuso Olkkonen et al.   Journal of Materials Chemistry C

Strategies for directing the structure and function of three-dimensional collagen biomaterials across length scales

(2013) B.D. Walters et al.   Acta Biomaterialia

An estimation of the number of cells in the human body

(2013) Eva Bianconi et al.   ANNALS OF HUMAN BIOLOGY

Differential regulation of stiffness, topography, and dimension of substrates in rat mesenchymal stem cells

(2013) Zhan Li et al.   BIOMATERIALS

The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability

(2013) Thomas Billiet et al.   BIOMATERIALS

Rheology of semi-solid fresh cement pastes and mortars in orifice extrusion

(2013) Xiangming Zhou et al.   CEMENT & CONCRETE COMPOSITES

Facile fabrication of uniform size-controlled microparticles and potentiality for tandem drug delivery system of micro/nanoparticles

(2013) Shintaroh Iwanaga et al.   COLLOIDS AND SURFACES B-BIOINTERFACES

Stiffness of tumours measured by shear-wave elastography correlated with subtypes of breast cancer

(2013) Jung Min Chang et al.   EUROPEAN RADIOLOGY

Gelatin-Methacrylamide Hydrogels as Potential Biomaterials for Fabrication of Tissue-Engineered Cartilage Constructs

(2013) Wouter Schuurman et al.   MACROMOLECULAR BIOSCIENCE

Molecular crowding shapes gene expression in synthetic cellular nanosystems

(2013) Cheemeng Tan et al.   Nature Nanotechnology

Regenerative Therapies for Central Nervous System Diseases: a Biomaterials Approach

(2013) Roger Y Tam et al.   NEUROPSYCHOPHARMACOLOGY

Tissue Engineered Skin Substitutes Created by Laser-Assisted Bioprinting Form Skin-Like Structures in the Dorsal Skin Fold Chamber in Mice

(2013) Stefanie Michael et al.   PLoS One

Understanding the Impact of 2D and 3D Fibroblast Cultures on In Vitro Breast Cancer Models

(2013) Kyung Eun Sung et al.   PLoS One

A Tissue-Like Printed Material

(2013) G. Villar et al.   SCIENCE

Measuring the surface tension of yield stress fluids

(2013) J. Boujlel et al.   Soft Matter

Biofabrication of multi-material anatomically shaped tissue constructs

(2013) Jetze Visser et al.   Biofabrication

Quantitative optimization of solid freeform deposition of aqueous hydrogels

(2013) K H Kang et al.   Biofabrication

Bio-ink properties and printability for extrusion printing living cells

(2013) Johnson H. Y. Chung et al.   Biomaterials Science

Rapid Fabrication of Complex 3D Extracellular Microenvironments by Dynamic Optical Projection Stereolithography

(2012) A. Ping Zhang et al.   ADVANCED MATERIALS

Characterization of Methacrylated Type-I Collagen as a Dynamic, Photoactive Hydrogel

(2012) Ian D. Gaudet et al.   Biointerphases

Cells (MC3T3-E1)-Laden Alginate Scaffolds Fabricated by a Modified Solid-Freeform Fabrication Process Supplemented with an Aerosol Spraying

(2012) SeungHyun Ahn et al.   BIOMACROMOLECULES

A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering

(2012) Thomas Billiet et al.   BIOMATERIALS

Application of visible light-based projection stereolithography for live cell-scaffold fabrication with designed architecture

(2012) Hang Lin et al.   BIOMATERIALS

Synergistic action of fibroblast growth factor-2 and transforming growth factor-beta1 enhances bioprinted human neocartilage formation

(2012) Xiaofeng Cui et al.   BIOTECHNOLOGY AND BIOENGINEERING

Accelerated myotube formation using bioprinting technology for biosensor applications

(2012) Xiaofeng Cui et al.   BIOTECHNOLOGY LETTERS

A simple improved mathematical model for polytetrafluoroethylene (PTFE) paste extrusion

(2012) Hesam Anvari Ardakani et al.   CHEMICAL ENGINEERING SCIENCE

3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels

(2012) Bin Duan et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Cell(MC3T3-E1)-Printed Poly(ϵ-caprolactone)/Alginate Hybrid Scaffolds for Tissue Regeneration

(2012) HyeongJin Lee et al.   MACROMOLECULAR RAPID COMMUNICATIONS

The Cancer Cell Line Encyclopedia enables predictive modelling of anticancer drug sensitivity

(2012) Jordi Barretina et al.   NATURE

Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology

(2012) Xiaofeng Cui et al.   TISSUE ENGINEERING PART A

Coordinating genome expression with cell size

(2012) Samuel Marguerat et al.   TRENDS IN GENETICS

Characterizing the effects of cell settling on bioprinter output

(2012) Matthew E Pepper et al.   Biofabrication

Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds

(2012) L A Hockaday et al.   Biofabrication

Bioprinted Amniotic Fluid-Derived Stem Cells Accelerate Healing of Large Skin Wounds

(2012) Aleksander Skardal et al.   Stem Cells Translational Medicine

Omnidirectional Printing of 3D Microvascular Networks

(2011) Willie Wu et al.   ADVANCED MATERIALS

Effect of needle geometry on flow rate and cell damage in the dispensing-based biofabrication process

(2011) Minggan Li et al.   BIOTECHNOLOGY PROGRESS

Alginate: Properties and biomedical applications

(2011) Kuen Yong Lee et al.   PROGRESS IN POLYMER SCIENCE

Distinct Tissue Formation by Heterogeneous Printing of Osteo- and Endothelial Progenitor Cells

(2011) Natalja E. Fedorovich et al.   TISSUE ENGINEERING PART A

Cell patterning technologies for organotypic tissue fabrication

(2011) Bertrand Guillotin et al.   TRENDS IN BIOTECHNOLOGY

Molecularly designed alginate hydrogels susceptible to local proteolysis as three-dimensional cellular microenvironments

(2010) Keila B. Fonseca et al.   Acta Biomaterialia

Cell-laden microengineered gelatin methacrylate hydrogels

(2010) Jason W. Nichol et al.   BIOMATERIALS

Bioprinting vessel-like constructs using hyaluronan hydrogels crosslinked with tetrahedral polyethylene glycol tetracrylates

(2010) Aleksander Skardal et al.   BIOMATERIALS

An cell-assembly derived physiological 3D model of the metabolic syndrome, based on adipose-derived stromal cells and a gelatin/alginate/fibrinogen matrix

(2010) Mingen Xu et al.   BIOMATERIALS

The effect of immobilized RGD peptide in macroporous alginate scaffolds on TGFβ1-induced chondrogenesis of human mesenchymal stem cells

(2010) Tali Re’em et al.   BIOMATERIALS

Bioactive modification of poly(ethylene glycol) hydrogels for tissue engineering

(2010) Junmin Zhu   BIOMATERIALS

The use of human mesenchymal stem cells encapsulated in RGD modified alginate microspheres in the repair of myocardial infarction in the rat

(2010) Jiashing Yu et al.   BIOMATERIALS

Laser assisted bioprinting of engineered tissue with high cell density and microscale organization

(2010) Bertrand Guillotin et al.   BIOMATERIALS

Bioprinting Endothelial Cells With Alginate for 3D Tissue Constructs

(2010) Saif Khalil et al.   JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME

Collagen type I hydrogel allows migration, proliferation, and osteogenic differentiation of rat bone marrow stromal cells

(2010) Eric Hesse et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

The extracellular matrix at a glance

(2010) C. Frantz et al.   JOURNAL OF CELL SCIENCE

Solid-liquid transition and rejuvenation similarities in complex flows of thixotropic materials studied by NMR and MRI

(2010) S. Rodts et al.   PHYSICAL REVIEW E

Photocrosslinkable Hyaluronan-Gelatin Hydrogels for Two-Step Bioprinting

(2010) Aleksander Skardal et al.   TISSUE ENGINEERING PART A

Effects of surfactant and gentle agitation on inkjet dispensing of living cells

(2010) Shabnam Parsa et al.   Biofabrication

Biomatrices and biomaterials for future developments of bioprinting and biofabrication

(2010) M Nakamura et al.   Biofabrication

Collagen Structure and Stability

(2009) Matthew D. Shoulders et al.   Annual Review of Biochemistry

Organ printing: Tissue spheroids as building blocks

(2009) Vladimir Mironov et al.   BIOMATERIALS

In vitro engineering of human ear-shaped cartilage assisted with CAD/CAM technology

(2009) Yu Liu et al.   BIOMATERIALS

Characterization of cell viability during bioprinting processes

(2009) Kalyani Nair et al.   Biotechnology Journal

Rheological behavior of alginate solutions for biomanufacturing

(2009) Rodrigo Alvarenga Rezende et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Direct Fabrication of a Hybrid Cell/Hydrogel Construct by a Double-nozzle Assembling Technology

(2009) Shengjie Li et al.   JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS

Encapsulation of curcumin in alginate-chitosan-pluronic composite nanoparticles for delivery to cancer cells

(2009) Ratul Kumar Das et al.   Nanomedicine-Nanotechnology Biology and Medicine

The cancer genome

(2009) Michael R. Stratton et al.   NATURE

Designed Three-Dimensional Collagen Scaffolds for Skin Tissue Regeneration

(2009) SeungHyun Ahn et al.   TISSUE ENGINEERING PART C-METHODS

Laser Printing of Skin Cells and Human Stem Cells

(2009) Lothar Koch et al.   TISSUE ENGINEERING PART C-METHODS

Thixotropy

(2008) Jan Mewis et al.   ADVANCES IN COLLOID AND INTERFACE SCIENCE

Multi-layered culture of human skin fibroblasts and keratinocytes through three-dimensional freeform fabrication

(2008) Wonhye Lee et al.   BIOMATERIALS

Development of Three-Dimensional Alginate Encapsulated Chondrocyte Hybrid Scaffold Using Microstereolithography

(2008) Seung-Jae Lee et al.   JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME

Yield stress and elastic modulus of suspensions of noncolloidal particles in yield stress fluids

(2008) Fabien Mahaut et al.   JOURNAL OF RHEOLOGY

Proliferation and osteogenic differentiation of human bone marrow stromal cells on alginate-gelatine-hydroxyapatite scaffolds with anisotropic pore structure

(2008) A. Bernhardt et al.   Journal of Tissue Engineering and Regenerative Medicine

Comparative Proteomic Phenotyping of Cell Lines and Primary Cells to Assess Preservation of Cell Type-specific Functions

(2008) Cuiping Pan et al.   MOLECULAR & CELLULAR PROTEOMICS

Inkjet printing as a deposition and patterning tool for polymers and inorganic particles

(2008) Emine Tekin et al.   Soft Matter

Effects of Dispensing Pressure and Nozzle Diameter on Cell Survival from Solid Freeform Fabrication–Based Direct Cell Writing

(2008) Robert Chang et al.   TISSUE ENGINEERING PART A